FIXED! Click on features disabled community on the upgrade of Windows 10... FIXED!

Similar Questions

• Disable communication between the host and the virtual machine

  I have VM Server 2.0 and one of the virtual machines has the same name as the server and even if the virtual computer is connected to the host only network it generates the Windows error message: duplicate names exist on the network.

  is there a way to disable communication between the host and the virtual machines? I just need a virtual network that is isolated from my network complete and host also.

  Thank you.

  The GUI Server2 is not to choose the other unused vmnets.  Then edit your file VMX use a different vmnet of 0, 1 or 8.  (which are bridged, host-only and NAT)

  Thus, for example, if your VMX has a line that says:

  Ethernet0.VNET = "VMNet0.

  change to:

  Ethernet0.VNET = "VMNet2.

  (This assumes that you have not used the network Editor to fill the vmnet2 either).

• My 80071aa7 error will be fixed by the upgrade to windows 7?

  I was not able to get any microsoft vista updates from my HP Pavilion laptop for over a year.
  The error is '80071aa7' which tries to update, do not and then try to update on every restart, and fails again and again.

  I want to upgrade to Windows 7 soon brings me to my question:

  The upgrade to windows 7 will fix the problem or I have to get it fixed before the update.

  Note: I found a solution for vista on RunonFriday.com blog, but it is a long process which seems to be the solution above my head.  Me would rather not attack is if Windows 7 will fix it anyway.

  Any thoughts?

  Hi lsawyer

  
  You try to use the steps below and check if these help. Also upgrade to Windows 7 should help you solve the problem-

   

  Method 1:
  You try to install the updates in a clean boot state to determine whether all non-Microsoft services interfere. To perform the clean boot follow step 1 mentioned in the article below, and then try again check in the clean boot state -

  http://support.Microsoft.com/kb/929135

  If the problem is resolved check which service non-Microsoft is the source of the problem; referring to article and following the other steps.
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  a. Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  b. on the general tab, click the Normal startup option and then click OK.

  c. When you are prompted to restart the computer, click on restart.

  Method 2:

  You can try to reset the Windows Update components and check if that helps. Follow the link given below to do the same.
  http://support.Microsoft.com/kb/971058

  Method 3:
  You can also follow the steps in the Microsoft article below and check if these help -.

  http://support.Microsoft.com/kb/949358

   

  I hope this helps.

• HP Photosmart C6280: cannot print on C6280 wireless after the upgrade to Windows 10

  Cannot print on C6280 wireless after the upgrade to Windows 10. Have removed the device, but try to re install the printer when is not found. Can print if I connect USB. Tried to reload the driver using HP Support software help, but when he arrives at the end of the download fails.

  Hi @Ron9871,

  Welcome to the Forums of HP Support!

  I see that you are unable to get your printer HP Photosmart C6280 wireless printing. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I would like to try the steps in this guide, "offline" Status Message printer (Windows 10).

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  • Print a Page of Network Configuration menu of the printer front panel. Note: the IPV4 IP.
  • Type the IP address in the browser to bring up the SAP.
  • Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  • Select Manual IP.
  • Enter your IP address manual (192.168.0.232)
  • Enter 255.255.255.0 for the subnet mask, except if it is different.
  • Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  • Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  • Click on apply.

  Please restart the router, the printer and the computer in this sequence.

  If you're still having problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  • Use the File Checker system to repair missing or corrupted system files. It's always a good idea to back up your data before proceeding.
  • File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.

  You can try to change your WSD printer port by a Standard TCP/IP port.

  To do this, you will need your current IP address printers.  The Network Setup page shows the parameters of network for the product. To print this page; Press the button of network () on the control panel of the product.

   

• Printer cannot communicate since the upgrade to windows 7

  My Lexmark x 4650 is unable to communicate since the upgrade from vista to Windows 7.  He asks me to authorize the communication of bidrectional, once I do this for a reason that it won't save any

  Your question is not Windows Update features (compared to the upgrade of Windows).

  Contact the Lexmark Support. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Pavilion dv6700 entertainment: loss of sound on pavilion dv6700 since the upgrade to Windows 10

  Since the upgrade to windows 10 I lost my audio... can not play MP3 music and the system sounds don't work... wanted for driver sound card and found three recommended... each of them has reported a hardware not found... decided to reinstall the driver of sound card on my install of windows 7, as luckily I backed up all my drivers before moving on to OS10... even if it is installed, still no sound... removed devices and drivers and let the laptop reinstall after rebooting... do not know what else to try... do not believe that there is a sound muting function key that I do not know... Thank you

  UPDATE...
  just try the idea of setting frequency to 16-bit 9600, but I got no sound error box [...], then is alle went settings improvements where she has low etc etc settings has been disabled so it allowed without choosing any of... then I went back and changed the default frequency which is 24 bit 19200... then told me not supported by this device but then miraculously it worked... have now all music sound restored windows all... don't know if still have windows 7 driver... it is MS 2008... really afraid to update the driver because it is all now work... don't know how I fixed it but, was it a particular action? or a combination...? Maybe this might help others...

• Problems with the upgrade from Windows Vista to Windows 7 error

  I try to upgrade Vista Business 32-bit Windows 7 Home Premium, but I get an error at the beginning of the installation message saying "Windows could not retrieve information about the disks on this computer.  After clicking on the close button, its takes me back to the opening screen.   Its a laptop with 3 GB of RAM.  The program compatibility tells that should work, can anyone help?

  Are you trying to upgrade Vista while it is running or are you boot from the Windows 7 DVD? Note: Windows 7 Home Premium requires an installation "Custom"and clean up as there is no path inplace upgrade (see below).»

  Windows 7 system requirements: http://windows.microsoft.com/en-US/windows7/products/system-requirements
  1 gigahertz (GHz) or faster 32-bit (x 86) or 64-bit (x 64) processor
  1 gigabyte (GB) of RAM (32-bit) or 2 GB RAM (64-bit)
  16 GB of disk space available (32-bit) or 20 GB (64-bit)
  (Note: 16 GB is a strict minimum and unrealistic, suggests at least 32 GB or more)
  Graphical device DirectX 9 with WDDM 1.0 or higher driver

  Windows 7 upgrade paths
  Microsoft has released a downloadable document from MS word with a list of paths to upgrade to Windows 7.
  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=e170eba1-5bab-401F-bbf5-00f0ee7fe0fb

  .

  Windows 7 upgrade paths
  http://TechNet.Microsoft.com/en-us/library/dd772579%28WS.10%29.aspx

  Decrypt Windows 7 upgrades: the official rankings
  http://mossblog.AllThingsD.com/20090804/deciphering-Windows-7-upgrades-the-official-chart/
  (Save the graphic, and then open it using a photo editing software or Viewer to expand to a size more readable)

  Which is right for you?
  http://Windows.Microsoft.com/en-us/Windows7/products/compare

  List feature that provides each edition of Windows 7:
  http://www.SevenForums.com/tutorials/14422-compare-Windows-7-editions.html

  Windows 7 Professional upgrade - Vista owners: be aware that the upgrade to Windows 7 Professional can be used only to perform a upgrade in place for computers that have Vista Business Edition. Unfortunately there is no indication on the box or retail in the EULA/license restrictions of invalid paths to upgrade to Windows 7 Professional.
  http://www.PAGESTART.com/windows7proupgade.html

  Users of Vista Home Basic, your choice of upgrade is: Windows 7 Home Basic Edition, Premium 7 or 7 Ultimate
  Users of Vista Home Premium, is your choice of upgrade: Windows 7 Home Premium or Ultimate 7

  Users of Vista Business, your choice of upgrade is: Windows 7 Professional, Ultimate or Enterprise
  

  Users of Vista Enterprise: only one way of upgrading that is: Windows 7 Enterprise
  Vista Ultimate users: once again as a way of upgrading that is: Windows 7 Ultimate.

  J W Stuart: http://www.pagestart.com

• MY PROBLEMS DURING THE UPGRADE TO WINDOW 10

  I received a notification to upgrade Windows 7 to 10 of the window. In may 2016, I started the process. I followed as a result dialog boxes that Windows 7 and downloaded Update window 10. Beginning of June, my PC me notified to the installation of window 10. When I clicked OK, a dialog box informed me that my PC will reboot several times.

  When he completed the first 100% and continued with another level of installation, to 32% he is static up to 3 hours when I noticed that my laptop batteries becomes excessively hot. I then turned off the batteries. When I powered up the PC again, it began to recover my Windows 7. From there he was showing me that my windows 7 is not genuine.

  Now I couldn't restart the upgrade from window 10.

  The PC is my desktop PC and I can't access the product key of window 7 for use in a revalidation. What should I do to get out of the mess.

  Not wise to interrupt an upgrade

  You even need to create a system image on a removable hard drive?

  Anyway now you will need to contact M$ using the activation of the phone and communicating with the manufacturing of the machine to sort the invalid license.

• I started the upgrade of Windows 10 to my Windows 7 to 15 hours; It downloads yet.

  * Original title: upgrade Windows 10

  I started the upgrade of Windows 10 to my Windows 7 to 15 hours; It downloads yet.  What is the problem?

  Run the Windows Update troubleshooting tool:

  http://go.Microsoft.com/?linkid=9830262

  Restart the computer, and then try again.

  Cancel the upgrade, and then update manually:

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  How to create an ISO or USB drive.

  Select upgrade this PC now and then click Next

  

  or

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• for the upgrade to windows 10

  would be all my files and programs be fixed and I could open with windows 10 (mainly for programs I ask)?

  The upgrade to Windows 7 or later will preserve my personal files, applications, and settings?

  Yes, the upgrade to Windows 7 or a later version will keep your files staff, settings, and applications.

  Backing up your computer:
  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  Also check:

  How to: build 10 tips before installing the latest version of Windows 10

  How to: 10 things to do if the Windows 10 install fails.

  Once you have installed these important updates and followed the required steps, you should be ready to receive your free Windows 10 update this summer.

• The upgrade to Windows 7 Professional Windows and not Windows 8?

  I have Windows 7 on my computer. I bought an upgrade to Windows 7 Professional last year. When I try to update I get sent to Windows 8 upgrade. How can I get Windows 7 to Windows 7 Professional without buying an upgrade of Windows 8?

  Is the Professional Windows 7, upgrade or an Express upgrade?

  The first thing you need to do is to get your key to Windows 7 Professional upgrade Express:
   
  An e-mail containing your product key will be sent to the e-mail address associated with your Windows Live ID account or e-mail address you provided if you ignored the account configuration. Note: If you use an email tool or spam blocker spam filter, be sure that you can receive e-mail messages from microsoft.com.
   
  What happens if I lose my product key?
   
  If you lose your product key, you can return to

  www.Windows7.com/GetKey and sign in using the "Sign In" link in the upper right of the page. This will allow to recover your product key if you have established your account with your Windows Live ID. If you do not configure a Windows Live ID account initially there is no record of your online product key. Check your e-mail since it is the only trace of your product key.
   
   
   
  or

  Here are four utilities, which can display your product keys if they are still there:
  Belarc Advisor: http://www.belarc.com/free_download.html
  (He did a good job of providing a wealth of information.)
   
  Also: http://www.magicaljellybean.com/keyfinder.shtml
  and: http://www.nirsoft.net/utils/product_cd_key_viewer.html
  and RockXP: http://www.majorgeeks.com/download4138.html which has additional features.
   
  --------------------
   
  The next thing you need to do is to ensure that your data is backed up:
   
  http://notebooks.com/2010/12/27/how-to-backup-to-an-external-hard-drive/
   http://notebooks.com/2011/02/25/how-to-restore-a-backup-from-an-external-hard-drive-in-Windows-7/
   
  -------------------
   
  The next thing you need to do is to reinstall the base license that you upgraded, Windows 7 Starter Edition or Home Premium.
   
  If your computer is pre-installed with Windows 7:
   
  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.
   
   
   
  -Samsung uses ESC on most of its systems
   
  -HP use F9 on most of its systems
   
  -Fujitsu uses F12 on most of its systems
   
  -Acer use F12 on most of its systems, but often you need to go into BIOS to allow

  -Dell uses F12
   
   
   
  In general, look at the screen during the POST for a tip for what is possible.
   
   
   
  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.
   
   
   
  ------------------------
   
  If it was a store bought retail license:
   
  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7
   
   
   
  --------------------
   
  After you have reinstalled your original license, make sure that it is enabled before doing the upgrade to Windows 7 Professional:
   
  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
   http://support.Microsoft.com/kb/950929/en-us

  ----------------------
   
  Redo the Express Upgrade:
   
  Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.
   
   
   
  ---------------
   
  Go to reactivate the license again.

• Do you need to uninstall MSE before the upgrade to Windows 7?

  I am upgrading to Windows 7 Home Premium from XP, uninstall MSE for the upgrade?

  There is no place in upgrade from Windows XP to Windows 7, so disabling or uninstalling, so be it, you will need to do a custom installation.

  The upgrade to Windows XP?

  Please read these instructions carefully and completely before you begin installing Windows 7: there are important steps that you must follow to upgrade your PC from Windows XP to Windows 7 in order to preserve your files and settings.

  Before you begin, you'll need to backup all your data to an external storage device, and you will need all the installation discs for the programs that you want to keep. Please make sure that you have an external hard drive (see details below).

   

  More detailed instructions are available at windows.microsoft.com/upgrade-windows-xp. Here are the basic steps.

  1. start Windows Upgrade Advisor (windows.microsoft.com/upgradeadvisor) to see if there are known issues that may affect the installation and the question of whether you should install the version of 32 or 64 bit Windows 7.

  2 back up your files and settings on an external hard drive using Windows Easy Transfer (windows.microsoft.com/windows-easy-transfer). If you do not have an external hard drive, you will not be able to use Windows Easy Transfer. Alternatively, you can copy the files you want to keep on a USB stick, CD or DVD.

  3. you will need to manually reinstall your programs, such as Microsoft Office, after I installed Windows 7. Gather the installation for your programs and all partner/license product key discs. You may be able to download programs from the Internet. For example, Windows Live Messenger can be installed from the download.live.com/messenger.

  4. Insert the Windows 7 DVD in your PC. When asked "which type of installation you want. Click on "Custom (advanced)."

  5. when Windows 7 is installed, use Windows Easy Transfer to restore your files and settings.

  If you are not comfortable Windows 7 installation, check with a local retail or the services of the PC company store to see if they offer upgrade services.

  http://www.notebooks.com/2009/10/13/WinXP-to-Win7/

• How can I work around the compatibility test during the upgrade of Windows Vista Edition Home Premium to Windows 7 Home Premium?

  During the upgrade of Windows Vista Edition Family Premium of Windows 7 Home Premium, he stopped at the compatibility check and asked to uninstall McAfee Personal Firewall Plus. I uninstalled McAfee Total Protection, but the problem remains. I contacted the technical support of McAfee and it installed and running a deep cleaning products McAfee removal. But the problem remains. What should I do to work around the compatibility check, so that I can complete the upgrade to Windows 7 Home Premium.

  Go to C:\Program Files

  Remove the McAfee program from there folders

  Restart the installation again.

  Also:

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

• Unable to complete the upgrade of windows windows 8.1 8

  Could not complete the upgrade of windows window 8.1 8. I tried after you install the latest driver updates and clear the Cache of the Store. Error message 'could not update Windows 8.1 OxC1900101 - 0 x 2002007' ideas how to fix? Thank you

  Hello

  First, I would not use the store...

  The installation media is available here, and you will only need to download once...

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  Just run to win 8...

  Disable or uninstall preference any of 3rd party security program...

  Disable any type of automatic backup program that may run...

  If it still doesn't work, try unplugging your internet connection...

  Also... You can remove the content from the C:\Windows\SoftwareDistribution and make a filesystem on disk cleanup before trying again with new media...

• Wizard upgrade said platform not supported on the upgrade of windows 8 on xp pro 32 market sp 3

  Hi all, it drives me crazy.

  A month ago I went to install the upgrade of windows 8 on my current xp pro, at that time, put assistant level said no problem, I downloaded (and paid) the upgrade and then everything went to hell.  I ended up having to clean my original xp install to get the computer back in working order.
  Now, I decided to try again with the update (using the same product key, I tried to install with last month) so I went back to my email, write down the product key and click the link to download it again, but this time he wont even let me try.  As soon as the implementation or the Upgrade Wizard works, I immediately the message that "this platform is not supported" and that's what I get.
  As I said, I'm running a clean version of Windows XP Pro 32 with SP 3.  Any advice would be most appreciated.  Thank you very much.

  I just checked the BIOS settings and the XD card was already activated.

  The first time I started the upgrade wizard, which told me that I could indeed be upgraded, then I downloaded the upgrade and installed it.  I had some problems with the download, but nothing that was not easy to fix (I honestly don't remember exactly what the problem was).  Once the installation was apparent complete, I rebooted the computer when you are prompted and I got an error message that the installation has failed and then told me that the computer would come back on my original os.  After a few moments, I received a message that the computer failed to return to the operating system, and the computer restarted and gave me the option to boot windows 8 or windows xp.  I have tried both and neither is feasible.  After trying both, I got a new screen that says my computer need of repair.  I then re installed xp, clean boot from the floppy disk to return back at the beginning and have a computer working again. After all that, I reinstalled all the necessary updates and realized when I tried the original installation, I did turn sp2, but not sp 3 so this time I made sure to get that taken care of first.  And now, well you know where I am now!
  Thank you
  INVI.