Flight Simulator cannot find DirectX 9 or 10 and does not start

Similar Questions

• After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer

  After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer. Also I can't 'manage' my computer because I do not have "permissions". I tried a fix he 45071 and it did nothing.

  Applications, (Norton and McAfee) (including free evaluation versions are notorious for not not upgrade (or uninstalling) itself.) If NIS has been installed for 3 years, you have NIS update at least once and maybe twice (e.g., NIS 2009 > NIS 2010 > NIS 2011).

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) viaControl Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of NIS 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]

  10. restart once again & test.

  NB: Installation KB971029 disables AutoRun/autoplay on USB connected but not 'brilliant media' external drives (i.e., CDs & DVDs). See http://blogs.technet.com/b/msrc/archive/2011/02/08/deeper-insight-into-the-security-advisory-967940-update.aspx

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Microsoft Flight Simulator 2004 installation with the 4th vista disc does not work. What should I do?

  Microsoft Flight Simulator 2004 installation with the 4th vista disc does not work.  What should I do?

  Hello

  You get no matter what error code or error message?

  There seems to be a problem with the file missing in the rear disc system. I suggest you to refer to the following Microsoft article and check if it helps.

  Flight Simulator 2004: known video issues: http://support.microsoft.com/kb/823628

  If the steps in the Microsoft article mentioned above do not help, then it would be best to ask your question in the Microsoft Game support forum.

  Microsoft Flight Simulator Games Forum: http://www.fsinsider.com/

  Or contact support for Microsoft Flight Simulator game: http://www.microsoft.com/Products/Games/FSInsider/tips/Pages/default.aspx

  Hope the information is useful.

• Facebook, play pogo, I get this message "cannot find the plot of pogo, xd does not.

  This happens when I try to play games pogo on Facebook, "couldn't find the frame of pogo, xd does not.

  OMG, THANK YOU, THANK YOU.

• Error: This page cannot be displayed - the remote device and does not accept the connection. (! found)

  * Original title: this page cannot be display the remote or unit does not accept the connection. (! found)

  My internet connection works very well, I'm trying to access a page of my gate of the school we use to complete missions. I can access my web page of schools, I can access my e-mail from the school, but I can't get the e-portfolio page. It says cannot display this page - the remote device and does not accept the connection - (! found). He said to ensure that the TSL and SSL in the advanced internet options security part turned on who they are, my better protected as well the mode. I've never had a problem accessing this page before. It is only this page! Help!

  Hello Teresa,.

  The probable cause of this problem could be due to wrong settings for internet explore.

  Please see the link below, Windows 8, follow the steps to check the Proxy and DNS settings
  http://support.Microsoft.com/kb/956196/en-us

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Hope this helps, please answer with the results for assistance.

• PlayBook Simulator included in the SDK WebWorks for Mac does not start

  Hi, I downloaded and installed the WebWorks BlackBerry SDK for Tablet OS for Mac from http://us.blackberry.com/developers/tablet/webworks.jsp . I have VMWare Fusion installed 3.1.2. I used the beta3 .iso Installer to create a virtual machine, and it worked very well. Open the bbwp/blackberry-tablet-sdk/BlackBerryPlayBookSimulator-1.0.1/BlackBerryPlayBookSimulator.vmx file load VMWare Fusion and adds a virtual machine named "BlackBerry PlayBook Simulator" in my VM library. When I try to 'turned on' virtual machine, nothing happens. The power seems to be on for two seconds and turns off the virtual machine. I can't find all the lines from log in Console.app. the 'Virtual Machine'-> 'Force Start Up' menu is no help either. I download the stand-alone "BlackBerry PlayBook Simulator for Mac", that is also marked v1.0.1 but I am not optimistic if it is delivered as a set of folders VMware. Please do not make me run the PlayBook Simulator in a virtual Windows XP machine!

  Hi jaschroe,

  Try to manually copy the folder BlackBerryPlayBookSimulator - 1.0.1 to another location on your Mac and then try to open this copy of the VMX file in VMware Fusion. (No need to re - install).

• Satellite Pro 6100: cannot get into the BIOS and does not start

  I have a portable Satellite pro 6100, en I was trying to boot from an external USB hard drive. When I activated the second hard drive option in the BIOS it has stopped booting all in all, I can't even get into the BIOS Setup more. All I get is "In touch with tomorrow TOSHIBA" screen with the icons to select the method of priming preferred manually after it's just blank screen with a cursor blinking in the upper left.

  Press ESC or F8 before to turn usually results in fast beeps sounds.
  Press tilde (~) before turn is reflected in the remaining space screen (not even the home toshiba screen appears) and slow Zens sounds.

  Apart from that I can't really do nothing at all.
  I tried to reset the BIOS by disconnecting the battery CMOS/RTC (hoewever, we call it) of the motherboard for a while with no results.

  Turn on/off without the results of HD internal in a white screen with an ERROR 'IDE #0.
  I can always stop by pressing the power button, you don't have to bother on the external hard drive it past I don't even want it works more.

  Suggestions?

  Hello

  I agree with Graeme. Your HARD drive is probably faulty. Sorry, but I don't think that you will be able to use the external HARD drive. The option in the BIOS is not for EXTERNAL HARD drive is just, I guess, for disk HARD placed in select Bay.

• I have windows Vista Sp2. Cannot get into the BIOS. Computer does not start on the desktop. What can I do?

  Have Windows Vista SP2.  Switch on computer will go not on the desktop.  Tried to get into the BIOS, but get a blank screen.

  Someone at - it ideas. Thank you.

  Have Windows Vista SP2.  Switch on computer will go not on the desktop.  Tried to get into the BIOS, but get a blank screen.

  Someone at - it ideas. Thank you.

  Don't ned to start the Office before accessing the BIOS...

  The following tutorial is about changing the bios boot sequence.
  #1 step is how to get to the BIOS window. THIS show be what you need. You can skip the rest if they do not apply to you.
  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• Dell Vostro 430 sometimes breaks down and does not find the hard drive in the bios

  So I have this old - ish Dell Vostro 430, intel cpu, windows 7 hard disk sata 250 GB, 4 GB of ram.

  Update BIOS to the latest version 2.4.0

  In certain exceptional circumstances, this PC sometimes crashes in windows, it is restarted, and then when he comes back it does not find the hard drive as a gift. He is not seen in the bios and does not start.

  To fix, I have to unplug the power cable, wait a few seconds, plug in, reboot the computer and it starts normally, load windows and everything.

  So far, I have tried to paginate on another hard disk, reinstall the Windows operating system from scratch, and same thing happens from time to time.

  It is difficult to find the cause of the problem, because this happens very rarely.

  Sometimes, when the pc is turned on for the first time in the morning, the hard drive is not found by the bios and we reappear at the same trick (disconnect the power cable) to take him back.

  When it crashes when using inside Windows, it seems that the reason is the computer can't find the hard drive.

  Such computer is out of warranty.

  It would be nice to just throw this computer because it is still fine for the work it has to do, + I have Windows and Office OEM license on it, as well as many other software that I have to reinstall etc.etc.

  No idea what I could troubleshoot?

  Maybe change the motherboard? How can I buy a new motherboard for an out of warranty Dell?

  While possibly keeping all the OEM licenses (Windows 7 and Office 2007).

  Desu

  .. .once in a while...

  That will make hard to resolve this situation.

  • Have you tried to replace the battery in the motherboard, if nothing else than to exclude it? CR2032, 3-volt lithium-ion, ~ $2 at discount stores. Do not forget to open the BIOS Setup and copy down all current settings first because remove battery BIOS resets the default values, which is maybe not correct for your specific system.
  • Have you tried another SATA data cable, or reinstall the existing at both ends?
  • Have you reinstall RAM and PCI card in their slots?
  • Have you used canned air to blow out the dust?
  • Maybe a power supply problem... ? If insufficient voltage, he could not start the HARD drive quite fast at startup, or quick enough after your option settings to be able to turn the HARD drive off when it is not accessed, what may cause this error message 'not found '.
  • If you use a power strip or surge protector, have you deleted and the PC connected directly to a wall jack?

  If it is a motherboard defective and you replace it with another jury of Vostro 430, you shouldn't have any problems with Windows or Office licenses. Assuming you are using Windows Dell reinstall for exact same version of Windows drive that was installed at the factory, it should not even ask the product key, if you must reinstall Windows on the HARD drive. But even if she asks, there should be a sticker somewhere on the PC with your unique product key so you can enter if the installer made the request.

  and make sure you have the Office product key too...

• C & C generals zero hour cannot find directx

  Original title: update of directx problem

  I had DirectX 9 .0c and updated with the webinstaller (why? thought it was a good thing to do) and now my 8.1 game of c & c generals zero hour cannot find directx

  Hi Renee,.

  1. What is the full error message that you receive?

  2 are you facing the issue only with this game or other games too?

  You can read the following article and check.

  Troubleshooting DirectX

  You can read the following article and check.

  DirectX is properly installed on your computer

• blue screen (setup), saying: Setup cannot find the files temporary installation and press f3, it is that I get

  Original title: unerase my hard drive
  

  I had a work beautifully computer (Dell INSP 6000) until I decided to add Media Center to my Xp - sp3. I bought the drive from a seller on ebay with numbers of coa who did not work. The drive has been formatted by attempts of constant relocation. Using XP and Media Center disks, I can get as much blue screen (setup) saying that Setup cannot find the temporary installation files and press f3. It's that I get. I also have a blue screen telling me to insert the diskette labeled 'Windows Automated System Recovery disk' in on the floppy drive. That's all. I am doomed.

  E-mail address is removed from the privacy *.

  How to request backup discs Dell

• Registration for the web function has stopped working in my copy of photoshop elements 12.  I get this message "the operation could not be completed.  The system cannot find the path specified"reset preferences was not fixed.

  Registration for the web function has stopped working in my copy of photoshop elements 12.  I get this message "the operation could not be completed.  The system cannot find the path specified"reset preferences was not fixed.

  My os is windows 7.  elements of 12 worked fine for several months and then save for web stopped working

• Fs9 (Flight SIM 2004) does not start on my WIN XP with Kaspersky PURE machine. The error message is:

  The error message is:

  Flight Simulator cannot run from a restricted user account and will now quit. Please log in using an administrator account and restart Flight Simulator.

  I'm under it in Administrator account, that he used to work quite happy to!

  I tried to create a new account and it works from there

  XP is up to date through automatic update as it is Kaspersky PURE and my suspicion is that a security update is broken something.

  I checked the privileges of the user account on each component in the path of the c: to FS9.exe and ensured that he has any possible privilege

  I said Kaspersky PURE trust

  I even tried to run with protection of Kaspersky off.

  I uninstalled and reinstalled.

  As you can imagine, I'm at my wits end and I had to postpone my side instrument renewal because I'm out of practice, because I used FS practice and sweeping of the instrument procedures and now I can not!

  Help!

  Hi Pilotjohn,

  You can check if you can contact the Technical Support from the following link.

  Help and Support - Microsoft

• 0X803C0107 error: you cannot access shared files and printers and the MSE does not start at startup

  Original title: mainly MSE does not start at startup. have you tried re-loading and other elements on the card, still no luck. Here is the error code I have and the information complete.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • Error 0X803C0107

    Details of the editor for Windows Firewall troubleshooting

    Verified issues

    You cannot access shared files and PrintersYou cannot access shared files and printers

    You can't access shared folders or printers on a computer on which Windows Firewall is enabled. This happens when the Windows Firewall blocks traffic entering via the UDP ports 137 and 138 and the ports TCP 139 and 445. Checked

    No workingRemote Assistance remote assistance does not

    When you use Windows Help and Support, remote support available to offer assistance to a computer, you receive the error message "the remote server computer does not exist or is unavailable", even if Remote Assistance and file sharing and printing are activated. Windows Firewall may be blocking Remote Assistance. Checked

    Windows Vista may not start Windows Vista FirewallWindows could not start the Windows Firewall

    On a computer that is running Windows Vista, you find that the Windows Firewall service is not running. When you try to manually start the service, you get "Windows didn't start the Windows Firewall on the Local computer." For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service particular 5 error code. "error message. This can occur if the 'MpsSvc' account does not have the necessary permissions for the registry keys concerned. Checked

    Windows Firewall service is not his firewall service is not started

    Windows Firewall service is not running or is not started. Checked

    Issues checked the details of the detection

    6 you cannot access shared files and printers checked

    You can't access shared folders or printers on a computer on which Windows Firewall is enabled. This happens when the Windows Firewall blocks traffic entering via the UDP ports 137 and 138 and the ports TCP 139 and 445.

    Unlock the file and printer sharing in Windows Firewall works not

    To allow access to shared folders and printers, except for the file sharing and printers in the Windows Firewall must be enabled.

    6 remote assistance works not verified

    When you use Windows Help and Support, remote support available to offer assistance to a computer, you receive the error message "the remote server computer does not exist or is unavailable", even if Remote Assistance and file sharing and printing are activated. Windows Firewall may be blocking Remote Assistance.

    Allow Remote Assistance in Windows not running Firewall

    Which allows Assistance remotely as an exception in Windows Firewall it unlocks and corrects this problem.

    6 Windows Vista could not start Windows Firewall check

    On a computer that is running Windows Vista, you find that the Windows Firewall service is not running. When you try to manually start the service, you get "Windows didn't start the Windows Firewall on the Local computer." For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service particular 5 error code. "error message. This can occur if the 'MpsSvc' account does not have the necessary permissions for the registry keys concerned.

    Set permissions for the registry keys concerned not run

    Setting permissions for the registry keys concerned will solve this problem. Applies only to computers by using Group Policy to manage the firewall.

  6 Windows Firewall service did not start Checked

  Windows Firewall service is not running or is not started.

  Start the Windows Firewall service is not running

  Start the Windows Firewall service solves this problem.

  Details of detection

  Collection information

  Computer name: NORMBRESINSKI

  Windows Version: 5.1

  Architecture: x 86

  Time: 09-20-2010 07:51:49

  Publisher details

  Troubleshooting Windows Firewall

  Automatically fix problems of Windows Firewall, such as Windows cannot start the firewall service (0x5) Windows or Windows remote assistance does not work

  Package Version: 1.0

  Publisher: Microsoft Corporation

  You have problems with programs

• Error messages
• Recent changes to your computer
• What you have already tried to solve the problem

Hi Rickbsk,

You can check out the link and check the suggestions provided by scotty1294.

http://social.answers.Microsoft.com/forums/en-us/msestart/thread/05a63b12-1be9-4BD3-898e-64674c1e9afd

If you have not tried all the suggestions above, try and see if it helps.

Hope this information is useful.

Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have itunes 12.4.  When I try to add a new song to icloud music library I see the following message: results of genius cannot be updated because the iTunes Store does not recognize your iTunes library. "Then said to turn off genius, no not such optio

  I have itunes 12.4.  When I try to add a new song to icloud music library I see the following message: "Genius results cannot be updated because the iTunes store does not recognize your iTunes library."  He then ordered me to turn off Genius, and then turn it back on.  There is no option.  Othe impossible of access devices correspond to these songs via itunes.  Any help would be appreciated.

  Hello Subocz E M.

  Thank you for using communities of Apple Support. I see that you had problems adding pieces and turn off Genius. I know how it is important to be able to add music to iTunes. I'm happy to help you.

  Since you are being invited to turn off Genius, you can add music, please use the following information to resolve these two issues:

  Turn on or off the Genius

  If iCloud music library is enabled, you cannot disable Genius.

  Choose file > library > Genius (toggle Genius).

  Turning off the Genius Genius Genius Shuffle shuts and and the Genius Mix.

  12 iTunes for Mac: use Shuffle Genius, Genius or Genius Mix playlists

  Have an amazing day!