Footer div don't align in Dreamweaver when the swf file is added...

Similar Questions

• Problems with duplicate DATA when the data file was added after the backup completes

  Hello
  
  I am facing a problem when running of duplicate database with the command of database duplicate RMAN on a 10 g database. If I have the duplication from a full backup that is missing a data file that has been added to the database after the full backup of preforms, I get the following error message:
  

  Starting restore at 10-10-2009 18:00:38
  
  released channel: t1
  released channel: t2
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03002: failure of Duplicate Db command at 10/10/2009 18:00:39
  RMAN-03015: error occurred in stored script Memory Script
  RMAN-06026: some targets not found - aborting restore
  RMAN-06100: no channel to restore a backup or copy of datafile 43

  Redo log which was Pond at the time of the creation of 43 of the data file is also available in the backups. It seems that RMAN cannot use the log information archived redo to restore the content of the data file 43. I guess that because failure is already reported in the RESTORATION and not in the RECOVERY phase, so again the archived logs are not available yet. I get the same message even if I do another backup of the data file 43 (so a backup that is not in the same backupset as the backup to all the other data files).
  The script, the command duplicate product, I guess that RMAN reads the contents of the source database controlfile and trying to get a backup that contains all the data files to restore the database Assistant - if such a backup is not found, it fails.
  
  
  Of course, if I try to perform a restore/recovery of the source database, it works without problem:
  

  RMAN> restore database;
  
  Starting restore at 13.10.09
  using target database control file instead of recovery catalog
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: sid=156 devtype=DISK
  
  creating datafile fno=43 name=F:\ORA10\ORADATA\SOVDEV\SOMEDATAFILE01.DBF
  channel ORA_DISK_1: starting datafile backupset restore
  channel ORA_DISK_1: specifying datafile(s) to restore from backup set
  restoring datafile 00001 to F:\ORA10\ORADATA\SOVDEV\SYSTEM01.DBF
  .....

  The 43 data file is re-created and then redo is applied to the course.
  
  So, does anyone know if the duplicate database can use archived redo logs to recreate the contents of a data file, as does a normal restore/recovery? If this is the case, then it is necessary to perform a full backup before each duplicated if a data file has been added after such a backup database.
  
  Thanks in advance for any answers.
  
  Kind regards
  Swear

  Hi swear,.

  I got exactly the same problem during replication.
  Because we backup archive logs every 6 hours with rman, I added an additional block of running this script.
  run
  {
  backup incremental level 0
  format "% d_ % s_ %%t p_ bk_ '.
  filesperset 4
  database not saved;
  }

  (I also hit a bug in the catalogue which was resolved by patching up the dbs catalog 11.1.0.6, 11.1.0.7 for.)

  This will restrict the data not making file not part of any backup rman 6 hours while jumping for which there is already a backup of data files.

  Kind regards

  Tycho

• browser problem when the swf file is rebuilt

  Hello

  I'm having the following delicate problem.

  I use Chrome, Firefox and Internet Explorer to test my Flex applications.

  Today, I noticed that I built my application after a few changes in the code and Firefox and Chrome do not reflect the changes. Sound like they are stuck in the previous version.

  Internet Explorer runs the application very well.

  Any ideas on what could be the problem?

  CTRL + SHIFT + DELETE in Chrome to quickly clear cache. Furthermore if this problem annoys you, you can completely disable the caching of your browser.

• How to load images side when the swf file is hosted on a server without uplaoding it to the server?

  I am trying to build an online image resizing tool.
  problem I encounter are:
  
  1. create a button that allows the user to browse the file. Once the file is selected, it only shows the full path.
  2 lets say if she shows fullpath, but I try to load it into a movieclip, and this does not work because the swf file is located on the server and put the client.
  3. as far as I know, flash can only load the images located in the same server or internet.
  4. If I use php, asp, cgi... It can only make me 1 upload the image then resize later, but this is not wat I want.
  5. I need to 1 resize then download later, because if I have 100 and more photos taken of the digital camera, it's going to be very slow and cumbersome.
  
  What I tried:
  1. download 'image3.jpg' in the same directory as the "viewer.swf", and it works.
  2. not to upload the swf file to the server, but locally managed from the user's computer and open 'image3.jpg' and it works.
  3 upload the swf file to the server and open "image3.jpg" of the user's computer and the IT DOESN 'T WORK!
  
  Please help me.
  
  Thank you ~!
  
  
  

  Adobe air is in Beta 2 and is free:

  http://labs.Adobe.com/downloads/air.html

• If sendAndLoad() returns correctly in the swf file, but not when they are incorporated...

  If sendAndLoad() returns correctly in the swf file, but not when they are incorporated, does this mean that I am missing something in my html code?

  I use generic Flash embed code generated from Dreamweaver.  I can post more information if necessary.

  Thank you

  Peter

  peterbrinson wrote:

  Very useful.

  Is it because my swf/html and the database are in very different places?

  Yes, they are in different domains and adobe imposes restrictions on what a swf file can do with the data from one server to another (from the swf) area.
  

  Are you talking about a PHP or ASP file that integrates the swf?

  lol you create an executable file on the same server that hosts your swf.  This executable can query your database and not trigger cross-domain issues.

  your swf file can send and receive data from and to this executable without triggering cross-domain issues.
  

• Order full screen doesn't work when a swf file is read on another frame.

  I have a .exe file that has about 90 frames. All executives work very well with the command "full screen", BUT when I click on a button to access a framework which calls a swf file to a specific position on the stage and a specific size to full screen, the swf goes to the size of the regular phase. AND when I get out of this framework, it is not back to expand full screen Command.

  Flash CS AS3 WIN 7 64-bit 5.5.

  I have other frames that play a (movie) swf file to a certain size and position, and they work fine. But is not a swf file. I created all the files except the swf file. I received from someone about 7 years if there is what makes the difference.

  Any ideas?

  If you have configured your main as document:

  import flash.display.StageDisplayState;

  import flash.display.StageScaleMode;

  import flash.display.StageAlign;

  stage.scaleMode = StageScaleMode.NO_SCALE;

  internship. Align = StageAlign.TOP_LEFT;

  stage.displayState = StageDisplayState.FULL_SCREEN;

  My first assumption would be, because you said it's been 7 years, this person is using ActionScript 2.0. If you load an AS2.0 doc in a doc AS3.0 who will have limited functionality.

  Try to replace the 7 year old SWF you load quickly with a mannequin made AS3.0 placeholder and see if the problem goes away. Chances are it.

• htm or when deploying swf files

  For many years, I would download the htm and swf files in my FTP.  Then, I would like to make a link to the htm file and it opened the Flash file. I don't really know if this is the best method, but it has always worked.  At least with an earlier version of Captivate.

  I made a new animation Flash with Captivate CS4 and the htm file would not open the Flash file if I moved the files in the folder where the project has been published. What is really weird, is that while it would open the Flash file in the folder where I have published the project, as soon as I copied the files to another folder, or on the FTP, it wouldn't do anything.

  Here's the real question.  If I point my link directly to the .swf file, it opens the film.  What is the right way to open the Flash movie?  Should I make cela all along?  Also, do you think that this might create problems, movies opening with certain browsers or operating systems?

  Thank you

  Thor

  [email protected]

  No, open the SWF file directly is not the correct way to play a Captivate content.  A typical Captivate movie often requires other elements and programming code that is provided in the HTM file or in the JS file.  If you use a LMS system, API JavaScript SCORM code inside the HTM file is essential to communication between the film Captivate and the LMS.

  Your question to content do not play when the moved from a given file is probably due to the Flash security not implemented for the second record.

  Do some googling on the topic of Flash global security.  You will need to add any folder location where you copy content Captivate on your hard drive of the PC as a trusted location in your Flash Player Global Security settings.

  To test this, if you have access to a web server, download your content to a folder then navigate on this one as an address HTTP: / / and see if the same content once.  My guess is that it will be if your problem is related to the Flash security.

• The problem "your current security settings do not allow this action" when I want to open the swf file in Windows Media Player.

  How to solve the problem when I want to open the swf file in windows media player? There, half year, when I click on a swf file, it could automatically play in Windows Media Player.

  Now when I want to open a SWF with Windows Media Player, it pops up a window "your current security settings do not allow this action".

  How to use watch the video in Windows Media Player swf?

  Hello

  SWF is a file format for multimedia, vector graphics and Action Script in the Adobe Flash environment. Origin with future Wave Software, then transferred to Macromedia and then coming under the control of Adobe, SWF files can contain animations or applets of varying degrees of interactivity and function.

  SWF functions as the dominant vector "animation" on the Web for graphics display format. It can also be used for programs, games by browser commonly, using ActionScript.

  Method 1:

  I suggest open he file in Internet Explorer and check to see if you encounter the same problem.

  Method 2:

  Step 1:

  You can also try reinstalling Flash Player on the system to fix the problem.

  To uninstall a program in Windows 7 refer to the link below

  http://Windows.Microsoft.com/en-in/Windows7/uninstall-or-change-a-program

  Step 2:

  Once you uninstall Flash Player reinstall rear and check to see if you encounter the same issue.
  To download the latest version of Flash player refer to the link below

  http://get.Adobe.com/flashplayer/

  Once you download Flash Player see the link below to install a program downloaded in Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

• When I change the main mxml file in the project and then export the swf file does not change, why?

  I have an existing project, years ago that I need to change, I am using Flash Builder 4. When I export the project, it creates a SWF in bin-release, then when I change the code in the mxml project file or files of any format and export the swf file needs to change, but it's not. You have an idea why this might happen?

  Thank you

  I found the problem, there was a SWF into the html-template folder within the project. This has led to substitute the swf of the new generation.

• HELP DREAMWEAVER CS4 NOT SHOWING THE SWF FILES

  I have a presentation in two days in Tokyo. And I'm panicking.

  I'm on am Intel Mac OS X 10.4.11.

  I have the latest version of Flash Player 10 installed. (Not the new beta version).

  A few years ago, I created a great site in Dreamweaver MX.

  I never had PROBLEMS with the .swf files display until using Dreamweaver CS4.

  I updated my photography portfolios in Adobe Bridge and used Dreamweaver CS4 for link updates.

  IT'S NOTHING MORE THAN THAT!

  Then, show NONE of the .swf files which were still visible.

  There is absolutely NO of Flash content now showing on any page of the site.

  Not even in view in Safari or Firefox browser.

  I downloaded the files with the SCRIPTS folder newly created on my server, and still no .swf file is visible.

  These aren't the FLV files that they are .swf files which were anchored properly and were still visible. So far.

  I have to go to Tokyo in two days and give a presentation of this site.

  What is the problem?

  Attached files view in Dreamweaver CS4. The view in Safari and view in Firefox.

  I'm screwed for a job badly in Tokyo, if I can't get this fixed as soon as POSSIBLE.

  Help, please.

  You download the Scripts?

• list all population variables when a swf file is loaded from an embed tag?

  Hello
  
  Well, everything is in the title, I was wondering how I could possibly do this for some time.
  and everything I tried or thought went nowhere.
  
  I would like the list of all the html embed tag variables passes on the swf file called, what they are named, and how it is.
  
  "< EMBED src =" example.swf? = "varcontent" var, var2 = "var2content" >
  
  It is not deadly, but I hate to use things that work when I have an idea for things that would work better-x)

  Maybe this isn't what you're looking for, but... I would suggest you use a loop for IE;
  for (var i in _root) {}
  trace (i);
  trace (_root );
  }
  Then in weeding out the things that you already know.
  

• Divs don't align

  www.acemon.com

  The site is validated but does not display correctly.

  Under the heading are two divs, "introtext1" and "introtext2" and even if the code of each is identical (apart from the left margin), they align on top.

  There are four divs that are marked 'text', and when I start to add words to each, the adjoining div 'click here' falls down depending on the amount of words in the "text" div

  Maybe my problem is to get only two hours of sleep and I'm missing something obvious.

  Thank you.

  Add float: left; to your 'introtext2' css and change the left margin to 20px (as below)

  {#introtext2}

  do-family: Arial, Helvetica, without serif.

  background-color: #6F6;

  float: left;

  height: 300px;

  Width: 430px;

  top of the margin: 20px;

  left margin: 20px;

  padding-top: 5px;

  padding-left: 10px;

  padding-right: 10px;

  }

  Move your box 'click here' is because you have your html code in the wrong order. It should be as below (note the closing of 'text' comes before 'click here')

  Tag:

  By the way, you have your comments for closing

  Tags in the wrong place too. Below, they are in the right place.

  The Basic Plan - $75 complete

  You get three pages featuring your home. The first page shows the front of your House, and a description of the features. The second page have six windows pop up, each with different rooms of your House. When someone clicks on an image, they see a larger version of the photo, with a detailed description. The third page offers contact information, a link to MapQuest to allow potential buyers to find your House and space for visiting card of your REALTOR.

  

• Flash container... to big when viewing SWF files

  I used Flash Professional CS5.5, to do a SWF.file, when I save like all, it also includes a FLA file. I use this SWF file in Dreamweaver CS5.5, Insert media, for this I put the settings name .swf, discovers. When I select Live View, all ok series, but how you do the smallest box grey Flash that keep the images the same swf size... When I change all the widths and heights banner plant with very small images.

  <! - end .sidebar1 - > < / div >
  < div class = "content" > < h1 >

  < object classid = "clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width = "572" height = "400" hspace = "1" hspace = "1" id = 'FlashID' title = "banner2" > "
  < param name = "movie" value = "" banner2.swf? banner2.swf = "/ >"
  < param name = "quality" value = "high" / >
  < param name = "wmode" value = "opaque" / >
  < param name = "swfversion' value ="6.0.65.0"/ >
  <!-this param tag prompts users with Flash Player 6.0 r65 or later to download the latest version of Flash Player. Delete it if you do not want users to display the prompt. ->

  < param name = "expressinstall" value = "Scripts/expressInstall.swf" / > "
  <!-next object tag is for non - IE browsers. Then he hide from IE using IECC. ->
  <!-[if! IE] >->
  < object data = "" banner2.swf? banner2.swf = ' type = "application/x-shockwave-flash" width = "572" height = "400" hspace = "1" hspace = "1" > "
  <!-<! [endif]-->
  < param name = "quality" value = "high" / >
  < param name = "wmode" value = "opaque" / >
  < param name = "swfversion' value ="6.0.65.0"/ >
  < param name = "expressinstall" value = "Scripts/expressInstall.swf" / > "
  <!-the browser displays the following message

  Thanks I await a response...

  E-mail [email protected]

  I was not able to view the text in this area of flash diolog, always a big gap...

  Hello Glen,

  question is answered in the way of this - John?

  Hans-Günter

• AnyConnect Cert warning error when the xml file is changed.

  Hello world

  We have valid CA cert and it is installed successfully on the ASA ASA associate outside the interface.

  When you use ipsec IKeV2 with any connection pre deployment anyconnect when I change the anyconnect on ASA and user profile

  connects the first time, he gets the warning below

  Untrusted security VPN server certificate warning

  The options are

  Connect anyway cancel connection

  I click on connect anyway and anyconnect is connected.

  Checked that CN has the FQDN value.

  We do not use SSL certificate.

  When I connect the second time above cert error warning do not come.

  This warning cert error only comes when the changes are made to the anyconnect profile and the user connects again to the AAS.

  We do not use cert based authentic.

  Any ideas how I can fix this problem?

  Concerning

  MAhesh

  You can remove and reinstall the certificate authority. It will require that first delete you the configured services dependent thereon, binding to the interface etc..

  I am not convinced that would fix what you see, and it would not be my first choice.

  First, I would check things like why don't not the client approves the certificate (audit for example simply by accessing the interface of the ASA and see what your browser indicates that the question (both Firefox and Chrome are very useful in telling you of any problem with the certificate if you expand the details), what is the content of the profile and changes) the etc.

  You can open a TAC case?

• How to close a jmf rtp session when the entire file is sent.

  I use jmf to stream a video file from one client to another, everything seems to work fine except for the fact that I don't know how to close the prosessor and the session/datasink on the transmission side when customers the clientis done streaming, I can close lets say after 60 seconds of starting, but I am not able to understand how to stop when the entire record is streaming. I tried to use the datasinklistner when sending the video and the following code

  public void dataSinkUpdate(DataSinkEvent event) {
  
           if (event instanceof javax.media.datasink.EndOfStreamEvent) {
               endOfStream = true;
  
           }
       }

  but the endofstream event is never received from the data source.
  
  the problem is that it works very well if I using 20 second video and I close the datasink and the processor in 60 seconds, the entire file get listened to but if I have a file for more than 60 seconds, then just file is reduced to 60 seconds.
  
  I also tried to use a sessionmanager a sessionlistener and a sendStreamListener with the following code

  /**
       * SessionListener.
       */
      public synchronized void update(SessionEvent evt) {
  
  
      }
  
  
      /**
       * SendStreamListener
       */
      public synchronized void update( SendStreamEvent evt) {
          System.out.println(evt);
  
       if (evt instanceof InactiveSendStreamEvent) {
            flag=true;
            System.out.println("done");
  
  
       }
       if (evt instanceof ActiveSendStreamEvent) {
  
           System.out.println("start");
  
  
      }
      }

  I ran the code and send files and everything, but neither an activestreamevent nor an inactivestreamevent happens but the file is currently distributed correctly

  user13490676 wrote:
  could this be a problem with jmf itself that the endofstream don't get generated for the playing of a file data source

  In this case, that would be the problem... more that likely there is something odd about the file, maybe it doesn't have a duration set in the header and JMF treats it as a live stream.

  You can always write a custom data source that passes right through the entrance of a normal data source and then generate the EndOfStream event yourself... maybe based on a timeout counter or failure? I have not received all the data in x seconds or after x attempts, so I guess that the file is... Or when you have read enough data that the file cannot have more (read > = file header / data file)...