flow of Installer for tables with source schemas and destination is different

Similar Questions

• CRUD for tables with large number of columns

  Hello

  I work for a government agency in Colombia, and we do a poll with about 1200 variables. Our database model has few paintings, but they have a large number of columns. Our Oracle 11 g database is, and we do not use Oracle APEX. I've read about APEX and it seems to be useful to generate quick forms and reports. However, I would like to know if it is possible to generate CRUD for tables with many columns, and that would be the best way to do it.

  Thanks in advance.

  Carlos.

  With the help of 250 point on a single page is actually really bad for the user experience. I would probably be it cut into pieces and using several pages to guide the customer through it as a workflow.

  You could also add some pop-up windows which includes some elements of your table, just saved on other pages. But I probably don't like that.

  Tobias

• Table with fixed header and the left column

  I created a table in my application with the fixed left column (left most column is fixed and remaining columns are scrolling from left to right). is it possible to create a table with fixed position and fixed left column?

  Suppose there are 50 rows and 10 columns in my paintings, and only 3 columns and 15 rows are visiable on the screen

  (1) when the user scroll left to right left only most of the columns must be fixed. Remaining cap of the table and column scroll left to right and vice versa. also

  (2) when user scroll high high bottems single topic most must be fixed and remaining all lines (with to the left most column) should be scrollable.

  I am able to put in place a point at the top, but not both. Please suggest

  "If I repopulate the value in the cell when user scrolling, shell, I get scrolling effect correctly as it only shows half cell when the user highlight half of the cell."

  Approach using TablelayoutManager display single cells and scrolling would be cell at a time.  And Yes, you will need to override navigationMovement and n of methods appropriate TouchEvent your TableLayoutManager so that he knows when to fill the cells.

  Another alternative is to have four managers, we don't the the upper left corner (the dead angle), one to make the top row (column headings), one to make the left column (row headings), and the other to do the rest (data).  Place all these in a delicate header and line manager.  Only allow the user to scroll the data part.  Have the difficult Manager to listen the scroll events.  Then have the wily Manager add and remove the dummy column and header line managers as appropriate.  Note that these topic fields would not good passes, they would be either there or they would not be displayed. That would give you your 1/2 a scroll of the cell.  And you wouldn't have to substitute anything to detect movement, you would have left the listener do scrolling for you.

• I've updated for picture with the captain and when I plug in my iPhone it loads the same pictures twice each time how it stop loading the same things every day?

  I've updated for picture with the captain and when I plug in my iPhone it loads the same pictures twice each time how it stop loading the same things every day?  I tried to make the old default iphoto but picture still open when I plug in my iPhone?

  I tried to make the old default iphoto but picture still open when I plug in my iPhone?

  When the iPhone is connected and Photos opens, select iPhone in sideba of the windowr of Photos. Then, uncheck the option 'Open for this iPhone Photos' below the toolbar.  Do this for all your iPhones. The hook should be unmarked for each device individually.

• Dear Sir, I am facing problems with my creative packeger office, I chose to deploy IT, PS and Adobe Dc Pro on some of our clients, but installation is arrived with only HE and PS. What is the problem? Thank you

  Dear Sir, I am facing problems with my creative packeger office, I chose to deploy IT, PS and Adobe Dc Pro on some of our clients, but installation is arrived with only HE and PS. What is the problem? Thank you

  Hello

  Acrobat is what we call an 'exception' and needs a slightly different steps to install.

  The following document gives details on the deployment of both DC and XI of Acrobat since a CCP package versions.

  Using creative cloud | Deployment of Adobe Acrobat

• How to create the table with the rows and columns using the layout?

  One of my friends advised me to put my site on the mode of provision as it is better than the standard as he said
  but I couldnot make an ordinary table with the rows and columns in mode available th
  y at - there someone who can tell me how to?
  Thank you very much

  Wednesday, April 18, 2007 21:01:38 + 0000 (UTC), "Mr.Ghost".
  wrote:

  > A friend of mine advised me to put my whole site on the mode of disposal as its
  > better than standard, as he says

  Your friend won't. Don't listen to him any more. Mode of disposal creates
  very fragile and rigid code pauses at the first opportunity.

  Gary

• Hive - Source address and Destination or a set of addresses

  I have a financial client who has a question on the Source address and Destination or a set of addresses.
  
  They must provide a Source address and destination or a set of addresses, with a mask of network. Oracle has the IP address and Netmask (s) they would need for booty? And they would be the Source or the Destination?
  
  The INVESTIGATION period would come from the server of the hive? The Bank would need specific IPs or a range of IP addresses that will be used. So if all the Beehive exists in 123.456.789.xxx, they would be able to enter like this, but it is best to identify each IP separately.
  
  Also, assuming that the Bank and Oracle are in communication, that can be at the Source and that can be the Destination?
  
  If this isn't something that we can provide them, I may need something - an explanation--give them that could soothe their needs.
  
  Any help on this would be greatly appreciated.
  
  Brent

  Brent,

  Communication between the Bank and the Beehiveonline would normally be via the IP 156.151.25.7, which is the VIP for BeehiveOnline. It would be the two-way channel for communications over https, webDAV and the owners of o and OBEO protocols.

  The only time where we all change is if you use FTPS and because we put passive channels in place data transfer channel is given to one of the Middle-thirds to handle the traffic directly Bank to Oracle would be so throuigh 156.151.25.7 until the connection is established, and then the middle of the year-groups will manage traffic between the 2 extremities-this means that the traffic is two-way on one of the 3 the ip 156.151.31.35, 156.151.31.36, 156.151.31.37 addersses

  I hope this will satisfy the Bank.

  Phil

• The script generation is not supported for Table with XML or UDT column Types

  I get this message trying to generate a script to create a table with an XMLTYPE column.  We use the Oracle Developer Tools for Visual Studio to generate scripts as SQLDeveloper does still not support TFS integration.  He was always pretty easy to generate scripts and maintain control of source code in this way (with the exception of materialized views).  It was great, just right click and generate a script for the project and check it in.  Unfortunately as the adoption of XML grows, we find passage to the SQL Developer more often to perform tasks not supported and then return to the VS IDE to manage source code control.  Free of any chance that it will be supported in the future?

  Yes, our plan is to support several types as time goes by.

  You possibly can speed things along by voting or by filing a request for new feature here:

  http://Apex.Oracle.com/pls/Apex/f?p=18357:46

• CREATE TABLE to another OWNER/SCHEMA and in a different TABLESPACE?

  I am connected to a user of the SYSTEM. Now, I want to create a table of aaa. The owner of this table should not be SYSTEM but user KARL. and STORAGE space should not be SYSTEM but the tdtc TABLESPACE (existing).
  
  As far as I know I can do this by running the following command:
  
  CREATE TABLE KARL.aaa (an INTEGER,...) Tttt TABLESPACE;
  
  Regarding the TABLESPACE parameter, I'm not sure. Is it possible to return a user Karl TABLE in a TABLESPACE that is not assigned to him?
  
  In addition, I have another problem.
  I have a script with hundreds of CREATE TABLE, ALTER TABLE + CREATE INDEX DDL statements.
  Each of them are not prefixed with schema/owner and a TABLESPACE clause.
  
  I can put a single statement at the top of the script somehow that such Oracle
  to use
  -Karl OWNER as a schema/owner for all DDL stements
  -Thomas TABLESPACE as TABLESPACE for all DOF stements
  ?
  
  In MYsql, there is a statement «use < database >» Is soemthing similar to Oracle?
  
  Thank you
  Peter

  Yes... you can do. For example, a user who has a secret password that you do not want to give... as a schema of the application. User B needs to make paintings/objects in A schema and you want to follow this as user B. First configure Oracles Fine grain auditing and then grant "connect via" user A to user B as follows:
  -----

  SQL> create user b identified by abc123
    2    quota unlimited on users;
  
  User created.
  SQL> grant create session to b;
  
  SQL> create user a identified by abc123
    2    quota unlimited on users;
  
  User created.
  
  SQL> grant create table
    2      , create session
    3     to a;
  
  Grant succeeded.
  
  SQL> alter user a grant connect through b;
  
  User altered.
  
  SQL> connect b[a]/abc123@a486
  Connected.
  
  SQL> show user
  USER is "A"
  SQL> create table a.my_proxy_table
    2  ( c1 number
    3  , c2 varchar2(50)
    4  , c3 date
    5  );
  
  Table created.
  

  -----
  See I have connected using the syntax "username [proxyuser]." Also note that user B is by proxy user has, as evidenced by my order 'show user '. The connection through can be granted/revoked as needed without disclosing A goes to B. In addition, your audit tables or xml logs will follow the fact that user B created the table a.my_proxy_table.

  Hope this helps,
  John

• 2808 LAG for use with VMware ESXi and Linux collage

  I posted the month last about setting up my work with groups LAG http://en.community.dell.com/support-forums/network-switches/f/866/t/19537080.aspx servers (I'll effectively implementing implement this Saturday)

  I decided to buy a 2808 for my ESXi server get more aggregated connections to my staff iSCSI Linux server but now I'm worried I might have made a mistake to buy the 2808.

  After looking in the manual before I realized I could have been mistakenly assuming that the 2808 had STP and LACP, as I can't find LACP anywhere in the PDF file. I guess that the configuration of my Linux machine for 802.3ad is out (a hope to make mode 4), so now for the configuration of my house, I wonder (* 1 *) that I have to configure my VMware NIC team like and what mode of binding should I use on my Linux host? As for the section at the top (my working configuration) (* 2 *) I don't know what to do about the road other than the leave as 'route based on originating virtual port ID "? (This is how our other data centers are configured, but I'm waiting for my admin network as agglomerates ESXi hosts are configured with the channels of port on our cisco switches)

  For the House, I want to try to increase the bandwidth by using three NICs in each server, I was hoping that it works:
  VMware: Route of IP hash function?
  w/Linux: balance-alb?

  -VMware:
  Before you begin:

  • The default load balancing strategy is route based on the port virtual origin ID. If the physical switch uses the aggregation of links, route based on the IP hash load balancing should be used. For more information, see host requirements for the aggregation of links for ESX and ESXi (1001938) and the guide of VMware Virtual Networking Concepts .
  • LACP support was introduced in vSphere 5.1 on distributed vSwitches and requires additional configuration. For more information, see activation or deactivation of LACP on a group of ports Uplink using the vSphere Client Web (2034277).
  • Ensure that the Protocol of aggregation VLAN and link (if any) are correctly configured on the physical switch ports.

  -Linux:
  * Descriptions of bonding modes *.
  + Mode 0 balance-rr: Round-robin policy: transmit packets in the sequential order of the first available through the last high school. This mode provides load balancing and fault tolerance.

  + 1 active-backup mode: Active-backup policy: only one slave in the link is active. A different slave becomes active if and only if, the active slave fails. MAC address of the binding is visible from the outside on a single port (NIC) to avoid confusion between the switch. This mode provides fault tolerance. The first option affects the behavior of this mode.

  + 2 balance-xor mode: XOR policy: transmit based [(adresse MAC XOR avec destination MAC traiterait de source) modulo County slave]. This selects the slave even for each destination MAC address. This mode provides load balancing and fault tolerance.

  + 3 broadcast mode: broadcasting policy: transmits everything on all slave interfaces. This mode provides fault tolerance.

  + Mode 4 802.3ad: IEEE 802.3ad dynamic aggregation of links. Creates aggregation groups who share the same speed and duplex settings. Use all the slaves in the active aggregator according to the 802.3ad specification.

  -Prerequisite:
  -1.Ethtool support in the base drivers to retrieve the speed and duplex of each slave.
  -Switch 2.A which takes care of IEEE 802.3ad dynamic aggregation of links. Most of the switches will require some type of configuration to activate 802.3ad mode.

  + Mode 5 balance-tlb: Adaptive load balancing transmission: Channel link that doesn't require any special switch support. Outgoing traffic is distributed according to the intensity of the current (relative speed) on each slave. Inbound traffic is received by the current slave. If the receiving slave fails, another slave takes over the MAC address of the failed receiving slave.

  -Prerequisite:
  -1.Ethtool support in the base drivers to retrieve the speed of each slave.

  + 6 balance-alb mode: Adaptive load balancing: includes balance-tlb plus receive balancing (rlb) for IPV4 traffic and doesn't require any special switch support. Receive load balancing is achieved by ARP negotiation. Link driver intercepts the ARP replies sent by the local system on their way and replaces the hardware address of source with the unique hardware address of one of the slaves in the bond as different counterparts use different physical addresses for the server.

  The topic dell nearest you, I have found a useful was: http://en.community.dell.com/techcenter/networking/f/4454/t/19415629.aspx

  my previous post was more concerned with VLAN tagging and spanning tree issues, but now I see I should have feared groups LAG it as well.

  Any help would be appreciated, thanks in advance all :)

  -

  PS. http://i.dell.com/sites/doccontent/shared-content/data-sheets/en/Documents/dell-powerconnect-2800-series-spec_sheet.pdf said that the 2800 series supports LACP, so if I'm worried about anything on my iSCSI side slap me please in the face, but I guess even in this case, I'm still not sure how to configure the ESXi host because it does not support LACP without vSphere and my original configuration is a free version , so I have no web vSphere management needed to make the LACP allow the change.

  Not sure if it is of no use: example configuration of EtherChannel / switches control protocol LACP (Link Aggregation) with ESXi/ESX and Cisco/HP (1004048), but that's where I was to base the choice on IP hash from.

  It must have the support of layer 3 to achieve IP hash, IP addressing is a 3-layer technology, so a 6200 series or higher or the soon to be released N3000 series.

• Potential problems for tables without primary keys and unique keys

  GoldenGate 11.2.1.0.3/Solaris 10
  DB: Oracle for Oracle (Source and target is 11.2.0.3)
  Topology: unidirectional
  
  
  In our one-way configuration GG, little of the tables being replicated is not a primary key or a Unique key.
  
  Last week when we have implemented GG for the test, we received warnings for these table below.
  

  GGSCI > add trandata WMHS_UD.crtn_dtl
  
  2013-01-12 11:34:33  WARNING OGG-00869  No unique key is defined for table 'CRTN_DTL'. All viable columns will be used to represent the key, but may not guarantee uniqueness.  KEYCOLS may be used to define the key.
  
  Logging of supplemental redo data enabled for table WMHS_UD.crtn_dtl.

  Replication seems to work very well for these tables.
  
  Googling, I think that there may be performance degradation when you replicate tables without PK or the United Kingdom.
  
  But are there other potential problems such as data of a certain kind not replicated to the lack of PK/UK?

  It really depends on the data.

  By default, GG is combining all columns as a virtual primary key but don't no conflict control by default. So when you can be sure that the record you insert into the table is unique, then it will work.
  BUT as soon as you insert the same record, which is already inserted, then you will encounter problems.

  Let me show what happens when you use an initial charge because it makes it easier to describe:
  We start at 10:00 the capture for a table. Now, you insert a record at 10:00 in the tables. When you now start an initial charge to 10.02, then check you have inserted in the database to 10.01 will be repeated two times. During the IPL as the initial charge is made to 10.02 and it includes data of 10.01 AND it will be replicated again through the process of capture/replicate.

• How to name tables with variables (strings and integers)

  If I have berries in the program as

  M1, M2, M3, M4, M5,..., M20. And if I want to choose one of them at random, I have a way to loop in which there is a loop of research for the index number that is found in a table as M1 [1] = 1, M2 [1] = 2 and if I have a random number between 1 and 20, I can loop element tables [1].

  But y at - it another way with directly get the random matrix buy name. For example, I have the random number 14, which directs me to M14. How the name of the table to help me choose the M14 when I number 14...

  It is not clear why you need to do it this way, in particular there is no information on what values are other elements of the paintings.

  In general, there are several ways:

  1. you can have a table 2D - in this way, you need to separate tables and your first random number will choose the first dimension.

  2. you can place your berries in another table:

  var arrayOfArrays:Array = [M1, M2, M3,...];

  And extract them with random number. This is similar to the way 1 because you end up with table 2D anyway.

  3. you can create an object that has properties with the numbers and the values of these properties will be your berries:

  var arrayReferences:Object = {}

  A1: M1,.

  A2: M2.

  ....

  }

  Then you can get the berries with integer like this:

  trace (arrayReferences ["a" + 2]);

  Other means will involve several approaches to OBJECT-oriented programming.

  The last note, everything in AS3 is zero base (especially tables), so you better stick to it even in your naming conventions: M0, M1, etc...

• Table with numeric columns and string

  Hello everyone. I am a new labviewer, so I have 2 questions fundamental.

  1. I found this basic timer loop, which I need to get inside my structure of the event. How to wire this loop with my writing and reading?

  2. I need to wire my digital indicator "Elapsed time" with my table, so I want the 'measure' in the first column and "elapsed time" in the second column. I know I can't mix string and digital indicator in the same table, so the best way would be to make two tables 1 d (digital channel), or there are more basic ways to correct the problem?

  Thanks in advance

  Orlando

  2010:

• Table with the Kindle and generated content in e - pubs design problems

  I encountered a strange problem with e-pub files exported from 5.5 design. It's only a problem with the Kindle, but that in itself is a pretty big problem. This has to do with the way In Design creates tables of contents. As you know, the "Table of contents" function in In Design is what generates the NCX or navigation device in your e-pub. Our books, we also create a linked table of contents in the text of the book. Below is a string of code generated by In Design that shows a typical chapter opening header that is included in the NCX and also back to the table of contents links in the text. The first (toc_marker-10) id is automatically generated by the 'Table of contents' function and corresponds to the id used by the NCX. The second id (Morella) has been created by me using an anchor point and assigning a "destination of the hyperlink" which can bind an element in my table in the text of the content. Then this piece of text is a hypertext link (via as HREF) return to the table of contents page. As you can see, In Design puts the second id towards the end of the code and after the HREF that links to my table of contents page. This works very well on all the reading devices except the Kindle, which seems to become confused by the order of the elements in the code. Amazon said that because this second id comes after the HREF, the hyperlink does not appear on this text (Morella) and the connection breaks. The way around this is simple: just move the second id < an id = "Morella" / > while it comes immediately before the href tag and everything works. But that means getting into the e-pub afterwards and put away all instances of the problem. In addition, there is no consistency in order that design attributes to the elements in the present code. In some cases where the links have been created in exactly the same way, the second id appears before the HREF and the link works fine. It's just a bug or did someone knows if In Design actually uses logic to decide the order of the items below?

  < h4 id = "toc_marker-10" class = "chapternumber" > < a href = "Poe_Short_Stories - 2.html #CONTENTS" > < an id = "Morella" / > Morella < /a > < / h4 >

  It really doesn't seem like a problem of Kindle. InDesign creates an EPUB file, not a Mobi file. It is designed to create an EPUB that will pass validation.

  Creating the EPUB MOBI file is a separate issue and not something that InDesign must concern itself with.

  At this stage of development of eBook (early on), it is quite well provided you will need script or manually change some CSS and XHTML to adjust the vagaries of different devices.

• NT may respond to your request because the source files and destination are the same

  Hi, thanks for reading.

  I'm having this problem and it is driving me crazy.

  I'm actually following a tutorial that you can check it out here: http://nightshifted.Tumblr.com/post/2559360661/tutorial-paused-animations

  Basically, I'm trying to make a gif animated with canvas (I'm sorry if my English is not so great). When I try to drag the layers in the canvas (step 2 of the tutorial), I get the error: "could not complete your request because the source and destination are the same."

  can someone help me? I have CS3 and CS5 and they get the error in both.

  Thank you in advance

  I think they mean Select layers and images and using the tool move, drag

  inside the document (click inside the document window and drag) to move the

  Choose the layers to half superior (transparent area), is not to drag the layers of

  the palette of layers in the document, which would give this error.

  MTSTUNER