Flow text across columns and pages

Similar Questions

• Flow/text formatting problem

  I have a document with text flowing on multiple columns and pages. Sometimes when I change the format of a subtitle or something similar, the text disappears from there on. I turned off the constraint on the baseline grid and sometimes it works and other times it doesn't. What is the cause and what can do about it?

  See if any of your paragraph styles have "Keep with next paragraph" it turned on or keep all options are applied to all.

  To see if this is the case check to keep Options paragraph Styles or select text that happens on press CMD-CTRL + ALT + K

  Sometimes if a line spills onto the following line options Keep might say a piece of text that is larger than the text block to keep together.

• I also have a .csv file with the name of a jpeg file in a column and a text description of each jpeg format in a second column. Is it possible to automatically insert a jpeg (picture) and its corresponding text, each pair on one page, in an Indesign docum

  I also have a .csv file with the name of a jpeg file in a column and a text description of each jpeg format in a second column. Is it possible to automatically insert a jpeg (picture) and its corresponding text, each pair on one page, in an Indesign document?

  Read about to merge data in the help files.

• Dynamic alignment of the value of element column and report page

  Hi friends,
  
  I have an interactive report that contains the columns as
  
  < li > empno
  < li > name
  
  In the light of the foregoing, I 'empno' with an alignment of the left column and a 'name' with an alignment of the left column.
  
  It is possible to substitute the alignment of the data that we put into the report according to the value of the application as element
  
  If my application point is about US, so I need the alignment of the column 'empno' and 'Name' to the left, and if the value of point of my app's AR, I need the alignment of the column 'empno' and 'Name' to be right. What is possible to achieve dynamic alignment for the report data to two columns 'empno' and 'Name', according to the value of application page element.
  
  And also, in the case of the page element, I have a page element with a name of P1_NAME in which he has an alignment of the Horizontal/Vertical element on the left.
  
  I need to this alignment of the element of the page element behave dynamically according to the order of the day of the application page, as if the order of the day of the application page called WE then the alignment of the element of the page item must be left and if the order of the day of the application page called AR and then the alignment of the element of the page element has to be right.
  
  Is it possible to make some friends of my scenario two above. Kindly help me with this.
  
  Thanks in advance.
  
  Brgds,
  Mini

  Hey Mini,

  To change the alignment on the fly, you need a change in your IR and javascript.

  First change the columns that you want to change the alignment for. Add the following code in The HTML Expression in the column formatting part. (Detail of the column)

  #HERE _THE_COLUMN_NAME#
  

  Then you can change the easy alignment for these areas with the following code

  $(".align_style").css("text-align","left")
  

  This can be in a DA, or just on the loading of the page.

  Kind regards
  Kees Vlek
  -----
  Company: http://www.orcado.nl
  Blog: http://www.orcado.nl/blog/blogger/listings/69-kvlek
  Twitter: http://www.twitter.com/skier66
  If the answer to question please change replied and mark the appropriate post as correct / helpful.

  Published by: kvlek on 7-mei-2013 14:47

• Long text flowing incorrectly on the next page field

  Hi guys,.

  I checked the "allow Page Breaks in content" in a subform. I include a field of text in the subform and checked "Allow multiple lines" so if long text cannot fit in the text field in a page, it will continue to the next page. The problem is now in the second page content is not continue from the first page, but it is to copy the content of the first page.

  For example: 8 lines must be inserted in the text field. Only 5 lines can fit into the text box on first page. Then the line 6-8 should continue on the second page. Yes, the text field has 3 lines on the second page, but not line 6-8, it copies the line 1-3 on the first page.

  Anyone has any experience on this or can anyone help me?

  Christiaan

  South Africa

  This is your page 2 & 3.  See how 2 3 flowing

• When I highlight text on a Web page and right click, it now evokes "Yahoo Search". How do I put to Google Search

  If I highlight text on a Web page and do a right-click displays search Yahoo. Before he used to bring up the Google search. How I came to Google please

  Try resetting the browser.search.selectedEngine pref on the topic: config page.

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

  • Use the filter at the top bar of the on: page config to more easily spot a preference.
  • Preferences that have changed see the bold (user set).
  • Preferences you can restore the default value or change via the context menu.

• What is the differece between a Standard report column and that is set to display text (escape special characters)?

  Hello friends,

  My requirement is

  I want to create a table. Presents some columns to display text.

  so my question is,

  What is the difference between a Standard report column and display text (escape special characters) in the attribute column property?

  Kind regards

  Arianne.

  Hi ujwala1234,

  ujwala1234 wrote:

  Hello friends,

  My requirement is

  I want to create a table. Presents some columns to display text.

  so my question is,

  What is the difference between a Standard report column and display text (escape special characters) in the attribute column property?

  Kind regards

  Arianne.

  Here is the difference:

  • Standard report column: this is used when your column in the SQL query returns the HTML markup. For example the query SQL with APEX_ITEM API columns or columns where you have mixed data in the column with the markup. In short, APEX rendering engine treats the column as HTML markup and analysis accordingly to display the required HTML element.
  • Display text (escape special characters): this type analysis the column data in the form of data stored in the database (no HTML). During analysis if the data contains special characters then it escapes and displays the data.

  Yes, you can mix the manual in the form of built on APEX_ITEM with normal standard report (display text) columns.

  I hope this helps!

  Kind regards

  Kiran

• Since I did the update, my master pages don't parpadean more good, there are texts that disappear and fonts which are not well displayed. It worked before. Can you help me?

  Since I did the update, my master pages don't parpadean more good, there are texts that disappear and fonts which are not well displayed. It worked before. Can you help me?

  Yes, thanks it works!

• Captivate 8 does not "apply text and properties of text across all views."

  I want to have my text properties 'reset' overall views that I read in Captivate 8 is possible. The function States help Adobe:

  "You can now reset the properties of reactive text items or update all views to match the properties of the currently selected text element. To apply the text and properties of text across all points of view, the context menu is provided. This setting relink objects through points of view in the projects of reactive nature. »

  
  

  However, when I right click on my text from the caption of the fly out menu doesn't have this option. I have attached a picture of what looks like the fly on the menu. Any ideas how I can 'reset' after you move things around?

  Hello

  You use the latest version of Captivate 8.0.1? If this isn't the case, it does not. Please follow the instructions @ Adobe Captivate Help | Adobe Captivate patch 8

  Hope this helps,

  -Jacob.

• Work with text and page border

  I work with an old educational version of InDesign, trying to put a box/page border (using the rectangle tool; no fill) round a page in a book resource, but the text will not display... figure shows, but the text will not be little matter what I do... I tried arranging, layers, but can't make it work. What I am doing wrong? I never had this problem with PageMaker.

  If you go to object > text frame Options you can put a check mark next to "Ignore the text of not dress" for this image (assuming that you have need of the other text wrap on the page).

• Columns in Pages

  I want to translate text and therefor I want to insert 2 columns in a Pages document, so that the original text in the first column and the second (right most) the translated text.

  When the columns are filled with text, the overflow goes up > down and from left to right. Then the next page up > down and left to right etc. What I want to accomplish, it's that my text remains in the column where I started it and all that it has length. A text box is also not possible, because it is not automatically adapt to the length of the text, and it remains on the page where it could / created.

  Is this possible?

  concerning

  Hans

  Columns in the Pages are not independent, and text flows from the first in the second and on a page break, second text column first runs into the first column on the new page. Instead, you must use a two-column table that overflows the page boundaries. Content in the individual table columns will remain in these columns in the following pages.

  With the table selected, visit tab reorganize Panel Format and define the Placement of the object to move the text and the text wraps Inline with the text. This will allow the table to overflow the page limit. In the text of the table tab, there will be an option to return the text in the cell, so that your text will end if necessary. You can also remove all grids table if that is your case of presentation. The view menu: see available that will help to position the contents of your table.

• How to put text in columns in InDesign?

  Hello

  I'm creating a brochure in two columns in InDesign CS3. I would like to put some text in a column. However, when I try to place text in a column, the text does not align with the edge of the column and instead of it, is placed in a large text box that spans the width of the page. How can I make text go in one of the columns? Is there a setting that I need to have chosen?

  I'm still new to this program, so any help would be appreciated.

  Thank you

  -Mike

  Manish_1988 wrote:

  as always, Bob is right, you have landmarks of column on your page, but no frames

  So create a large text block is equal to the size of your pages, then go into "Object--> block of text options" and enter the space of plate and the gutter of the number that you have defined for the column guides, this will create the text frame with the column that will be constrained for the column guides.

  Then place the text and check

  First of all, let's be perfectly clear that "place" has a specific meaning in InDesign: import from an external file. Placing the text does not include paste it from the Clipboard or by typing directly into a frame.

  It is NOT necessary to have all the frames on the page at all when you place text, and what happens depends entirely if there are empty frames and where you click, and if you click on release, or click and drag before releasing or if you add the key Shift or Alt/Opt When you click.

  If there is a frame, ID should put some text in there as long as you click on and release into the open area of the frame away from the guides. If you click on a guide, however, ID will ignore the existing framework and draw a new. Click and drag always draws a frame which correspondes to the location and shape as you drag.

  If there is no frame, click on and release will draw a frame at the top to the coordinate y where the mouse is clicked. This framework will extend to the margin of the lower guide, and it will fill the space between the column on each side of the coordinate guides x where the cursor was clicked, if you click on actually inside a set of column guides. If you click in a box gutter the framework will start where you click and the width of a column, but does not relieve the guides. By clicking on the pasteboaed or in the margin is similar.

  Add shift when you click on and release will debit all the text in the history. ID will add images and or pages to the need to keep all the text. Added frames will be strung to your first image and fill the column guides of top margin to the bottom margin. Adding Alt or Opt puts you in semi-auto Flow - your text is fillonly a framework, but the cursor will remain charged so that you can create a new mount threaded to the first in a location/size of your choice. Holding the two works very similar to just holding the SHIFT key, but ID will flow only as much text you have space to - no new pages will be added - and the rest will be in excess.

• frames of text block on master pages

  I use InDesign CS4. I created a master page from left and right - each master page has two text blocks. All frames are threaded, starting with the first picture on the left mask, then the second image on the mask on the left, which is then threaded to the first image on the good master, which is bound to turn the right on the right master frame.

  When I throw the text in blocks of text on layout pages, the text flows from the first column of the first page to column on the next page and so on.

  Is there a way to force the text to flow in the same way that frameworks are configured on master pages? In other words, I want a page layout, text is flowed by the first column of the first page, in the second column on the first page, to the first column on page 2, in the second column on the second page and so on.

  Are you that flow directly into the main frame, or you would outweigh the first one before placing the text? Substituted executives are no longer a part of the master plan of thread, but I think if you had column giudes implemented this autoflow elapse even through all the columns in the page, even if she was not use key frames. A little confusing, to say the least.

  Can you post a blank doc with this master page somewhere and give us a link here?

• Is it possible to text on the next page?

  I do a form of sheets of A4 format with repeating field and shape of text to the next page flow/objects. is this possible?  pls help.

  Hi Tangnamofool2,

  It is possible with the following things supported:

  (1) make sure that the subform/Page parent in which you have repeating field has the content value sank

  (2) make sure that the option "allow Page break in content" is checked

  If you have any question, you can send the form to me @ [email protected]

  Thank you

  Kumar

• I need to convert PDF to Excel, however, the columns and tabs make many merged cells and the number of columns empty. In addition to not separate the columns properly, I see many not separate lines together in the same cell. I think same as Adobe Acrobat

  I need to convert PDF to Excel, however, the columns and tabs make many merged cells and the number of columns empty. In addition to not separate the columns properly, I see many not separate lines together in the same cell. I even think that Adobe Acrobat Pro DC has limits. There is no way to set what points in columns to force the column break? Or create several columns that are unnecessary? How column in Excel, size fixed when import us text and define where breaks have columns of text?

  Google Tradutor para empresas:Google para appsTradutor sitesGlobal market Finder traducao Toolkit

  Acts traducao Instantaneasobre o Google TradutorCelularComunidadePrivacidade e TermosAjudaEnviar comments

  PDF does not contain columns, lines, formats, styles or other aspects of word processing or spreadsheet file formats.

  This is because the PDF is decidedly not a file format of word processor or a spreadsheet or something 'like' one of these.

  (see ISO 32000 for what PDF "is")

  Which allows to optimize the export of the content of a page PDF is to start with that tag well formed PDF (ISO 14289-1, PDF/UA-1).

  Without that export is what it is and we performs the cleanup of any necessary content using the native application for the export of files (MS Word or Excel).

  Be well...