FMS 3.5 upgrades is not binding to ports 80, 1935

Similar Questions

• QUdpSocket is not binding to port 1900

  I'm working on a program that needs to listen on udp port 1900 to boradcast multicast and the discovery of a component in a network ( SSDP enables discovery of UPnP devices).  The code is already done and works perfectly on my Alpha BB10Dev, but when I try to run it on the limited edition of BB Z10 I get error (the related address is already in use).

  BB10 OS Alpha Version 10.9.10.35

  BB Z10 OS Version 10.0.9.2372

  This port is no longer available for the production of operating system? or there's a problem with the Version of the OS on my Z10?  I did not upgrade my Z10 to SOMETHING more recent.

  any suggestion?

  Problem found, the MediaSharing Services of blackberry bind to 1900 and do not share the port.  To link to the port, you must disable the MediaSharing service on the settings and it works immediately.

• Lenovo B590: RAM upgrade is not detected

  Hi all

  Yesterday, I bought a chip of PC3-12800 CL11 204 pins SODIMM RAM Kingston 4 GB of my local store of hardware because I wanted to update my Lenovo B590 memory, which - by default - has 4 GB of DDR3 RAM installed. I have double checked if memory was compatible with my B590 calling Lenovo support and searching the Web (which gives this message, for example). The two sources confirmed the upgrade should not be a problem if I did not exceed the limit of 8GB. However, after that I had plugged the RAM, I found that it was not recognized by my OS (Windows) and my BIOS. They are always saying that I only have the factory installed 4096MB.
  How can I make my system use this RAM upgrade? Please help, you have my gratitude!

  Note: when I determine which RAM to buy, I've checked also which type of memory was already installed in my B590 by the manufacturer. I unscrewed my notebook and found a chip, brand Hynix memory, I assumed it was a single 4GB chip. However, the search results for of his series on the web show it is in fact a DDR3 SDRAM 2 GB chip. I checked my hardware, but could not see any other chip (even though I'm 100% sure that my system has 4 GB of RAM installed by the manufacturer). If this has nothing to do with the above? Thanks again!

  RESOLVED: The RAM chip is not inserted properly in the additional location. All works fine now.

• Octoshape streaming services: could not bind to the local host. Please check your firewall configuration

  Original title:

  Octashape streaming system

  Hello

  A dialog box appears on my screen:
  Octoshape streaming services: could not bind to the local host. Please check your firewall configuration

  What should I do?

  And if this does not work between the firewall what is the solution?

  Thank you!

  [Moved from the community centre of Participation]

  You seem to have installed a useless program, Octoshape.

  http://www.bing.com/search?q=Octoshape

  You should be able to remove it from programs and features (or the list of installed programs, depending on your version of Windows.)

  Don

• Cannot access Windows software for Information management. Windows XP Professional Windows 8 Pro upgrade will not work.

  It started a month or two ago when the print spooler has stopped working. 'Systems', or had no dependencies. It turns out that none of the services had dependencies, but everything still worked (except the print spooler). Then, I could not access "system information". I tried to restore to an earlier date, that wouldn't work. Tried to do a picture of Macruim Reflect - no luck there either.  My laptop works fine, although slow. Got the printer to work. This lack of progress, I decided I would just upgrade to windows 7, then decided to Windows 8. Me am upgrading of Windows 8 Pro: he went through "preparation" 100% of the screen. On the screen "Get The Latest" I tried 'install updates now' and 'no thank you', the results were the same. On the page "Check your system", he comes back: 'something has happened. Sorry, we're having some difficulty to determine if your PC can run Windows 8. If please close Setup and try again. "He wouldn't have spent so far. The problem may lie in the fact that the upgrade can not see the information system and/or can not say that I am on Windows XP. Is there something I can do for the upgrade to continue?

  Hello

  Most of the older machines running XP are not compatible with the help of Windows 8.

  Follow these steps before you install Windows 8.

  Go to your laptop manufacturer's website and check if Windows 8 drivers are available for your make and model laptop.

  If this is not available, Windows 8 does not work for you.

  Download and run the Windows 8 Upgrade Assistant of to see if your machine is compatible Windows 8:

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  "System requirements" Windows 8 ".

  http://Windows.Microsoft.com/en-us/Windows-8/system-requirements

  See you soon.

• lost internet, tcp/ip is not binding to connect to the local network.

  cannot access internet on network adpt since Saturday, January 22, 10.  said Network Diagnostics does not bind ip to connect to the LAN adpt.  When I go to L A Conn ipv4and6 properties are both checked.  I uninstalled and reinstalled the ptba and ip lan protocols.  ipconfig/all shows no IP information.  I have reset the battery.  network of diag stills said make sure that tcp/ip4 and ip6/tcp are selected in the config to connect to the local network [but they].  TIA

  try to uninstall and reinstall the network drivers and check if that helps

  For more information, you can refer to:
  http://www.madboa.com/geek/SOHO-bind/
  http://TechNet.Microsoft.com/en-us/library/cc977313.aspx

• WINDOWS ANYTIME UPGRADE IS NOT AVAILABLE IN THIS EDITION OF WINDOWS

  has installed windows 7 pro on pc when I try to update to ultimate pop a message "WINDOWS ANYTIME UPGRADE IS NOT AVAILABLE in this EDITION OF WINDOWS.

  I can't contact my manufacturer to pc because I changed to long distances.  Can you please tell me how to get rid of the message and upgrade to the version of windows

  Hi Isabelle,.

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem can occur if necessary, updates are not installed or not installed in Windows.

  I suggest you use the steps in this article and check if it helps.
  Reference:
  Windows Anytime Upgrade fails with the error "anytime upgrade failed. Go online to solve the problem.
  https://support.Microsoft.com/en-us/KB/2658652

  Additional information:
  Upgrade to another edition of Windows 7 by using Windows Anytime Upgrade
  http://Windows.Microsoft.com/en-us/Windows7/help/videos/upgrade-to-another-edition-of-Windows-7-by-using-Windows-Anytime-Upgrade

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Windows Anytime Upgrade was not successful, try again to upgrade - WHY WHY WHY?

  I bought Anytime Upgrade Home Premium Online and I am trying to upgrade.

  Everything is fine - after checking the key, accepted the terms, clicked on the next button and start the system to be upgraded.
  But after a looooooong time, it says "Windows Anytime Upgrade was not successful, please retry the upgrade."  WHY? WHY?  WHY?
  I tried to re-setting level for many times.

  Try to upgrade your Netbook to Windows 7 SP1, then try again the anytime upgrade:

  Learn how install Windows 7 Service Pack 1 (SP1)

• Windows 7 upgrade fails error is "Windows Anytime Upgrade is not in this edition of Windows.

  I have a Toshiba bought in Australia with Windows 7 Home Premium. I bought a key to upgrade to Ultimate, but when I try to run Windows Anytime Upgrade (be it 'Search' or the control panel) I get a message "Windows Anytime Upgrade isn't in this edition of Windows. I can't find anything on the web that helps: each site assumes that you can run Windows Anytime Upgrade! What is a registry problem?

  I have Service Pack 1 is installed, and Windows 7 is activated.
   
  Original title: problem upgrading to Windows 7 Ultimate via Windows Anytime Update

  Take a look at these discussions, the information could help you:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Windows-Anytime-Upgrade-is-not-in-this-edition/6945eacd-7376-4437-9efb-51b4d6fe7f7a

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Windows-Anytime-Upgrade-does-not-work-with-Edition/53b5b2c0-CFAA-422C-A638-e6228e0cad41

• Configure Apache HTTP Srvr for WLS12c error - "address already in use: make_sock: could not bind to address 80.

  Hello the Experts of Oracle.

  I already have

  1. installed the Apache HTTP Server (with libraries)
  2. Downloaded the Plugin of Apache WLS12c
  3. copied the plugin files into the appropriate directories.
  4. Modify the httpd.conf (see below)

  At the present time, I try to start the Apache HTTP server and runs in an unexpected error.

  WHY APACHE ATTEMPTS TO LISTEN ON PORT 80. ?  I've SPECIFIED the PORT 8888

  Question: How to go beyond the error.   -| "Address already in use: make_sock: could not bind to address 80 '

  My server is 192.168.1.21.  In my view, that it has ESTABLISHED processes.  Yet, he reports, that it cannot start.

  

  Here is the content of the httpd.conf file.  My customizations are in Red.

  #

  # This is the main Apache HTTP server configuration file.  It contains the

  configuration directives # that give the server its instructions.

  See # < URL: http://httpd.Apache.org/docs/2.4/ > for more information.

  # See especially

  # < URL: http://httpd.Apache.org/docs/2.4/mod/directives.html >

  # for an analysis of each configuration directive.

  #

  # Do NOT simply read the instructions here without understanding

  # what they do.  They are there only as advice or reminders.  If you do not know

  # consult the online documentation. You have been warned.

  #

  # Configuration and logfile names: If the file names that you specify for a lot

  number of files in server control begin by "/" (or "drive: / 'for Win32 '), the

  # server uses this explicit path.  If filenames do * not * start

  # with "/", the value of ServerRoot directive is preceded by - both "logs/access_log".

  # with ServerRoot set to "/ usr/local/apache2" will be interpreted by the

  # Server as "/ usr/local/apache2/logs/access_log", considering that "/ logs/access_log".

  # will be interpreted as "/ logs/access_log".

  #

  # ServerRoot: The top of the directory under which the server tree

  # configuration, error and the log files are kept.

  #

  # Do not add a bar slash at the end of the directory path.  If you point

  # ServerRoot to non-local disk, remember to choose a local drive on the

  # Directive Mutex, if based on mutex files are used.  If you want to share the

  # ServerRoot even for several demons httpd, you will need to change to

  # PidFile less.

  #

  ServerRoot "/ usr/local/apache2.

  #

  # PidFile: The file in which the server should record its process

  ID # when it starts.

  #

  PidFile ' / usr/local/apache2/logs/httpd.pid '.

  #

  # Mutex: Allows you to set the mutex mechanism and the mutex file directory

  # for individual mutex, or change the default global values

  #

  # Uncomment and change the directory if mutexes are based on files and the default

  # mutex file directory is not on a local disk or is not suitable for some

  # other reason.

  #

  # Default Mutex: newspapers

  #

  # Listen: Allows you to bind Apache to specific IP addresses and/or

  ports #, instead of the default value. See also the < VirtualHost >

  directive #.

  #

  # Change this to listen on specific IP addresses below for

  # prevent Apache glomming on all related IP addresses.

  #

  # Example-> look 12.34.56.78:80

  # Listen api.astcorporation.com:8001

  Listen 8888

  #

  # Dynamic Shared Object (DSO) Support

  #

  # To be able to use the features of a module that was built as a DSO you

  # duty place corresponding 'LoadModule' lines at this location until the

  # directives that it contained are actually available _avant_, that they are used.

  # Modules statically compiled (those listed by "httpd-l") is not necessary

  # to be responsible here.

  #

  # Example:

  # LoadModule foo_module modules/mod_foo.so

  #

  LoadModule authn_file_module modules/mod_authn_file.so

  #LoadModule authn_dbm_module modules/mod_authn_dbm.so

  #LoadModule authn_anon_module modules/mod_authn_anon.so

  #LoadModule authn_dbd_module modules/mod_authn_dbd.so

  #LoadModule authn_socache_module modules/mod_authn_socache.so

  LoadModule modules/mod_authn_core.so authn_core_module

  LoadModule modules/mod_authz_host.so authz_host_module

  LoadModule modules/mod_authz_groupfile.so authz_groupfile_module

  LoadModule modules/mod_authz_user.so authz_user_module

  #LoadModule authz_dbm_module modules/mod_authz_dbm.so

  #LoadModule authz_owner_module modules/mod_authz_owner.so

  #LoadModule authz_dbd_module modules/mod_authz_dbd.so

  LoadModule modules/mod_authz_core.so authz_core_module

  LoadModule modules/mod_access_compat.so access_compat_module

  LoadModule auth_basic_module modules/mod_auth_basic.so

  #LoadModule auth_form_module modules/mod_auth_form.so

  #LoadModule auth_digest_module modules/mod_auth_digest.so

  #LoadModule allowmethods_module modules/mod_allowmethods.so

  #LoadModule file_cache_module modules/mod_file_cache.so

  #LoadModule cache_module modules/mod_cache.so

  #LoadModule disk_cache_module modules/mod_cache_disk.so

  #LoadModule cache_socache_module modules/mod_cache_socache.so

  #LoadModule socache_shmcb_module modules/mod_socache_shmcb.so

  #LoadModule socache_dbm_module modules/mod_socache_dbm.so

  #LoadModule socache_memcache_module modules/mod_socache_memcache.so

  #LoadModule macro_module modules/mod_macro.so

  #LoadModule dbd_module modules/mod_dbd.so

  #LoadModule dumpio_module modules/mod_dumpio.so

  #LoadModule buffer_module modules/mod_buffer.so

  #LoadModule ratelimit_module modules/mod_ratelimit.so

  LoadModule modules/mod_reqtimeout.so reqtimeout_module

  #LoadModule ext_filter_module modules/mod_ext_filter.so

  Request_module modules/mod_request.so #LoadModule

  #LoadModule include_module modules/mod_include.so

  LoadModule modules/mod_filter.so filter_module

  #LoadModule substitute_module modules/mod_substitute.so

  #LoadModule sed_module modules/mod_sed.so

  Modules/mod_deflate.so deflate_module #LoadModule

  LoadModule mime_module modules/mod_mime.so

  LoadModule log_config_module modules/mod_log_config.so

  #LoadModule log_debug_module modules/mod_log_debug.so

  #LoadModule logio_module modules/mod_logio.so

  LoadModule env_module modules/mod_env.so

  #LoadModule modules/mod_expires.so expires_module

  LoadModule headers_module modules/mod_headers.so

  #LoadModule unique_id_module modules/mod_unique_id.so

  LoadModule setenvif_module modules/mod_setenvif.so

  LoadModule modules/mod_version.so version_module

  #LoadModule remoteip_module modules/mod_remoteip.so

  #LoadModule modules/mod_proxy.so proxy_module

  Modules/mod_proxy_connect.so proxy_connect_module #LoadModule

  Proxy_ftp_module modules/mod_proxy_ftp.so #LoadModule

  Modules/mod_proxy_http.so proxy_http_module #LoadModule

  #LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so

  #LoadModule proxy_scgi_module modules/mod_proxy_scgi.so

  #LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so

  #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so

  Proxy_balancer_module modules/mod_proxy_balancer.so #LoadModule

  #LoadModule proxy_express_module modules/mod_proxy_express.so

  #LoadModule session_module modules/mod_session.so

  #LoadModule session_cookie_module modules/mod_session_cookie.so

  #LoadModule session_dbd_module modules/mod_session_dbd.so

  #LoadModule slotmem_shm_module modules/mod_slotmem_shm.so

  #LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so

  #LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so

  #LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so

  #LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so

  LoadModule modules/mod_unixd.so unixd_module

  #LoadModule dav_module modules/mod_dav.so

  LoadModule status_module modules/mod_status.so

  LoadModule autoindex_module modules/mod_autoindex.so

  #LoadModule info_module modules/mod_info.so

  #LoadModule cgid_module modules/mod_cgid.so

  #LoadModule dav_fs_module modules/mod_dav_fs.so

  #LoadModule vhost_alias_module modules/mod_vhost_alias.so

  #LoadModule modules/mod_negotiation.so negotiation_module

  LoadModule modules/mod_dir.so dir_module

  #LoadModule actions_module modules/mod_actions.so

  Modules/mod_speling.so speling_module #LoadModule

  #LoadModule userdir_module modules/mod_userdir.so

  LoadModule alias_module modules/mod_alias.so

  #LoadModule rewrite_module modules/mod_rewrite.so

  # Added on 23/09/2015 | -enabling reverse proxy requests for users of WLS12c

  LoadModule modules/mod_wl_24.so weblogic_module

  < IfModule unixd_module >

  #

  # If you want httpd to run as a different user or group, you must run

  # httpd as root initially and it will pass.

  #

  # Group / user: the name (or #number) of the user/group to run httpd as.

  # It is generally advisable to create a dedicated and aggregatable for user

  # httpd, as with most system services are running.

  #

  Demon of the user

  Daemon group

  < / IfModule >

  Server configuration # 'hand '.

  #

  # The directives in this section implement the values used by the 'hand '.

  # Server, which meets all demands that are not managed by a

  definition of # < VirtualHost >.  These values also provide defaults for

  # all < VirtualHost > containers you can set later in the file.

  #

  # All these directives may appear inside containers < VirtualHost >,.

  # in which case the value default parameters will be substituted for the

  virtual host of # being defined.

  #

  #

  # ServerAdmin: Your address, where problems with the server should be

  # e-mail.  This address appears on some generated by the page server, such

  # as error documents.  for example [email protected]

  #

  ServerAdmin [email protected]

  #

  # ServerName gives the name and the port used by the server to identify itself.

  # This can often be determined automatically, but we recommend that you specify

  # explicitly to avoid problems during startup.

  #

  # If your host doesn't have a registered DNS name, enter its IP address here.

  #

  Servername 192.168.1.21

  #

  # Deny access to the whole of the file system of your server. You must

  # explicitly allow access to web content directories in other

  blocks of # < directory > below.

  #

  < directory / >

  AllowOverride none

  Need all refused

  < / Book >

  #

  # Note that, from this point forward you must precisely enable

  features special # to be enabled - so if something doesn't work not as

  # you might expect, make sure that you have specifically enabled it

  # below.

  #

  #

  # DocumentRoot: The directory you are going to use your

  documents #. By default, all requests are taken from this directory, but

  aliases and symlinks # can be used to point to other locations.

  #

  DocumentRoot "/ usr/local/apache2/htdocs.

  < directory "/ usr/local/apache2/htdocs" >

  #

  # Possible values for the Options directive are "None", "All."

  # or any combination of:

  # Indexes includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews

  #

  # Note that "MultiViews" must be named * explicitly *-'all Options '.

  # is not give it to you.

  #

  # The Options directive is complex and important.  Please see

      # http://httpd.Apache.org/docs/2.4/mod/core.HTML#options

  # For more information.

  #

  Options Indexes FollowSymLinks

  #

  # AllowOverride controls what directives may be placed in .htaccess files.

  # It can be 'All', 'None', or any combination of key words:

  # AllowOverride FileInfo AuthConfig Limit

  #

  AllowOverride None

  #

  # Controls who can get stuff from this server.

  #

  Need of all granted

  < / Book >

  #

  # DirectoryIndex: sets the file Apache will serve if a directory

  # is requested.

  #

  < IfModule dir_module >

  DirectoryIndex index.html

  < / IfModule >

  #

  # The following lines prevent the .htaccess and .htpasswd files to be

  # seen by customers of the Web.

  #

  < files ".ht *" >

  Need all refused

  < / files >

  #

  # ErrorLog: The location of the error log file.

  # If you do not specify an ErrorLog directive in a < VirtualHost >

  # container, error messages related to this virtual host will be

  # logged here.  If you * define an error for a < VirtualHost > log file

  container of #, that host errors will be logged there and not here.

  #

  ErrorLog "logs/error_log".

  #

  # LogLevel: Control the number of messages in the error_log.

  # Possible values include: debug, info, notice, warn, error, crit,.

  # emerg, alert.

  #

  LogLevel debug

  < IfModule log_config_module >

  #

  # The following directives define some nicknames format for use with

  # a directive CustomLog (see below).

  #

  "LogFormat '%%u %t \"%r\ hour' % > s \"%{Referer}i\ %b" \"%{User-Agent}i\" "handset"

  "LogFormat '%%u %t \"%r\ hour' % > s %b "commune

  < IfModule logio_module >

  # You must enable mod_logio.c use %I and frequency

  "" LogFormat '%%u %t \"%r\ hour' % > s %b \"%{Referer}i\ "\"%{User-Agent}i\ "%I %o "combinedio

  < / IfModule >

  #

  # The location and format of the access (Common Log Format) log file.

  # If you do not have any logfiles access set in a < VirtualHost >

  container of #, they will be saved here.  On the other hand, if you * do *.

  # define per - < VirtualHost > access logfiles, transactions will be

  # logged there and * not * in this file.

  #

  CustomLog "logs/access_log" common

  #

  # If you prefer a log file of access, agent, and referer information

  # (Combined logfile format) you can use the following directive.

  #

  #CustomLog "logs/access_log" combined

  < / IfModule >

  < IfModule alias_module >

  #

  # Redirect: Allows to tell clients the documents used for

  # exist in your server's namespace, but no more. The customer

  # make a new request for the document at its new location.

  # Example:

  # Redirect permanent/foo http://www.example.com/bar

  #

  # Alias: Maps web paths into paths of file system and is used to

  # access content that don't live under the DocumentRoot directive.

  # Example:

  # Alias /webpath/full/filesystem/path

  #

  # If you include a trailing / on /webpath, then the server will be

  # require that he be present in the URL.  It is also likely that

  # duty provide a < Directory > section to allow access to

  # the path to the file system.

  #

  # ScriptAlias: This controls which directories contain server scripts.

  # ScriptAliases are essentially the same as assumed names, except that

  # documents in the target directory are treated as applications and

  # executed by the server on demand, rather than as documents sent to the

  client of #.  The same regulation on flight "/" applies to the ScriptAlias

  # as for the Alias directives.

  #

  ScriptAlias/cgi-bin / "/ usr/local/apache2/cgi-bin /".

  < / IfModule >

  < IfModule cgid_module >

  #

  # ScriptSock: On threaded servers, refers to the access path to the UNIX

  decision # used to communicate with the CGI mod_cgid daemon.

  #

  #Scriptsock cgisock

  < / IfModule >

  #

  # "/ usr/local/apache2/cgi-bin" just need to replace your ScriptAlias

  # CGI directory exists, if you have set up.

  #

  < directory "/ usr/local/apache2/cgi-bin" >

  AllowOverride None

  None of the options

  Need of all granted

  < / Book >

  < IfModule mime_module >

  #

  # TypesConfig points to the file containing the list of mappings from

  # MIME file extension - type.

  #

  TypesConfig conf/mime.types

  #

  # AddType allows you to add or replace the MIME configuration

  # the file specified in TypesConfig for specific file types.

  #

  #AddType application/x-gzip .tgz

  #

  # AddEncoding allows you to have certain browsers uncompress

  # information on the fly. Note: Not all browsers support this.

  #

  #AddEncoding x-compress. Z

  #AddEncoding x-gzip .gz .tgz

  #

  # If the AddEncoding directives above are commented out, then you

  # should probably define these extensions to indicate media types:

  #

  AddType application/x-compress. Z

  AddType application/x-gzip .gz .tgz

  #

  # AddHandler allows you to map certain "manipulators": file extensions

  # No actions associated with the file type. It can be either integrated into the server

  # or added to the directive of the Action (see below)

  #

  # To use CGI outside of ScriptAlias directories scripts:

  # (You will also need to add "ExecCGI" to the "Options" directive.)

  #

  #AddHandler cgi-script .cgi

  # For maps of type (negotiated resources):

  #AddHandler type-plan of the var

  #

  # Filters allow you to process content before sending it to the client.

  #

  # To parse .shtml for server-side includes (SSI) files:

  # (You will also need to add "Includes" the "Options" directive.)

  #

  #AddType text/html .shtml

  #AddOutputFilter INCLUDES .shtml

  < / IfModule >

  #

  # The mod_mime_magic module allows the server to use various boards of the

  content of the file itself to determine its type.  The MIMEMagicFile

  # directive tells the module where the definitions of suspicion.

  #

  #MIMEMagicFile conf/magic

  #

  # Customizable error responses come in three flavors:

  ((# 1) text 2) local redirects 3) external redirects

  #

  # Examples:

  #Error Document 500 "The server made a boo boo".

  #Error Document 404 Missing.html

  #Error Document 404 "/cgi-bin/missing_handler.pl"

  #Errordocument 402 http://www.example.com/subscription_info.html

  #

  #

  # MaxRanges: Number of channels in a Maximum request before

  # return the resource, or one of the extraordinary

  # values 'default', 'none' or 'unlimited '.

  # Default is to accept 200 beaches.

  Unlimited #MaxRanges

  #

  # EnableMMAP and EnableSendfile: on systems that support.

  projection in memory # or the sendfile syscall can be used to deliver

  # files.  Usually, this improves the performance of the server, but must

  # turn off when mounted network is served

  # file systems or if support for these functions is also

  # broken on your system.

  # Default: EnableMMAP, EnableSendfile Off

  #

  #EnableMMAP off

  #EnableSendfile on

  # Additional configuration

  #

  # The configuration files in the conf/extra/directory can be

  # included to add additional features or change the default configuration

  # the server, or you can simply copy their content here and change as

  # necessary.

  # Server-pool management (MPM specific)

  #Include conf/extra/httpd-mpm.conf

  # Multilingual error messages

  #Include conf/extra/httpd-multilang-errordoc.conf

  # Entries to the fancy directory

  #Include conf/extra/httpd-autoindex.conf

  # Language settings

  #Include conf/extra/httpd-languages.conf

  # User directories

  #Include conf/extra/httpd-userdir.conf

  # Info in real time on the applications and configuration

  #Include conf/extra/httpd-info.conf

  # Virtual hosts

  #Include conf/extra/httpd-vhosts.conf

  # Local access to the manual for the Apache HTTP Server

  #Include conf/extra/httpd-manual.conf

  # Distributed authoring and versioning (WebDAV)

  #Include conf/extra/httpd-dav.conf

  # Various default settings

  #Include conf/extra/httpd-default.conf

  # Configure mod_proxy_html to understand HTML4/XHTML1

  < IfModule proxy_html_module >

  Include the conf/extra/proxy-html.conf

  < / IfModule >

  # Secure connections (SSL/TLS)

  #Include conf/extra/httpd-ssl.conf

  #

  # Note: The following text should be present to support

  # start without SSL on platforms without equivalent/dev/random

  but # a statically compiled in mod_ssl.

  #

  < IfModule ssl_module >

  SSLRandomSeed startup builtin

  SSLRandomSeed connect builtin

  < / IfModule >

  #

  # Uncomment on the below to deal with user agents that deliberately

  # violate open standards by abusing DNT (DNT * must * be a specific)

  choice of end-users #)

  #

  # < IfModule setenvif_module >

  #BrowserMatch "MSIE 10.0"; bad_DNT

  # < / IfModule >

  # < IfModule headers_module >

  #RequestHeader unset DNT env = bad_DNT

  # < / IfModule >

  #= WLS 12 c routing Configuration. Seven 2015 =.

  # Added to fix the mistakes of transport of myAST resulting from the use of deprecated SSL 2.0 Mobile Security.

  # The following has been added to activate the reverse proxy requests from users of WLS 12 c-based applications.

  #-8002 port = SSL listener for api.astcorporation.com (managed server)

  # - the port 443 = SSL listener for myast.astcorporation.com (managed server)

  #

  # Phases of deployment:

  API.astcorporation.com:8001/myast # (1).

  # VirtualHost (2) Setup / WeblogicCluster guidelines to register myast.astcorporation.com:443

  # 3-test api & myast

  # 4-regenerate private certificate + all certificates.

  # Minimum nonclustered directive specifies WebLogic IP + port.

  < IfModule mod_weblogic.c >

  WebLogicHost 192.168.1.43

  WebLogicPort 8002

  Debugging now

  DebugConfigInfo WE

  Newspapers/myAst12c_WLS_error_log WLLogFile

  WLS-JSESSION-ID WLCookieName

  < / IfModule >

  # Proxy request per path Note: SetHandler specifies the handler for the plug-in module for the Apache HTTP Server

  < /myast location >

  SetHandler weblogic-Manager

  ErrorPage http://www.astcorporation.com/services/middleware/Middleware_Services.html

  < / location >

  # Added proxy

  ProxyPreserveHost off

  #ProxyPass /api http://API.astcorporation.com:8001 / myast

  #ProxyPass /myast http://myast.astcorporation.com

  I found my answer after I posted.  I'll leave it here to help others...

  The list of all instances of Apache that were started

  • ' ps - ef | grep apache. "

  Kill the persistent process

  

• MPWS: could not bind to any port

  Hello

  I get this error even when I try to preview or publish in Muse, "MPWS: could not bind to any port.

  There is only one network here so I can't pass this (I have seen that points somewhere a minute ago).

  I was with a colleague today who was working on the same file and it is not happened to him (on another computer).

  Yep, I even tried with a different site file and it's the same thing.

  Should I just a portable doubtful? If someone could please solve this mystery, I would be eternally grateful.
  

  Thanks in advance... and late happy new year
  

  
  
  

  I have the man of the solution, you must allow the read/write permission and access to the network too, you can try this, finally I did it! Thank you

• Photoshop CS6 upgrade does not recognize CS3 Extended as product qualification

  I'm unable to install my Photoshop CS6 upgrade because the upgrade does not recognize a product calling on my system.  Asked about this, I enter my current Photoshop CS3 Extended serial number, but the upgrade does not recognize as valid a series number of an eligible product.  I tried to do a clean install to make sure that no other applications are running or in conflict.  My operating system is Windows XP Media Center Edition 2005, Service Pack 3.  I have an Intel Core 2 Quad CPU @2.66 GHz with 4 GB of RAM.

  SouthCityTim I recommend you to contact our support team so they can validate your upgrade and the serial number.  For the best support, I recommend our chat support at http://adobe.ly/yxj0t6.  Our chat representatives can provide a personalized experience to solve the problem you described.

• HP 6470 b 2nd hard drive upgrade. How fast this port works on? SATA I, II or III

  HP 6470 b 2nd hard drive upgrade. How fast this port works on? SATA I, II or III

  I want to put in a 60 GB SSD into the CD slot and want to see how fast it will support as this will be used for the Cache

  Thank you

  The published information is not explicit; He says only: SATA for the expansion Bay while the main hard drive Bay expressly says SATA-III. However, given that this isn't just an optical drive Bay, but also a general 'Bay expansion', it is safe to assume it of on the same SATA bus as main drive and is a SATA III interface.

  Data sheet

  6470b is also supposed to have a slot for a WSSD mSATA, but he is not described in the Manual:

  Manual

  Obviously the WSSD would work better for cache but you can use a 60 gig SSD in an expansion bay for both cache adapter. Even if the connection is SATA-II, it will be much faster to work for a cache of acceleration.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• IkeReceiverInit, unable to bind to port

  IkeReceiverInit, unable to bind to port

  I can't activate IKE v1 on the external interface

  How can I fix it?

  This ip address should not use these ports. You can try the following

  1 clear local-host x.x.x.x

  2. Remove and re apply the nat statement which is the cause

  Kind regards

• How to install lightroom to a new laptop that does not have a port lightroom... but CD is a cd.

  I'm upgrading to a new laptop that does not have a port of cd... BUT my lightroom 5 autonomous is a cd. What is the fastest way to install it? Y at - it a link to the stand-alone lightoom can I download online then enter my product key after installation? I don't think that the link to download CC LR works for semi-bas must be autonomous.

  Thank you.

  You can download the standalone version from here:

  Updates

  Run the Setup and use your existing Lightroom 5 serial number. This serial number has 24 numbers, the first four are 1160.