FMS can co-exist with an IIS web server?
HelloI searched posts and do not see someone else with the problem of sharing port 80 with the basic website services. Maybe nobody tries to run IIS and FMS at the same time?
I installed 3.5 accepting the values by default and does not install Apache for it because I use web sites on my Windows Server 2003 by using IIS.
After the installation of FMS, I was able to open the administration space and view video samples locally so that it resembled a successful installation. But none of my sites were served on a more thorough review, upward.
I expect a conflict with the port 80 and IIS wanting him as FMS server who want the same port.
Is it possible to have a server continue to use IIS to serve web pages and also have FMS on the same server, use Flash streaming?
At this time I use the development version (no license yet) of 3.5 to set up examples of what improvements can be made with the FMS. After getting customers interested and help ready to compensate the price then move to release an instance under license. But if she needs it's own server, which is not in the budget right now.
Therefore, it is possible to run both on the same server (IIS web server) and FMS?
Thanks in advance to all those he has managed this condition and can provide more detailed information.
Yes, FMS, and IIS can coexist on the same server.
1. you need two IP addresses, one for FMS and one for IIS
2. you will need to bind FMS to one of the IP addresses in fms.ini. FMS binds to all default IP addresses.
3. you must link your IIS virtual servers to another IP address (IIS binds to all IP by default)
4. If you use IIS version 6, you must use httpcfg.exe to disable socket pool on IIS (search the microsoft KB... There is an article about this somewhere). If you do not, your IIS virtual servers will ignore the settings in the Internet Information services manager and continue to bind to all IP addresses.
Tags: Adobe Media Server
Similar Questions
-
Windows Defender in vista Ultimate edition 64-bit can co-exist with anti-virus software
Windows Defender in vista Ultimate edition 64-bit can co-exist with anti-virus like AVG 2011 and firewall, Avg & windows software?
In fact, recommended in this case?
AVG for disable Windows Defender.
-
Problem with URL localhost Web Server page
I can not open my Web server via the browser page, but he had a different address when I click it?
When I click on it it gives me:
file:///applications/XAMPP/xamppfiles/htdocs/mytestwebsite%20/index.htm
If I want to open it, it should be sufficient to write:
localhost/mytestwebserver/index.htm
or should I write more about after "localhost".
Thank you
You named your file mytestwebsite with space at the end which turns into URI mytestwebsite % 20. You must delete the space between the name of the folder or try to use localhost/mytestwebserver%20/index.htm or create the virtual host.
-
vSphere 5 and local IIS Web server
Hi all
Sorry for my English, I'm Italian and I'm new to this community, but I have a problem with my vsphere 5.
I created a host with vsphere 5, inside of this host, I have 1 Small Business Server 2011 Microsoft VM and 2 virtual machines Windows 7 Professional.
Infrastructure is:
1 Fritzbox router attached to an hp proliant server.
Inside of the server I have 5 and within esx esx vmware, I have 3 virtual machines
Now, I have installed a local Web server in 1 virtual machine with Windows 7 Professional and IIS 7
I have a static IP and I have configured the router to forward traffic from the static ip address to my internal LAN to a specific IP (the ip of my local web server)
I open in my router port 80 for web traffic and open port 80 also in my firewall windows 7, but when I try to join my vm from the outside, the local web server virtual machine does not work. Is there any configuration, I need firewall configuration ESX?
Thanks a lot for the replies
Valentina Bombelli
To the internet:
Telnet
80 using a Windows command prompt. It seems that you do not specify a port 80, as it is said "... port 23, failed connection. / Rubeck
-
Acrobat Reader can co-exist with Acrobat Pro
I have Acrobat Pro XI installed. I need to test forms with Acrobat Reader. In versions, previous two products could not co-exist; install one would remove the other. Now, I've read that they can coexist. Y at - there no procedure for the installation of Acrobat Reader which ensures she will not erase Acrobat Pro?
You can certainly install Acrobat Pro and drive at the same time on the same machine.
Try to do the same thing on your side and let me know what exact issue you are facing.
Kind regards
Ana Maria
-
CS2 Video Collection can co-exist with CS4 Master Collection?
I have CS2 Video Collection, as well as Macromedia Dreamweaver MX 2004, Flash 8 Pro and the extensions Manager (these 3 are not part of the CS2).
Also, I have the CS4 Master Collection but had held off using it until I built a capable PC. I would like to install both so I can learn how to use the CS4, but must keep the CS2 (and Macromedia applications) because I absolutely need to use these for my business. Plan is to get comfortable with CS4 and then discontinue use and uninstall CS2 and Macromedia applications altogether.
Video collection CS2 has AE 6.5, Premiere Pro 1.5.1 Audition 1.5, Encore DVD 1.5, ImageReady CS2, Photoshop CS2, bridge and help center
Then, there are 2 applications Macromedia (before Adobe them redeemed), and is of course Adobe extensions Manager
CS4 Master Collection has of course ALL these (and more)
Windows XP Pro SP3, 4 GB ram, 1 TB of HD space, Intel Core 2 Quad CPU, Nvidea GeForce GTX480
1 CS4 should have no problem opening the files of CS2. The other way around you would need to ask in the Flash / PP. forums
2. Yes. After installing CS4 these files will open in CS4 with a double click from the Explorer.
Bob
-
My system resources were used to the top by MsMPEng.exe when investigating, looked that Windows Defender was the problem. Installed MS Security Essentials seems to have solved the problem.
For those who are on the cable of the Charter as an ISP provider, F-Secure will suck all your cpu cycles to the top
If you use Microsoft Security Essentials, there is no need to use Windows Defender. You can disable that and just let Microsoft Security Essentials run things. Microsoft® Security MVP, 2004-2009
-
Proxy 11 g OAM with the Apache Web server
OAM - 11.1.1.5
Login page custom external action to the OAM Server presentation (hostname: port/oam/Server/auth_cred_submit) works perfectly. The same external custom login page by OAM url of proxy (proxy, oam, server, auth_cred_submit server) fails with
OAM-02073: error checking if the resource is protected or not.
Cause: The symbolic analysis of TPE has failed.
Found newspapers: -.
[oracle.oam.binding] [tid: [ASSETS].] [ExecuteThread: '1' for the queue: "(self-adjusting) weblogic.kernel.Default"] [userId: < anonymous >] [ecid: 8018442489f91c72:-19fbdf9:1370a7d3332 :-8000-0000000000001394,0] [SRC_CLASS: oracle.security.am.pbl.protocol.plugin.oam.AMHelper] [APP: oam_server] [SRC_METHOD: getAMRequestToken] Transport request Token: null
Also scan newspaper it seems in the Return header variable: Cookie = OAM_REQ = Version... is missing.You must submit the OAM_REQ of the custom shape, see please Note 1281026.1 for more details.
Kind regards
Colin -
A web site with the IIS configuration network location
Is there information on how to set up a web site to a network location. I have a shared directory of Mac that I have access to my Windows Vista pc. I have a Server IIS Web on this PC and want to test the Mac files with the IIS Web server on the Windows computer. I created a site in IIS and pointed on the shared drive, this resulted in an error: cannot read the web.config configuration file. I tried a different approach: create a local site to wwwroot, then create a virtual directory. This brought the same error: the requested page cannot be accessed because the configuration data of the page are invalid. I have IIS 7 on Windows Vista Business Edition.
Hello
Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the forums of IIS. Please post your question in the following link for assistance:
Link to the forum:
-
CF 11 Enterprise install App Server and IIS 8.5 on Web server (different material)
Hi all.
Facing a problem of configuration to set up here. We have the application inside the firewall server and we will have on the DMZ Web server and this web server has to forward the requests to the server see
I installed cfusion instance HTTP Port 8500 remote Port 8010 host is a local host, with no cluster. We will have other forums as a result of a port in addition to HTTP and distance on the line.
So now the question is how to run the connector. If I run the embedded {cfroot}/cfusion/runtime/bin/wsconfig.exe, it shows localhost as server applications, well, the web server must be IIS, but on another IP address NOT this server, so that the OK button remains grey.
You would think that you would need to run the connector on the Web server, right? Well, I do not have CF installed on it, nor do I intend install on my web server, so how do I get on the Web server connector.
I read a post on taking a wsconfig.jar and pulling the DLL and others, but it is with JRun 8 CF, CF 11 and not IIS 8.5. Maybe it's the method that I need to follow, but seems to be the new land that has never been displayed in the CF community. I like to think I'm 'special' but really? I'm the first to have this set up the configuration, and no one has posted a BLOG about it. Looks strange OR I'm totally missing something.
Please let me know any suggestions on how to move forward.
Running on window server 2012 R2 for CF Application Server and the Web server. CF 11 E update 3.
ColdFusion 11 environment distributed for connector with all sites:
1. install ColdFusion11 on the other server.
2. Once you install CF11, then copy the jar file "wsconfig.jar" from this location C:\ColdFusion11\cfusion\runtime\lib on the IIS server.
3. configure IIS in the other server. You need to enable the following features at the IIS level only.
ISAPI extensions
ISAPI filters
CGI
ASP .NET
5 ColdFusion11 server to connect to the Web server via the Port connector, which is located in the server.xml file. You can find this file in the C:\ColdFusion11\cfusion\runtime\conf, once you open the file server.xml, this is the port that you want.
Example: -.
6. Once you check everything in ColdFusion server, then return to the IIS Web server computer.
7. the wsconfig.jar file which you copied in this server, rename the .jar to .zip file extension an excerpt it.
[8. create a file with the same structure here magic C:\ColdFusion11\config\wsconfig\{Magic_Number}--[nombre would be 1, 2, 3... n]
{9. now go to the extracted folder wsconfig and check this isapi_redirect.dll, copy the DLL to the folder C:\ColdFusion11\config\wsconfig\{Magic_Number}. If you have 32-bit 32-bit copy if you have 64-bit DLL and then copy 64 bit DLL.
Location of the DLL in the extracted folder
The 64-bit IIS DLL is located in connector\isapi\intel-win64\prebuilt\amd64\isapi_redirect.dll
The 32-bit IIS DLL is in connector\isapi\intel-win\prebuilt\isapi_redirect.dll
10. in the same folder of magic_number create a 'isapi_redirect.properties' file and copy this content. Now, the location and the magic_number might be different.
extension_uri = /jakarta/isapi_redirect.dll
Log_file = C:\ColdFusion11\config\wsconfig\1\isapi_redirect.log
LOG_LEVEL = info
worker_file = C:\ColdFusion11\config\wsconfig\1\workers.properties
worker_mount_file = C:\ColdFusion11\config\wsconfig\1\uriworkermap.properties
iis_buffer_enable = true
ip_restriction_file = C:\ColdFusion11\config\wsconfig\1\iprestriction.properties
AUTH_COMPLETE = 1
11. create another file 'uriworkermap.properties' and copy the content slot
/ cfformgateway / * = cfusion
/ CFFormGateway / * = cfusion
/ flex2gateway / * = cfusion
/flex2gateway = cfusion
/ cffileservlet / * = cfusion
/ CFFileServlet / * = cfusion
/ cfform-internal / * = cfusion
/ flashservices/gateway / * = cfusion
/ flex-internal / * = cfusion
rest / / * = cfusion
/*. CFML / * = cfusion
/*. MXML = cfusion
/*. As = cfusion
*.cfm = cfusion
/*. Ft3/min = cfusion
/*. Ft3/min = cfusion
/ * .cfm / * = cfusion
*.swc = cfusion
/*. CFML = cfusion
/*. CFML = cfusion
/*. CFML = cfusion
/*. CFC = cfusion
/*. CFC = cfusion
/*. CFC = cfusion
/ * .cfc / * = cfusion
/*. CFR = cfusion
*.cfswf = cfusion
/*. SWS = cfusion
*.jsp = cfusion
*.hbmxml = cfusion
12. create another file "workers.properties" and copy this content
Worker.List = cfusion
Worker.cfusion.type = ajp13
Worker.cfusion.Host = localhost
Worker.cfusion.port = 8014
Worker.cfusion.max_reuse_connections = 250
13. now go to a folder that is C:\ColdFusion11\config\wsconfig and copy the "cfwin32.dll". Location
wsconfig\connectors\installers\intel-win\prebuilt\cfwin32.dll
wsconfig\connectors\installers\intel-win64\prebuilt\cfwin32.dll
14 create a file 'wsconfig.properties' and copy the sub content. Number of bits could be changes to 32 bit if you use the 32-bit environment, this file contains site information and the IIS connector. I created this article that you configure the connector with ALL IIS sites, so set below will work.
1 = IIS, 0, true, "", bitness64 "
1.SRV = localhost, cfusion
15. now that we have created all the files and folders. We will add the IP address of the machine ColdFusion11 if IIS can communicate with CF11. There are 2 places to add the IP address.
a. "workers.properties" file, where is written "localhost" replaced by the IP address and
b. "wsconfig.properties" where is also said to replace localhost with the IP address of the machine ColdFusion11.
16. now we must work on IIS services manager, then start the IIS Manager. We will make any changes to the IIS server and when we restart IIS, it inherits all the mappings Manager and filter ISAPI in all sites.
17. click on the server and then click handler mapping. Add a script mapping and Add .cfm, .cfc, .cfml, .cfr, and .cfswf managers and then point it to this DLL. C:\ColdFusion11\config\wsconfig\1\isapi_redirect.dll.
Click request restrictions, select Invoke and select the files and folders, and Ok. In the right pane, click Edit feature authorization select run.
Example: Ask the path:-*.cfm
Executable:-C:\ColdFusion11\config\wsconfig\1\isapi_redirect.dll
Name:-cfmHandler
NOTE: Add these Manager you will use not all add them.
18. click on IIS server and select default Document and add index.cfm as default document.
19. click on IIS server and select ISAPI and CGI Restriction, select Add and 'ISAPI and CGI path' 'C:\ColdFusion11\config\wsconfig\1\isapi_redirect.dll', Description "tomcat_All". Check Allow extension path to run and press Ok.
Click on change the function parameter in the right panel and check both boxes.
20. click on IIS server and select the ISAPI filters and add a filter name 'tomcat' and the executable file "C:\ColdFusion11\config\wsconfig\1\isapi_redirect.dll".
21 now, add you a virtual directory to each site else it won't work. To add a directory virtual right click on your Web site and add a virtual directory. Alias name "jakarta" and the physical path "C:\ColdFusion11\config\wsconfig\1\isapi_redirect.dll" press Ok.
Follow this step with the same Alias and path even to all Web sites.
22 restart the IIS service, and run any ColdFusion page. It will work.
-
Flex with separate Web server and app server
I have a flex app built in Flex Builder. I put the BlazeDS server to point to an internal ip address. When I exported the build, I placed it on an IIS web server that has access to the network where the BlazeDS server is and is also visible externally. I put the file crossdomain.xml to the BlazeDS server to allow access for all (I know that's not sure, but I just want to eliminate this variable). I can make calls to remote objects when I run the flex from the internal network application. However, when you try to make calls to remote objects when you access the app outwardly I get an error that says:
faultCode = "Client.Error.MessageSend".
faultDetail = "error Channel.Security.Error Error #2048: security sandbox violation:...
endpoint = " " http:// " < internal ip address >: < port > / blazeds/messagebroker/amf"
...
I implemented the services - config.xml so that all methods of the AMF are pointing to the internal ip address.
My crossdomain.xml file is host to BlazeDS (internal IP) in the folder WEB-INF\root. I also put on the Web server? I ran the fire bug and it seems to try to recover the crossdomain.xml file by using the ip address of the internal BlazeDS server which it cannot reach because it is not exposed to the world.
So in summary, I have Web server through the flex application, and then another machine separated with the BlazeDS application. The BlazeDS application is on an internal IP address and I can't seem to make the remote to her calls when you access the outside flex application.
Your BlazeDS application should be accessible to the outside (on the internet). Internal IP address would work on your network.
-
C410a won't for mac with os x 10.8 but is accessible from the web server or old OSX
The c410a ceased to behave with the Mountain Lion. The new OS machines can access via the built-in web server, but not other way. Old mac running Lion has no problem
As I've recently updated Norton on the newer machines, I suspect that maybe that's a problem.
What router?
Why you use Norton? There is no such thing as a Mac virus and until there is...
-
TMS 14.3.2 - IIS - SHA2 server certificate is supported?
TMS server is currently at version 14.3.2 with a self-signed certificate. I want to update the existing with a SHA2 certificate server cert and certificate of my employer services group want to check support before issuing a new certificate.
Could someone tell me if a server SHA2 certificate is supported? Documentation does not specify whether they are or are not supported, but the version of IIS running supports SHA2.
Thanks for your time!
TMS will work with this type of certificate.
-
Hello
First of all, quick summary of my configuration:
- 6 devices - 3 Android and iOS 3 devices all connecting via wireless
- LAN with my own Web server and DNS. All Web sites are configured to work outside virtualhost such as mysite.local and can be access in the browser on my desktop and all devices
- My own local server weinre works again since all devices
- My own PC with Chrome and and extension edge inspect
- All devices can connect on board to inspect without any problem and in a position to use synchronized browsing Web sites on the internet
I just upgraded to the full version of creative cloud and now I can view is more Web sites on my LAN in edge inspect but ONLY on my Android devices. I would absolutely swear that my Android devices to connect but for some reason, they cannot now and I get a message "Web Page not available". In addition, it shows the IP of my desktop (I guess this is how to inspect dashboard works?) as the address that it is unable to connect. On the back of this, I tried to connect to this IP address in the Android browser but nothing happened, and I turned off the firewall on my desktop PC but still no luck. Finally, I tried everything Android devices on their own without the connected devices iOS, but also with all 6 are connected and it's the same thing every time.
Anyone able to help?
Thanks in advance,
Chris
Hi Chris,
OK, got it. I'm sure that I know what goes wrong. In iOS, the .local domain names management is automatic, but we had to in Android code in a solution for this particular situation. In iOS,
.local refers to the local computer, so when the Android client sees that URL to enter, she replaces part se1united.local of the URL with the IP address of the machine running edge inspect. In most cases, that works, but in your case, it seems that you are in fact trying to refer to a third machine whose IP address must be resolved in dialogue with your own domain name server. The code native iOS that runs properly and is not our code custom Android. So there is a problem with our Android app, but I suspect the fix for this will not be easy. In the meantime, there should be some simple solutions, you can choose from your side which must make things work correctly with applications Android and iOS.
- In Chrome, try referring to your site with the following URL: http://192.168.1.50/ OR
- Rename your server from se1united.local to something that does not include the part ".local" domain name
I think that is one of those who should work fine.
Let us know if you have any other questions or problems,
Mark
-
Not able to enable the web server in exe
Hello
I have a problem with starting a web server. I Vi which allow the address of the directory to be published and after that it makes the stream server. And there are a few jpg files and some html files in the directory. And jpg files are attached to html files. And then there are a few vi which adds the other façades Vi:s of images. And that the program runs the image files in the directory on the server are written (updated). So the point is access through a Web browser on the site where some hyperlinks and behind links that there are photos of a few front panels. And my applications automatically updated images.
Problem is that the server will not go when I've built and run the application. In the development environment, it works perfectly. I tried this on another PC too, but the exe will not connect to the server on one of the computers.
Need help, thank you
There is the attached web server startup file.
Version is 8.2
Hello!
http://digital.NI.com/public.nsf/allkb/3B2160B128EE09A886256B60006FFA66
Run in LabVIEW application to run Web server is different from the development environment. Please, look at the link above and try it if she could help you.
ARO
Do Nguyen
National Instruments technical support
Maybe you are looking for
-
My mac does not restart when the update to Mac OS Sierra
Shows this error
-
NB200 - battery indicator shows the life of the battery in percentage
HelloSomeone had this problem? My (Windows and also the PM from Toshiba) battery indicator does not show remaining battey in minute but life only in percentage.is this correct or there are some strage parameters in power setting menu? Thank you
-
I purc hased and installed 16 GB of RAM in both slots of memory available. Only 8 GB is visible (updated 4 GB). The HP Envy Sleekbook Maintenance and Service Guide HP Envy TouchSmart c03599931.pdf says on page 2 that the system supports 16 GB of RAM.
-
XP Home: Any keyboard shortcut to reach the Office?
Hello In Windows 7, the user can reach the office without having to minimize each application one by one by clicking on the rectangular button on the right side of the taskbar. What in XP Home, can I create a button on the taskbar for that? If not is
-
How to remove the device when the icon is not present in the taskbar
When I attach material to my laptop the software always removal icon in the bar spots. When I already have the material to be fixed at a fresh start it is not displayed. Should I go somewhere in the Panel to uncheck and check always show? Where ca