IkeReceiverInit, unable to bind to port

Similar Questions

• Cannot bind Syslog port FM5.07...

  Dear all,

  We have Fabric Manager 5.07 installed on Windows Server 2008. Everything works fine without this little problem:

  Whenever I start FM I get this error message:

  Standalone FM was unable to bind to the port of Syslog, as it was already in use, this may mean that another instance of the application is already running.

  But there is no other instance running and since now I was not able to overcome this problem...

  Does anyone have an idea how to solve this problem? Which ports to check where I can configure which ports FM will use to syslog?

  Best regards

  Werner

  Hi Werner,.

  SYSLOG is 514 UDP port.  Normally, this means that another program is running and using the port 514.

  Some TFTP servers are also the SYSLOG servers and 'listens' on this port.

  You can see if port 514 look with Fabric Manager does not.

  To find out what is using port 514:

  b. open a command prompt window.  Start / Run type: cmd

  (b) from the command prompt type: netstat - ano

  (c) note the PID (process identifier) with the ports that you care about.  (Note also the local address, the address abroad, the Protocol and the State).

  (d) then do ctrl-alt-del to bring up Windows Task Manager.

  (e) in the Windows Task Manager, select the processes tab.

  (f), find the PID you noticed when you did the netstat in step (c).  Look left for the name of the image and that tells you what process has that PID.

  -If you do not have a PID column, click view / select columns.  Make sure PID is selected.  Click OK.

  -Of course show processes from all users is selected.

  Now you can see which process is using port 514.  FM would be qualified bird javaw.exe (java exec without a console window).

  Best regards

  Jim

• FMS 3.5 upgrades is not binding to ports 80, 1935

  I installed and ran FMS Development Server 3.5 on my Fedora 15 x 32 for a long time now. Everything works fine. However, recently I discovered on the updates to the server. So I downloaded all the (3.5.2 - 3.5.7)... the latest version I have is 3.5.1... and it works very well. Installation of the new version on the server upgrade works great... and when from the server doesn't give any errors.

  It is said in/var/log/messages:

  Server from...

  Server started (/ opt/adobe/fms/conf/Server.xml).

  However, don't check my IP address binding, it shows no connection to ports 80 and 1935. The server administrator runs successfully because I can see binding to port 1111.

  Whenever I run my test application I used to run correctly on FMS 3.5.1 I can't get a connection.

  So I was wondering whats wrong... why it is not more binding? is there something wrong with my upgrade process? I tried to uninstall some currenltly I have and install the new update... same result.

  I need updates because they contain bug fixes I need to have on my server.

  Thank you

  Thank you vibsgupta for pointing out the PROXY thing... I shouldn't have filled the PROXY value.

  However, this is not the real reason for my problem. The ports are not binding and FMS is not working properly because I use Fedora. Once I switched to CentOS, everything worked like charm out of the box.

  Thank you

• WARNING: Unable to bind to the property

  I'm stuck trying to reduce a problem that causes a "unable to bind to property' warning. Execution of this code (debug mode) in Flex Builder 2.0.1 generates the following output in the console window:
  
  WARNING: cannot bind to property 'label' class 'XML' (class is not an IEventDispatcher)
  WARNING: cannot bind to property 'label' class 'XML' (class is not an IEventDispatcher)
  
  Any help would be greatly appreciated!
  
  <? XML version = "1.0" encoding = "utf-8"? >
  "< mx:Application xmlns:mx = ' http://www.adobe.com/2006/mxml" > "
  < mx:XML id = 'elements' xmlns = "" >
  elements <>
  < item label = "label1" / >
  < item label = "label2" / >
  < / object >
  < / mx:XML >
  < mx:VBox >
  < mx:Repeater id = dataProvider = "{items.item"rp"}" >
  < mx:Label text = "{(rp.currentItem as XML) .@label}" / >
  < / mx:Repeater >
  < / mx:VBox >
  < / mx:Application >

  Data binding works because it uses events. When you put [Bindable] before a variable, the Flex compiler generates code that looks at this variable and each modification, use dispatchEvent to send a notification. Whenever you use {} as a binding expression the Flex compiler generates a code that listens to events and changes the destination (this thing using {}) to the new value.

  You get the message says that the XML class does not implement the IEventDispatcher class, which means that there is no event distributed whenever a property of the XML changes. We cannot put links and events on everything because it would really slow down the application - can you imagine every time you have used a loop that an event was sent when the loop control variable has changed?

  So what is the solution? In this, there is not a way easy and good to eliminate the problem. And it isn't really a problem here because your XML is static and will not change. If you were going to use the XML dynamically you would probably read by some data services, and then you shouldn't have the problem.

  Now, let's say you have your own class:

  public class {MyData
  public var a: String;
  public var b:Number;
  }

  And then you want to use:

  [Bindable] public var test: MyData;
  ...
  

  You will get the warning, 'data binding will not be able to detect changes made to one' - why is this? Well, your MyData class does not all events when the public variable is changed. So if at some point you do: test.a = 'Hello' label will not display the new value.

  The quick fix for this is to place the [Bindable] before the declaration of class from MyData:

  [Bindable]
  public class MyData {...

  This will make the Flex compiler change your class to implement IEventDispatcher and generate code to send events if all variables are changed.

  Hope it clears.

• QUdpSocket is not binding to port 1900

  I'm working on a program that needs to listen on udp port 1900 to boradcast multicast and the discovery of a component in a network ( SSDP enables discovery of UPnP devices).  The code is already done and works perfectly on my Alpha BB10Dev, but when I try to run it on the limited edition of BB Z10 I get error (the related address is already in use).

  BB10 OS Alpha Version 10.9.10.35

  BB Z10 OS Version 10.0.9.2372

  This port is no longer available for the production of operating system? or there's a problem with the Version of the OS on my Z10?  I did not upgrade my Z10 to SOMETHING more recent.

  any suggestion?

  Problem found, the MediaSharing Services of blackberry bind to 1900 and do not share the port.  To link to the port, you must disable the MediaSharing service on the settings and it works immediately.

• Skype connection error; error: unable to bind and try again

  Why Skype account not bind it continues by saying that he was unable to put a link and try again. Passwords and e-mail addresses are correct. It is just to be a pain. Is there a work around? Can I ignore this request to bind and just continue to use Skype?

  It would be best if you contacted Skype support team regarding this issue.

  They are experts in the field of your request and would be in a better position to answer your concerns. You can contact them through this link:
  

  
  

  You can also join the community of users here:

  
  

  How can I contact Customer support https://support.skype.com/en/faq/FA1170/how-can-i-contact-skype-customer-service?intcmp=SN-Mods

  
  

  
  

• Unable to block the port with pfctl(8)

  I try to block the process that is listening on the port on my MacBook Pro 9110 to simulate the network interruption.

  If I have the following rule:

  -------------------------------------------------------------------

  block fast drop on all proto tcp from any to any port = 9110

  --------------------------------------------------------------------

  My second process has communicated successfully with the port is blocked, and the client has successfully sent applications to the blocked process. The best I could achieve blocks all communications process with these lists of rules:

  ---------------------

  drop block in all

  block any waiver

  ---------------------

  However, this is exactly what I need. Am I missing something? Any commnets/suggestion will be appreciated. Here is my result of lsof command:

  > > lsof-i | grep 9110

  Java 41243 yfe 132u IPv6 0x1e7d5327e0e36555 0 t 0 TCP 192.168.1.68:58772-> 192.168.1.68:9110 (ESTABLISHED)

  Java 41243 yfe 145u IPv6 0x1e7d5327e0f43035 0 t 0 TCP 192.168.1.68:58777-> 192.168.1.68:9110 (ESTABLISHED)

  Java 41244 yfe 133u IPv6 0x1e7d5327e116eab5 0 t 0 TCP 192.168.1.68:58747-> 192.168.1.68:9110 (ESTABLISHED)

  Java 41244 yfe 147u IPv6 0x1e7d5327e0e3a075 0 t 0 TCP 192.168.1.68:58756-> 192.168.1.68:9110 (ESTABLISHED)

  yfe Java 41253 201u IPv6 0x1e7d5327e0e38595 0 t 0 TCP *: 9110 (LISTEN)

  Java 41253 yfe 278u IPv6 0x1e7d5327e0e39055 0 t 0 TCP 192.168.1.68:9110-> 192.168.1.68:58747 (ESTABLISHED)

  Java 41253 yfe 279u IPv6 0x1e7d5327e4a195b5 0 t 0 TCP 192.168.1.68:9110-> 192.168.1.68:58756 (ESTABLISHED)

  Java 41253 yfe 280us IPv6 0x1e7d5327e5560035 0 t 0 TCP 192.168.1.68:9110-> 192.168.1.68:58772 (ESTABLISHED)

  View the results of the next PF sanity check:

  % sudo pfctl(8) - v - n f /etc/pf.conf

• Unable to get the port forwarding on LRT224

  Hello

  Can anyone help with setting the port forwarding on a LRT224 - he drives me crazy!

  I have a mail server running on the internal network listening on port 443 using SSL. I want to expose it to the internet on port 450

  I tried to configure the following Port Address Translation entries:

  TCP: 450 an external Port internal Port: 443 host LAN:

  UDP: 450 an external Port internal Port: 443 host LAN:

  The two rules are enabled.

  I have not setup additional access rules, since I realized that the Port Address Translation is circumventing them.

  The setting "Block WAN request" on the firewall is disabled.

  Result - NOTHING! No link, no ports open (verified with ShieldsUp!)

  FYI - the LRT224 was purchased to replace 2 DD-WRT-flashed routers, each connected to a different ISP - 1 want to automate failover rather that physically Exchange connections of my passage to the routers.

  On the other hand, the requirement for transmission of port above took 5 minutes to the configuration via DD - WRT and worked as required from the beginning.

  I spent 2 days playing with the LRT224 and have no configuration work.

  It is a basic feature! Why is it so hard to make it work?

  All help gratefully received...

  Hi Chad,

  Just to say thank you to help get that job!

  To confirm, the resolution for anyone interested:

  The configuration of Port Address Translation was correct, but the internal server that was targeted had bad default gateway on its network card (it was targeting my other router), which meant that he was not talking to the LRT224, which means that the latter did not open the ports connected to the Internet.

• Unable to opena a port through Windows Firewall in Windows 7 Home Premium

  Original title: opening a port on Windows 7 Home Premium

  Each answer to this question does not apply to my pc because of this: when I open the Panel it is not a Security tab, but there is a tab to go directly to the firewall, and there is no button in the firewall to add a port.

  Any help would be massively appreciated, thanks :)

  Hello

  According to the description, I understand that you are not able to open a port in Windows 7 Home premium.

  Please follow the steps below to check if his help.

  1. Open Windows Firewall by clicking the Start button, click on the Control Panel, clicking Security, and then click Windows Firewall.

  2. On the left, click on advanced settings.

  3. On the left, click inbound rules. Then, on the right, under Actions, click the link of the new rule.

  4. Select the Port marked option and click Next.

  5. In the specific local Ports box, type the ports that you want to open, separated by commas, and then click Next. (For example, in this case, the TCP ports must be open are 418, 419, 420 and 421.) The wizard takes measures and open ports to receive data.)

  6. Select allow the connection, and click Next.

  7. Check the boxes for private or any other type of desired network and then click Next.

  8. Type a name (usually the name of any program to open). Click Finish.

  Hope this information is useful, if the problem persists please write us back with the quick information so that we can help you further.

• Create PRN files for use with the software E-Tran. Unable to set the port to a local printer in Windows 7 with WordPerfect.

  As a reporter, I provide digital transcripts safely to my clients.  I have a Kodak printer and all drivers are up to date.  I use WordPerfect 12 for my transcripts.  E - Tran is the software used to process the transcripts.  It requires one. PRN file.  I save my document as a .wpd file.  I click, file, print, and I check the box print to file provided.   This creates the .prn format.

  I then download this file... or I tried all day to do it, in the software E-Tran.   It will NOT work.  The file is empty.  Nothing is there.  I tried to create a local no port in windows for printing of file installation... no good.  Error messages tell me: function page failed.  ???  Help!

  Hello

  I suggest you to convert wpd (WordPerfect) format .prn file before trying to download it.

  If the problem is not resolved, I suggest you to contact WordPerfect or the manufacturer of the software e-Tran for assistance.

  http://www.Corel.com/Corel/pages/index.jsp?PgId=800085

• Unable to connect to port 80 on the web server on host Ubuntu guest

  I have a very strange problem. I've been running a VM of 14.04 Ubuntu on my MBP under VMware Fusion for some time. I have re-installed Yosemite during the weekend for a clean installation trying to solve some of the problems I had. I now have my Ubuntu VM up and running. All right, except that I can't hit the web server on the virtual machine.

  I can access the virtual machine in a variety of different ways!

  • Ping: I can ping
  • SSH: I can ssh in
  • psql: I can connect to the database remotely via port 5432
  • NFS: can I get the files of the virtual machine files on my hard drive
  • Tomcat: I can access my web application directly through Tomcat on port 8080

  When I do a scan of port of the virtual machine, I get this:

  Port scan started...

  Host port scan: 10.39.186.13

  Open TCP Port: 22 ssh

  Open TCP Port: 111 sunrpc

  Open TCP Port: 389 ldap

  Open TCP Port: 2049 nfsd

  Open TCP Port: 5001 commplex-link

  Open TCP Port: 5432 postgresql

  Open TCP Port: 8000 irdmi

  Open TCP Port: 8080 http-alt

  Open TCP Port: 8104

  Open TCP Port: 37805

  Open TCP Port: 41301

  Open TCP Port: 42060

  Open TCP Port: 55224

  Open TCP Port: 60974

  Port scan has completed...

  Port 80 is not even there. The virtual machine itself, I can access the site via port 80:

  wget xnat@xnatdev:~$ http://xnatdev.wurstworks.com

  -2015-06-22 11:20:50- http://xnatdev.wurstworks.com/

  Resolution xnatdev.wurstworks.com (xnatdev.wurstworks.com)... 127.0.0.1

  Connection to xnatdev.wurstworks.com (xnatdev.wurstworks.com) | 127.0.0.1 |: 80... connected.

  Query HTTP sent, awaiting response... 302 Found

  Location: http://xnatdev.wurstworks.com/app/template/login.VM;JSESSIONID=18A2C3A7C7AB6A63F39F7AC49E54FCD4 [next]

  -2015-06-22 11:20:50- http://xnatdev.wurstworks.com/app/template/login.VM;JSESSIONID=18A2C3A7C7AB6A63F39F7AC49E54FCD4

  Reuse an existing connection to xnatdev.wurstworks.com:80.

  Query HTTP sent, awaiting response... 200 OK

  Length: unspecified [text/html]

  Record on: 'index.html '.

  [ <=>                                                                                         ] 12,818      --.-K/s   in 0.001s

  2015-06-22 11:20:50 (11.2 MB/s) - 'index.html' saved [12818]

  But the host OS, I get this:

  wget rherrick@Aerys:~$ http://xnatdev.wurstworks.com

  -2015-06-22 11:21:50- http://xnatdev.wurstworks.com/

  Resolving xnatdev.wurstworks.com... 10.39.186.13

  Connection to xnatdev.wurstworks.com | 10.39.186.13 |: 80... has failed: connection refused.

  I tried switching between NAT and open networking (I know that I had to work with NAT before, but I'm willing to try anything at this point).

  I'm on OS X 10.10.3 and the most recent, and VMware Fusion 7.1.2. Any ideas on how to get this working would be greatly appreciated!

  OK, got it market. The issue was the listen directive in configuring nginx for connecting Tomcat. I'd put it domain name FULL and port 80 on the server, but something I did is the determination of the FULL domain to 127.0.0.1 instead of the IP DHCP-published name. If this does not work because the incoming request has been the full domain name of host configured in my/etc/hosts, OS, then nginx not pair together configuring nginx for the domain since listening has been screwed up.

• Game-VMGuestNetworkInterface - unable to Bind

  When I try all-VMGuestNetworkInterface, I get an error:

  Game-VMGuestNetworkInterface: cannot bind parameter 'VmGuestNetworkInterface '. Cannot convert the ' @{VM = FITCCEM; ". IP = 10.200.16.80; SubnetMask = 255.255.255.

  0; Passerelle_par_defaut = 10.200.16.1; DNS = System.String []}"value of type"Selected.VMware.VimAutomation.ViCore.Impl.V1.VMGuestNetworkInterfaceImpl"type"VM ".

  Ware. VimAutomation.ViCore.Types.V1.VM.Guest.VMGuestNetworkInterface ".

  H:\scripts\Today.ps1:103 tank: 82

  + {Set-VMGuestNetworkInterface - VMGuestNetworkInterface < < < < $GuestInterface - DNS $ComPriDNS, $ComSecDNS}

  + CategoryInfo: InvalidArgument: (:)) [game-VMGuestNetworkInterface], ParameterBindingException)

  + FullyQualifiedErrorId: CannotConvertArgumentNoMessage, VMware.VimAutomation.ViCore.Cmdlets.Commands.SetVmGuestNetworkInterface

  Here is my code can someone point me in the right direction?

  $GuestInterface = get-VMGuestNetworkInterface - VM $VM. Name | Select the computer virtual IP, subnet mask, Dns DefaultGateway

  ForEach ($GuestNIC to $GuestInterface)

  {

  Write-Host $GuestNIC.VM

  IF($GuestNIC.IP)

  {

  $IP = $GuestNIC.Ip

  $Gateway = $GuestNIC.DefaultGateway

  $Subnet = $GuestNIC.SubnetMask

  Write-Host "DNS settings".

  $DNS1 = $GuestNIC.DNS [0]

  Write-Host $DNS1

  $DNS2 = $GuestNIC.DNS [1]

  Write-Host $DNS2

  $ComPriDNS = "1.1.16.31".

  $TchPriDNS = "1.1.17.1.

  $ComSecDNS = "1.1.0.31".

  $TchSecDNS = "1.1.1.1".

  Switch ($DNS1)

  {

  '1.1.16.30 '.

  {Set-VMGuestNetworkInterface - VMGuestNetworkInterface $GuestNIC - DNS $ComPriDNS, $ComSecDNS}

  $DNS1 = $ComPriDNS

  $DNS2 = $ComSecDNS

  Write-Host "change DNS".

  }

  '1.1.16.51 '.

  {Set-VMGuestNetworkInterface - VMGuestNetworkInterface $GuestNIC - DNS $ComPriDNS, $ComSecDNS}

  $DNS1 = $ComPriDNS

  $DNS2 = $ComSecDNS

  Write-Host "change DNS".

  }

  '1.1.24.95 '.

  {Set-VMGuestNetworkInterface - VMGuestNetworkInterface $GuestNIC - DNS $ComPriDNS, $ComSecDNS}

  $DNS1 = $ComPriDNS

  $DNS2 = $ComSecDNS

  Write-Host "change DNS".

  }

  Due do after the Get-VMGuestNetworkInterface Select-Object, the object is not an object of VMGuestNetworkInterface more.

  And that's the kind of object that Set-VMGuestNetworkInterface expects the parameter - VMGuestNetworkInterface.

  Remove Select-Object and the script should work

• Cause: java.sql.SQLException: ORA-22295: unable to bind more than 4000 bytes

  Hello
  
  When you use Java/XML to insert, we got an error like:
  
  Cause: java.sql.SQLException: ORA-01461: can bind to a LONG value only for insert into a LONG column
  
  then change column varchar2 (4000) to a long data type.
  
  as:
  truncate table BAM_ACTIVITY
  
  ALTER TABLE BAM_ACTIVITY CHANGE (CONTEXT LONG);
  
  
  then download the new error message like:
  
  Cause: java.sql.SQLException: ORA-22295: impossible to link more LOB data and LONG columns 4000 bytes in 1 statement
  
  
  I think that time limit of data type is only 2 Giga bytes, do we need to change the data type of this column to
  CLOB, which can be as large as 4 GB,
  
  Or an experience to draw from this kind of error?
  
  Thank you very much
  
  Roy
  
  Published by: ROY123 on January 25, 2010 14:26
  
  Published by: ROY123 on January 25, 2010 14:27

  Has LONG been deprecated for a (pardon the pun) a very long time.

  CLOB would be your horse if you need store more than 4000 bytes of information.

  If you need help with that (insert via java), this can provide useful information for you.

  [http://www.oracle.com/technology/sample_code/tech/java/codesnippet/jdbc/clob10g/handlingclobsinoraclejdbc10g.html]

• Newbie question - unable to see the port number in OBIEE presentation Services

  Hello
  
  I installed IIS and then installed 10.1.3.2.2 OBIEE. The installation was successful, and to restart the OC4J was also started successfully. However, when I hover over submission Services on the start menu, I see the url http:/localhost/analytics and when I click on that I can't see the login screen. . I think I should be able to see the url http://localhost:9704 / analytics. How can I solve this problem?
  
  Thank you
  Yasir

  No here is a simple way... no need to work in EM...

  Go to the properties of Présentation Services menu option Oracle Business Intelligence :

  In the Web Document tab, replace the URL... simple as that...

• VISA, unable to contact or see RS232 serial com port

  I have a Dell Optiplex GX260, who had recently for Windows XP (Service Pack 2) re-installed on it.  National Instruments VISA is unable to communicate with port com RS232 serial on the computer.  Control of "VISA Resource Name" in LabVIEW 8.5, or the "measurement and Automation Explorer" can see serial port.  Refreshing the list does not help.  "HyperTerminal" is able of see and communicate with instruments connected to the serial port.  In windows 'Device Manager, the serialport appear in the list of material without any warnings.

  Can someone please help with suggestions on how I may be able to get the VISA in LabVIEW 8.5 to see and communicate with the serial port?

  System details:

  Dell Optiplex GX260 (One RS232 serial port)

  Windows XP Edition Family Service Pack 2

  LabVIEW 8.5

  I had this happen to me once. In my case, I've updated to the latest version of VISA that corrects the problem.