Folder Windows\System32 issue Windows 7 Pro

Similar Questions

• OfficeJet Pro 8500 A910 will not scan to folder - Windows 8 Pro

  I upgraded my HP M9500Y PC from Windows 7 to Windows 8 Pro.

  My printer is HP OfficeJet Pro 8500 A910.  In Windows 7, all the functions of print/scan/fax worked perfectly.

  Windows 8, printing without problem, however, analysis of the file function fails.

  When a document is scanned, the printer seems to be analysis correctly, but the destination folder contains a file of length zero with the new file name.  I tried the formats PDF and JPEG scans.  All attempts to produce files of length zero in the destination folder.

  I tried to change the path of the destination folder by replacing the address IP for the name of the PC, but that made no difference.  The destination folder is shared correctly on the Windows network and the configuration utility based on the web of HP for the digitization of records indicates that all tests have passed.

  What is the sequence of installation for Windows 8 will accept scan-to-folder operations.

  Hello

  You have the latest firmware installed on your printer?

  http://support.HP.com/us-en/document/c02830943

• I can not add a new folder "New folder", or do a right click "New folder" Windows 7 pro, IE 10

  I don't know what happened, but I can't add a new folder more...

  Hello

  Glad to know that the problem has been resolved. Thanks for sharing the information. If you have additional questions about Windows, please post your questions in this forum.

• My Windows 7 Pro system has some serious hardware, internet connection and security issues. The system image and restore the system in case of failure.

  My Windows 7 Pro system has some serious hardware, internet connection and security issues.

  My efforts to remedy by restoring a system image backup failed.  At this point, I'm ready for a new clean install if I have to buy a drive to do.  My question is whether a professional Ultimate upgrade will or will not fix these bugs.  In addition, what is the cause of restoring the system to fail?  I never turned off or cannot create regular restore points.

  Original title: upgrade a "Fix" for existing system problems?

  My Windows 7 Pro system has some serious hardware, internet connection and security issues.

  My efforts to remedy by restoring a system image backup failed.  At this point, I'm ready for a new clean install if I have to buy a drive to do.  My question is if an upgrade to Professional Ultimate will be or not correct not these bugs.  Also, what is the cause System Restore to fail?  I never turned off or cannot create regular restore points.

  Hello

  1 re-installing/repairing software will not fix hardware issues.

  2. the operating system upgrade is not the way to solve computer problems that can be carried forward.

  3 1. If you use Norton, you should disable Norton inviolable Protection before using System Restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  AVG will cause problems with SR too.

  «Temporarily disable AVG»

  http://www.Avg.com/ww-en/FAQ.Num-3857

  2. try to use Safe Mode system restore.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  "Start your computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  3 Malware will stop at the system restore.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  ____________________________________

  We really need for more details:

  "My Windows 7 Pro system has some serious hardware, internet connection and security issues.

  See you soon.

• Tried the fix, still no tree to display in Windows 7 Pro (64-bit) folder

  Windows 7 Pro (64 bit) on a new laptop HP dv7 Proliant. Windows Explorer is set to a display of libraries only. The classic file tree disappeared. The change means that I have to run two separate Windows Explorer instance if I want to move files from one folder to another.

  I tried to selection of folder/organize and Search Options/view all files proposed in a previous answer to the problem, but still no display file tree. I also don't run Sfc - no problems found. So, is there a solution for this? Can I get the file tree view in Windows Explorer?

  Note to the development team: libraries is the worst possible metaphor to treat files on a computer--especially for those who are still a little computer. In addition, forcing user files in folders on the disc of the operating system is a maddening practice which virtually ensures files will be lost when (not if) operating system crashes.

  Have you tried actually organize / layout / Navigation pane?

  Show all folders only too complicated the Navigation pane by inserting a bunch of folder in Favorites registration / uncheck show all folders.

• Change the order of photos in a folder of photos from Windows 7 Pro

  I am a wedding photographer and until this week have used XP Pro. Due to a blow up PC, I had to get a new one with Windows 7 Pro on this subject. Under XP, I edited my photos in Nikon Picture Project and then copied to my images. I could then change the final order, they appeared by clicking on the left and drag it. This does not work when I copy them into a folder of photos of Windows 7 Pro, I can't change their order of appearance, I need to do this before I burn it to a CD/DVD to give to a client. It's a minor thing but cause me major problems. I note that I have almost 70 years and it took me several years to master XP, there isn't a lot of time to master Windows 7 no matter what help would be really appreciated.

  Depends on exactly how / what to order you need.

  In the images window, to the tr at the top of the page there are a few options to "reorganize by.

  There is also a drop-down list arrow options view

  Also on the title header for example name/Date etc if you click the title files will be re-arranged, usually to name, in alphanumeric order and Date, asscending or descending

• Windows 7 Pro upgrade Activation issue.

  Windows 7 Pro upgrade Activation issue. I bought a real upgrade of Windows 7 Pro 64 bit. In reading, there is no way I could actually update my current installation of XP and keep all the settings, I decided to just reformat my hard drive and install windows 7 as a custom install fees. Now, I can't activate Windows 7 because it claims that I do not have a version of windows installed on this hard drive. Is it possible (armed with my XP and Windows 7 product keys) I can activate my software? Or should I go through the hassle to format my drive again, stick XP on it simply to crush it with Windows 7 so I can activate it? Feels like a bit of an oversight for XP to 7 plants of valuation. Thanks for any help you can offer!

  N.

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Re-install Windows XP Pro: Windows will not start - WINDOWS/system32/config/SYSTEM missing or damaged

  Windows tells me to run the install from the original CD, and then to enter the 'r' to repair the problem. I never get: Windows reboots repeatedly, or it crashes just without giving me the chance to enter the 'r '.  A Windows XP Pro with SP3 iso file did not help; not more than another copy of a Windows XP Pro with SP2 CD. What should I do now? How can I systematically enter the Windows installation, and how can I do a repair installation?

  Yaaakov Kayman, retired engineer-programmer/software system (for the most-mainframe)

  http://support.Microsoft.com/kb/311755

  read the above for asms file missing

  ==========

  also please note that you can not do a repair install on xp sp3 with a cd of xp sp2.

  It must be a cd with sp3 slipstreamed CD.

  =====

  If you can get into your bios default and the cd to start everything first and try again, what happens this time?

  In addition, clean the cd by wiping gently from the Center to the edge, NOT in a circle, with a soft cloth wet litely.

  your cd can have a streak that gives you the error.

  =========

  It can also be your player, you have a tower with two drives? If so pass out them and see if the problem occurs.

• Windows 7 Pro - automatic update issues.

  I did a clean install of Windows 7 Pro (with SP1) a few days ago. The PC works perfectly, apart from the fact that Windows Update will simply not work.

  When I click on the "Check For Updates" button, it informs that it is looking for updates, but that she always looking. I left on for more than 24 hours, but he just keeps going until I stop and can't find updates.

  I ran the advocatus of Windows Update and also the difficulty of problems updating from the MS site, both without success. I also checked that MS .net Framework is installed (that is, version 4.6.01055)

  Can someone tell what could be the problem here? It's driving me crazy!

  Thanks for the update.

  When you have several updates to install, you won't after a clean installation, you should consider installing batch of 10 / 20 to avoid the scenario that an update causes all updates to fail. It also allows to connect to the internet using an ethernet cable and not wireless, which is significantly slower and less reliable.

• Windows 7 Pro 32 bit 64 bit cd key issue.

  I recently bought more ram for my computer. I didn't know at the time; about 2 years; that I would need 64-bit Windows 7 Pro to use it instead of the 32 bits that came with my Lenovo Thinkpad SL510. After a search very heavy (an egg hunt who could have taken much less time than he did), I came across the subject of Microsoft community I was looking for. I didn't buy what I consider basically the same operating system twice just to use something else for my computer which also cost money. Here, the forum said the cd for my 32 bit key should work for my 64 bit as long as the operating system is the same otherwise this detail. So I have my backup files and put them in windows.old hoping for the best. Everything seems to work properly, it authenticated after connecting to the internet. Then last week he gave me 14 days to insert another cd key. I called Microsoft who referred me to Lenovo, which has then returned me once more because they say without guarantees that they are software problems. I did not go to a third call in the hope to avoid becoming a tennis ball. I hope I can get this resolved online. I could pay like 10-15 dollars to a new key if the option arises, but I'm leaning toward Windows 8 before the eligible option sounds in my head. Also, no offense to the developers and programmers, but I tend to like to wait at least a year or two after an os is released to buy it, just in case the new errors occur in updates or similar. Please advise me a course to take here or direction. Thank you for your time.

  Try again by phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Windows 7 Pro 64, windows update/Defender/firewall has stopped working. Firewall gives me error 0x6d9. Defender gives me 0 x 80070424.

  Original title: Windows 7 Pro 64, windows update/Defender/firewall has stopped working.

  I have Windows 7 Professional 64 bit installed, after the time of my last updated 31/7, my windows update has stopped working, and no so Windows defender and firewall.  Firewall gives me error 0x6d9. Defender gives me 0 x 80070424.  Update Windows to 7.31 was an update of the Defender, however, windows update will not give me the option to uninstall this update because the Defender has completely disappeared from the prompt that allows you to choose which puts up-to-date to uninstall. Is it possible to manually remove somewhere else?

  I ran SFC/scannow and I WAB32res.dll has been altered, so I copied the file on my windows 7 CD for 64 Professional (from program files/common files) and copied and replace my program.files/common files one.  I restarted the SFC and the same error occurred.  I had 5 errors like this:

  2012-08-03 19:15:59, 000002fb CSI Info [SR] cannot repair the military record [l:24 {12}] "wab32res.dll" Microsoft-Windows-WAB-Core, Version 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 = (9), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch. "

  I also ran Microsoft Safety Scanner Scanner, he finds 16 errors and fixed them (I saved the names), but even after I reset the computer my Windows Update/Defender/firewall STILL does not work!

  Anyone have any ideas? Especially how to fix 'wab32res.dll"maybe that I recorded it in the wrong place?

  I noticed there is one in each 'program folder' folder (program files x 86 and regular for 64 bit).  Is also wab32res.dll somewhere in system32?

  Thank you!

  Hello
   
   
  Method 1: See the following steps:
   
  a. at a command prompt, type the following command and press ENTER:
  takeown /f Path_And_File_Name
  For example, type takeown /f E:\windows\system32\jscript.dll.
  b. type the following command and press ENTER to grant administrators full access to the file:
  ICACLS Path_And_File_Name/grant ADMINISTRATORS: F
  For example, type icacls E:\windows\system32\jscript.dll/grant administrators: F.
  c. type the following command to replace the file with a good copy of the file:
  Copy Path_And_File_Name_Of_Source_File Path_And_File_Name_Of_Destination
  For example, type copy E:\temp\jscript.dll E:\windows\system32\jscript.dll.
   
   
  Method 2: Since all this started after a Windows Update, restore the computer to a date where updates are not installed.
   
  Reference:

  System Restore: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions
  Method 3: After System Restore, windows updates are available again, put the computer into State of startup in minimum mode and then allow Windows Update and see if that helps.
   
  Reference:
   
  A clean boot to test if any element of service or third party application startup is causing this issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135
   
  Note: when you're done to diagnose, follow step 7 in the article to start on normal startup.

• HP Photosmart 3210 will not install on Windows 7 Pro 64 bit.

  HP Photosmart 3210 will not install on a brand new desktop running Windows 7 Pro 64 bit.  I downloaded the latest software, and when I run it, the installation window disappears shortly after it starts.  No error message.  I ran into several related issues lately.  I can't install a ScanJet 5590 on a new laptop running Windows 7 Pro 32-bit.  Said it ends, but nothing is installed.   Could the fact that there are other HP printers installed on these computers (network printers) installed using driver only before attempting to install the software cause problems?  I spent hours trying to solve these.

  OK, much better progress!

  If the software is always installed, tell him you'll connect later.

  Go to devices and printers, look for the printer here, make sure you that no documents waiting to print and delete the printer if it is there.

  Then go into Device Manager and remove all photosmart series 3200 drivers you find, you may need to click displays hidden on the view menu.

  Thirdly, go back to the devices and printers. Select another printer, as the writer XPS comes with Windows. Along the top, with adding a device, add a printer, print server, you will see properties. What to choose and go to the tab drivers. If you have the HP drivers in there you do not, select them and choose delete and "delete the driver only."

  Now restart and go to your Start menu and your HP folder. You must have installed the software, just no device driver, select "add a device" or "printer setup and software." Installation should complete without problem.

  One last thing, you must temporarily turn off firewall and antivirus installation, in which case he mistakingly tries to block the attempt to install.

  Good impression!

• Windows XP Pro SP3, OEM in Dell D600 "not responding" on every article, every time, all the windows

  My DELL D600 has OEM Windows XP Pro SP3, and netframeworks all or almost suddenly started not ANSWER DO NOT each time. I don't know what went wrong, it's driving me crazy. I can't afford to upgrade.

  I tried the fixit from Microsoft online, no luck.

  I uninstalled a few programs, perhaps thinking it's too full. Still no luck.

  Whenever I use any folder window, or any element of the queue at all, the same thing happens, every time. "Not responding" delays on the window or the desktop contains the item. Must hit Ctl + Alt + Delete at least twice, if not 3 - 4 times.  Each 'entry' lasts for a number of at least 26 and often much longer.  Basically, Windows is not very functional.

  I have two OEM for Dell, not sure that I put here (I was wondering if I should repair-installation Windows), but worried to destroy my Office Server installations that have 3 WordPress developments.  I can't afford to destroy the.

  Any ideas to FIX this would be greatly appreciated.

  Thank you.

  Good, minor success.

  The returned quickly file number, but a re - check with Roguefix showed, it was not clear, no change in System.

  I therefore decided to start uninstalling things, hoping to uninstall accidentally the culprit.

  First I stripped all the netframeworks and the SPs.  Has failed, file number remained.

  I then started to uninstall programs. After uninstalling programs a half-dozen, suddenly THE FILES ARE WORKING AGAIN!  Don't ask me why.

  Then, I rebuilt my netframeworks and SPs.

  Then, I clicked to access Microsoft Updater to get up to speed.

  IT WILL NOT BE UPDATED.  Failed! is what I get.  It says the software needed TO be updated is not in my HD and offer a download. When I try to download and install failed!  It will be not even installed that.

  This goes back to the same "cause" - for reasons unknown the last 4-6 weeks, installing any updates in my DELL D600 Windows XP Pro OEM.  Initially, they install.  Then begins the phase were some updates installed, others down without reason.

  Then, no updates would be installed.  That was BEFORE I plucked executives trying to solve the issue of records.

  It is not even asking me to install the real test happened before, I think that.  I think it was in August 2013 or almost.

  I'm desperate to get the updates, if you have an idea on how to help me.

  Thank you.

• Cannot get Windows XP Home Edition for a mapped network drive / share on a computer of Windows 7 Pro 64-bit

  I constantly tried to use the "NET USE" syntax to get a Windows XP Home system to keep & share mapped network drive on a Windows 7 Pro 64-bit of the system and nothing I tried or worked on ANY blog. I can map the current network through made normal drive right click on 'My computer' and then provide a designation of drive letter with the correct path and have had great success using the function "connect using a different user name." However, even with the box checked to re-connect to the opening of the service is WORTHLESS! I made a lot of attempts to use the Net use syntax to create a batch file to overcome this non-functional raw application. I would really appreciate someone who actually had this issue resolved and work. I have looked at all the Windows files on the XP machine, searched the registry about a possible switch, which could make the necessary changes and have made all necessary changes on the Windows 7 system to accept the mapped network share. Help!

  Hello

  Since you have a network with different OS' I hope that Win 7 is configured to run on asnetwork work.

  If evry thing is configured properly it can be a problem of how your router keep information network. With the help of Staic DHCP or IP static on computers could help solve the problem.

  Just in case you need to reconfigure your network.

  ---------------

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall isactive .

  Since you have a network with Win 7 and the other version of Windows, you must configure Windows 7 as work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  * Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  -----------------------

  Jack MVP-networking. EZLAN.NET

• Windows xp pro sp3 will not start corrupted boot.ini and hal.dll - please help

  I installed Norton 360 offred via internet was last updated.  It immediately launched all applications previously disabled at STARTUP in msconfig.  And shortly after he started to gives me the blue screen "to the death".  This done in two days, and I was desperately trying to solve the problem by turning off almost all applications critical to running Windows XP Pro SP3, Norton and Office 2007 Home and student.  I even went and tried to edit the Boot.ini file in startup and recovery under the Advanced tab in the workstation properties.  Now all I get is an error message Windows cannot start because the hal.dll file is missing or damaged.  I replaced it by copying a modified version of the boot sequence, while the hard drive of my laptop was enslaved to my desktp PC, but nothing helped.  I can't even the Recovery Console to start on my laptop.  I need HELP, please.

  These profile errors are usually caused by one of the following:

  1-profile corruption.  The user profile is damaged and that Windows cannot load.  To resolve this issue, create a new user profile and move your files to the new profile.   See here for more information:

  How to copy data from a corrupted to a new profile in Windows XP user profile

  2 drives or corruption of the file system.  Run chkdks /f on the volume C:.  Please note that there is ALWAYS a risk of data loss when chkdsk is run on a volume, ideally, you should have a backup of your files before running chkdsk.

  3 - virus or malware activity.  Some of these parasites can revoke your permissions on the folder of your profile, check the permissions on "C:\Documents and Settings\Andre" and make sure you have a full control on the folder.  Check this box until you try #1 or 2 above.

  Some of these parasites can also revoke your permissions in key areas of the registry and create real Dany on the machine that can prevent you to run some of your software.  Use Regedit to load your old profile hive (NTUSER. (DAT) in your profile folder (C:\Documents and Settings\Andre\NTUSER. (DAT) and make sure you have full control over the key.  In the advanced security settings to ensure that the child objects are inherit permissions from the parent and put a check mark on "replace entries permissions for all child objects...". "Click on apply and OK your way out.  See here for easy to follow instructions for loading and editing of remote registry hives: http://www.rwin.ch/xp-live/regedit.htm make sure you unload the hive when you're done, otherwise the changes will not be saved.

  These parasites can also revoke permission on the other key of registry and system files, you can use SubInACL to restore your permissions on these key objects, see here for more information:

  Solve installation errors using the SubInACL tool to repair the file and registry permissions

  John

• My Windows XP pro would not let me change the option 'Use the home screen', so I removed a vital .dll file. I can't start Windows now!

  My Windows XP pro would not let me change the "Use welcome screen" option under: user accounts/change the way users connect or power off.

  He gave a message to the effect (I forgot to write it!) "a recently installed program does not change this setting. Search in the file named "RtlGina2.dll for a clue. So as silly as I can be, I did a search, finds the file RtlGina2.dll in the Windows/System32 folder and cut and paste on my desk. My thought was to isolate this file to see if it will address the problem of not being able to change the option use Windows screen.

  Now, I can't run Windows! It gives a message that this file RtlGina2.dll is not found! Specifically, it says, User Interface failure. The UI for logon RtlGina2.dll DLL failed to load. Contact your system administrator to replace the DLL or restore the original dll.

  How can I replace the dll if I can't even get started? Help, please! I know just enough to get me in trouble I see.

  WyoPathfinder,
  Are you able to boot mode safe mode with command prompt?  If Yes, then you can search for the file "dir /s /a RtlGina2.dll" lists the location where you moved to.  Then you can just copy (path\filename) c:\Windows/System32\(filename)

  If you do not work in safe mode, then you can boot from a XP disc and go into the recovery console and do the same thing.

  Hope that helps. QQ learn manage!