Folder would not found error - Please Help, do not want to re - edit ALL!

Similar Questions

• EXT_framebuffer_object extension is not found error. Help please

  After that I took my computer to "sleep" mode I get the EXT_framebuffer_object extension is not found error. Help please!

  I have been unable to return to my other account, but anyway... My computer crashed and I had to get a new hard drive and now it doesn't have the problem more.

• Jam - HP Officejet 8500 pro error - please help, deployed without return option

  Jam - HP Officejet 8500 pro error - please help, not deployed to M.E. no return w/lovely HP option

  I have a month old HP Officejet 8500 Pro, which suddenly give a paperjam error message.  There is no paper jam.  I spoke with HP Technical Support making long resets even blow the bowels to air without result.  It must be a simple mistake.  I saw it reported on other boards, but it seems that everyone is simply trading on their printers.  Not an option, like HP, in their infinite wisdom will not replace a defective unit overseas.

  I thought that there is a paper feed guide that hung above the paper tray.  It's hangin' is low... but maybe I was mistaken. If I tilt the printer back it will feed and eject a page, but not print.

  If someone at HP would be so likely to enlighten me I would willingly do what is necessary to take part, or whatever...

  Help... Help... Help...  Thank you...

  Here is a link that will help you.
  http://goo.GL/vxhuH
  
  It may be a sensor that went bad in the printer that generated the message.

• VMware Workstation Installation ERROR Please help me

  Installation ERROR Please help me

  

  my system:

  

  Welcome to the community,

  In the error message, I guess you have a kind of endpoint protection software installed, which blocks access to the registry Run keys!

  André

• 213.5 error please help me get the DW works again. Thanks CaptJim4685

  I have a Mac OS 10.10 used the Migration Assistant to move all the files from the old computer to new computer yesterday. Now can't use my Dreamweaver CS 5.5 I have my original installation disk. Tried that. Get the 213.5 error please help me get DW works again. Thanks CaptJim4685

  In my experience of software migration from one machine to another rarely works.

  Use the tools CS cleaner to wipe all trace of DW in your system before reinstalling.

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

  Disabling an old product is necessary if you previously had it installed on 2 machines.  If you did, you need to contact Adobe customer service to disable your old facilities so you can activate the last being.

  Contact the customer service

  Nancy O.

• U44M1I210 error, please help!

  When I try to install the updated from CC to CC 20141 2014 I get a U44M1I210 error, please help! Updates worked fine through the front console.

  Hi Denisz,

  Please follow the suggestions mentioned in the article below and check if that helps.

  Error U44M1I210 | Install updates

  Let me know where you always get the same question.

  See you soon!

  ~ David

• Can Hi anyone please help? I want to subscribe to phtoshopCC so I decided to download the free trial version first, but I downloaded it, but when I open it a sign comes up saying that photoshopcc has stopped working. My computer is compatible with the sys

  Can Hi anyone please help? I want to subscribe to PhotoshopCC, I decided to download the free trial version first. I downloaded it, but when I open it a few seconds see a sign indicating photoshopcc has stopped working. My cell phone is compatible with the programme but I only 1.80 ghz is this a problem? I saw that you have 2.0 ghz to run the program, but people have told me that it should work on my laptop?

  hiughkhk, I assume you are using windows 7 or newer.

  Navigate to C:\Program Files\Adobe\Adobe Photoshop CC 2014 - location of the folder in your computer and delete the file named "sniffer" and try to launch the Photoshop CC 2014.

  If you are still having the same problem, please provide newspapers in the event viewer for Photoshop.

  Please use the link on how to view the event logs in the observer of events below.

  http://support.Microsoft.com/kb/308427

  Control Panel > system and security > administrative tools > event viewer > expand windows Logs > Application > search for error or red for the failed module.

  Thank you

• error starting buvoemd.dll: "the specified module is not found." (please help. some of my games have not worked since this error has been appearing after start)

  This error has been appearing after starting:

  "Error loading C:\WINDOWS\system32\buvoemd.dll".

  The specified module could be found.

  Can we fix this or send me a copy of the module or anything like that?

  (please help some of my games do not have given that this error has been appearing after start)

  Thank you

  There is no file with this name in Windows XP.  It was probably part of a virus or spyware infection that has been partially removed. Run a full scan for virus/spyware.  If the problem persists, use the free Windows Sysinternals Autoruns tool to find and remove the reference to the file.

  For more information about how to use the Autoruns, please see:

  Autoruns for Windows Windows Sysinternals Autoruns Forum

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Stop action does not (and other errors) Please help!

  Hi all

  This is my first attempt at an interactive chart with flash professional.

  Work on a Mac (OS 10.8.5), Flash Proefessional CC.

  I created 6 frames, and I'm ready to start the animation. I want users to be able to click on one of the 5 buttons on the first image, this will lead to a corresponding frame that contains a bunch of buttons that link to external sites. Each of these images, there is also a button that links users to the first image.

  This should be very simple.

  The problem comes from the GET very go, I can't even control stop working [stop();] so when I test (Enter cmd), he just continually travels 6 images.

  I saw a forum where someone said that if there is a flash error will just ignore the script and scroll through the images. It seems really weird to me that Flash would just ignore if there is only one error in the script. Is this really the case?

  I had a few mistakes, but looking around on other forums I didn't understand what they meant.

  Here's what came:

  Supported text is limited. It is generally recommended to include the text as HTML (see DOMElement) elements. (125)

  Radial gradient (not oval) circulars are supported only.

  In EaselJS frame numbers start at 0 instead of 1. For example, this STOP button and gotoAndPlay calls. (3)

  Happy with the two Bitmaps and buttons can generate errors of local security in some browsers to run from the local file system.

  So I won't be able to do anything whatsoever as long as one of these erros occur? If this is the case, other than Googling through a bunch of forums that may or may not explain things in language I can understand, does Adobe offer a resource to help users resolve specific errors? Another that the gradient, I have no idea what one of these facilities, and the search thorugh the forums did not help.

  What I'm trying to do should be very simple, but it gives me a lot of trouble. I went through a lot of Lynda tutorials, tutorials from Youtube and even Adobe Tutorials and I thought I was ready to start add actions, but obviously I'm missing something fundamental. Please help me!

  See you soon!

  Patrick

  I made an animation from scratch and everything has been published on very well until I added an audio file with a very long name - then I got the white screen. I removed, shortened, reimported it and viola... I had images- and his! Yay.  (I downloaded your file. Just shorten the library names did not do the trick.)

• Print the following spooler & RPC:When instructions from Microsoft to correct the 0x000006ba error I then get error 1068. Have spent hours trying to solve this problem and support web Microsofts is not useful at all - please help - I just want to be able

  Print spooler 0x000006ba and 1068 error messages

  Try the instructions and links provided by the spirit in the following thread shows to see if they help (or differ from what you have already tried):http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/ef6ac932-a6cb-48cb-a56b-de5b1443df87.

  If this does not work, what is the manufacturer, the brand and the model of printer that you have (and all that you had previously installed)?  What version of Vista you have (for example, 32-bit Vista Business SP2)?  How the printer is connected (1 LPT, USB, ethernet, wireless, network,...)?  Please report the exact error messages you've been making word - that they can help us find the cause because there are reasons a bit that these things could happen and we have to understand the situation better than to offer a more targeted solution.  For example, what is a Lexmark printer (or have you ever had a Lexmark printer)?  There is a particular problem with these printers and a fix for the problem but I don't know if this is the case here and do not want to waste your time on something that does not apply.  There are other examples, as well.  We understand the situation, the better we can help you.

  I hope this helps.  If this isn't the case, please provide a lot of information that you can including the answers to all the above questions and anything else that you think might help.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• ORA-01403 no data found cursor error - please help.

  DECLARE
  Name1 talent.candidate_name%TYPE; -Declaring variables
  long name2; -Declaring variables
  emp_id talent_id.emplid%TYPE.
  EXCEPTION NO_DATA_FOUND.
  
  CURSOR c1 IS
  Select candidate_name,('''||) Trim (Upper (candidate_name)) | "') as tst of talent;
  BEGIN
  OPEN c1;
  LOOP
  FETCH c1 INTO name1, name2;
  OUTPUT WHEN c1% NOTFOUND; -TRUE when FETCH can't find none online
  
  Select distinct emplid
  IN emp_id
  a names
  where a.name_type = 'PRI '.
  and upper (a.last_name) | ',' | Upper (a.first_name) = name2;
  
  
  INSERT INTO talent_id VALUES (emp_id, Name1);
  
  END LOOP;
  
  CLOSE c1;
  COMMIT;
  
  
  
  
  
  Question: Above queries ask me the msg of error ora-01403 no data available for emplid. I try but fail to solve. Please help me. Thank you
  
  Published by: user12051088 on March 4, 2010 01:38
  
  Published by: user12051088 on March 4, 2010 01:40

  This unique INSERT could possibly end up with all of your pl/sql code!

  insert into Talent_ID (Emp_ID
                        ,Name1)
                  (select distinct
                          a.Emp_ID
                         ,t.Candidate_Name
                   from   names a
                         ,Talent t
                   where  a.Name_Type = 'PRI'
                   and    upper(a.Last_Name || ', '|| a.First_Name) = trim(upper(t.Candidate_Name))
                  )
  /
  

  Keep in mind, there is no way for me to test it! Furthermore, TALENT_ID is a strange name for a table. Probably typo but simply change the INSERT statement accordingly!

  P;

• Downloaded a zipped file/folder would not, the name is too long.

  I have downloaded a compressed file/folder to a trusted site that I always. I unzipped the file (Music mp3) successfully and added to my itunes. When I tried to drag the file of music on my ipod, itunes shows his location could not be found. I went and checked on the folder I unzipped and all these other files with weird characters appears. It took 145 GB of space in my external hardrive (thank goodess). Now, I can't rename or delete the file or the folder itself. I tried a few removal tools but it did not work or when I try to download, my anti-virus software reports me. I need a way to get rid of the file. The budget is tight, so it would help if it's freeware. OR better yet a way to removed without having to download any software. I tried to delete it in safe mod and BACK. Without success. Tried Unlocker and D something software too.

  Have you tried Unlocker which would have been my first recommendation.  I don't know other programs (especially turned to the long name) free file deletion. If Unlocker doesn't work, or none will remove utilitly in Vista (because Unlocker is better than Vista).

  The commercial product ($19 I think) says that he specifically deletes files whose names are too long. http://www.abtollc.com/Folder-Delete.aspx.  I suspect that this will do the trick, but of course I can't be sure so try there is a risk that it will not solve the problem in spite of spending money on it.

  Your problem with the file may be a permissions problem.  Make sure that you have the permissions of all rights and take possession (and maybe both parent folders).  Don't forget to check the Advnaced properties for special permissions that restrict rights or inherit permissions from parent folders - you may need to remove if you already have all the rights on the main screen.  Here are the procedures:

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  You can change now switched to read-only (even if the main folder indicates that they are always read-only - you can access yourself as the owner).  You can keep them in read-only to other users, customers and administrators even (although they can support themselves and access, if they wish, and it is really not that you can do to stop it except protect the file with a password by using a 3rd party product.)  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  I have no other suggestions at this point.  What is the EXACT and the full path of this folder?  Depending on where it is, we are able to create a new user profile (treat your as if it is corrupted) and traansfer all data EXCEPT the folder in the new profile.  Then delete the old provile if he leaves despite this file - it might or it might not (I'm not sure).

  To try this http://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profileuse.  If that is the only available Administrator Profile (you need to be an administrator to fix this), enable the Hidden Administrator Account (HAA) using http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?&lang=en&cr=US&guid=&sloc=en-us&dg=microsoft.public.windows.vista.administration_accounts_passwords&p=1&tid=d20f9db4-7b2c-48be-a087-7835dc2a9055&mid=d20f9db4-7b2c-48be-a087-7835dc2a9055.  If you don't remember the password, try nothing because that's probably what you (or seller) did during the installation.  Once that is done, don't forget to disable the HAA to save it in case it is necessary once again and for safety reasons (since people often try to hack into systems using this account).  Do NOT use the HAA as your administrator account because if you lose the only administrator on the system account or it is damaged again, then you're watered.

  You can also try to enter in a command prompt: click on start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.  There Cd type a space and then type the path of the fulll name the folder in question (if it even appears).  Once inside the folder type del *. * and see what happens.  It can give you the same error message, or it can remove. Once the content is deleted type cd, and then type del (yes I know it's long) and enter. This can remove the folder.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have an error, missing wxmsw262u.dll and I don't know how to fix this error, please help.

  Try to find a solution to this problem and do not receive the case? I have read that I need to get the file off her recycle bin but that is empty. My PC Tools has been clean the tray for me is not that nice. I tried a recovery tool, but the file has disappeared for a long time to recover. I have the game Unreal Tournament 3 abd she needed a server crash bu patch that he would charge not because of the missing dll file. I can't play my game and I'm going to cry, I.; m 57 years and don't have a lot of time left in the world so please help me soon.

  Hello

  There is a long list of things to try to solve this problem

  you have to work your way through them

  http://pcsupport.about.com/od/findbyerrormessage/a/wxmsw262u-DLL-not-found-missing-error.htm

• Application not found error-choose the program you want to use to open this file

  Soon all the world.

  I really hope that someone will post a reply to my question as soon as possible. I will try to be as descriptive as I could possibly, in order to solve my problems.

  The main problem is that I can't open some, if all the program files, applications on my windows 7, 32-bit laptop. I'm constantnly get application not found error, showing in a small window address, I was trying to do. Whenever I want to open a program, like the Adobe reader, word of microsoft, excel, mozilla firefox, google chrome - basically everthing, a window opens and is telling me this: choose the program you want to use to open this file: file: acad.exe... and recommend me acrobat from adobe program, any program I was trying to enter (in this case autoCAD).

  Cannot open cmd, when I go to system recovery, it says: System Restore could not start. I normally post records in: C and: D sheet music, play music, watch videos and see photos. I found a "hole" not being able to go to the internet via a browser. I discovered it when I went to an online help in some of the trobleshoots. It would open tab in google chrome by itself and then on it, I can browse the internet normally, but only through the said track.

  Currently, the microsoft security essentials performs a custom analysis (: C and: D), because I suspect it is a malware, or some kind of virus. It happened when I tried to download a program from CAD Solidworks 2012 via a site that I'm not sure I'm allowed to mention, that I don't want. Unless it's okay with you :) It begins with a letter t. By the way, I noticed that my: partition D has accumulated 10 GB + more in the space of a few days, because I remember two weeks ago I had close to 70 GB of free space, now it's about 56.3 GB. Curious, because I know that I did nothing so great in this period. Maybe I need to tell you that I get this window, from time to time, when I browse the internet (I never visit suspicious sites, or at least I don't me remember more I visited one in a very long time, like 4-5 months):

  [url=http://canadaalltax.com/z/?f=pjrKrjr7vTw8qi5FrTxXrjr4qdgHqjrHqE%3D%3D&eid=727&hid=15769845847361013151&pid=0&ch=666&rf=http%3A%2F%2Fwww.boldride.com%2Fbrand%2Fwilliams-racing&s=px.pluginh&r=0.13960388134319002]http://canadaalltax.com/z/?f=pjrKrjr7vTw8qi5FrTxXrjr4qdgHqjrHqE%3D%3D&eid=727&hid=15769845847361013151&pid=0&ch=666&rf=http%3A%2F%2Fwww.boldride.com%2Fbrand%2Fwilliams-racing&s=px.pluginh&r=0.13960388134319002[/url]

  I found this in my story, be very careful what you do with this link, I don't want that take you anything ;)

  That's on my side, please ask anything and everything, I'll visit this page when I can.

  Good bye!

  P.S. forgot to mention that when I download a program (mozilla Firefox), I can not run it due to: Application not found. I hope I found the right place for it.

  Original title: Windows 7 - Application not found. A big problem or easy-peasy?

  Hello

  Thanks for posting your query in Microsoft Community.

  1. What is the complete error message you get when opening a file?
  2. What happens when you try to open the command prompt?
  3. What happens when you try to access the internet by using Internet Explorer?
  4. You did changes to the computer before the show?

  According to the description of problem errors you get "application not found error" and "choose the program you want to use to open this file" and not being is not able to do system restore, it seems that some windows file is corrupted. I also suggest you to post back the results of analysis.

  I would suggest trying the following methods and check if this is useful:

  Method 1:  Run SFC scan and check for corrupted Windows files and violations of integrity.

  Use the System File Checker tool to repair missing or corrupted system files

  http://support.Microsoft.com/kb/929833

  Method 2:

  For any question, where his prompting you to select the default program
  Try to set the default values for the program
  Change the programs that Windows uses by default
  http://Windows.Microsoft.com/en-in/Windows/change-default-programs#1TC=Windows-7

  For any question, where you are not able to download and install firefox, download the file and save it and then try to install firefox.

  I hope this helps. Please let us know the results. Feel free to write us again for any help.

• SQMAPI.dll and load on Vista error Please HELP!

  After restarting my laptop to factory settings I get 2 errors.  I have Windows Vista on the computer on which the errors. The first error occurred just after the "preparing your desktop scene" and he says, ' error loading C:\Program may Explorer\iessetup.dll "and the second showed upward after that I tried to install SP2 and it says"SQMAPI.dll is not found"Please help me in correcting these errors.

  The other post:

  When I ran that he stopped at 72% and said "Protection of resources Windows could not perform the requested operation." I have Windows Vista on the computer on which the errors. I get 2 messages after I tried to restore my computer to factory settings. The first sets out, "error loading C:\Program may Explorer\iessetup.dll" and the second says "SQMAPI.dll is not found" Please help me to correct these errors.

  Hello

  Did you change your computer?

  I suggest you to follow the links and check out them.

  Method 1:

  Step 1:

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  Step 2:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 3:

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

  See also:

  Learn how to install Windows Vista Service Pack 2 (SP2)

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2