Focus of the cell in 11.1.2.2 forms ADF

Similar Questions

• TableLayoutManager doesn´t focus in the Manager with two focusable elements

  Hello

  I m using TableLayoutManager in my project. It is an example of my problem:

  I have this code:

  public MyScreen() {
          setTitle("TableLayoutManager_Example");
  
          VerticalFieldManager vfm0 = new VerticalFieldManager();
          vfm0.setBorder(BorderFactory.createSimpleBorder(new XYEdges(10, 10, 10, 10), Border.STYLE_TRANSPARENT));
          VerticalFieldManager vfm = new VerticalFieldManager();
          vfm.setBorder(BorderFactory.createRoundedBorder(new XYEdges(5, 5, 5, 5)));
  
          TableLayoutManager table = new TableLayoutManager(new int[] { TableLayoutManager.USE_PREFERRED_SIZE,
                  TableLayoutManager.SPLIT_REMAINING_WIDTH, }, null, 0, Manager.NO_HORIZONTAL_SCROLL
                  | Manager.NO_VERTICAL_SCROLL);
  
          LabelField lb=new LabelField("Label1    ");
          HorizontalFieldManager hfm=new HorizontalFieldManager();
          TextField tf=new TextField();
          LabelField lb2=new LabelField("Label2",Field.FOCUSABLE);
          tf.setText("Text");
          tf.setMaxSize(5);
  
          hfm.add(lb2);
          hfm.add(tf);
  
          LabelField lb3=new LabelField("Label3");
          LabelField lb4=new LabelField("Label4",Field.FOCUSABLE);
  
          table.add(lb);
          table.add(hfm);
          table.add(new SeparatorField());
          table.add(new SeparatorField());
          table.add(lb3);
          table.add(lb4);
  
          vfm.add(table);
          vfm0.add(vfm);
          add(vfm0);
  }
  

  The problem is that I have can´t emphasis in the TextField. If I just add lb and hfm components to the table, it works, but if I add other components focuss (as example) I can´t focus in the TextField, the emphasis in Label4:

  

  What can I do?

  Thank you.

  I ve found a good solution. I ve replaced the TableLayoutManager navigationMovement method. This is the code:

  /**
       * Navigation movement to allow for both cell to cell within a columns and row movement
       */
      protected boolean navigationMovement(int dx, int dy, int status, int time) {
          int focusIndex = getFieldWithFocusIndex();
          int dirY = (dy > 0) ? 1 : -1;
          int absY = Math.abs(dy);
  
          for (int y = 0; y < absY; y++) {
              focusIndex += _columns * dirY;
              if (focusIndex < 0 || focusIndex >= getFieldCount()) {
                  //#ifdef BlackBerrySDK4.5.0
                  this.invalidate(); //ref #217
                  //#endif
                  return false;
              } else {
                  Field f = getField(focusIndex);
                  if (f.isFocusable()) {
                      f.setFocus();
                  } else
                      y--; // do it over again
              }
          }
  
          int dirX = (dx > 0) ? 1 : -1;
          int absX = Math.abs(dx);
          for (int x = 0; x < absX; x++) {
              focusIndex += dirX;
              if (focusIndex < 0 || focusIndex >= getFieldCount()) {
                  //#ifdef BlackBerrySDK4.5.0
                  this.invalidate(); //Ref #217
                  //#endif
                  return false;
              } else {
                  Field f = getField(focusIndex);
                  if (f.isFocusable()) {////////////////////////NEW CODE /////////////////////////////////////                    if(f instanceof Manager){
                          int fieldsInManager=((Manager)f).getFieldCount();
                          if(fieldsInManager>0){
                              for(int i=0;i
  I'm looking for a manager within the cell. If I found it, I put emphasis in its elements. It works with a Manager with one or more of the focus object elements.
  
  If you see it is good, you can add this code to your original code
  Thank you.
  		   

• Set the focus to the text box of the embedded NumericStepper control

  I have an application that requires I use NumericStepper edit control as ItemEditor of a DataGrid column.

  I have two problems that I can't seem to overcome, one being the result of the solution to another:

  (1) I need to instantiate the component NumericStepper during execution, because I don't ' know advance what columns it will require.  More important still, I need to specify default attributes (styles, min, max, width, etc.).  I can't understand how to specify these attributes other than in a .mxml file.  To handle this, I have crreated a component 'wrapper' that's an HBox with a NumericStepper inside her, and I can specify my attributes on the tag NumericStepper.

  (2) now that I did #1 above, although, when I click a DataGrid cell that uses this component editing, the editor comes back but the text box is NOT centered, which means that the user must click a second time if he wants to type a number.  It's very irritating, but I do not know how to manage the focus such as when my HBox-with-embedded-NumericStepper' control rises, it concentrates and its selected data, NumericStepper, just as the 'base' is.

  So, my questions are:

  (1) can I somehow assign property values to a standard when executing NumericStepper, so that I can avoid using my built-in custom control HBox?

  (2) how can I manage the focus so that when my control HBox is in place, the text box is selected and fucused?

  That sounds confusing, but I have a small program to demonstrate this.  The "QtyBad" column uses my own NumericStepper HBos-based and not to be put in the correct focus when activated.  The "QtyGood" column has demonstrated APPROPRIATE behavior, as exposed by the native NumericStepper component, but I can't specify additional attributes / s on this subject.

  Here are all of the program - called "DGNumStepperDemo" - here:

  DGNumStepperDemo.mxml

  <? XML version = "1.0" encoding = "utf-8"? >
  " < = xmlns:mx mx:Application ' http://www.Adobe.com/2006/MXML "layout ="absolute"creationComplete =" onInitialize () "> "
  < mx:Script source = "DGNumStepperDemo.as" / >
  < mx:DataGrid id = "dg1" editable = "true" top = "20" left = "20" width = "350" height = "124" >
  < / mx:DataGrid >
  < / mx:Application >

  DGNumStepperDemo.as

  
  

  ActionScript file
  Import mx.collections.ArrayCollection;
  Import mx.controls.DataGrid;
  Import mx.controls.dataGridClasses.DataGridColumn;
  //---------------------------------------------------------------------------------------- -------
  [bindable]
  private var gridData:ArrayCollection = new ArrayCollection([{Qty:0},{Qty:5},{Qty:10}]);

  private function onInitialize (): void
  {
  CDL of the var: Array = new Array();
  var dgc:DataGridColumn;

  DGC = new DataGridColumn ("QtyBad");
  dgc.dataField = "Qty";
  DGC. Width = 75;
  dgc.itemEditor = new ClassFactory (EditorDGNumericStepper);
  dgc.editorDataField = "value";
  cols.push (DGC);
  
  DGC = new DataGridColumn ("QtyGood");
  dgc.dataField = "Qty";
  DGC. Width = 75;
  dgc.itemEditor = new ClassFactory (mx.controls.NumericStepper);
  dgc.editorDataField = "value";
  cols.push (DGC);

  DG1. Columns = cols;
  DG1. DataProvider = gridData;
  }

  EditorDGNumericStepper.mxml

  <? XML version = "1.0" encoding = "utf-8"? >
  " < = xmlns:mx mx:HBox ' http://www.Adobe.com/2006/MXML ""4"verticalAlign ="middle"paddingRight ="4"paddingLeft = verticalScrollPolicy ="off"horizontalScrollPolicy ="off"> "
  < mx:Script >
  <! [CDATA]
  public function get value(): number {return itemQuantity.value ;}
  []] >
  < / mx:Script >
  < mx:NumericStepper id = "itemQuantity" value = "{data.". Qty}"minimum maximum ="0"="100"/ >
  < / mx:HBox >

  If anyone who bothers to run it, you can see what I mean about the focus problem in the QtyGood and QtyBad columns.

  Any help is appreciated!

  Quick response to the #2 is to change the EditorDGNumericStepper.mxml to the following:

  
  http://www.adobe.com/2006/mxml"
             verticalAlign="middle" paddingRight="4" paddingLeft="4"
             verticalScrollPolicy="off" horizontalScrollPolicy="off"
             creationComplete="focusManager.setFocus(itemQuantity)">
       
            
       
       
  
  

  The only thing I did was put the NumericStepper to 100% width so it fills the column like the standard NumericStepper and it looks a bit better and I added a creation complete event handler that sets the focus to the NumericStepper.  I tested it and it will be emphasis each time on it like a standard stepper.  There may be a more "preferred" way, but it's simple and effective.

  On the #1 question, you want to change the properties, styles, etc. of a NumericStepper standard once it has been added to the data grid?

• Return all column names of the cells that match a value in a single cell

  

  I want to be able to scan all the cells in column 1 in column 3 (there could be several) which belong to the same line and check if they all have a value y (X). If they have no value, I want all columns to display all the names of the matching columns as follows: "column 1, column 2" for Elemento.

  This can be a good start:

  

  B2 = if (counta (C2) > 0, C$ 1, "" ") & IF (COUNTA (D2) > 0', ' & D$ 1," ") & IF (COUNTA (E2) > 0', ' & E$ 1," "") & IF (COUNTA (F2) > 0', '& F$ 1,' ')

  It's shorthand dethrone select cell C2, then type (or copy and paste it here) the formula:

  = IF (counta (C2) > 0, C$ 1, "" ") & IF (COUNTA (D2) > 0', ' & D$ 1," ") & IF (COUNTA (E2) > 0', ' & E$ 1," "") & IF (COUNTA (F2) > 0', '& F$ 1,' ')

  Select cell B2, copy

  Select the cells B2 the bottom of column D, dough

  To add additional columns, you copy the atomic unit:

  & IF (COUNTA (D2) > 0', '& D$ 1,' ')

  and update D2 with the new column and D$ 1 with the new column.

  then... If you add a new column (G, for example) that you want to change it:

  and IF (COUNTA (D2) > 0', '&D$1,' ')

  TO

  and IF (COUNTA (G2) > 0', "&G$1," ")

  and the updated formula would be:

  = IF (counta (C2) > 0, C$ 1, "" ") & IF (COUNTA (D2) > 0', ' & D$ 1," ") & IF (COUNTA (E2) > 0', ' & E$ 1," "") & IF (COUNTA (F2) > 0', ' & F$ 1,"") & IF (COUNTA (G2) > 0', '& G$ 1,' ')

  fill down like before

• How to change the default alignment of text in the cells in a table on the demand for numbers?

  I'm new to Mac. I own a MacBook pro MF839HN/A and currently using the 3.6.2 release NUMBERS (2577). I want to know if I can change the default alignment of text in the cell in a table of NUMBERS application? Also, when I select all the cells in a table to change their alignment, I can only change the horizontal alignment of the text and not the vertical alignment. To change the vertical alignment of the text in a cell, I have to select them individually. Help me with two questions.

  The only way I know is to create a table that is set up as you like, then save the empty document as a template customized by using the menu item "file > save as template:

  

• To edit a cell, Numbers Help said to double-click on the cell

  To change the contents of a cell, Numbers Help said double-click the cell to do the insertion point appears, then enter.

  I can double click on a cell, constantly, but rarely the insertion point appears.

  How can I make it work every time?

  Try adjusting the double-click speed in system preferences > accessibility:

  

  In general, I double click at a rate that is roughly 5 clicks per second. If you are double clicking too slow then numbers can interpret this as two simple clicks rather than a single double click event.

• for debugger, shortcut moves keyboard focus to the component source from research

  I'm in the debugger and use the search function to find a definition of the function by pressing ctrl + d. I select the function definition.
  It works great so far, but the focus of the cursor is always in the search window. In general, I now want to set the focus on the source pane (so I can scroll, set breakpoints, etc.). However, I can't find a shortcut to the source window. Y at - it a shortcut or other quick way without using the mouse?

  Thank you
  Ben

  I couldn't find a shortcut or the other, then maybe suggest to add such a feature.

  Firefox Developer Tools ideas - ideas for the development of Firefox tools:

  • https://ffdevtools.uservoice.com/forums/246087-Firefox-developer-tools-ideas

• Counting of string separated by commas in the cells of a column

  Hi all

  Try to pass some of my Excel spreadsheets in numbers. I'd appreciate help with a specific string of text/number in the cells in a column. In the example below (no sheet of complete works) is a column, the packs work (WP01, WP02 and so forth)-which means work packs a particular Test & Validation document (e.g. TV-102) applies to.

  I would like to be able to simple counting the number of occurrences, say "WP05", is applicable. If I use COUNTIF, on the "WorkPack" column, he has only the cells that contain only the string "WP05" (i.e. in the sheet, I work with, I know there are 22 entries for "WP05" in the column of pack work, but only the 14 account)

  Note: I am building this on my MAC, but would like to be able to access and use these sheets on my iPad - don't know if that makes a difference.

  Any suggestions / ideas?

  Thank you in advance...

  ATB Perry

  ID	Paper group	WorkPack
  TV-91	Validation of NFR	WP05 WP06
  TV-102	Certificate of conformity	WP05 WP06
  TV-103	Validation of NFR	WP05 WP06
  TV-206	Test EN	WP05
  TV-207	Test EN	WP05
  TV-208	Test EN	WP05
  TV-209	Test EN	WP05
  TV-212	Certificate of conformity	WP01, WP02 WP03, WP04, WP05, WP06, WP07, WP08 MICROSOFT WINDOWS CURRENTVERSION, WP09, WP10, WP11, WP12, WP13, WP14, WP.15
  TV-213	Validation of NFR	WP01, WP02 WP03, WP04, WP05, WP06, WP07, WP08 MICROSOFT WINDOWS CURRENTVERSION, WP09, WP10, WP11, WP12, WP13, WP14, WP.15
  TV-214	Test EN	WP01, WP02 WP03, WP04, WP05, WP06, WP07, WP08 MICROSOFT WINDOWS CURRENTVERSION, WP09, WP10, WP11, WP12, WP13, WP14, WP.15
  TV-215	Validation of NFR	WP01, WP02 WP03, WP04, WP05, WP06, WP07, WP08 MICROSOFT WINDOWS CURRENTVERSION, WP09, WP10
  TV-308	Validation of NFR	WP01, WP02 WP03, WP04, WP05, WP06, WP07, WP08 MICROSOFT WINDOWS CURRENTVERSION, WP09, WP10, WP11, WP12, WP13, WP14, WP.15
  TV-338	Test EN	WP05

  Here's how I would approach (without more):

  

  Add additional columns to your table (those titled "WP01',"WP02", etc.).  Enter the names as shown

  The first line is a heading row.

  Also... Add an extra line at the end and make a footer row

  D2 = (LEN ($C2) −LEN (REPLACE ($C2, D$ 1, ""))) ÷LEN ($1 D)

  It's shorthand dethrone select cell D2 and type e (or copy and paste it here) the formula:

  = (LEN ($C2) −LEN (REPLACE ($C2, D$ 1, ""))) ÷LEN ($1 D)

  Select cell D2, copy

  Select cells D2 the bottom of column R, paste

  in the footer row (row 15 of this example) iff the following formula:

  D15 = Sum (D)

  Select the cell D15, copy

  Select the cells D15 thru R15, dough

  I could never find 22 WP05 instances (even when I search your message on this web page):

  

• Is it possible to not only open several tabs at startup, but also focus on the last?

  At the start, I want to focus on the tab on the very good. By default, firefox focuses on the left tab when opening multiple tabs at startup.
  Subject: solution of config?
  tab-mixplus does not help

  Not that I know of.
  Note that you can use Ctrl + 9 to go to the last tab.

  • https://support.Mozilla.org/KB/keyboard+shortcuts

  If you reopen the tabs of the previous session automatically then the focus is on the tab selected when you close Firefox.

• Is my Apple iPad WiFi Mini unlocked the cell plant (Verizon)?

  Is my Apple iPad WiFi Mini unlocked the cell plant (Verizon)? It was purchased at Apple December 2013. He is a certified refurbished by Apple

  Yes.

• Change the cell referenced in the formula of numbers

  I have a cell in the worksheet 2 (e.g. E1) I want to access a value contained in an adjacent cell (eg.  A1), then use this value to change the value of the cell that is in a cell in sheet 1,.

  The simple formula would be: = Sheet 1::Table 1::D3

  But I want the selected line in the D column is controlled by a value which will change.

  for example if it is a 3 in the cell, then it displays the value found in cell D3 in sheet 1.

  If it finds a 4, then it displays the value found in cell D4 of sheet 1,

  and so on.

  Hi Ron,

  I think you're looking INDEX(). Here is an example

  

  If your tables have unique names, you don't have to specify the sheet. I put the two tables on the same sheet for clarity.

  Quinn

• Absolute cell to the cell range reference

  I would like to refer to a range of cells on one worksheet to another, all in the same worksheet.  When shoves and columns are changed on the source worksheet, I would like the second sheet to reflect this change, so I think that I need the absolute references.  I know I can do this for a single cell by making reference to the cell, by clicking on the arrow and horizontal and vertical locking.  Is it possible to do it for a range of cells?

  Thanks for your help.

  Hi GB,

  In the example, copy table cells reference the same cell in the Source, using the INDEX table.

  

  The formula entered in B2 is the following:

  B2: = INDEX (Source: $A:B,ROW(),COLUMN()))

  That the form is completed on the columns, the reference to a column remains the same, and the column reference b change to match the column containing this iteration of the formula.

  The reference by specifying only the columns where a range is average planned is in all cells in the column.

  Complete the form on the left to A2, then fill both down to line 3.

  Add rows or columns in the Source table and filling the new cells of data has no effect on the copy table.

  

  The copy table should be expanded using the column and handles command line at the top right and bottom left of the table, or the control handle of lines and columns in the lower right corner (visible on the first image of th, where a single table is selected)

  As the rows and columns are added, numbers automatically fills the formula into the new rows or columns.

  

  If the copy table is extended beyond the size of the Source table, 'extra' columns or lines contains an error of "bad reference."

  

  Add lines to the source table removes the error in previously 'extra' copy lines, because there the range, specified as the "entire column" automatically sees the lines added.

  

  

  The column added, however, must be removed from the copy, and then added to copy the formula without error in column C in column D.

  Kind regards

  Barry

• Automatic switching of WiFi in the cell for the data not work, requires a restart of the phone

  The phone is a peak of Geeksphone, and the version of the operating system is 1.4. The problem is with the automatic switching of the WiFi to cell for my data. If I take the phone outside the WiFi range, it does not acquire the data (2 G, Edge, H or 3 G) signal and so I have no data. I left for hours without success. The only solution is to reboot the phone, then outside the configured WiFi connections and it will collect data signal. When I re - get the WiFi area, it captures the network and without problems.

  I also had this problem with version 1.1. I upgraded to think it could be fixed, but he did not.

  Thank you, Ralph. There was an update available which appear not yesterday. After the installation, I get the options that you quote, namely to turn the cell data in the notification area. Thanks a lot for the tip and the quick response.

• How do you return a blank in table 2, when there is no data in the cell related in table 1?

  I run a recreational League of golf and have been recording the scores of the players (50 + players in total) with the intention of maintaining a form of disability from the League.

  So far, I did most of the calculations manually in number. Recently, I have experimented using the Lookup function but have encountered a problem with the time where the player does not play this week.

  In table 1, where I do all scores record cel when they do not play is left blank. However, in table 2 than corresponding cel returns a 0... strikes completely out of whack handicaps.

  Here is what I used in table 2 for the information of table 1...  SEARCH (name, 2016 Stats::Table 1 $Last: $ name, 2016 Stats::Table 1::G44)

  I also tried to add an IF statement, but I have obviously not understood correctly as he said I tried to refer to a cel in the statement itself.

  Example of the disability Page in the table 2 list a 0 is returned in cel 6... which is then averaged in the cel of last second... namely the problem. The cel with the 6 in it is a formula that counts the number of moves played and see it 6 because it counts as a trick played 0. This shows the wrong average score of 65.666

  Them	A	78																						1	78
  Me	Me	80	75	81	0	81	77																	6	65.6666666666667	-10

  As it appears in table 1. indicating the total number of rounds played in 5 and returning the precise average score of 78.8

  Me

  Me

  80

  75

  81

  81

  77

  5

  78.8

  Hi pondball,

  (Could be my 'golf name' somedays)

  

  Formula in Handicap::B2 and filled to the bottom and right at Handicap::X4

  = IF (LOOKUP ($A, data: $A, Data::B)=0,"",LOOKUP($A,Data::$A,Data::B))))

  IF compared the results of the first SEARCH and if it is zero, returns an empty string. If the comparison returns FALSE, the second SEARCH is called, find and returns the result of zero. AVERAGE does not take into account all results of text, including the string NULL, a zero-length text value.

  COUNT (used in the column count the number of turns) also ignores the text values.

  4th place of disability shows one of the reasons for not using LOOKUP.

  SEARCH alwas accepts a "close fit" with the search value. 'near match' for RESEARCH is defined as 'the largest value equal or less than the value of the research', and for the values text, "less than or equal" can be described as "identical or come forward in a list of items of text in alphabetical order.»

  For us, the other two values in the name list are 'less' us and the most important is 'Them', the values for 'Them' are returned.

  For this reason, I tend to use VLOOKUP instead of RESEARCH in many cases.

  VLOOKUP present the disadvantage of requiring her research-where location which will be the first column of the lookup table (which is not a problem here, because the location of the research is one ot the column data table).

  But also has the advantage of af being able to require an "exact match" search value.

  Here's the same tables of two, with VLOOKUP replacing LOOKUP. Note that the VLOOKUP function has a different syntax than the LOOKUP function.

  

  Formula VLOOKUP in Handicap::B2, filled with verse down and right at Handicap::X4:

  = IF (VLOOKUP ($A, Data: $A:$ X, COLUMN (), FALSE) = 0,"", VLOOKUP ($A, Data: $A:$ X, COLUMN (), FALSE) ")

  Written as above, the formula works correctly in rows 2 and 3, but will just return the error in the 4th row triangles, since it will not find a match (exact n) for 'Us' in column A of data.

  After confirming that it produces no unexpected error, wrap the formula in function SIERREUR as shown below and repeat the filling down and the right filling operations above.

  SIERREUR function interrupt all errors, including those affecting the results without your knowledge if they occur. Always delay adding IFERROR until you know what are the errors he fools.

  =IFERROR (IF (VLOOKUP ($A, data: $A:$ X, COLUMN (), FALSE) = 0,' ", VLOOKUP ($A, data: $A:$ X, COLUMN (), F ALSE))," ")

  Y2: = COUNT (C2:X 2)

  Z2: = AVERAGE(C2:X2) (base form)

  Z2: = IF (Y = 0,' ", AVERAGE (C2:X 2)) (real form)

  The encapsulation of the AVERAGE function in the IF statement deletes the calculation if the number of items to the average value is zero, AVERAGE preventing from return to a division by zero error. The number of circles in the column there is NOT used in the calculation of the average (AVERAGE did his own count), but is used as a switch 'OK to calculate' leaving the calculation of the AVERAGE to move forward.

  Kind regards

  Barry

• use the contents of the cell to a cell reference of formula calculate

  In Apple "Numbers", in order to update a spreadsheet each time that the values are added, I first need to calculate the number of days between the date of first entry and last date, using the COUNTA() method. Gives me the line number of the last entry.  For this I "CONCATENATE" a column letter known to a cell reference.

  Using this cell reference, I would like to know how can I use the contents of the cell to update the information contained in the rest of the worksheet. Is this possible?

  Any help would be appreciated.

  Thanks in advance.

  I have a problem following exactly what you want to do, but think that INDIRECT can help.  More here.

  SG