ADF connection does not happen after logout

Similar Questions

• Excite PRO 3G connection does not work after last update Android v4.3

  Hello

  I live in Italy and last Sunday (26 January) my excited PRO Tablet (model AT10LE - A - 10 H) received version Android 4.3.201121220.35.

  After restart my wifi works fine, all other app very well work, but my 3g connection does not work, mobile bar is empty and it says "no service".

  My sim card is ok. I used this sim card before the system update and I don't have a problem with Android 4.2.2.

  Please help me.
  Thank you

  > After reboot my wifi works fine, all other app very well work, but my 3g connection does not work, mobile bar is empty and it says "no service".

  Go to mobile network settings and search again for the 3G network.
  I had a similar problem with my Android Smartphone and my o2 provider
  I started to search for new, so I chose the O2 again and then I could solve the problem.

  In the case where this does not work for you, recommend you to reset the default Tablet (factory settings)

• Keyboard does not. Able to use for the connection does not work after that.

  The keyboard works to connect. But does not work after that.

  Hello Sml15,

  The embedded screen keyboard should still work even if the physical keyboard isn't.

  Try this first...

  Press and hold the Windows key and the space bar.

  If no joy, go to the search bar and with the built-in keyboard, type the filter keys and choose key filter on or off.

  In the window of the ease of access to the keyboard, disable FilterKeys.

  If all goes well, which will fix the problem.

  Let me know how it turns out.

• Network connection does not work after reinstalling Windows XP.

  Original title: problems with reinstalling XP.

  I had re format and re install windows xp but now my network connection does not work.  I have no IP address, even if my router and the pc are on DHCP. Device Manager tells me that the controller Ethrnet on the motherboard has no drivers, but I can't find a driver.  Any thoughts appreciated.

  Hi John Fisher_888,.

  You can download & install the drivers for the adapter from this link & check if it helps

  http://support.Dell.com/support/downloads/devices.aspx?c=us&l=en&s=Gen&SystemID=DIM_PNT_P4_8400&OS=WW1&OSL=en

  Hope the helps of information.
  Please post back and we do know.

• Automatic connection does not work after re - install

  Visited bad link in Facebook! Subsequently, forced to re - install Firefox - from scratch! Saved some files profile as Favorites, passwords, but no extension tricks. Re-installed FireFox after removal of ALL titles I could find in Program Files, Program Files (x 86) and Windows 7 Pro profile.

  When visiting a page that requires a login, Firefox correctly fills the username and password. BUT it does not start the connection. In the past, it was essentially a background process and not really visible to me. Now, stop at the page requesting credentials and click on the button "login".

  I have 'THE VIEW', 'NOSCRIPT' and 'ADBLOCK PLUS '. ALL my plugins are in mode 'ask to activate '.
  I enabled extensions: 'ADOBE ACROBAT - create PDF 1.2' and 'Trend Micro NSC FireFox Extension 5.82.0.1056.

  I would definitely get FireFox to work as it did previously. I don't know where watch/tweak!

  Thank you
  WLPeavy

  Thank you. It was the cookies which were to be saved. I had no idea of the automatic logon which is recorded. Thanks again.

• Ethernet connection does not work after the decommissioning of 10 Windows 7

  retruned to Windows Professional 7 of 10.  everything seems to be OK except my connection Ethernet does not connect.  I can connect wirelessly.  Windows troubleshooting tool does not resolve the problem.

  How can I get the adapter to work?

  Go into Device Manager and uninstall your wired NIC.  do not remove the drivers.  Right-click on the name of your computer (above) and select "Search for hardware changes."  This should re-install the drivers for the network card.

  HTH

  Ron

• MFP M175nw + Speedport W 724V (Telekom) - WIFI connection does not work after replacement of the router

  Hello community,
  
  My parents at home to replace their router with a newer model (Speedport W 724 V Telekom, German) due to an electrical fault.
  
  Until printing today via WIFI on the 100 HP LaserJet M175nw MFP color worked like a charm. But now, there is no link with the new router via WIFI and it is not possible to connect by using WPS (they really tried everything). Just connect and print via USB in Windows 7 works... But they need to print from iOS (iPad) devices.
  
  I went through the terrible (long) manual - to discover that it may be a problem with the WIFI (ad hoc/infrastructure) connection method. But my parents were not able to change this method.
  
  I would therefore ask you help on the following:
  -How can I change the method of connection and connect the printer using WPS?
  -How can I reset the printer completely (reset to default values)?
  -How to print the configuration menu? I googled and it said to push the Cancel button (X) for more than 5 seconds to print this page. Is this correct?
  -How to find out the IP address of the printer to access webadmin interface? I have now, there is a, because it is mentioned in a ubuntu forum: http://ubuntuforums.org/showthread.php?t=2193532
  - And finally: how to do a firmware update? It seems that there is a newer version available on that model and some said that connection problems could be resolved by upgrading the firmware.
  
  Please answer detailed possible, as I don't have much experience with Windows & PC in general.
  
  Thank you all for your support
  Dominik
  --

  Hi DominikBach ,

  Here is this document in German for you. At the bottom of the left side of the page, there is a drop down to select the language next to the country.

  The Druckers as ein kabelgebundenes oder ein Drahtlosnetzwerk einrichten.

  Thank you.

• Internet connection does not work after the virus scan

  Hello

  I recently did a virus with Adaware scan and now I can't connect to the internet. I guess that Adaware muts have deleted or changed a file that prevents me to connect. When I try to access Internet, french IE or Opera, screen pops up saying that it cannot access the internet. On the connection to the Local network, the State says "network address will acquire necessary", but this indefinitely and never connects.

  Thanks for any help on this. At this moment I am my work computer internet access.

  Niall O'Connor

  Ad-Aware is not an antivirus application, so chances are that the computer is still infected.

• my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  Once iTunes to work properly, you should be able to fix your device.

  TT2

• Satellite x 200: Webcam does not work after I have connection on Microsoft messenger

  Hello everyone

  I have a Satellite x 200 SLI and for some reason any webcam does not work after I login on messenger... Even when I disable messenger and even disable internet... it still does not. Only when I restart the operating system.

  Anyone has an idea on how to solve this problem?
  Already did the updates but still, anyway.

  Hi Gabriel

  Check it out!
  I noticed several discussions on this issue, it would be really interesting to know if the SP1 fixes this annoying problem

  Your comments would be appreciated

• App Store does not work after upgrade to 10.11.2

  Hi guys,.

  A day after Mac OS X El Capitan 10.11.2 came out, I installed in on my MacBook Pro 15 "retina mid-2014. After you install the updated AppStore has stopped working.

  I see that some update is available (both of badge on AppStore icon and label "1 update" icon in the Apple close menu 'App Store' menu), I am able to run applications AppStore without any problem, asked a password for AppStore at some point, but when I run AppStore, what I see is an empty window with a toolbar , logo of the AppStore in the middle and a cone running right beside 'back' and 'forward' buttons on the left side of the toolbar. It does not matter what section of the toolbar, I chose (featured, Top Charts, categories, purchased or updates), nothing happens, spinner is continue to run and does not stop after doing that again for hours.

  Is that what someone has any ideas what it could be and how I can get my AppStore rerun?

  Thank you!

  Please test after taking each of the steps that you have not already tried it. Stop when the problem is resolved. Back up all data before making any changes.

  Sometimes, the cause of the problem may be an Apple network, whereby failure cases none of the steps below will have no effect. You just have to wait for the failure be fixed. This should rarely, if ever, take more than a few hours.

  Step 1

  Connect to the App Store by selecting Sign In in the Store menu. If you are already connected, disconnect and then reconnect.

  Step 2

  Log off or restart the computer.

  Step 3

  Remove or disable 'LittleSnitch' or any other third party software like that blocks outbound connections to network in accordance with the instructions of the developer.

  Step 4

  Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  After testing, restart as usual (not in safe mode).

  Step 5

  If possible, connect to a different network and test.

  Step 6

  Reset the NVRAM.

• HP Probook 6465b: Broadcom 4313gn does not work after the upgrade to Windows 10

  My laptop is HP Probook 6465b (model 2012) it came with Win 7 Pro pre-installed.

  I upgraded Win 10 and after that a Wi - Fi connection does not work. Then I tried the new facility, but it's the same thing.  I have come back to Win 7, but I would like to upgrade Win 10 if I can get the WiFi adpter for work.  My laptop otherwise works fine and it is not that old so I am confused why this wi - fi adapter gives me grey hair.

  Here is what happened:

  Just after upgading wi - fi works very well until the first stop. After reboot, free WiFi does not work and there is no wi - fi adapter in Device Manager. However, it's there, but it is hidden.

  I tried freezing and relocation of the map and I downloaded the latest drivers from HP Support, but I can't get the adapter to work.

  To get the internet to work I plugged USB wi - fi adapter and suddenly the WiFi Broadcom card started working also. She even worked after unplugging the wi - fi USB adapter but after reboot internal wi - fi adapter was missing again well (hidden and does not), it is too compligated to do each time and she even does not work every time, just every now and then.

  Any suggestions?

  pavis

  Please install the driver it works with the Windows 10

  WLAN

  Qualcomm Atheros QCA9000 series Bluetooth 4.0 + HS driver

• computer does not start after the Windows XP logo window

  Windows xp home edition
  service pack 2
  Dell inspiron 1501

  1. computer does not start after the Windows XP logo window
  2 works well in safe mode, even connect to the external monitor
  3. I reinstalled xp many times, problem stil exist.

  All the answers?

  Hi dhanushm,

  1. What happens after the Windows logo screen?
  2. You receive an error message?
  3. You have security software installed on the computer?
  4. Have you performed an installation clean Windows XP and even after that this problem exists?

  Method 1

  As the computer starts up fine in safe mode there is a possibility that some third-party programs installed on the computer is the origin of the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

  Method 2

  If fails it above step can refer to the article below and try the steps mentioned, check if it helps.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

• My battery does not load after my Vista laptop off for 3 months

  my battery does not load after having my laptop for 3 months

  * original title - after a 3 month vacation my battery not charging *.

  Hi jimycaan,

  1. How are the battery once the power is discharged?

  2. what happens when you try to connect the laptop to the main supply and work on it?

  You can update the BIOS and see if the problem is resolved. Follow the steps mentioned in the article below.

  BIOS: Frequently asked questions

  Note: Change to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  You can also consult the following link for more information:

  Solve battery problems

  Hope this information is useful.

• Why my wifi connection does not work correctly?

  I had problems with my computer for a while. The first problem I had was that after I hibernated my computer it would be even not show me internet connections. I discovered that the hibernation of the computer can sometimes cause this problem. A little later that I realized that even when the computer had not been put into hibernation for weeks sometimes started upward with the same problem. He said networks is not available and there is a red cross on a box where my wifi bars should be. I had to reboot my computer up to 5 times to get the bars will appear. When he did not connect to all pilots and equipment I need to connect does not even appear in the control panel. The other times where it worked the drivers were all there. I don't know yet how this can happen. The other computers in my home connect very well and are able to interact with each other at high speed and get internet just fine.

  Recently, I lost any connection even when I rebooted my computer 10 times it doesn't.

  I came across a thread that told me to access prompt as administrator and type in this

  netish int ip reset

  I was able to connect to my network now, but he says no access to the network or Internet. I also tried typing in this...

  ipconfig/flushdns

  now I can access the internet and communicate with other computers. I tried to play Minecraft while my friend was the host through the router, but the connection was so slow that it was as if I was looking at the past in slow motion. I crossed several times and abandoned. The internet is too slow. It's like I'm on dial upward, but it should be high speed, I don't know what the problem is. What else I can watch on my computer to help me solve this problem? Should I restore it to factory settings? Or is something broken?

  Hi Veronica,.

  Thanks for the reply.

  Sorry to hear about the inconvenience caused.

  According to my understanding, you are having trouble with internet connectivity.

  You upgrade windows or what was the first operating system installed on the computer?

  This problem is mainly due to drivers get damaged.

  To rectify the problem, you will need to uninstall the current network using Device Manager drivers and install the latest drivers from the computer manufacturer site.

  Please refer to this sub article, which will guide you to uninstall the drivers using the Device Manager:

  https://msdn.Microsoft.com/en-us/library/Windows/hardware/ff553572%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396

  To download the latest drivers from the computer manufacturer site, see the link below:

  http://www.ASUS.com/in/supportonly/U56E/HelpDesk_Download/

  Hope this information helps, for assistance please answer.