Flash readers 'double' all video signals

Similar Questions

• Flash Player plays all videos

  Hello!

  After reading this forum and without finding a solution to my problem, I started this topic.

  I'm using Firefox (9.0.1) with latest Flash Player (11.1.102.55) on Windows 7 64 bit. For safety, I use "Microsoft Security Essentials Windows" and the Windows Firewall.

  I did uninstall and install Flash Player with the guide posted on this forum (source: http://forums.adobe.com/message/4041846#4041846).

  But the problem persists: I can't watch videos.

  YouTube or livestream.com isn't a problem, but I can not watch twitch.tv or megavideo.com. Twitch.TV I see a black frame without sound, play/pause button etc... MegaVideo.com just tells me to install Flash Player.

  On the forum I found a solution with disabling hardware acceleration, but it does not save the setting. So I think about a problem with the file/folder rights... but it's just a thought.

  Maybe someone of you can help me. I have this problem on 2 computers and another 2 computers, it works perfectly.

  Greetings from the Germany!

  Marthetabani

  Well...

  Are you ready for something REALLY REALLY REALLY ridicoulos?

  Here we go:

  Today, it is again did a format c:. My first time, I installed all windows updates. Turn it back on. Then I installed IE9. Turn it back on. After that, I installed Flash ActiveX and Plugin. Tested on botch: same question as before.

  I thought: 'what the devil... "But after that, I tried 'create a new user'-'solution '. 2 users: 'test1' no admin account admin 'test2 '. The problem has been resolved for BOTH accounts. Yes, with TWO new accounts, I can watch twitch.tv and own3d.tv. With my old account I can't watch it. I deleted my first admin account, renamed the second and also delete the user account 'test1 '. Problem solved.

  I don't know why it works, and why there is a difference between the admin account 1 and account admin 2, but it works for me.

  Thanks for your help.

• Flash ActionScript 3.0 stop all video clips

  Hello everyone. I was hoping that someone could share some knowledge of AS3 with me

  -Situation I have several frames. Each image contains a movieclip. Each movie clip has audio and a plaintiff bar. Is there a next button to switch between the images in the main timeline and back.

  Question- When you press back or next button, movieclip audio does not stop and it overlaps the next or previous image!

  Desired result- When you click the next or back button, it will stop 'none' movieclip that plays before going to the previous or next frame.

  I think I'll be having a lot of frames (so a lot of clips), coding so individually each back/forward per image for a specific movieclip button is a bit complicated and reveals be buggy at this stage.

  
  

  Question- Is there, and if there is, what is the function to movieclips all stop playing?

  for example

  function next(Event:MouseEvent):void {}

  < stop(); all video clips >

  nextFrame();

  }

  next_btn.addEventlistener (MouseEvent.Click, Next);

  Thank you all! Your insight is most welcome and will be appreciated.

  You can use:

  function stopAllF(mc:*):void {}

  MC. Stop();

  If (mc's MovieClip) {}

  for (var i: int = 0; i<>

  If (MC.getChildAt (i) is the MovieClip) {}

  stopAllF (MovieClip (mc.getChildAt (i)));

  }

  }

  }

  }

  but I would recommend that you use the removedfromstage for flvplayback components code and leave stopAllF it was like that.

  BTW, if you have a small number of movieclips to stop on an image, and they have no child movieclips that need to be stopped, the same code removedfromstage works for them too.

  and again, please check the answers useful/correct.

• Windows 7 64 bit computer crashes when loading flash games or during video playback, forcing a manual reboot.

  My computer freezes completely at random times while playing the flash games or watching videos. In this case the mouse and keyboard stop working. If this happens during the video with sound, it makes a noise very loud signal blocked by speakers that continues until I restart the computer. The only way to recover is to manually restart the computer with the reset button.

  I tested different browsers to see if that was the problem, but it will happen in 3 I - IE, FF and Chrome.

  I allows Windows to update itself at will and he has recently updated the video drivers and the wireless mouse and keyboard drivers, but this problem has occurred before and after these updates. There is an update that is still not well, and is an update of Java. I don't know how to fix it or if it even is related.

  I checked the Windows error logs and Windows saves any errors before the Frost, so not obvious (to me) clues it. I tried searching for answers to my question, but forgive me, in this forum the language a bit above my head (Tip: simple answers, please).

  Hello

  Do you have an error message after the failure of the update of Java?

  Try the following steps:

  Step 1: Update the drivers for your chipset.

  Also uninstall and reinstall the display adapter drivers.

  Follow these steps:
  a. open the Manager of devices by clicking the Start button, click Control Panel, click System and security, and then, under system, clicking Device Manager. If you are
  you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  b. in the list of hardware categories, click on graphics cards and then double-click the device name.
  c. click on the driver tab and click on uninstall, and then follow the instructions. If you are prompted for an administrator password or a confirmation, type the password or provide
  confirmation.
  d. restart the computer.

  Refer to this link for help:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Step 2: Put the computer in a clean boot state.

  Perform a clean boot on your computer to verify if a third-party program or service is the cause of the problem. With the help of the boot, we can isolate the program and disable it.

  Refer to this article for more information:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Steps to perform a clean boot:
  a. click the ORB start on your desktop
  b. type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  c. in the general tab, click Selective startup.
  d. under Selective startup, clear the check box load startup items.
  e. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
  f. click OK.
  g. When prompted, click on restart.

  NOTE: Please check that you start your computer in normal mode when you are finished troubleshooting. Followstep 7 of the article mentioned above.

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Mac Mini, end of 2012, down from video signal

  2012 (end) Mac Mini, model A1347, i7 to 2.3 GHz

  OCW mercury Electra 6 G 120 GB SSD

  Factory 1 TB HD

  16 GB of Ram

  S232 Acer

  OS: 10.11.5

  Question:

  Video signal is de-energized.

  Hi all

  I use this machine to run Logic Pro X. I tried a few monitors and different cables, but the result is the same.

  the video signal sporadically goes out. The only way I can get it is back to turn off the Mini for a hour or stick it in the fridge for 5 minutes. It doesn't seem to be dependent on the temperature, since it happens a lot less in the months more cold however showed the journal to monitor temperature as low as 73 C time and he fell again the thermal signal can therefore not the question.

  The fan seems to work and I tried to change the memory to return with noticed no difference. I recently replaced the OCW SSD due to premature failure and spin a new installation of El Capitan on a new drive. I eliminated the monitor and cable as a culprit, so I think that I am dealing with an internal failure. The machine is not under warranty.

  I read a lot of posts on mini Mac in thermal shutdown models particularly image, mine has not overheated or goes out, he simply loses its video signal. Fans and ports are clean and free of dust.

  Everyone knows about this problem?

  Install a fan speed and temperature app to help you determine if it is really related monitoring temp.

  I use this

  http://www.CrystalIDEA.com/Macs-fan-control

  I suspect a hardware problem. The graphics unit in the Mac Mini 2012 is integrated into the CPU chip

• I can't do the video signal from the laptop to the TV, last night I could

  Today, I can not video signal on my tv via hdmi. last night I was able. usually when I unplug the HDMI - the computer makes a sound, now no sound.  thinking about what I did.  java updated, could have an update to adobe

  Today, I can not video signal on my tv via hdmi. last night I was able. usually when I unplug the HDMI - the computer makes a sound, now no sound.  thinking about what I did.  java updated, could have an update to adobe

  What happens when you type + P (e.g. Projector Options)? If you are unable to access the projector Options ( Start, accessories, connect to a projector), you may need to update your video driver. It is possible to distance an Adobe Flash update has made the existing one obsolete but barely.

• Is it safe to buy SanDisk Ultra adapt USB 3.0 flash drive in all sizes for their part start?

  Hello

  I just read your incompatible experiences regarding the ability to boot from different readers of Sandsisk.

  To be more precise, is it safe to buy the discs above (North American model numbers):

  SDCZ43 - 016G - A46 - 16 GB

  SDCZ43 - 032G - A46 - 32 GB

  SDCZ43 - 064G - A46 - 64 GB

  SDCZ43 - 128G - A46 - 128 GB

  at the start of one of them.

  Under Windowss, you can use FAT, FAT32 for sizes 32GB or less, NTFS for 64 GB or more. Ok.

  I've always wondered how to do a 64GB or more large disk bootable under Linux or Mac OS X?

  Thanks for your clarification!

  SanDisk did not burst as the hard drives over the years.  Is there the sellers offering some of the old stock, no doubt.  There sellers of counterfeit discs, certainly.  Are there readers used sellers, certainly. Are there vendors selling readers and not allowing them to return if the buyer is unhappy, certainly.

  So, rather than worry about the model numbers, worry to buy from a reliable source, so if you have a problem you can return. Quickly & easily.  New SanDisk flash drives are all seen as removable Windows.   And Easy2Boot will make them bootable., even on the new UEFI systems, which should be more a problem starting model guarantees.

• Can not turn on the same monitor if connected to the TV displays error no video signal".

  Original title: barely tv cell

  have on my computer and the screen does not light. He lit up a bit but not on. I have connected my laptop to my tv via the vga cable. Start the computer screen turns off after startup. Start in safe mode, it works. Restart n normal mode turns off screen. TV said no video signal. What causes this?

  Hello

  Try the steps mentioned below and check if they help to resolve the issue.

  Method 1:

  Use the option ' enable video low resolution (640 × 480) ' start and then update your video card driver

  (a) click the Start button, click the arrow next to Shut Down and then click on restart.

  (b) do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  (c) on the Advanced Boot Options screen, use the arrow keys to select activate video low resolution (640 × 480) and press ENTER.

  (d) log in your computer with a user account with administrator rights.

  (e) If you can see your desktop, there is a problem with your video card. Try to update your video card driver. For more information, see update a hardware driver that is not working properly.

  If these steps resolve the issue, you are finished. If this is not the case, go to the next set of steps.

  Method 2:

  Start the computer in safe mode and disable your video card

  (a) click the Start button, click the arrow next to Shut Down and then click on restart.

  (b) do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  (c) on the Advanced Boot Options screen, use the arrow keys to select Safe mode, and then press ENTER.

  (d) log in your computer with a user account with administrator rights. When your computer is in safe mode, you will see marked Safe Mode in the corners of your screen.

  (e) open Manager devices by clicking the Start button, click Control Panel, click System and security, and then, under system, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (f) in the list of categories of equipment, expand the category of display cards. Take note of your graphics card.

  (g) with the right button of your graphics card and then click on disable. Confirmation prompt, click Yes.

  (h) close all open windows and restart your computer normally.

  (i) when your computer restarts, if you can see your desktop, there is a problem with your video card. Try to update your video card driver. For more information, see update a hardware driver that is not working properly.

• Monitor video Signal loss

  I'm having a problem with my XPS 8500 and hope you guys can help out me.  I would like to know if my problem could be linked to the assumption of the supply of power, or if not, if you have other ideas.  I am currently waiting for Dell to call me after basically insulting me and claiming my cable DVI is not connected correctly.  I have replaced the cable and am still having the same problem:

  My 8500 XPS came with the AMD Radeon HD 7870.  I had the computer for a month and have experienced a problem about 7 times now, the latest being this morning.  My monitor (new Dell 24 ") will randomly lose the video signal.  Most of the time it's the morning after the computer remained all night and the monitor in power saving mode, or when I get home from work.  The system won't mode 'sleep' because I have that turned off so that I can remote access to my computer if necessary.  I also manually told the monitor from the DVI source to make sure that the automatic selection of the source is not the issue.

  What's weird (Besides he won't), it's that when I move the mouse or hit the keyboard the screen out of power save mode and acts that it will Brig up to my office.  But he's sitting there for a few seconds and then between new power saving mode. Even more strange because the carillon of PC indicating that it recognizes the monitor is connected again.  That tells me that the computer is not fixed because it sounds too when I disconnect and reconnect the cable from the DVI monitor and the monitor power cable.  I'm no expert, but it seems that my computer itself works (not crashed or frozen), the monitor also works, but the computer does not send for some reason any of the video transmission to the monitor.

  It does not it whenever it's on and the monitor is in power saving for a long time, but happened about 7 times in the last month and it is very annoying because I have to do a hard reboot to get back on my computer.  He even did once while I was in the Middle using the computer.

  I have a feeling that Dell will make me jump through hoops a lot before admitting or sugessting a bad video card.  Am I crazy to think that is the question?  Reading the forum made me think that it is not a question of power because my computer is not freezing or do whatever it is already asspciated with a power supply issue.

  I appreciate any ideas.

  UPDATE: Eu new map video for a week or two and have not experienced the problem again.  I hope it's resolved.

• When the file is exported to SWF format, it will play all video files that are assigned to the keys

  I created a Flash project, in which I have buttons that play different music videos (by jumping to an image not loading the film when the button is clicked)

  Basically when I export the file as a SWF file to a place, which is different from where all videos are stored only 1 of 6 videos will play, however they all works when I export to the same file, but if I move it, it will play only 1 video again.

  So I want that all my video files to play when I move my swf in different places.

  I'll upload some screenshots, if you have any questions do not hesitate to ask. Thank you

  Page, libraries, timelines

  

  Code

  

  All files will play only when it is in this folder

  

  Help...

  It was something really simple I am downloading the videos in a weird format but I converterted to standard FLV and it was very good

• Video signal splitter unrecognized DVI - two different devices! Why?

  Looking for answers - replaced a motorized DVI splitter that has worked well for over a year - using HDMI > DVI

  adapter to connect Mac Mini i7 2012, OSX 10.8.5, HDMI port, to the Aluratek DVI splitter.  Configuration below - worked fine for about 2 weeks.  Then came after a few days of inactivity - computer but the display mode 'sleep'... would not wake up. removed the splitter and connected live - monitor (s) work well.   This same issue is why I replaced a divisor of model "TrippLite" - impeccable/no questions for 12 months, and more with this one.    The separator indicates its getting the video signal from the Mac... and video shows displays connected... but see monitors/don't receive it no signal.  I tried to lower the display resolution - no impact.  Have reset NVRAM, SMC several times... reconnected, the range cable several times... tired MiniDisplay Port Adapter > DVI... no luck.  ANY IDEAS MUCH APPRECIATED!  It's in a studio where I need to have dual - in a second workspace - splitter necessary because the distance to the extreme-monitor is too long for a splitter - liabilities

  Technical support said mfgr this Mini graphics card can possibly work for "a while" then stop recognizing the defendant of... How do I?  If we read a single monitor, directly - connected is too much coincidence for a second separator developed the same problem as the other we had - I don't know if there is some thing in the Acer monitor settings that would have an impact on anything whatsoever but I doubt - this new separator 'fixed' the old man a problem after it was connected - and now signal is not recognized through it after a few weeks.

  

  If you have a multimeter, check voltage on his block of POWER & with 2 will check for a ground loop...

  https://en.Wikipedia.org/wiki/Ground_loop _ (electricity)

• Had to give up using Firefox due to the fault of all videos

  No video will not play. Not any Youtube or those of KimKomando or other sources. Tried to replace Adobe Flash as well as clear cache etc. - even replace Firefox to previous levels. Nothing helps. Firefox has been my mainstay years so I'm sad that I have to use other browsers ' less - than. "

  There are some compatibility issues between the last Flash drive and a few Add-ons Firefox or settings. Could see you if anything in this article helps you: 11.3 Flash does not load video in Firefox.

  You can also consider turning off new protected in Flash 11.3 mode, since this feature is currently being debugged. See this article from Adobe support under the heading of 'Last resort': Adobe Forums: how to fix protected Flash Player for Firefox mode?

• Can I get a video signal or Tv into my laptop to burn to DVD?

  I want to know if I can save out of our skies more box in my laptop and burn them on DVD.

  Hello

  As much as I know Satellite phones do not have video IN port and you can't watch TV without an external hardware. I tested it with my laptop Portege. I used an external video converter.

  This way you have video signal to your unit. You can save it (using the software supplied with the converter) and later to create a video DVD.

  Unknown another possibility for me.

  Good bye

• HP 15-g020dx: green screen on almost all videos

  Hello. I saw this question in several places and tried their suggested corrections. Some of them have temporarily fixed this problem, but it keeps recurring. Is there a definitive solution to this? Thank you.

  This problem seems to be fixed after you download Goodle Chrome. All videos play fine using Chrome and Internet Explorer after you install Chrome. If someone experiences this problem with 8.1 I would recommend Chrome to give it a go.

• MT MONITOR (TV) SECONDARY DISPLAYS UNSUPPORTED VIDEO SIGNAL

  I used a VGA splitter to connect my Toshiba Regza LCD TV and my screen for multiple monitors. I have the NVIDEA planned program to Clone. If I start the computer, the two appear when windows XP starts, but once the icons on my desktop, the TV shows unsupported VIDEO SIGNAL

  No, it won't work like that.  You can not use a video splitter, each monitor must be connected to its own output on the video card.