For Dimension 2400 RAM upgrade

Similar Questions

• Dell Dimension 2400 RAM upgrade

  I've recently updated my memory on my Dell Dimension 2400 512 MB to 2 GB (entirely new memory sticks) and when I try to start my computer I get a series of loud beeps and no video input. I tried the stick at a time and I re installed to ensure that them have been installed correctly. Any advice would be greatly appreciated.

  System specs

  processor Pentium 4 2.5 ghz

  512 MB nVidia gt610 graphic

  512 MB of RAM

  Hi orcacros,

  Welcome to the community.

  Please let me know the specification of the new memory sticks. If you bought this online store, please give the link.

  It's starting with the old memory stick?

  If it is booting with the old memory stick, please update the BIOS by clicking on the link below:

  http://Dell.to/XBFOGw

  Dell Dimension 2400 will take care of the modules of memory 266 MHz or 333 MHz. Modules of DDR 200 MHz speed are not supported.

  Thank you & best regards
  Mustapha S
  #iworkfordell

• Pls help me to upgrade memory of 512 MB for Dimension 2400

  I used the Dell Profiler information and bought a memory card of 1 GB of Dell Online for my Dimension 2400.  Now, I'm ready to install, but the technical specifications. information on the Dimension 2400 implies it will be inconsistent.  Now, I think I should have bought a 512 MB card and installed instead for a total of two cards of RAM 512 each.  Now that I have the 1 GB, could I install and remove the 512 standard which came installed?  Install the 1 GB in addition to the stock 512 MB card?  TY in advance.

  
  

• Dimension 2400 memory upgrade now, I have no monitor?

  Hello everyone and thank you for being here to help. My son has a Dimension 2400 w / 34GB of hard disk, which is currently at the maximum. It has 384 MB of RAM. 128 in DIMM1 and DIMM2 in 256. I went to BB today and bought a new stick of 512 MB PNY that I swapped the 128 for. Everything seemed to go well. A few hours later when my son went to use the PC the monitors stand by orange light was on and no picture. The first press there is no answer. A second try the monitor off, when I turned it back on it went green for a moment and then clicked on return to orange, still no picture.

  I double checked all the connections and everything seems to be okay. When I removed the cable from the monitor, I heard some no clicks from the monitor, always good, no picture. I turned off the pc and reboot, still nothing. However the pc would not then shut down. I then turned off through the throttle, but when I repowered it, the pc came back. Still could not turn off so I unplugged it for now. Any thoughts would be GREATLY appreciated!

  Thank you!

  
  

• Options for Satellite U200 RAM upgrade

  Hello

  I read a few posts here, but I'm a noob of material and you want to be absolutely sure I chose the right RAM module.

  I want to be exactly if the module I buy will work with my computer laptop u200 (especially not the damage, if that's even possible).

  I'm looking at _Kingston 2 GB 200 pin PC2-5300 DDR2 SODIMM_

  Found here:
  101436 http://www.FutureShop.ca/catalog/prodDetail.ASP?logon=&langid=en&sku_id=0665000FS10 & catid =

  Please let me know if you need more details.

  Thank you!

  Hello

  According to specification for laptop, your laptop uses the module DDR2 - 533 MHz RAM. There's Kingston 667 MHz, but it will work on your laptop without problem.

  So, but there is something else: I don't know which U200 you but it seems to be that your laptop can be upgraded up to 2 GB max. So, in my opinion, you should buy two 1 GB Rams. If you want to buy tested one, to check for the DDR2-533 1 GB with PA3411U-2M1G part number.

• Dimension 5150 Ram upgrade

  I have a Dimension 5150 with 1 GB of ram to 2 512 mb DDR2 sticks.

  I want to go 2 RAM sticks of 2 GB to 4 GB of Ram this computer manages it?

  I ask because I bought 2 PNY 2 GB P6400 tech when I intalled them my pc beaped just to me and would not boot.

  Is it cus I don't use ram dell or will my comp just not manipulate.

  
  

• Dimension 2400 - two upgrades and two questions/problems

  So finally had time to update this old thing.  Did some research and found what was compatible. Bought a ram and a video card. Now since their installation for the most part unsuccessful I have questions:

  RAM

  I bought a 2x1GB corsair because I read that 2 GB is the maximum computers. When I install both the computer refuses to start, but with one of the privateers and the original dell computer piece works very well (and much improved, I might add). Every they say 1024Mo, if that helps. also do I need to update the BIOS? After the installation, read this should perhaps have been made beforehand.

  VIDEO CARD

  I also bought the nvidea gforce 5500. I followed the instructions to a T with respect to disabling the dell one printer and changed the setting to the start screen.  Then after installing the card and rebooting the machine, I get nothing on the screen.  I read somewhere that this could be a prob of resources? not sure why tho since this thing is also supposed to be compatible.

  OK thnx in advance everyone, sry if they were invited to a million times, but I don't see all the answers that helped me understand how to go about fixing these issues.

  
  

• HP - Pavilion x 360-13 2-in-1: Ram upgrade

  I want to upgrade RAM 4 GB to 8 GB - I got the RAM, but there is no easy access to change RAM-are there info /accesibility instructions for this computer RAM upgrade

  Here is the Manual:

  Manual

  Memory access is a complete teardown. You must remove the motherboard. See page 53.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• New HP 2011 x 20 '' LED monitor for old Dell Dimension 2400. necessary graphics card?

  My in-laws have an old Dell Dimension 2400 and the monitor exploded. I bought a new HP 2011 x 20 '' LED monitor. My WIRE went to set up, and he tells her that a HMDI graphics card is required.

  This is a pretty old computer. I think he might have as... 512 MB of RAM. Is there an inexpensive graphics card that will meet their needs?

  And besides, when they buy the graphics card, are there all the cables that they must reach a new monitor to an old computer?

  Thank you very much!

  Nice description of Dell:
  Video connector to 15 holes :-)
  
  Seems to be a VGA connector.
  
  From the description of the monitor:
  http://support.HP.com/us-en/document/c02643130
  There is an also vga connector, so you will have no problem to connect the two.
  
  No additional card is necessary, no other cable - just use the old vga cable.
  
  Your only problem might be the resolution:
  resolution 1600 x 900 set at the factory for the monitor.
  
  I don't know if you can set the resolution to Dell, you should test.
  
  Otherwise a 4:3 normal/old monitor would be better than this 'big screen' new.
  
  HTH
  C.
  
  P.S. the Dell printer documentation:
  http://support.Dell.com/support/eDOCS/systems/dim2400/

• The upgrade of old Dell Dimension 2400 CPU, GPU, memory, etc...

  Mainly interested in CPU upgrade at this time. I have download CPU - Z to determine my profile and I provide this stitched-together set screenshots of this program:

  

  I just put the CPU of my Dimension 5150 friend successfully. I would only reproduce on my 2400 - a much smaller machine. This computer is mainly used for the casual internet browsing, and sometimes I watch a Youtube video. The only programs that really tax the CPU are my disk defragmentation and the program CCleaner. When I have a great session of internet browsing of 100 + tabs, the CPU also emerged at this time here.

  I want to the maximum this computer using cheap parts upgrades, that I can buy it on eBay. On my 5150 friend, I bought a processor upgrade for $5 delivered and a thermal paste to ebay for 80 cents. I wouldn't mind buying a cheap video card and processor to upgrade this old workhorse

  sva50233

  The Dimension 2400 can use 400 MHz or 533 MHz, Socket 478, P - 4 Northwood or Celeron processor with a 512 k or more small cache.

  You cannot use all processors Prescott [1 MB cache].

  The maximum support of the processor is P - 4 Northwood, 533 MHz, Socket 478, 3.06 GHz.

  Before upgrading the processor, make sure you have the latest version of the BIOS installed.

  With regard to the video card, only the PCI cards are supported, no PCI Express card is supported.

  The Dimension 2400 supports a maximum of 2 GB (2 x 1 GB Modules) memory DDR.

  Bev.

• 23 - R115a HP all-in-one: looking for RAM upgrade HP 23-r115a video

  Hello

  I'm trying to find a video guide for disassembly of the HP 23-R115a, for the purpose of upgrading RAM.

  I tried HERE, but does not have the info I'm looking for.

  I couldn't have managed to find what whether on YouTube or the other. Your help would be appreciated.

  TIA.

  Hello @AeroGEL,

  Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

  I understand that you have a problem, find a guide to upgrading the memory Modules and tried to help you!

  You can try to see the following guide: maintenance and Upgrade Guide (Page 15).

  In addition, the video here can help: OPEN ME UP! HP Pavilion 23 disassembly

  (Not a HP website supported).

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Correct procedure for the Ram upgrade.

  Dear Sir, I recently bought a laptop from HP 15-r074tu,

  It comes preinstalled with a 4 GB of Ram. I want to upgrade to 8 GB.

  I don't know where I should achieve this. I should get this done @ the store where I bought it?

  Or do I have to reach out to a HP's Service Center. Just so it is not void the warranty.

  Can someone kindly shed some light and enlighten me.

  Thanks in advance.

  Hello

  Here are the details given below for the upgrade of memory also attach the manual link given below for your reference. Check replacement for the component numbers 73 procedures page & 1 Page for more information on memory.

  Memory
  housing for module customer accessible/upgradable memory 1 or 2 (depending on model)
  2 slots: DDR3L - 1600 MHz Dual Channel Support (Core processors)
  1 location: DDR3 1333 MHz Dual Channel Support (DDR3L-1600 demoted to the)(Bay Trail) DDR3-1333
  processors)
  1 location: DDR3 1333 MHz Dual Channel Support (DDR3L-1600 demoted to the DDR3-1066)(Bay Trail)
  processors)
  Supports dual-channel memory
  Supports up to 8 GB of RAM in the following configurations:
  8192 MB total system memory (8192 × 1.) or (4096 x 2)
  System memory total 6144 MB (4096 × 1 + 2 048 × 1)
  Total system memory of 4096 MB (4096 × 1.) or (2048 x 2)
  Total system memory of 2048 MB (2 048 × 1).

  Spare part number : 8 GB (PC3L, 12800, 1600 MHz) 693374-005

  Manual link

• Laptop HP Pavilion 14 n201-tx: RAM upgrade for laptop HP Pavilion 14 n201-tx

  I have a laptop HP Pavilion 14 n201-TX with 4 GB 1Rx8 RAM of PC3L - 12800S. The other location is empty. I want to upgrade the RAM to 8 GB or more.  I have 2 questions:

  1. Can I buy a 8 GB of RAM and pair it with the existing 4 GB RAM?

  2 should. what RAM I buy? How to choose the RAM compatible, right?

  Help, please. Ty.

  Hello

  Download the manual from the link below and check page # 3 of Chapter 1 for RAM upgrade

  http://h10032.www1.HP.com/CTG/manual/c04439608

• Dell Support download has some drivers for old Dimension 2400, responsible of what was there, but still have an unknown device

  Hi, hard drive is dead on Dell dimension 2400, re-installed with existing win XP (SP3).  Another computer used to go to Dell support and download line that few drivers I could find for the serial number.  (Broadcom Integrated NIC, graphics controller, Modem) Drivers installed and I still have an unknown device (point yellow question mark for unknown sandwiched between the network adapters and Ports).  Wired Ethernet worked before hard drive failure - properties for Broadcom 440 x say ' device working properly ", but it will not pick up a DHCP IP.  Set the IP to the network router and can now same URL and local peripheral ping like www.google.com , but cannot get to internet with IE explore manually.

  Is there any other software drivers that are found in Dell archive somewhere I need to load to remove the unknown device?

  Any idea this device might be hiding between the "network adapters" and "Ports (Com and LPT)?  Appreciate any help.  Thanks, Dave

  Please provide the hardware ID:

  http://dellwindowsreinstallationguide.com/downloading-drivers-checking-hardware-ids-and-downloading-and-installing-dell-system-drivers-in-the-correct-order/checking-hardware-ids-in-the-device-manager/

• upgrade of dimension 2400 heatsink

  No one knows what other heat sink or cooler I use in my dell dimension 2400 I can't seem to find another at all my old work well and help my computer on sleeves

  I have installed a standard spare heater Socket 478 in my 2350, similar to the 2400, but lost BIOS fan control and had to install a fan controller. I have tried both a Rosewill and a Zalman 7000 ALCU.

  If you're wondering, the 2400 is standard mATX case, apart from the audio before, wiring is compatible with the standard headers. Regarding the audio before, he has the standard wires and can be rewired for an ordinary 2 x 5 socket Molex, which I did with a Dimension 3000 (same chassis).

  Meanwhile, the 2400 has been designed to work with the heatsink you have, then why is it overheating? Perhaps the bracket is broken and the radiator is not firmly attached to the CPU? If you need a new slice, standard Socket 478 units could operate; I replaced the broken leg in my 2350 with a new generic one from eBay.