Followed ADF connection failure

Similar Questions

• Windows 7 professional - connection failure: unknown username or bad password.

  I have new xps computers 8700 identical Dell running windows 7 Professional.  The new dells replace the old dell dimension computers Windows XP Edition Professional.  I traced a drive 'f:' of network easily to my server from windows 2000 of the first Windows 7 Professional machine.  But when I tried to map the "f:" network drive on my windows 2000 Professional 2nd new windows machine Server 7 I got the following message: "connection failure: unknown username or bad password."  The computers are identical.  After the introduction of the first professional machine of windows 7 with success and mapping the drive "f:" on my server, I cloned the drive hard so that all my apps and settings would be the same on the second Professional machine of windows 7.   I tried to change the 2nd windows 7 professional name of the computer, but I still regularly get the "connection failure: unknown username or bad password."  Any ideas or suggestions would be greatly appreciated.

  Thanks in advance,

  Ken Preston

  Hello Ken,

  Thanks for posting your question on the forum of the Microsoft community.

  The issue you mentioned will be better suited for the public of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet Forums.
   
  TechNet Forum
  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Thank you

• Connection failure: unknown username or bad password

  I use Thunderbird without problem for businesses for nearly eight years. I currently run at the top of a tower with Windows 7 Pro. There is only a single account/e-mail address on Thunderbird.

  This morning when I went to check my e-mail I have my password is requested, then received the error 'sending of password did not. Mail server exchange.company.com replied: connection failure: unknown username or bad password. "I retried the password, restart Thunderbird and tried again, but still not received the same error. I sent an email from Thunderbird test which was very good. I am also able to connect to the server via web browser and I am able to send and receive emails on my mobile device.

  I erased all the saved passwords of Thunderbird and I checked account settings, but I am still unable to download any email Thunderbird.

  Apart from the deletion of the account, I don't really know what to do here. Any help would be appreciated! Thank you.

  The problem has been resolved. Apparently the POP stack had to be reset by the side of the Exchange.

  I hope this helps someone in the future...

• ERROR: Connection failure: unknown username or bad password

  Whenever I want too run a .exe field or a program that requires administrative permissions, I type my password using the account control user, but instead of just let me through it come up with this error:

  Connection failure: unknown username or bad password.

  I searched for fixes, but have not found one that works.

  This was a very big problem I am a player computer and all the games I have, have the administrative sign (shield) and or are .exe files.

  This has happened for about 3 or 4 months now... It really gets me upset. Since there is no way to shut off User Account Control (UAC) without opening UAC itself...

  I'm running on a:

  Manufacturer: Acer
  Model: Aspire M1201
  : Processor Dual-Core AMD (tm) 8550 2.20 GHz
  Memory (RAM live): 3.00 GB
  System type: 32-bit operating system

  http://www.Petri.co.il/disable_uac_in_windows_vista.htm

  Read method 1.

  See you soon.

  Mick Murphy - Microsoft partner

• Recording connection failure attempts

  Someone at - he found a way to get information about connection attempts that have failed where people enter the wrong username/password name? We use the secure gateway and I enabled database. I looked through the database but couldn't find anything by recording connection attempts that failed.

  Hello

  Unfortunately, vWorkspace do not keep track of connection failures, you need a product that collects this information from the event log and stores them for you to review later as Administrator Active or change auditor for Active Directory.

• ISE max connection failures

  In ISE, is - anyone know if the tally for the failures of maximum connection for accounts invited (found under settings > comments > political portal page) is one per session or cumulative setting during the lifetime of the account? The County never resets and is there a way to display the current number of connections that have failed?

  Our use case, is that we have guest accounts that distributed to multiple hosts (for example for a hosted conference or special event). We had a couple of this type of accounts get suspended because of hitting max connection failures. We have increased the adjustment, but I would like to understand the parameters more has some of the guest accounts must apply to a significant period of time.

  This is per session, when logged in successfully, the counter is reset.

• Unable to connect to a Samba file server. error "the connection failure: unknown username or bad password?"

  Original title: I can't connect to a server to Samba from Windows 7 files

  I used to use a Mac machine to connect to a file server Samba as smb://myfileserver.mycompany. Now I use a PC with Windows 7 Professional and when I write the address on Explorer as \\myfileserver.mycompany it opens a pop-up to enter my credentials, but when I put my authentication information and click ok, it reminds me the pop-up to try again with a message stating "connection failure: unknown username or bad password.'. '.

  I tried several times but still the same result.

  Is there another way to do this?

  Is there a third party app that will do this job?

  Thank you.

  Hello

  (1) is the computer connected to the domain?

  (2) is the issue specific to your username and password?

  (3) tried to connect from different computer?

  If the problem is specific to your username and password please contact the it Department for assistance.

• How to turn off the message waiting after a connection failure?

  Hello

  I'm testing a new login process. Sometimes, I can not connect due to bugs in my procedures.

  
  

  On the login screen, there is a connection message that makes you wait 5, 10, 15 seconds etc after a connection failure.

  
  

  I don't want no waiting to connect again.

  
  

  I use APEX 5.0.3 with Oracle 11 GR 2
  

  
  

  Best regards.
  

  The connection limit is to reduce the risk of denial of service attacks, and therefore it is not recommended to disable this feature.

  That being said, you can turn off the countdown to the instance level and not at the level of the application.  Connect to Oracle Application Express Administration Services. Click manage an Instance from the drop-down list level, and then select Security. Click on the authentication tab, and then under global settings, to 'delay after connection attempts that failed in a few seconds', enter 0 to disable the countdown and allow immediate access.

• Host connection failure: VMs, warehouses of data inaccessible (in gray)

  Hello everyone,

  I have 1 ESXi host 5.1 throwing alarm: host connection failure. Al a SNMP trap for the entity has been sent.

  I have 10 servers ESXi 5.1 all the amanged by 1 5.1 VCenter server.

  8 ESXi servers belong to a cluster HA and 2 are not in a cluster.

  The issue I'm facing is with 1 ESXi host that is outside the cluster.

  The virtual machines on that host are powered OFF. I am not able to turn on. I am not able to Vmotion them. However, if I remove them from the inventory and add them to the inventory on a different host running, VM works very well.

  Shared on this host data warehouses show Greyed out as well except the local data store (VMFS). I have 1 VM on the local disk of this host and I can power ON the property. But all other virtual machines are the shared data store (NFS - Netapp) and I can not turn on this particular host 1.

  Same data warehouses (NFS - Netapp) are shared with the other 9 (Clustered and nonclustered hosts) ESXi hosts and data store is fine and detected by all hosts.

  I tried to reboot the host several times but without success.

  Can someone please share their expert advise on how to fix this?

  Please see the attachment for details of esxi host does not.

  Thank you

  AG.

  Hello

  Yes, you can remove and install it again, Siu here below KB

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1005057

  Concerning

  Mohammed

• ADF connection does not happen after logout

  Hi Experts,

  I use the jDev11.1.1.5 version. I have a scenario where I need to connect and disconnect users. Its working fine. But my problem is when I logout in the page, I am not able to connect to the rear. If I restart the browser I can connect. How can I solve this problem.

  I use ADF connection security

  Please find my disconnection below code:

  	public String onLogout() {}
  	System.out.println ("inside onLogout");
  	FacesContext fctx = FacesContext.getCurrentInstance ();
  	ExternalContext ectx = fctx.getExternalContext ();
  	String url =
  	ectx.getRequestContextPath () + "/ adfAuthentication?" Logout = true & end_url = / loginpage.jsp;
  	try {}
  	ectx. Redirect (URL);
  	} catch (IOException ioe) {}
  	System.out.println ("IOException:" + IOE);
  	} catch (Exception e) {}
  	System.out.println ("Exception:" + e);
  	}
  	fctx.responseComplete ();
  	Returns a null value.
  	}

  Please help me to solve the problem...

  Thanks in advance...

  I solved the problem, made changes on my URL:

  String url = ectx.getRequestContextPath () + "/ adfAuthentication?" Logout = true & end_url =/faces/home.jspx';

• ISCSI connection failure causing ESXi 5.1 VMs at the stop

  Hi all

  At the hope that someone may have seen the problem that we encountered during the last 2 weeks.

  Our virtual machines are performing unexpected stops. Our Exchange Server rebooted twice today

  The closing time is information that we see our Equallogic logs:

  INFO APCEQLM1 09:35:19 7.2.15 26/07/2013. 7.2.24 | 7.2.29 session iSCSI to target '192.168.43.12:3260, iqn.2001-05.com.equallogic:4-52aed6-c7ca4349e-87b00217be35059e-lon-prod-vm-1' initiator ' 192.168.43.31:58797, iqn.1998 - 01.com.vmware:apcesxhost1 - 24c73c18 "was closed. | iSCSI initiator login failure. | No response on the connection for 6 seconds.

  We have 1 Equallogic PS4100X, run the latest firmware EQL 6.0.5. We have 2 switches Powerconnect 6224 stacked. Our table and switches are configured by DELL support.

  We followed the recommendations of DELL on vSphere storage ISCSI connection. I see that our vSwitches are correctly configured.

  Someone has any ideas why we find that this behavior? I have connected this with the support of DELL, but thought I would ask on the forums in case someone knows that it emits.

  Thanks in advance!

  Lee

  Hi Julie,.

  My apologies, I thought that I had updated this discussion with the fix. It was related to a problem of driver on one of our hosts. I logged a call with VMWare and they got the answer very quickly. The problem was our host NETWORK interface card tg3 driver. I've followed this article to resolve the problem:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2035701

  I hope it is of some use to you!

  Thank you

  Lee

• Connection failure

  Whenever I try to log on my side of the computer, I get this text which States:

  The user profile Service service has no logon

  User profile cannot be loaded

  Is it possible to fix this? I don't want to use the other side of the computer, because I have important things on my side

  Hello

  You can try the following.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 48 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  If none of the options above are successful, try to run the steps in the guide on the following link.

  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-Lo...

  Kind regards

  DP - K

• HP Pavilion dv6000: hp pavilion dv6000 HELP connection failure

  Hi my Mom can't connect to his laptop, when it based on his user name it says that the user profile service service has no connection. User profile cannot be loaded, is there a way to get around this?

  Hello

  You can try the following.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 48 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  If none of the options above are successful, try to run the steps in the guide on the following link.

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  Kind regards

  DP - K

• YouTube app on bravia kdl52xbr9 connection failure

  I'm having a problem connecting the YouTube app on the tv. I can search video fine, but cannot connect to see the videos stored in my account. I reset tv to factory setting. I tried to create a new YouTube account. I tried to create a channel by following the instructions from YouTube. nothing seems to work. I have the latest firmware. When I connect YouTube with username and put the password, quite of the application is just hanging there. nothing happens. any help is greatly appreciated. Thank you.

  
  

• Resolved by restarting sound/mic in Adobe Connect failure

  Hello...

  HP p6620F

  Windows 7

  For my work, I have to attend meetings in Acrobat Connect Pro by using sound and microphone. I use a Microsoft Lifechat headset/microphone. My sound & mic began to fail & problem was solved only by restarting my computer. The fix was to last a few hours at first, but began to take only about an hour. I work at home, customer service agent, and I count on my micro & sound. I'm having no problems at this stage of sound when you don't work - as listening to music or watching/hearing of YouTube videos.

  My supervisors insist that my sound card needs to be replaced, but I did not; mine is integrated into the motherboard, apparently. I have a backup computer that I worked out during 2 days with my current helmet, and it worked fine. It is the family computer and I have to do my work computer to the height.

  How can I fix without having to buy a new motherboard?

  Thanks in advance.

  TJ

  Hello tj777,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you are having problems with your audio cut on your HP Pavilion p6620f desktop PC and you need to get it repaired. There are some possibilities I can see that might cause this problem and so I would like to address all the.

  The first is possible overheating of the computer. To ensure that this is not the case, I provide you with the HP support document: reduce the heat inside the PC to prevent overheating, who will guide you through the steps to solve a problem of overheating when it exist or prevent it from happening in the future.

  The next possibility I see would be another process or application interfere with your audio files. Rule this out, I would like you to follow the steps in the HP Support document: Configuration using Microsoft System (Windows 7), which will guide you through the steps necessary to do what is called a clean boot. If the audio problem goes away after doing this then you most likely have a process or application causing your grief and you can use the 50/50 method to identify who it is. Simply reactivate the 50% of the process and see if it happens again if not you know that it is 50% and you can disable half of them and start to restrict the scope down. If it did not resume, you can do the same by the reactivation of the other 50% of the process. If it still does not start, then do the same thing on startup items until that refine you the guilty party.

  For the next opportunity we will use the HP support document: use Microsoft System Restore (Windows 7) to restore your computer to a point in time where your audio worked correctly.

  Then we'll install the Original Realtek High Definition Audio Driver, following the instructions I have provided below:

  Step 1. Download and secure to your office the Original Realtek High Definition Audio Driver listed for your desktop HP Pavilion p6620f running Windows 7 64-bit.

  Step 2. Click Start

  Step 3. Click on Control Panel

  Step 4. Click on Device Manager

  Step 5. Click on the sound and the game controllers

  Step 6. Right click on your audio driver

  Step 7. Select uninstall

  When you get invites you to remove the driver to do so.

  Step 8. Double-click the Original Realtek High Definition Audio Driver I had you save to your desktop earlier and follow the instructions.

  If none of the above works then we'll get a little more drastic to try to solve this problem by performing a backup and restore of your computer. Ince, this will put the computer to the original settings it will be either solve the problem or leave the possibility only left to be a hardware problem.

  To back up your personal files to ensure that they are not lost, I am providing you with the HP support document: backup of files (Windows 7), which will guide you through the backup process files upwards.

  CAVEAT! If you want to keep the e-mails or bookmarks/favorites that you want to save them as I do not think they are saved in the backup HP process.

  Once you are sure that your files are backed up, upwards, please follow the HP Support document: performing a recovery of HP (Windows 7) system, which will provide you with the steps to recovering your computer to the factory State.

  IMPORTANT - your staff of files such as libraries, personalization settings, user accounts and desktop themes are permanently deleted. The settings on the computer are returned for values by default (as it was when it came from the factory). All applications and software installed on the computer when it came from the factory are relocated, and their settings are reset to the default values. In addition, software, applications, programs, and everything you have installed or saved on the computer are deleted permanently.

  Finally, if the software above fixes do not work then I would suggest that you install a new sound card. It is true that your current card is integrated into your motherboard, but that doesn't mean not you cannot install another if necessary. You can buy his cards are most computer repair shops on online and they are relatively easy to install. The steps should be provided when you buy the sound card and like I said are not difficult to install.

  Please re-post if you still need additional support. Thanks for posting on the HP Forums. Have a wonderful day!