FM and the FX format specifier.

Similar Questions

• How to save the book Photo and the current format before you create a new

  I want to discover a new book and format using the same photos (than my current one) - I'll lose the current if I choose the size and the Format change?

  I lose the current if I choose the size and the Format change?

  Yes. The old book will be lost.

  Make a duplicate of your book and try the other themes on the copy.

  Switch to another theme can reformat a few pages, this text may be lost.

  CTRL-click on the book in the library of Inspector in the sidebar and click "duplicate".

  

• Media Go - Kbps and the AAC format

  OK, so I want to copy some of my music CD albums original to my computer using Sony Media Go program. I would like to record the best quality I can.

  There as a default on Media Go: AAFC and 256 Kbps when you import CD. I noticed that I can also choose 320 kbps with the AAC format. Is it done any good? This 320 Kbps is greater than 256 Kbps? Is it still possible because I couldn't find the information from Google.

  The highest bit rate use you the best quality in terms of quality, 320 so preferred.

  For best quality, you must instead use FLAC but which make the much larger files and not all players allow.

• Windows Movie Maker and the new format of MP4 file on digital camcorders

  My new recordings of Samsung digital camcorder to the MP4 file format.  Even after I convert a wmv file, 4 of the 5 videos will not 'Save' or 'Release' in WMM.  Y at - it a new WMM version that will be important and 'save' the MP4 videos and not only the AVI (like my Flip pure digital camcorder)

  My new recordings of Samsung digital camcorder to the MP4 file format.  Even after I convert a wmv file, 4 of the 5 videos will not 'Save' or 'Release' in WMM.  Y at - it a new WMM version that will be important and 'save' the MP4 videos and not only the AVI (like my Flip pure digital camcorder)

  ==================================
  No promises but perhaps Windows Live Movie Maker
  worth to try:
  http://download.live.com/MovieMaker

  How did you convert the .mp4 files?

  The following freeware might be worth a try:

  Format Factory
  http://www.pcfreetime.com/

  If this does not work, try Windows Media Encoder:

  Windows Media Encoder
  http://www.Microsoft.com/windows/windowsmedia/forpros/encoder/default.mspx

  How to convert in .wmv .mp4
  using Windows Media Encoder

  Open Windows Media Encoder

  On the screen of the new Session / Wizards tab...
  choose... Convert a file / OK

  On the file selection screen. Go to the
  . MP4 source file you want to convert you...
  Maybe to open files of type menu
  window and choose... All files before...
  see the .mp4 file.

  Also, search for and select a folder record and
  Enter a name for your converted file.
  Save button / next

  On the Distribution of content screen I usually
  Choose "Archive file" / next / finish.

  When you see the screen of "coding of the results.
  the task is complete.

  Good luck... John Inzer - MS - MVP - digital media experience

• conversion and the time format

  Hello world
  
  I have fields: start_date and Start_time.
  
  Example:
  
  Start_date: 2010-11-05
  Start_time: 23:18:06.687Z
  
  What I need, is to add 2 hours in time and change the format as HH24:MM:SS and if the new time goes beyond midnight the start_date should be updated with 1 date of.
  
  Any ideas?
  
  Sedso

  Any ideas?

  Sedso

  You can use TO_DATE add 2 hours and TO_CHAR to split your date and time components.
  But it's an exaggeration...

  SQL> -- generating sample data:
  SQL> with t as (
    2  select '2010-11-05' start_date, '23:18:06.687Z' start_time from dual
    3  )
    4  --
    5  --  actual query
    6  --
    7  select start_date
    8  ,      start_time
    9  ,      to_date(start_date||' '||substr(start_time, 1, instr(start_time, '.')-1), 'yyyy-mm-dd hh24:mi:ss') dt
   10  ,      to_char(to_date(start_date||' '||substr(start_time, 1, instr(start_time, '.')-1), 'yyyy-mm-dd hh24:mi:ss')+2/24, 'yyyy-mm-dd') new_start_date
   11  ,      to_char(to_date(start_date||' '||substr(start_time, 1, instr(start_time, '.')-1), 'yyyy-mm-dd hh24:mi:ss')+2/24, 'hh24:mi:ss') new_start_time
   12  from   t;
  
  START_DATE START_TIME    DT                  NEW_START_ NEW_STAR
  ---------- ------------- ------------------- ---------- --------
  2010-11-05 23:18:06.687Z 05-11-2010 23:18:06 2010-11-06 01:18:06
  

• How can I change the color of the background of the active window in Windows 8 (and the text format/color window)?

  In all versions of windows, we could change the color of the active windows (not just the border, but the color of real background in windows as well as the font type and color).  How can I do this in Windows 8?  The option does not appear in the Customization screen.

  Found the fix. Right-click on the desktop and choose "Customize".  Under my themes, choose the high contrast theme (select all). Once this is done, under the themes is a box that will say 'color' "high contrast". Go in there, and you can now customize Windows background, text, hyperlinks, text disabled, Selected text, window pane, Inactive window tile and button. AKA, I have no need to watch a white background in my active windows, which is nice!

• Validate the Date Format

  Apex 3.2

  I have a field called P14_START_DATE.

  Display as a type is Date Picker (jj. MM. YYYY).

  Now, if the user is using the pop-up calendar, the field is filled with for example 07.12.2013.

  I have 2 standard validations, not null and specified element is a valid date.

  If the user decides to enter the date, they can use a different format, for example 12/07/2013, I don't want to happen.

  How can I validate the field, so that they get an error if they do not use the exact format

  Gus

  GusC wrote:

  If the user decides to enter the date, they can use a different format, for example 12/07/2013, I don't want to happen.

  How can I validate the field, so that they get an error if they do not use the exact format

  Create a PL/SQL function to return Boolean validation for the article and try to convert the value of the element to a date by using the format mask FX to require an exact match between character data and the model format.

  declare
  
    d date;
  
    invalid_date_format exception;
      pragma exception_init(invalid_date_format, -1861);
  
    invalid_date_length exception;
      pragma exception_init(invalid_date_length, -1862);
  
  begin
  
    d := to_date(:p14_start_date, 'fxdd.mm.yyyy');
  
    return true;
  
  exception
  
    when invalid_date_format or invalid_date_length
    then
      return false;
  
  end;
  

• Can I change the date format day/United States (month day year) in the United Kingdom (date month year)?

  When I consult databases via Firefox, the format of date/day is set at: day, month, year (AMERICAN style), while I need, day, month, year, I work in the United Kingdom and the 'bad' format is VERY confusing and could lead to errors and mistakes. IE has that format, but I don't want to return to using that.

  You use the English (United States) version of Firefox ESR 24.3.0. You can download the English version of (British) below:

  • http://www.Mozilla.org/Firefox/organizations/all/

  1. under Options - content - language, make sure that English/United Kingdom [en-us] is located at the top of the list.

  • Web content settings, pop ups, fonts and languages

  2. in the Windows Control Panel category, region and language, make sure that the short Date is set at your convenience.

  • http://Windows.Microsoft.com/en-us/Windows/change-dates-times-currency-measurements-display

  You can check the date and time at the library of Firefox, bookmarks category format. Press Ctrl + Shift + B to open it, and then note the dates in the added to the right column.

• The time format

  Hello

  just a small comment on French and the time format: now, it is written in non-French format (0:00-12:00 a.m..) while in France, we use a time format 24 hours (0 h 00 - 24 h 00)

  Thanks for the comments. We relaierons this to our product team.

  Best,

  Socialcast VMware team

• Sloow SAN performance. How can I confirm the vmfs format?

  Best practices says format SAN storage through the VI client.

  This is done for the blocks and the SAN pieces line up properly.

  It also provides more efficient storage for initial commissioning management and ongoing management of shared storage resources.

  How can I check the san and the vmfs format is aligned properly?

  Current situation of our under execution SAN:

  the 4 mb block size

  filesystem 3.31

  Also where do I check for bottlenecks and performance problems?

  Double post:

  Re: Sloow SAN performance. How can I confirm the vmfs format?

  André

• File and folder name format

  What is the correct file and the name format for photos and folders files. Use "-", "_", "." when separating the names? And how many characters are allowed in Photoshop or Lightroom?

  What is the correct file and the name format for photos and folders files

  Any name in your operating system should work.

  Use '-', '_', '. '.

  There is no problem to use the dash or underscore. I have never tried creating a file name with a period in it (except for the file extension), so I don't know.

  And how many characters are allowed in Photoshop or Lightroom?

  Yet once again, this is controlled by your operating system. What is legal in your operating system should work.

  Which brings a question side... most people don't much worry about the details of the file and the file naming... There are ways to organize, using keywords and other metadata in Lightroom, where these questions about the file and the file naming disappear... Add as many keywords as you had huge and similar legends long with all kinds of special characters, this isn't a problem. Using the folder and file names as organization tool has some limitations.

• Too little of the format specifiers.

  Hello someone can help me format this correctly? It keeps giving me the error too little the format specifiers.

  At some point, you mixed up of your string format and you put the string name. Wire directly your group name in the name of Group on the TDMS VI entry. And then thread the pipe name format string in the format string driveway. See here:

  

  You must do this to 3 loops.

• WMM edition error message - ' cannot publish to the specified location. Check the source files and the location is still available and that there is enough disk space. »

  I made a movie of 30 minutes or more in WMM, some of the videos that I imported I had to convert to wmv, to import into WMM. Once I went to publish the movie, after the publication of about 1%, an error message pops up saying something like "cannot publish to the specified location. Check the source files and the location is still available and that there is enough disk space. "I have 8 GB of free space on my hard drive and I tried to burn a cd on a dvd, and save to memory stick, none of them have worked, the same message is displayed even if they have sufficient space available. There is no red x in the videos or photos that I imported, so no files are missing. Some files have been moved when they were converted, but the movie plays well in WMM.  I want to export to is in my documents is therefore always available. I spent hours trying to figure this out and I I still don't know what the problem with it! Help! I've also spent a lot of time to their conversion to avi to see if this helped and the same message appeared again.

  What is the format of your source of debtor files and how did you convert
  TO WMV?

  I can only imagine that you are using Vista Movie Maker 6?

  It's not really about the location... error messages can be very cryptic...
  The error that you mentioned usually appears when the source files in the project
  are damaged or are not fully compatible with Movie Maker and made
  in a movie file cannot continue. In addition, large complex projects can cause
  in this issue.

  In some cases, it may be possible to record in DV - AVI, during registration as
  . WMV fails: the following article explains how to save... Publish it in film...
  6 machine and the graphic link shows where the option:

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  The following chart shows where the DV - AVI option.
  http://www.Papajohn.org/IMGs/Vista-PublishToComputerChoices.jpg

  If the recording as long as DV - AVI fails... see the following articles:

  Movie Maker - problem resolution - "cannot record a movie.
  http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.html

  Windows Movie Maker error
  Cannot complete the Save Movie Wizard
  http://moviemakererror.blogspot.com/

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv
  Audio - wav, wma, wmv

  Sometimes, it can help if you are going to... Tools / Options / Compatibility tab...
  and uncheck all filters.

• Firefox uses my specified windows Win7 and the style of the toolbar

  I am running Win7, but have the style of window, the 'Classic' value, i.e. no aero or whatever it is. Just a simple blue title bar, any other area header in gray, as the default theme in Win-98/Win-NT/Win-2000. Suddenly after a few Firefox-automatic update to 29.0.1 the toolbar at the top of the page "file edit etc" is in a strange bluish color and the same with the tabs.

  I expect Firefox to use EXACTLY the general Windows theme that I've specified in Win7, not to invent other colors. This is the main idea with specification of a theme, for all applications on the same topic. How can I control Firefox to apply the theme to Windows?

  Hi eplgh,
  Please check the title bar customization in the Menu with three horizontal lines. This is alternate tabs to have their own color once again.

  I hope this helps.

• Mozilla firefox add-ons Manager page is not in the correct format and error in installing addons?

  page of the Add-ons Manager makes its appearance in the basic format and when I search for add ons, it shows the result, but without images (to the basic format). Cannot install them too.

  If you can, take a snapshot and post it here for us to see.
  
  To better help you with your question, please provide us with a screenshot. If you need help to create a screenshot, please see How to make a screenshot of my problem?

  Once you have done so, attach the file to screen shot saved to your post on the forum by clicking on the button Browse... under the box to post your reply . This will help us to visualize the problem.

  Thank you!