Flash CS4 extremely slow on Windows 7 64-bit. NOT a question of Kaspersky!

Similar Questions

• Flash CS4 works only with Windows 7 64-bit and Kaspersky Internet Security

  I have a new computer to core i5 Windows 7 64 bit retail. With Kaspersky Internet Security 2010 installed Flash CS4 answers so that it is completely unusable. Uninstall KIS and it works quite well. I already read on another forum that someone of another encounter the same problem with the same combination of products. Does anyone else have this problem amd If Yes, how do you solve? I posted on the forum of Kaspersky without solution so far.

  Norton works OK with Windows 7 (64) and CS4?

  Your chance.  After a week of research I found someone who has thought about it.  Apparently his self-defense of Kaspersky which is causing the problem.  Under options disable control external sevice disable.  For me, that did the trick.  If it does not for you also try to disable self-defense under both options.  Once I did it was moving smooth again.

• I can't install Adobe Flash Player.  I have windows 7 64 bit and firefox browser.  During installation, that I get a message "lost connection", followed by "trying to reconnect", then cannot connect

  I can't install Adobe Flash Player. I have windows 7 64 bit and firefox browser. During installation, that I get a message "lost connection", followed by "trying to reconnect", then cannot connect

  Please use the Offline Installer

  Internet Explorer:

  http://fpdownload.Macromedia.com/pub/flashplayer/latest/Help/Install_flash_player_ax.exe

  Firefox and other NPAPI browsers:

  http://fpdownload.Macromedia.com/pub/flashplayer/latest/Help/install_flash_player.exe

• LR6.7 buggy / extremely slow on Windows 10 (1607 Version for x 64 - KB3176936 systems)

  I updated Lightroom version 6.6.1 version 6.7 running on a laptop running Windows 10 (update of the anniversary). The first thing I tried was to create a panorama of 3 raw images. This operation was a success but it then became virtually impossible to change the image created due to performance extremely slow. The problems I encountered were reminiscent of those I experienced with the initial 6.6 upgrade. (i.e. before 6.6.1).

  I have finally returned to version 6.6.1 with performance return to normal. Here's the info system (for 6.6.1) just in case where this assistance.

  I wonder when I can expect a maintenance release to fix this.

  -David

  Version of Lightroom: 6.6.1 [1083169]

  License: Perpetual

  Operating system: Windows 10

  Version: 10.0

  Application architecture: x 64

  System architecture: x 64

  Number of logical CPUs: 4

  Speed of the processor: 1.7 GHz

  Built-in memory: 8077,7 MB

  Real memory for Lightroom: 8077,7 MB

  Real memory used by Lightroom: 307.1 MB (3.8%)

  Virtual memory used by Lightroom: 263,0 MB

  Memory cache size: 80.8 MB

  Maximum thread count used by Camera Raw: 4

  Camera Raw SIMD optimization: SSE2, AVX

  System DPI setting: 96 DPI

  Composition of the Bureau enabled: Yes

  Exhibition: 1) 1366 x 768, 2) 1366 x 768

  Entry types: Multitouch: no, built-in touch: No, built-in pen: no, touch external: No, external pen: no keyboard: No.

  Graphic processor News:

  GPU Intel(r) HD 4000

  Check the supported OpenGL: past

  Vendor: Intel

  Version: 3.3.0 - Build 10.18.10.4358

  Renderer: Intel(r) HD Graphics 4000

  LanguageVersion: 3.30 - Build 10.18.10.4358

  Plugins installed:

  (1) home canon Plugin

  (2) Facebook

  (3) Flickr

  (4) attachment Plugin Leica

  (5) attachment Plugin Nikon

  Config.LUA flags: None

  Map #1: Vendor: 8086

  Feature: 166

  Subsystem: 124d 1043

  Review: 9

  Video memory: 32

  Map #2: Seller: 1414

  Device: 8 c

  Subsystem: 0

  Revision: 0

  Video memory: 0

  AudioDeviceIOBlockSize: 1024

  AudioDeviceName: SAMSUNG (Intel (r) display Audio)

  AudioDeviceNumberOfChannels: 2

  AudioDeviceSampleRate: 44100

  Build: LR5x102

  Direct2DEnabled: false

  GL_ACCUM_ALPHA_BITS: 16

  GL_ACCUM_BLUE_BITS: 16

  GL_ACCUM_GREEN_BITS: 16

  GL_ACCUM_RED_BITS: 16

  GL_ALPHA_BITS: 8

  GL_BLUE_BITS: 8

  GL_DEPTH_BITS: 24

  GL_GREEN_BITS: 8

  GL_MAX_3D_TEXTURE_SIZE: 2048

  GL_MAX_TEXTURE_SIZE: 16384

  GL_MAX_TEXTURE_UNITS: 8

  GL_MAX_VIEWPORT_DIMS: 16384,16384

  GL_RED_BITS: 8

  GL_RENDERER: Intel(r) HD Graphics 4000

  GL_SHADING_LANGUAGE_VERSION: 4.00 - Build 10.18.10.4358

  GL_STENCIL_BITS: 8

  GL_VENDOR: Intel

  GL_VERSION: 4.0.0 - Build 10.18.10.4358

  GPUDeviceEnabled: false

  OGLEnabled: true

  GL_EXTENSIONS: GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_blend_color GL_EXT_abgr GL_EXT_texture3D GL_EXT_clip_volume_hint GL_EXT_compiled_vertex_array GL_SGIS_texture_edge_clamp GL_SGIS_generate_mipmap GL_EXT_draw_range_elements GL_SGIS_texture_lod GL_EXT_rescale_normal GL_EXT_packed_pixels GL_EXT_texture_edge_clamp GL_EXT_separate_specular_color GL_ARB_multitexture GL_ARB_map_buffer_alignment GL_ARB_conservative_depth GL_EXT_ texture_env_combine GL_EXT_bgra GL_EXT_blend_func_separate GL_EXT_secondary_color GL_EXT_fog_coord GL_EXT_texture_env_add GL_ARB_texture_cube_map GL_ARB_transpose_matrix GL_ARB_internalformat_query GL_ARB_internalformat_query2 GL_ARB_texture_env_add GL_IBM_texture_mirrored_repeat GL_EXT_multi_draw_arrays GL_SUN_multi_draw_arrays GL_NV_blend_square GL_ARB_texture_compression GL_3DFX_texture_compression_FXT1 GL_EXT_texture_filter_anisotropic GL_ ARB_texture_border_clamp GL_ARB_point_parameters GL_ARB_texture_env_combine GL_ARB_texture_env_dot3 GL_ARB_texture_env_crossbar GL_EXT_texture_compression_s3tc GL_ARB_shadow GL_ARB_window_pos GL_EXT_shadow_funcs GL_EXT_stencil_wrap GL_EXT_texture_rectangle GL_EXT_stencil_two_side GL_ATI_separate_stencil GL_ARB_vertex_buffer_object GL_EXT_texture_lod_bias GL_ARB_occlusion_query GL_ARB_ GL_ARB_fragment_program GL_ARB_vertex_program fragment_shader GL_ARB_shader_objects GL_ARB_shading_language_100 GL_ARB_texture_non_power_of_two GL_ARB_vertex_shader GL_NV_texgen_reflection GL_ARB_point_sprite GL_ARB_fragment_program_shadow GL_EXT_blend_equation_separate GL_ARB_depth_texture GL_ARB_texture_rectangle GL_ARB_draw_buffers GL_ARB_color_buffer_float GL_ARB_half_float_pixel GL_ARB_texture_float GL_ARB_pixel_buffer_object GL_ARB_draw_instanced GL_ GL_EXT_framebuffer_object ARB_half_float_vertex GL_ARB_occlusion_query2 GL_EXT_draw_buffers2 GL_WIN_swap_hint GL_EXT_texture_sRGB GL_ARB_multisample GL_EXT_packed_float GL_EXT_texture_shared_exponent GL_ARB_texture_rg GL_ARB_texture_compression_rgtc GL_NV_conditional_render GL_ARB_texture_swizzle GL_EXT_texture_swizzle GL_ARB_texture_gather GL_ARB_sync GL_ARB_framebuffer_sRGB GL_EXT_packed_depth_stencil GL_ARB_depth_buffer_float GL_EXT_transform_feedback GL_ARB_ transform_feedback2 GL_ARB_draw_indirect GL_EXT_framebuffer_blit GL_EXT_framebuffer_multisample GL_ARB_framebuffer_object GL_ARB_framebuffer_no_attachments GL_EXT_texture_array GL_EXT_texture_integer GL_ARB_map_buffer_range GL_ARB_texture_buffer_range GL_EXT_texture_buffer GL_EXT_texture_snorm GL_ARB_blend_func_extended GL_INTEL_performance_queries GL_INTEL_performance_query GL_ARB_copy_buffer GL_ARB_sampler_objects GL_NV_primitive_restart GL_ARB_seamless_cube_map GL_ ARB_uniform_buffer_object GL_ARB_depth_clamp GL_ARB_vertex_array_bgra GL_ARB_shader_bit_encoding GL_ARB_draw_buffers_blend GL_ARB_geometry_shader4 GL_EXT_geometry_shader4 GL_ARB_texture_query_lod GL_ARB_explicit_attrib_location GL_ARB_draw_elements_base_vertex GL_ARB_instanced_arrays GL_ARB_base_instance GL_ARB_fragment_coord_conventions GL_EXT_gpu_program_parameters GL_ARB_texture_buffer_object_rgb32 GL_ARB_compatibility GL_ARB_texture_rgb10_a2ui GL_ ARB_texture_multisample GL_ARB_vertex_type_2_10_10_10_rev GL_ARB_timer_query GL_ARB_tessellation_shader GL_ARB_vertex_array_object GL_ARB_provoking_vertex GL_ARB_sample_shading GL_ARB_texture_cube_map_array GL_EXT_gpu_shader4 GL_ARB_gpu_shader5 GL_ARB_gpu_shader_fp64 GL_ARB_shader_subroutine GL_ARB_transform_feedback3 GL_ARB_get_program_binary GL_ARB_separate_shader_objects GL_ARB_shader_precision GL_ARB_vertex_attrib_64bit GL_ ARB_viewport_array GL_ARB_transform_feedback_instanced GL_ARB_compressed_texture_pixel_storage GL_ARB_shader_atomic_counters GL_ARB_shading_language_packing GL_ARB_shading_language_420pack GL_ARB_texture_storage GL_EXT_texture_storage GL_ARB_vertex_attrib_binding GL_ARB_multi_draw_indirect GL_ARB_program_interface_query GL_ARB_texture_storage_multisample GL_ARB_buffer_storage GL_ARB_debug_output GL_KHR_debug GL_ARB_arrays_of_arrays GL_INTEL_map_texture GL_ARB_texture_ compression_bptc GL_ARB_ES2_compatibility GL_ARB_ES3_compatibility GL_ARB_robustness GL_EXT_texture_sRGB_decode GL_KHR_blend_equation_advanced GL_EXT_shader_integer_mix GL_ARB_stencil_texturing

  Have you disabled GPU treatment?

  I noticed from 6.6.1 to 6.7, in my case anyway, I had the GPU disabled in order to speed up the system. And in your case the HD4000 Intel isn't a particularly fast GPU and has ~ 100 MB of vRAM dedicated.

• My laptop is very slow with windows 7 64 bit

  I install windows 7 64 bit on my dell xps m1530 4 GB of ram, but it seems that windows 7 use my ram too and my phone did become much slower than vista. Is there something wrong with my hardware or drivers? Hope someone can help me solve this problem. Thank you very much.

  Hi vinhnqls,

  I suggest to access the link below and follow the steps described in the article in order to optimize your computer for better performance. The article is intended for Windows Vista, but it remains valid for Windows 7 as well.

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance#section_3

  Let us know for any further assistance.

  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Lightroom after a few minutes of extremely slow. Also the cursor does not respond correctly

  Since a few days I can hardly use Lightroom more. A few minutes after you start Lightroom, it becomes extremely slow. The cursor will also each where I don't want that. If I'm looking for a photo it stops on any other photography. When I close Lightroom I and start it again I can use it for 3 or 4 minutes without problems, but it starts again. If I open it in Adobe Photoshop Lightroom Photographers I have no problem. It is fair to Lightroom. I hope someone can help me.

  What tasks you perform in these "minutes"?

  Specifically, you do a lot of brushing or healing spot?

• Flash Pro CS6, installation of Windows 7 64 bit PC installation hangs

  New download of Flash Pro CS6, initially tried to install on a PC running Windows 7 64 bit. Installation got stuck and does not respond to the step "Installation AdobeHelp" (about 30% in the installation.

  I then tried to install it on a PC running Windows XP 32-bit, and it's exactly the same thing.

  I am unable to go further - someone at - it advice?

  When your system crashes, open your task manager > process and close with adobe.  installation should go ahead.

• Slow connection Windows 7 64 bit

  In the last two days, my wireless Internet has declined to a paralyzing kbit/s from 1 to 10. I have absolutely no idea why this has happened. Before that there is no change to my network.

  I'm running on a router Linksys WRT54G, Windows 7 64-bit.

  First shut down the PC, and then disconnect the pwr to the router/modem, wait five, pwr the modem/router switch on, wait 5, and then start the PC, and the pc once charged completely re - test

• Windows Vista 64 bit not Shutting Down

  I have Windows Vista 64-bit and after a few recent updates it will not shut correctly. The screen saying shutting down just y rest turns and it never stops. I have to use the power button then go through "Windows is not stopped correctly." Does anyone have a suggestion on what I can do to fix it?

  Well at least you know it's updates.
  But now that you have restored on before the updated Automatic updates of Windows will try to re - install the updates again on the next update of the cycle. This can cause the issue to recur.

  To work around this problem and continue troubleshooting follow these steps:

  (1) to prevent the restart that follows the Blue Screen Of Death, go to the control panel. Select system, select the System Protection, select the Advanced setting. In the startup and recovery section, click the settings button. In the dialogue box uncheck 'automatically restart '.

  This way if the BSOD appears it will remain on the screen until you restart manually (with the power switch) so you can copy all the info.

  2) go to the control panel and select Windows updates, then settings. In the settings dialog box, select "download updates but let me choose whether to install them. When you click OK and return to the precedding box select "Check for updates".

  (3) then make a list of the updates download. Download the General description and the number of K.
  You will be able to select the ones you want to install. Select one and install it. It is necessary to restart even if it doesn't tell you the restart.

  (4) see if afier you is installed the problem returns. If this is not the case back to the updates, and install the following and so on.

  (5) when get you to one that is causing the BSOD a brand notes of everything about the BSOD and updated at the source of the problem and to publish them.

  This is enough to understand the nature of the conflict with the update and fix it.

  If this can be done at least you know what update is the problem, it can be uninstalled in most cases without reverting to a restore point. It can also be marked as 'Hidden', then in the future Windows Update will not download again it and raise the problem of repeat.

  Finally you can win the lottery Windows and after you have reinstalled all the updates from that above a time procedure everthing could be OK. He has been known to occur. One just update downloads may have been corrupted. a second facility will work then.

  Continuation through the fog

• Windows 7 64 bit not found SysMenu.dll

  I get the error message below when working under Windows 7 64-bit.

  "There was a problem starting.

  C:'PROGRA~1/common~1/system/SysMenu.dll ".

  The specified module could not be found. »

  All updates of widows were carried out from July 1, 2014.  Have also run several (in-depth) anti-virus and anti-malware scans (etc.), without resolution.  Please help if possible and thank you for your help.

  Josh

  My computer has recently displayed an error saying not found C:\Program Files\Common Files\System\SysMenu.dll. The cause is that the AVG antivirus program had removed as a perceived virus. Thinking about this perception was wrong, I wrote the file in AVG exceptions box. Then I reset the computer with RSTRUI in the command prompt, a zero before release date when the error message appeared. He fixed it. My personal bat - and exe-files have been reset also, so I had to make the changes of the past few days again. Personal records are supposed to be unchanged by reset, but which does not apply to the program files.

  SR

• Windows 7 64 - bit Macro printing question

  I have problems printing using a macro in an application called iNews (made by AVID) on Windows 7 64 - bit installed on new Dell OptiPlex 9020 s.

  I've simplified the macro to just {Ctrl + P} {enter} and mouse freezes, keyboard does not (only Ctrl + Alt + Delete), without ANY error messages in the event log.  If I press Ctrl + Alt + Del then Esc, I can get out of the macro and the print job actually ends.  I noticed that the print job is in the queue in the queue, but won't be released only when I press Ctrl + Alt + Delete.

  When I completed the steps manually, the computer is not locked and printing works very well. It's only when I use a macro to print.

  Here are the troubleshooting steps I took:

  AVID contacted and they attempted to help, but it's an OS problem.

  The macro works great on Windows 7 32 bit.

  RAN windows updates

  Updated drivers from Dell

  For PCL6 and PS drivers printing and I tried the drivers updated (but the problem occurs on more than one printer, even Microsoft XPS Document Writer).

  Performed a clean boot (same question at a session of boot)

  Similar macro created in Excel works fine.

  Started the spooler, deleted files in c:\windows\system32\spooler\printers and stopped the spooler

  Any suggestions will be greatly appreciated.

  Thank you

  Karen

  Hello Karen,

  Please keep us updated on the status of the issue.

  As you mentioned are printers on a print server, the question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet Forums.
   
  TechNet Forum
  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Thank you

• Windows 7 64 bit MCE Spinning question blue circle

  OS: Windows 7 64 bit on my HTPC.

  MediaBrowser running inside MCE for the Organization and appearance of my HTPC

  We leave the HTPC on 24/7.  If we look at a movie on the HTPC, it works perfectly.  If we close not the film down and leave running, next time we try to watch a movie or do whatever it is we get the blue circle without end ring that turns and continues to turn until we completely stop/restart the computer.  Just out of MCE and MediaBrowser does not help.  A reboot is required.  We have posted this question in the forum of MediaBrowser and they said it's a MCE/Windows problem... Any help would be greatly appreciated!

  Hello

  Thanks for asking!

  When you watch movies in the HTPC (Home Theater PC), the system crashes.

  The problem occurs all using the standard video option or only when you use the tile MediaBrowser?

  Third-party programs may cause the problem.

  To check, I suggest you to put the computer in a clean boot state and check the cause of the issue.

  Clean boot:

  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

  Check out the link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 3 in the article to restore your computer to normal startup.

  Note: If in case, you are connected via a connection wireless, and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check wireless see corresponding section are checked (enabled).

  I hope this helps. If the problem persists, or if you need help with any problem of Windows to the future, let us know and we would be happy to help you.

• Is it normal that H.264 files generated on a computer with Windows 7 64 bit not allow playback on a computer with 32-bit Windows?

  I copied the raw images of a concert shot on a Sony HDR-SR11E (i.e., small domestic video camera) to my computer (Windows 7 64-bit) to a USB key. The files cannot be copied to another computer with Windows XP 32-bit. Is this normal? Is it possible to copy images into another format without losing too much quality so that it reproduces the old computer?

  32 - bit should not make a difference in this case. The computer probably missing a codec or the necessary software to read the file. The camera format is AVCHD, not very exotic, but may be more recent than the media player on the PC. Try to install something like VLC player on it.

• Deliver the opening or the creation of new files in illustrator CS5 windows 7 64 bit, "not responding".

  Problem opening or creating new files in illustrator CS5 windows 7 64 bit, program becomes "Unresponsive" when opening a file.

  I recently tried a trial version of FontExplorer X Pro, and this issue has developed after uninstalling this program.  Any suggestions?

  Look for the plugin third ant in the folder plugin...?

  Check out also in the new user account?

  Post edited by: Manish_1988

• Extremely slow/unnecessary Windows Update after system recovery.

  Hello

  While trying to help a friend with her laptop, I encountered a small problem, which seems quite unique. After searching the ' net and the Knowledge Base, I'm about as clued in as when I started, that is to say not very.

  Machine: Satellite 1800 412 (Danish).

  DID: Restore the system to zero back to XP SP1a (NSP).

  Problem: After a complete system via the original recovery CD restore, Windows Update is running * extremely * slowly, or not at all, once it gets to the point where it scans for updates you need. So far, I've managed to get 1 downloaded an update, a little. As an update is attempted usage of the processor reaches a maximum at 100% and stay there until I abandon and hard restarts, since the machine is now almost useless and lazy point appear frozen.

  Tried to: applied manually different updates downloaded directly from Microsoft, such as Internet Explorer 6 sp1, XP SP2 (DK), various updates and patches for XP downloaded and checked/tried to reinstall the drivers of Toshiba (they are updated). Verify that the systems boots properly with all recognized devices. Check the system clock. Searched the Toshiba KB, searched the Internet, searched the Toshiba support forum. Pulls hair in desperation. I have to have restored the system 4times intant to try different ways of patching the system with updates.

  Special features: It is apparently * only * updated Windows, what causes this problem, and that after the first few, where he updates the Windows Update engine in Internet Explorer. Before that I'm trying to update the machine apparently functioning normally. I can surf, download, install and run programs and what not. (No, I did not visit suspicious websites.) If Windows Update runs automatically in the background / 'in the status bar', the same thing is happening: Machine suddenly becomes useless and stays that way.

  The machine is on a local network behind one bulletproof OpenBSD firewall, no other Windows machines inside, so there is no chance of a quick infection of the network at the origin of the problem.

  Unfortunately: Manually download and apply the patches aren't an option I want to activate the automatic updates before you return the machine back to its owner.

  Hope some of you might have an answer to this one, because I have never known or heard of something similar before.

  Frank.

  Hello

  There may be a possible for your problem. An attempt is an Installation from CD XP Win and New Installation of the tool of Toshiba s. check that the activity of process is that s OK, made a driver update and an update of the Bios on the side download Toshiba. http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  I hope this is a help to your problem.

  By