FlexUnit support remote control run?

Similar Questions

• Satellite A300 - 15J PSAJ4E support remote control

  Hey,.

  A300-15J does support remote control?
  There is a special pocket for her in my toshi, but instead of the remote control, there is an immitation.

  If Yes, where can I buy it?

  Say the user manual?
  Haven't you read?
  There are details that you can use a remote control?

• Satellite X 200-20s: remote control no information and no operation.

  It is a reasonable laptop if you do not mix the software, if you buy and install norton 2008 and Office 2007.

  Thought I would try a DVD on this point, on-screen controls works very well.

  Tried the remote control.nothing (RC6),
  Tried R/c in some programs to a DVD standard, no, I / R functions at all. OK lights up.

  Any idea on where to find all the information about the remote control anywhere on this earth?

  Toshiba seems to miss this out my booklets of instructions completely.

  Or is there a hidden place?

  Boyfriend sorry but I don't understand why you weren't able to find page 9 in s manuals for Satellite X 200. You can find a few sentences very important:

  + This computer is equipped with a remote control, which allows you to control * some * of your computers to outermost. +

  + * IMPORTANT *: +.
  + Remote is specifically designed for this computer. +
  + Some application programs * can not * support remote control function. +

• Support of remote control options to view 4 desktops

  Can someone suggest a support remotely appropriate office application?

  We use currently NetOp v9.2.2 remotely control our physical computers for the management of the end user. It allows several customers view and control a single host for collaboration, etc. Runs as a service and is fast.

  However, it doesn't play well with desktop view mode RDP. Works very well in mode of PCoIP but conflicted with RDP.

  DameWare is my next choice, but their customer service is a show-stopper. Any other suggestions?

  Any help is appreciated.

  Thank you

  Ken

  We had this same problem and I can't say that we have resolved yet. We use LANDesk here on campus, so it would have been nice to use his ability to remote control integrated as we do for our physical machines.  Unfortunately, the landesk agent and pools of related clones don't play well together.

  I have not yet tested, but I looked at using WebEx Support remotely:

  http://www.WebEx.com/product-overview/Support-Center/remote-support.html

  There was a conversation at VMWorld in the fall that remote assistance could be a new feature in a future version of view - but it doesn't look like to me he was coming very soon.

  Jeff

• Fingerprints and the remote control supported on Satellite P100-387

  P100-387 has a fingerprint and the remote? Please, someone answer me.
  Thank you.

  Hello

  To my knowledge, the Satellite P100-387 does not support the fingerprint reader and is not supplied with the remote control.
  But you're right.
  The fingerprints and the remote control are optional and some laptops in the P100 series support fingerprint reader and are delivered with command remotely.

  I also found this site with P100-387 material specifications:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?service=EU&PRODUCT_ID=120514#0

• If script running locally-make, if the remote control-do that

  Hi all

  need some advice on the best way to do it, don't know if it takes even a logic like that, I can be more thinking than he.

  Firstly a bit of background:

  I have a site clipbucket 2.6.  works very well on the remote control.  When I install with xampp on my personal computer errors being lifted from

  Call to undefined method ADODB_mysql::select()

  now, I found a fix for this on their site, it is to change a line in the code:

  need to 'adodb/adodb.inc.php ';

  something that will make reference to the file correctly in a local environment.  Some people suggest

  require ' / FULL PATH TO/adodb/adodb.inc.php ";

  but this does not work for me, I get an error of not being able to find the file, it turns out that this works only on wamp or XAMPP, I use xampp

  This is what works on my test server local xampp:

  need to 'C:\xampp\htdocs\videoz\includes\adodb\adodb.inc.php ';

  NOW MY QUESTION:

  need to 'C:\xampp\htdocs\videoz\includes\adodb\adodb.inc.php ';

  will not work on the remote control to reference the file correctly.

  How can I make a logic to decide if a script is running on local or remote and include a filepath as a result?

  If the file exist?

  the root of the server?

  suggestions?'

  ideas?

  is it still the right way to go on this subject?  I can't find a way for scructure include working with both, I disabled it to use variables in the include statements (regardless of its name), ha

  any suggestions on how to do this effectively and above all safely?

  Thanks a ton for your attention!

  You can do something like this:

  If ($_SERVER ['SERVER_NAME'] == 'mylittlehost') {}

  to do this

  } else {}

  do this

  }

  .. and Yes, to answer your question, it's a good way to go about it.

  Another way is to have an include with a set of functions, etc., which is for your local site and an inclusion of the same name which contains comparable functions for the remote site, but the day may come when you accidentally download your local version of the remote control, causing the remote site to break.

• Apple TV signals Siri remote control as support when it is disconnected from the charger

  I just finished my Siri to load remote - it was down to about 50%, so I loaded for about 6 hours with my iPhone 6s charger.

  I now have it unplugged from the charger, but the Apple TV still shows the State remotely like loading when it obviously isn't.

  I tried to reset and re-twinning of the remote with Apple TV, but the State has not changed. Is there a way to fix this, or does take some time to update (maybe needs battery to drain a bit with use)?

  I have corrected this now.

  There seems to be two conditions for State of charge reliably updated when you have finished filling and want to disconnect-

  (1) make sure that you are on the Bluetooth - screen remote controls and devices with the battery icon on Apple TV

  (2) make sure that your charger is turned on when you unplug the connector of the remote control lightning

  I found that if the charger is turned off before I log out (which is something I usually do think its safer), the icon is not always up to date.

• Portege M800-PPM81E - installation of remote control problem

  Hello guys,.

  I have a problem to install the remote on this laptop.
  First the winbond CIR driver does not work, I try on different OS... the same message... "There is a problem with this Windows package install."

  A program run as part of the Setup did not finish as expected. Contact your supplier of staff or the package of support ".
  I've now installed Vista x 64... doesn't work.

  Thank you
  M.G.

  Hello

  Remove the old software on the remote control of the system.
  Then, visit the page of European driver of Toshiba and download the drivers and tools.

  On the Toshiba page I found the Remote Control Manager v.2.4.0.1. This driver is required for the remote control work.

• Siri remote control controls the volume but will not turn on or turn off the tv more

  LLA Siri remote control the TV volume, but does not turn the TV on or off more. My anynet + him Cec is enabled. How can I get this function runs again. Tired of using two remotes

  That is dependent on the TV then you will need to contact their support

• Windows Media Center learned remote control cable, cannot recognize the Windows Media Center remote control

  Running Vista Home Premium 64-bit.  I rent a cable box so I can get some programs at the 3-digit level.  When I've set up my Windows Media Center (WMC), WMC learn successfully the cable box remote 1 - channel upward.  My problem is the next step and change the channel using the Windows Media Center remote control or keyboard.  My keyboard or the WMC remote will change the channel.

  I got Windows Media Center to re - learn the cable box remote control twice, which is always successful, but again once, when the time comes to use the Windows Media Center remote control or my keyboard to change the channel, the channel does not change.

  Could someone please help me with this?  Thank you in advance.

  Hey kansascitykid,

  If you receive your TV signal through a set-top box and Media Center is unable to change the channel, or it changes channels incorrectly, check the following:

  ·        The infrared diffuser is connected to your remote control receiver. If the infrared diffuser is not connected, Media Center cannot send a signal to the set-top box to change a channel.

  ·        The infrared diffuser is well positioned at the front of the set - top box. If you are having trouble placing the IR blaster on the set - top box correctly, try to use a flashlight to locate the signal on the set - top box receiver.

  ·        IR control codes are configured correctly. If constantly changing channels, control IR codes may not have been configured correctly during the installation of TV signal. To reconfigure your TV signal, on the Windows Media Center start screen, highlight toTasks, clickSettings, click on TV, then clickSet up the TV Signal.

  • Center cannot send a signal to the set-top box to change a channel.

  More information here: problems with watching TV on your computer

   

  Also have a look if you find useful suggestions in this thread.

   

  Microsoft Media Center remote with pace DC50X 1039, Setup box cannot change channel

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Connect to projector remote control

  I have a laptop Toshiba Satellite L645-S4102, running Windows 7 and an EX5210 EPSON projector.  I am able to connect to the computer with the printer using a USB cable to show a POWER POINT program.  Images of the projector and the sound works fine.  But the the projector remote control does not work.  I have to use the arrow keys on the computer to move to the next slide.  Is there a way to set up my computer to pick up this remote?

  It hurts.

  I don't understand what you mean by "a PowerPoint to JPEG", but I suppose what you mean is that if you have a PowerPoint saved on a USB key and plug this drive to the USB port on the projector, you can control the presentation using the remote control.

  However, if you have a PowerPoint saved on the computer and then connect the computer using a cable between a USB port on the computer and the USB port on the projector, presentation displays via the projector but the remote does not work to move the slides.

  Just to make sure that things work properly if not, unplug the projector from the computer and start the presentation that your friend wants to show.  It should display on the computer screen.  Advancing slides when you click the left button of the mouse?

  When the projector is connected to the computer, have you tried all the other keys of the remote control?  In other words, the arrows (on the remote) move the cursor on the screen?  The Enter key act as a left mouse click?  The key is ESC acts as a right mouse click?

  Note that as work around might be not satisfactory, you can copy the presentation from the computer on the flash drive and use it the way you did in the past.  Or, as you have already done, use the arrow keys on the computer.

  I understand that the the User Guide for your projector says

  If necessary, configure your computer to work with an external USB mouse. See your computer
  documentation for more details.

  but I've never seen any system that requires a special configuration to use an external USB mouse.  All the ones I've seen that work as soon as they are installed.  If your remote control does not work as a wireless mouse, chances are that it never properly installed.

  In addition to the advice 'configure your computer', Epson FAQ on this subject says "make sure that your computer is selected as a source. Press the button of the computer on the remote control to select your computer as source"- but if the computer has not been selected as source, you would not see the screen, it's probably not the answer.

  If any, occurs when you connect the projector to the computer and turn on the projector?  You hear any sound or see a brief message pop up?  Do you remember if you hear or see anything the first time you connected to the projector to the computer?

  With the projector connected and turned on, go to the computer and click Start, type "Device Manager" (without the quotes) in the search box and press ENTER.

  Look through the Device Manager and if any device displays a warning icon, click twice on this device and to report (a) the full name of the device and (b) the full text, presented as "State of the device.

  If there is no warning icons, follow these steps (it's a bit of speculation on my part, because I don't have a projector like yours):

  • Click the triangle to the left of "Human Interface Devices" to expand the category.  Report the full names of each item in this category
  • Click the triangle to the left of "mice and other pointing devices" to expand the category.  Report the full names of each item in this category
  • Click the triangle to the left of "Human Interface Devices" to expand the category.  Report the full names of each item in this category
  • Click on the triangle located to the left of "De Bus USB controllers" to expand the category.  Is there an element with a name similar to "(USB) driver Microsoft mouse and keyboard detection"?
  • Browse through the categories and see if you can find a question relating to your Epson projector.  I don't know which category this might be it's not in the above 3 categories.  If you find it, please report (a) what category it's in, and (b) the full name of the device.

  EDIT TO ADD

  Your computer is connected to the Internet when you plugged the projector to the computer?

  Is your computer connected to the Internet now (or can connect if you want to do)?

  I ask these last two questions because it dawned on me that maybe by "configure your computer," Epson means that you must install the driver for the remote wireless mouse function.  Although it is possible that such a driver is embedded as part of a normal installation of Windows 7, it is more likely that when you plugged the projector to the computer, Windows would tried to access Windows Update to find the right driver.  Describes user guide the CD supplied with the projector as just "documentation projector" Epson must wait until the driver is built either in or is downloaded from Windows Update.  Alternatively, you can download the driver directly from Epson--> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=188471&prodoid=63091522&infoType=Downloads&platform=nodetect

• remote control will not access the letters in media center in Windows 7

  I use Media Center with Windows 7.   When you use the command remotely (RC6) multiple key does not rely on the number buttons should afford letters on access keys, but all I get is multiple insertions of the number.  My old Media Center XP computer worked correctly.  I can access letters OK using my keyboard but that is rather cumbersome to use in the living room and I prefer to get the remote control works properly.

  Hello

  1. have you made changes on the computer before this problem?

  2 is this a desktop or laptop computer?

  Method 1: Select the default program.

   

  a. click the Start button

  b. click default programs

  c. click the "Set Program Access and Computer Defaults" link

  d. Select custom

  e. choose a default media player

  f. Select Windows Media Center

  g. click Ok

   

  Restart the computer.

   

  Check your Windows Media Center button on the remote control

  Method 2:

  Run an analysis of auditor of system files on your computer and check for the issue.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  If the problem persists, please post your question here:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope the above information is helpful.

• Tandberg Edge 95 MXP Password reset via the remote control

  Hello

  I try to reset the IP password via the remote control and still get the complaint that the password must be at least 8 characters and the number. I tried all combinaiton of 8 characters and 1 number, 8 characters and 2 numbers, 6 tanks and 2 numbers, 4 characters and 4 numbers, number 8 characters and 1 number 1 and so on. Is there something special about looking for the system?

  Thanks for the support!

  PS. When I telnet into the system, it shows TANDBERG Codec Release F7.2 PAL / SW Release Date: 2008-10-31, so I guess it is 7.2.

  Do you know if strict password is enabled or not?

  By default, that is, unless you have turned it off at some point, which will ask for a password at least 15 characters that contains 2 lowercase letters, 2 caps, 2 numbers and 2 special characters.  You can check by connecting to the endpoint using SSH or Telnet and runs the API command below:

  xConfiguration StrictPassword

  Here are the steps to reset the password to access IP on a TANDBERG MXP endpoint, I suggest that you try to use the API to change the password by logging on to the endpoint by Telnet or SSH instead of the remote control. The most recent software MXP is F9.3.4, suggest you also improve your point of termination to the latest version to mitigate the security issues with the older software. You can contact TAC and advisory security cisco-sa-20140605-openssl to get a key to unlock so you can upgrade your MXP to software F9 of reference, from there, you can upgrade to F9.3.4.

• Try to get a wireless remote control to work with Flash presentation... Help!

  I know almost nothing about Flash or Powerpoint.  They gave me a Flash presentation that I need I want to show at meetings using my wireless remote control, but I can't seem to move forward and backward between slides (works very well using the arrow keys on the keyboard to laptop - Windows XP Pro).  The remote works fine with Powerpoint presentations, so I don't know the remote is ok.  Is there some setting/order I have to run my Flash presentation with my remote, or do I need a special remote control?  I have already spoken to the remote support (Keyspan/TrippLite) and they were totally unknown wirh Flash and said simply that their device works with Powerpoint, as announced, which was true, but they could not help me with Flash presentations.  There, can someone help me?  Thank you very much!

  Thanks a lot for all the help.  I see a lot of situations where I can use the functions available through the use of SharpKeys2 key mapping, as well as a few other programs I 'discovered' during my travels recent (KeyTweak + AutoHotKey).  Even better for my situation here, I just got a more advanced model Keyspan remote (PR-Pro3) what Flash handles submissions very well - I have no idea why - and nor their tech support, apparently.  Anyway, the PR - EZ1 will come back to Newegg and I'm fortunately wireless practice of my script for my Flash presentation - working remote in hand!  Take care.

• Remote control/software Apple TV with the App Store problems

  Seems ridiculous that a Sept 2016 4th Gen apple TV purchase has the same problems of connectivity with the App store. Impossible to connect, or even choose App store, or spare parts offline, erratic, glitch and acts as a problem of distance, but seems to be a software problem or interface. Obvious corrections or ideas to stabilize or least to increase connectivity to app store with 4th Gen Apple TV/remote control?

  No problem of connectivity with a 4th getting Apple TV remote here... Sorry, you encounter this problem with it.

  See if there is something that will help that you haven't tried in this article to support > set up the Apple TV Remote - Apple supported application