Fix it is centered displays error 0x803C0107 when running diagnose files and folders

Similar Questions

• Photoshop continues to display 'error strtable' when opening PSD files?

  I'm on a new model race 2013 end close MBP/OS 10.9.4 CC2014.

  Anyone encounter this and whether it's a Mac OS or an Adobe issue... or better yet, what it is and how to fix it? A quick search advice that it could be linked to the wrong file extension used, but these files are all standard PSDs with the correct file extension. Several were recently created by using the app CC2014 PS new-to-me that I use to open them, so at first glance CS-> CC version compatibility issues seem unlikely.

  So far I was always able to open PSD ignoring and clicking files on through the warnings, but it obviously does not encourage a relaxed ;-) mindset

  Thanks for the suggestions Arpit - they helped me to find and solve the problem.

  Results as shown below. I knew that the problem could be text/fonts related so additional steps.

  -Creation of new file

  -J' stop PS

  -Open file > OK

  -Added text editable in the file

  -J' stop PS

  -Opening file: error strtable

  -Reboot the machine

  -Opening file: error strtable

  -Reset PS preferences

  -Opening file: error strtable

  -Open plugin disabled mode

  -Open file > OK

  -Removed plugin FontExplorer

  -Open file > OK

  -J' stop PS

  -Reinstalled FontExplorer plugin

  -Open the test file & others with editable text > OK

  So, in the end, the problem was with the FontExplorer plugin and which replaces the fixed.

  Thanks again for the help.

• Microsoft Fix Center 0 X 80092003 error message when you try to fix the hardware and drivers, the program does not work

  Microsoft Fix Center 0 X 80092003 error message when you try to fix the hardware and drivers, the program does not work. I use Windows Vista Home top.  Please provide me with a fix for this problem. Thank you

  Hello

  What type of material is actually causing the problem? Is there more information the Fix It center offers you?
  I would have a look at the article I have below the link and go ahead and run a update of Windows on the PC.
  http://support.Microsoft.com/kb/947821
  I hope this helps.

• My phone displays an error message on the startup file and it mentions the installation media, how can I solve this problem?

  Separated from this thread.

  My phone displays an error message on the startup file and it mentions the installation media, how can I solve this problem?

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  There are several methods to reinstall Vista.

  This can help you (download files and make your own DVDs):

  http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links

  And here are instructions on how to burn ISO disk images:

  http://www.SnapFiles.com/get/isorecorder.html

  The download links and information on how to make the ISO file, and then create the Setup DVD above are at this link:

  "How to download a Vista ISO and create a Setup DVD or USB"

  http://www.Vistax64.com/tutorials/301852-Vista-ISO-download-create-installation-DVD-USB.html

  "How to create a USB of Vista Installation key '

  http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html

  ___________________________________

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  ___________________________________

  And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Them or us ask the right sequence of key.

  ___________________________________

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Process Explorer error BES when you try to browse the files and folders; and Internet Explore AppHangB1 when you try to attach files to download in Windows 7.

  Hi everyone, auggy,

  I really hope you can help me with a problem I have on a single workstation at my office.  It is an accumulation of 32-bit Windows 7 running MS Office 2010 Standard.  It differs from other generations in our office because it is used by the head of the team of our accounts, and so it has a number of custom pieces of software that she only needs access (payroll software, etc.).

  All the basic features of the computers seem to be well, except the two following, and I would really like to help get to the bottom of it.

  (1) process explorer error when you try to browse the files and folders of BES.

  I can call Windows Explorer absolutely perfect and be sailing away on his machine, and then suddenly the process explore will die, with the following error: -.

  Signature of the problem:

  Problem event name: BEX

  Application name: explorer.exe

  Application version: 6.1.7601.17567

  Application timestamp: 4d6727a7

  Fault Module name: StackHash_0a9e

  Fault Module Version: 0.0.0.0

  Fault Module Timestamp: 00000000

  Exception offset: 03e2f944

  Exception code: c0000005

  Exception data: 00000008

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 2057

  Additional information 1: 0a9e

  More information 2: 0a9e372d3b4ad19135b953a78882e789

  Additional information 3: 0a9e

  Additional information 4: 0a9e372d3b4ad19135b953a78882e789

  Read our privacy statement online:

   http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\system32\en-US\erofflps.txt

  I can start windows Explorer, and it will happen again--it's a repetitive event.

  (2) Internet Explorer AppHangB1 when you try to attach files to download

  I think that these two errors may actually be related, like IE (and Chrome as well by the way, this be why I think that the two issues are related) works fine, until I just any type of site where I need to download a file.  This happened in the light, as our Chief of accounts needs to download a flat file in a room online banking software.  What's going to happen (and, again, this can be repeated as needed) is: -.

  (a) you need to click on which will generally be a "Browse" button

  (b) a traditional dialog box opens, but instead which allows you to navigate to the location and select the folder you want, he immediately greys out as if the process explore is falling.

  (c) shortly after, the following error is returned: -.

  Description:

  A problem caused this program blocking interact with Windows.

  Signature of the problem:

  Problem event name: AppHangB1

  Application name: iexplore.exe

  Application version: 11.0.9600.16521

  Application timestamp: 53114399

  Hang Signature: ffae

  Hang Type:                                          513

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 2057

  Signing of additional blocking 1: ffaeadd6649c2780023c6d9ea230850d

  Signing of additional blocking 2: e32d

  Signing of additional blocking 3: e32d1064528f9bd1cbe46cdd0db7b0f1

  Signature of blocking additional 4:0498

  Signing of additional blocking 5: 0498e046eb6db4d68a7cd9b11dab2644

  Signing of additional blocking 6: effb

  Signing of additional blocking 7: effb796b5c1ff7f6708d2722fa7c24bd

  Read our privacy statement online:

   http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\system32\en-US\erofflps.txt

  On auggy recommendation, I've set up a registry key insert that returns the explorer.exe hangs in a dump file, and I am trying to load two reports on SkyDrive - I'll post the URL in this thread as soon as I finished it.

  Can someone help me please?

  Thank you very much!!

  David.

  Hi auggy, Andy,.

  Well... in a way, I am very disappointed, but we will respond to it.

  Andy, I checked and iCloud, Control Panel has not been installed on its terminal, but thank you very much for suggesting it :)

  auggi, when I got back on my colleague's PC, I thought I would test to see if the feature didn't always before considering saving data dumps etc, and it worked fine!

  I left it overnight with instructions for the lady who uses the PC to test this morning and see if it's all workers, and it is still, it seems that the fix does not immediately solve the problem of browser, but there later - maybe after a second reboot or something... very strange!

  In all case, this matter can now be considered closed, so all that remains for me to say thank you very much for your help, you are amazing :)

  All the best, very, very,.

  David.

• Error messages when you move files PSE13 and PSE14

  I am reorganizing my records of PSE 14.1 (and a few hours before using the PES 13) on Windows 10. This means that I'm moving them from one disk to another using the view of folders on the left panel of the PES.

  Everything goes very well with the first shift after the launch of PSE. No error message and the files in the folder find you in the right place with the folder.

  But for much of the subsequent move there is several error message boxes that must be pressed one by one to move forward. Much more than the number of files involved. However, ultimately files and folders get into their expected places. But with dozens and dozens of needless (?) Click on the OK button.

  Error messages that I see are

  • "A folder with the same name already exist in the requested location" - which is patently false, as I'm only moving called records and verifying that I won't have existing folders with the same name instead of the target. The record was 16 photos inside and the message popped up 55 times.
  • "The operation could not be performed. "The error occurred because of invalid characters, read only location or existing folder with the same name"-this comes very often after the message stated above, but not always. And in multiples as well.

  And every now and then the move operation is going well through.

  I tried to understand if there is a model - but nothing so far... I use no "special characters" in the filenames etc...

  Is there another way to move the folders? Is there a solution to this behavior?

  juhar76990688 wrote:

  Looks like I have at least found a way easier and more predictable and easier to reorganize my files: travel using Windows file / folder management tools-, then to reconnect files from PSE. In this way, I know how many dialog boxes, I need to treat every step - and it is much less than the way PES...

  Yes, it was what I was going to suggest it.

  I did not PSE14 because I'm away from home now. I've already met these messages before, and I think you are right that the first time you move a folder to a new empty destination tree, you do not have problems. I would not be surprised if there was a real bug in the display of folders when you move files repeatedly, but I was not able to reproduce the problem. A possible source of problems would be the way the folder hierarchy is updated in elements; I guess that to keep this folder updated tree, there is a procedure of "cache" to speed up the process (folders display in the tree should work with an image of the Explorer, supplemented by information in the catalog itself). Older versions were very buggy in folders view, but I'm not sure that the current version (since PSE11) is absolutely foolproof.

  Move the folders step by step from the Explorer and reconnect immediately seem to be the best in your case.

• With premiere pro cc2015 why can I get this error message when reading 'timers video and audio are not synchronized?

  With premiere pro cc2015 why can I get this error message when reading 'timers video and audio are not synchronized?

  Hello

  Here are the steps.

  Install a cable Audio virtual on your machine:

  http://virtual-audio-cable.en.softonic.com/

  Under HW Audio Configuration configured Virtual audio cable as default input device

  And value clock maser virtual audio cable and try reading.

  This issue with the message 'Audio material e/s overloaded at 00' can be fixed, follow these steps.

  Vinay

• CC of Dreamweaver generates one of the 3 error messages when you use find and replace on 8.1 Win 64 bit.

  CC of Dreamweaver generates one of the 3 error messages when you use find and replace is used more than twice in a row. "While executing onLoad in bc_afterSave.htm, the following JavaScript error occurred: at line 188 of file C:\Program Files (x 86) \Adobe|. Adobe DreamweaverCC | Configuration | Shared | ' BC\JS\bc_sites.js': out of memory.

  or

  When executing RunCommand in File_Save.htm, a JavaScript erroroccurred.

  or

  While exciting getDynamicContent inAdressURL.htm, an erroroccirred of Javascript.

  Any thought - I find myself CBWMS of closing and reopening. Will work for the other two find and replace once again before the popup of messaged\s error.

  Cough, cough, cough - 38 500 pages? !  Really?  It's a big site!

  I'm not surprised, that you are short of memory.  Try to limit your F & R records or select files rather than the entire Site.

  Nancy O.

• Still cannot run Premiere Pro 2015 because 'Cannot find device of appropriate reading' is always on display. I can run PP 2014 and all the other programs of cloud of 2015 but not PP2015.

  Still cannot run Premiere Pro 2015 because 'Cannot find device of appropriate reading' is always on display. I can run PP 2014 and all programs of cloud 2015 but not PP2015. When I got this error, I had a mid-2012 Mac Pro running El Capitan 10.11.2 and an Apple ATI Radeon HD5770.  You can't update the drivers with Apple, but El Capitan should have giving me the latest video drivers.

  First try to open but after loading everything it errored out with the "can't find a video playback device adapted." A very cryptic message in my way of thinking. They mean the monitor, video card or what?  In any case, I decided that I must have my video card, so I bought a 4 GB Nvidia GTX 970 MacCards.com card, put it in and got the latest drivers for it, than MacCards.com current guard.  This resulted in no gain. Always the same result right along with the exact error even after loading the PP2015.

  I reinstalled PPCC2015 yesterday and it still loads but never opens and gives me the same error.  I feel like even if I bought a new MacPro and reloaded all software CC, I'd still have the same result. Very depressed of not being able to run the software I pay for every month.

  In the finder menu, click and hold down the menu REACH. That hold the option key and the library user will appear. Click on the user's library.

  In this folder, go to preferences and find the adobe folder.

  Right-click on the adobe folder and click get info.

  In the permissions section, & sharing, there are three names.

  Everyone should say read & write beside them.

  Open the lock, turn all to read and write.

  Then click on the little train directly under the names or to the left of the lock and the menu drop down click on 'apply to the included items.

  Then relock the lock.

  Now, go to your OS hard drive and click on users, your user name, Documents.

  Find the adobe folder there.

  Right-click on the adobe folder and click get info.

  In the permissions section, & sharing, there are three names.

  Everyone should say read & write beside them.

  Open the lock, turn all to read and write.

  Then click on the little train directly under the names or to the left of the lock and the menu drop down click on 'apply to the included items.

  The lock, the lock again.

  Wait a minute. Then launch first.

  This fixed it for me.

• problem with the Finder - files and folders displaying incorrectly

  After acquiring a new iMac, I noticed a problem with the Finder - files and folders are displayed wrong (see table).

  This is what happens always after the files have been transferred from one folder to another. I was reminded of my days of using Mac OS in the 1980s when automatic setting of files was not so "automatic." I use Mac OS for decades and I don't remember the last time I had to think about GUI problems like that.

  Other problems in the graphical display of files and folders were introduced, such as when you have hundreds of files in a single folder, you end up deleting about 30 to 40 of them say in a particular section, and you end up with gaps of the ChartSpace where files used to be, that is the remaining files automatically rearrange themselves (fill in these gaps) - never. A week later, you open the folder, and the gap of GUI is still there.

  I decided to do a clean install of the operating system but nothing works.

  Is there some setting in Prefs I'm missing?

  

  Hi there highland99,

  Looks like your folder icons are not accommodating themselves automatically you plan to do. To me, this indicates that you have organize by the None value in the view menu. You can change the way files and folders are prepared automatically by clicking on view > reorganize by and selecting how you would like that fixed.

  Thank you for using communities of Apple Support.

• Re: Qosmio G - hidden files and folders is not displayed

  Hi people, I have a few hidden files and folders, which I was able to access the front and I used to click on the "organize tab" display, advanced settings, display the files and folders to hide or show hidden files.

  Unfortunately, there seems to be a problem, I just can't access my hidden files and folders, even when I go through this method.
  someone help me please as soon as possible...

  Thank you

  Hi aaz911,

  First of all, it would be nice of you if you post information on your laptop model and the operating system. This must be done always to get a detailed response.

  In any case, I never heard of this problem, but make sure that all files will be displayed:
  Start Windows Explorer > tools > Folder Options > view and enable the following options:
  -Files and folders hidden: display the hidden files and folders
  -Hide protected operating system files (this should be disabled > unbranded).

  In addition you will find these missing files by using Windows search?

  If this isn't the case, I suppose the files are deleted from someone or due to a virus. :(

• To access the files and folders from the hard drive Windows 7 on Windows XP, access denied error message.

  Original title: portable destroyed - need for car access

  I don't know if this is the right forum - please advice if it is not.

  My friend's laptop computer was destroyed in a car accident. I pulled the drive and placed it in my desktop XP system and the drive appear in good health. However, I received permission issues trying to access records on the disk and thought that it was because of me using Win XP and the laptop was Win7x64. My questions below are based on the assumption that I'm not able to access these files on my Win XP system. If this assumption is incorrect, so please let me know.

  I have a laptop that I don't use and put the disk in it. I was hoping it would be plug and play all the new material, but after reading a little online, I know that this is not the best thing to do and will probably not work as did the earlier versions of Windows.

  In the end, I care retrieves the contents of the disc, although it would be great if I could lend my laptop for a few weeks with "its files" until it sorts how to replace the laptop.

  Can I get the player Win7x64 working on the laptop computer of replacement by reinstalling Win7x64 on this laptop? I'm not "means a clean install/reformat, but have rather the Setup program detects an existing installation, and do its magic to get the operating system runs on new hardware?"

  I know that this raises questions of MS licenses. If the installation process could get his old system running on the laptop replacement, if I have a small window of time completely to access his files before being forced to re-register the OS? I'm hoping so.

  I'm looking for only a short-term solution - I do not recommend that he hopes that drive long term because the laptop got quite truncated of the accident, and once he gets a new laptop it will have everything he needs on this subject (OS, licenses, etc.). If I have a small window of time where I can simply copy their important files, or to lend him my laptop with its player and him can bring to its domestic network and the print out of all the things that are important, that it's going to be all together to move them to a new laptop when it is available.

  Thank you

  Hello

  You experience this problem because of the permissions applied to these s folder.  To resolve this problem, you will need to take ownership of these files and folders.

  Method 1: You can follow the steps mentioned in the link below to take possession of the records

  Troubleshoot "access denied" when opening files or folders

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  (Article above applies to Windows Vista, not valid for Windows XP)

  Also check out the article below

  How to capture a file or a folder in Windows XP
  http://support.Microsoft.com/kb/308421

  Method 2:  You can try a custom installation (not a format\clean facility).

  See the link below for custom installation
  using the install option custom without formatting the hard drive

  Note: In custom installation only data would be transferred in Windows. Drivers, applications and the old folder will need to be reinstalled.

• What people are included in "Level 1 Administrator permissions?" when the configuration file and network share permissions?

  I'm trying to figure out how to set the level of permissions for my files and folders. But I also understand exceptions to the permissions of level 1 and level 2. I've never used a "network of the computer at work." I've only used a "network of computers at school. So I have only a limited understanding of what means "administrator." At home, when I'm sitting at my computer, which is not connected to a network to work, or school, I'm the 'administrator' on my computer. This is because I created the "user account" through the steps required to create an account on my computer, and I assigned a password to the account. Only, I can read and write to files and folders that I created in the folder "My Documents" from my user account. At least I have change permissions and file sharing, all files and folders in the "My Documents" folder are private (level 1) and no one else can read or write on my files. I have 'full control '.

  However, if I'm on a computer at work or at school, even if I am the "owner/creator" of my files and folders, there is another person (my boss or my teacher) for example, which is the 'network administrator.' Presumably, this person has access to my files and folders and share a total control over them. If that's true, how someonewho is not the creator of the file or folder access? If anyone else can have total control over my files and folders at school or work, which keeps an unknown person to access my files and folders on my computer a home. What I mean is this: if I change the permissions to allow someone else to read and write in my files and folders, which prevents an unauthorized person by performing the same steps to access my files and folders? My question is about operating systems, I learn all that is Windows XP Pro and Windows Vista SP2.

  Hello

  Log on to this page and scroll through the following screens.

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;304040

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Change the highlight color when you select files or folders

  Hello
  Need assistance to change the highlight color when you select files or folders in Windows Explorer / my document.
  I use Windows Vista with SP2.  I tried to go to control-online personalization panel => color & appearance of the window and changing the settings.  However, I can't change the intensity of the highlights that I see it clearly.  A little blind colours, I would like to change the color to make it darker so that I could clearly see when an item is selected.
  I tried open classic appearance for color options properties more-online advance but did not find an appropriate under "Item" option that I could change.  I tried the step "Selected items" under ' point:' but that only applies when I double click on a file or folder.
  Any advice would be greatly appreciated.
  The

  Salvation of

  Sorry to hear that the option is good enough for you.  I've done some research more and that you still do not see a way to change what you're asking.  As I said before, others have mentioned this issue as well.  If I come across a way to do it, I'll post it here.

  In the meantime, I'm going to Mark this post as answer whose answer is:

  Currently, there is no way to make this change in Windows Vista.

  Thanks for posting on Microsoft Answers.
  Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When you run the virus scan, the majority of the files and folders showing locked and impossible to scan in Vista

  When I run my anti-virus, it tells me that almost all my folders and files, or are locked and is not be scanned... How to unlock folders or files that I have windows vista 64-bit

  * original title - how to unlock files and folders on my windows vista 64 bit computer when I run my anti-virus scan all folders and files are locked *.

  Hello

  ·         What program Antivirus do you use?

  This problem may also come from Virus/Malware infection on the system.

  I suggest you to run the Microsoft Safety Scanner and check if that helps resolve the issue.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  Note:

  The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.