For ESX 3.5 USB connection experiment - identify device I.D.

Similar Questions

• Tab 2 A10 - 70F: Internet access via USB connected 3G / 4G device?

  Hello

  The A10 - 70F Tab2 has WiFi only. Is it possible to connect to the internet with a connected USB 3G / 4G? With other words: the tab can handle? Anyone with experience?

  Thank you in advance,

  Michael

  Yes is the short answer. And a few ways to do this:

  1 micro USB Dongle of 3 / 4 g

  2. micro USB to USB 'female' - then plug a 3 / 4 g USB Dongle

  And a couple of less obvious ways:

  1 WiFi connection to another mobile and use of mobile data of quotas (although plans only works on some data)

  2 micro USB to Micro USB and connect a mobile as shown above (does not work on all devices, although I look at the phone and tablet to fight for the battery juice is hilarious)

  3. connected to a PC via the cable USB/WiFi connection internet PC use.

  But yes, 3 / 4g Dongles work indeed & the Tablet seems to walk along very well with a micro USB version or a USB version with an adapter cable.

• USB connection does not work on my computer for hdr-cx260v

  It is a question (especially) on and off (sometimes). I have worked with Sony and have sometimes succeeded. With the help of the 'extra' 16 GB card works to connect and load. My problem is when I use the video stored in the internal memory and using the usb connection. If/when I ever actually loading the data from the internal memory (I have actually already loaded most, but not the most recent), I intend in the future to use only the memory card "exernal. My most recent appeal of Sony said I have no help since the camery is 2 years and more - they send me an e-mail to a site that gives instructions, but the instructions don't seem to solve my problem. I don't seem to have any connection problem "devices" of my USB ports.

  When I connect the camcorder usb to my desktop (using different connections of USB drive) pc, my computer does not recognize the fittings of the. When I use another card memory USB for same usb connections, the computer recognizes the drive. There have been a few times when the camcorder has acknowledged the connection of the camcorder (most recently on June 12) - but this does not occur at thie time. If I take the memory card 16 GB additional of the camcorder and connect it to the connection of memory card, the computer has always recognized it.

  My problem is trying to get the video from the cameras internal memory via the USB connection.

  I think if/when can I get these loaded files, I have the intention of is no longer using the internal memory of the camera and always use the extra memory card.

  Stone

  I realize that if I could have the laptop recognizes the usb connection, I could manually copy video files myself, even if I think THAT TDC would have also worked in this case.

• Is there a file management utility availabe for transfer files from Iphone to PC using the USB connection or wifi? Thank you

  Is there a file management utility availabe for transfer (image) files from Iphone to PC using the USB connection or wifi? Thank you

  You should be able to synchronize with a compatible Picture Manager, but you can also see the TouchCopy application.

• HP psc 750xi - USB connection. for windows7 professional 32-bit. driver does not work.

  HP psc 750xi - USB connection.  New windows7 professional 32-bit.  I downloaded the proposed driver from hp.com but ' the selected printer is not currently supported by this wizard ".  Help

  Hi flojo9,

  Follow the steps below to load the driver for Win 7.

  1. open devices and printer

  2. click on add a printer

  3. replace the USB port and then click Next

  4. click on Windows Update (step 1)

  5. once the update is complete, you will need to select the PSC 750xi driver in the list on the right (step 2)

  

• USB connection not detected for Samsung Fascinate

  I have a smart phone Samsung Fascinate 1500.  When I connect it by USB to my computer, the computer no longer detects it as a media device or mass storage mode (although it worked fine the first few times).  The phone also does not detect the connection and simply seeks to charge the battery.  I downloaded the latest drivers and tried allowing pop ups without success.  Any ideas?  I cannot download my music, and it's a lot of time to transfer photos by other means..., including that I had to buy a SD card adapter.

  The USB port works with other devices.  I don't think that the USB cord to my phone is the problem, as others have shared this problem in other forums.  Does anyone have a solution?

  Hi Lin,

  1. have you tried to connect the phone to another computer?

  2. have you made any recent changes of hardware software on the computer?

  Test the device on another computer. Additionally, make sure that the software provided with the Samsung phone is updated.

  Please visit these links for more information:

  Install a USB device:

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-USB-device

  Problems with USB devices:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  I hope this information helps!

• drivers installation for OfficeJet J6450 on Windows 7 (64) and the software doesn't detect USB connection

  I install the drivers for OfficeJet J6450 on Windows 7 (64) and installation software doesn't detect USB connection.  I recently had to upgrade Windows 7 in Place.  The printer was working fine before the upgrade.

  Hi shconner,

  Looks like you need to uninstall what is already installed. Restart the computer and use the software features on the Web site to reinstall the printer.

• My Dell V313w stopped printing/scanning mode wireless or with a direct USB connection after working flawlessly for 2 years

  My Dell V313w stopped printing/scanning mode wireless or with a direct USB connection after working flawlessly for 2 years - any changes made on the network wireless to our knowledge.  Printer works fine in USB mode on old Windows 2000 office.  Network sees the devive asked to detect devices.  Wireless to the printer hardware is perhaps not handshaking...?  Please let know us that he is a very curious pnnc.

  Windows 7 is updated as well as the print driver.  Thank you.

  Hello abir.

  Thank you for giving us the opportunity to help you with your concern for Windows.

  From your post, it seems that you cannot print from Windows 7-based computer.

  When you say "no changes made on the network wireless to our knowledge", which is the type of network you're talking about? (Workgroup, domain)

  It is a difficult problem to diagnose because there are many printers on the market and many reasons why it could not work.

  We will try the steps from the following link and check if this solves the problem.

  Why can I not print?

  http://Windows.Microsoft.com/en-in/Windows7/why-cant-i-print

  You can also check this link:

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Response with the State of the question, too, let us know if you need help with Windows problems and we will be happy to help you.

• How can I disable a VM pref retroactively or by substitution of policy? (for example on stop USB auto connect)

  I'm using VMWare Workstation 7. We have a problem that I met in a large number of virtual machines is that they didn't 'Automatically connect new USB devices' disabled when their snapshots have been created. Although I can disable this preference in future from the virtual computer, disabling the preference power and take another cliché, it's a great nuisance. Is it possible that I can replace all the VMS I load and resume on my system basically by default that the preference off, regardless of the way in which an individual VM may be set, essentially the substitution of the individual preference?

  It has become very annoying. I had all these clichés with auto USB active connect. I could disable the vmware USB cross on the host completely, but I still need USB. I just don't want to connect devices automatically.

  If there is a way to replace the policy, I would also like to add something like bios.bootDelay = "5000" as a preference of substitution so that all virtual machines running snapshot would use this preference.

  Thanks for any help or idea that you can offer

  WoodyZ thanks for your help. I was able to stop the new devices to be autoconnectée. I looked in the vmware.log for some of my virtual machines. Workstation search three configuration files:

  DICT - USER default C:\Users\\AppData\Roaming\VMware\config.ini

  DICT - C:\ProgramData\VMware\VMware Workstation\config.ini default HOST

  DICT - GLOBAL SETTINGS C:\ProgramData\VMware\VMware Workstation\settings.ini

  First, I tried the HOST file. I've added:

  USB. Generic.AutoConnect = "FALSE".

  It worked, but only if the vmx file does not explicitly mention the opposite (in other words, there is no substitution). AutoConnect is by default TRUE, many vmx files won't that explicitly in the file vmx is always a good solution to stop the automatic connection of new devices. But for example I put in a file vmx usb.generic.autoconnect = "TRUE" , and even with autoconnect defined in the file HOST " false", autoconnect is always enabled when I came to the virtual machine.

  Then, I moved this line between the HOST and the GLOBAL configuration file:

  USB. Generic.AutoConnect = "FALSE".

  That seems to work as a substitution. I tried several times to confirm, the VMWare Workstation 9 closing and reopening. Whenever I took a virtual machine, although it was usb.generic.autoconnect = "TRUE" in the vmx file, the automatic connection of new devices has been disabled. Is why it seems the correct way to override and disable usb.generic.autoconnect no matter how it is defined in a vmx file is to place the preference in the GLOBAL file. Note that changing that option prevents only against the new devices being autoconnectée; in other words, it prevents the devices that do not already have a login entry automatic explicit device in the file like usb.autoConnect.device0 vmx, usb.autoConnect.device1, etc.. Also note that when a virtual machine is interrupted the USB controller "connects automatically new USB devices" in the GUI can still see the verified, but when the virtual machine is resumed, it will be disabled.

  Stop autoconnect entirely: I have experience implementing usb.autoConnect.device0 = "" global config and who can stop a device with a usb.autoConnect.device0 entry in the vmx file to be autoconnectée on the resume. " And once the virtual machine is resumed the device can still be connected manually. (Although there will be a warning on connect "the value of usb.autoConnect.device0 cannot be redefined" so maybe it's not ideal). If someone wanted to expand this idea they could add a line for each up to usb.autoConnect.deviceN with N being all that is the max. Anyone know what it is?

  If someone who reads it isn't aware of any piece of data that really makes a recommended to contain malicious software on a virtual computer then this information must be added. I don't know that if many people is aware that if your virtual machine is the active window and you plugin a key USB and VMWare tools is installed on the client, then the default player is autoconnectée at the prompt.

  I am also playing with adding other prefs from different files; like right now I've got bios.bootDelay = "5000" in my HOST file and that works for delaying my VMs to start in 5 seconds to make it a little easier access the BIOS.

• Unable to connect to target iSCSI for ESX 3.5

  Hi all

  I have an esx 3.5 build 82663 (update 1). We took over this company, so we are migrating this data center. I understand tha patch isn't 5 update but it wasn't our environment and we try to turn it on.

  We have three esx servers

  (1) console production svc - 192.168.7.x

  (2) storage network - 192.168.9.x

  EqualLogic 3)-192.168.9.x

  (4) storage Switch - CISCO 3750 Switch

  (5) frames enabled on vswitch, vmknic, physical, switch, network interface cards, table vlan and storage.

  (6) software iscsi client allowed an outgoing connection through 3260 (tcp)

  Performed troubleshooting

  esxcfg-vmknic - l - seems ok and with activated jumbo frames

  esxcfg-NICS - l - looks ok with activated jumbo frames

  esxcfg-vswitch - l - looks ok with activated jumbo frames

  esxcfg-road - l - (looks good)

  192.168.7.0 255.255.255.0 local subnet

  192.168.9.0 255.255.255.0 local subnet

  by default 0.0.0.0 192.168.7.1

  Works of vmkping between the storage network interfaces (192.168.7.x) i.e. physical switch, equallogic, and other interfaces for esx storage network.

  vmkping s 9000 192.168.9.11 (equallogic san) works without packet loss.

  Ping does not work between interfaces.

  Ping of physical switch to the san and esx equallogic storage network interfaces work

  Access to LUNS equallogic shared among interfaces are restrticted by the ip address of storage network (192.168.9.x). The LUNS they check marks against them to have several initiators communicate with them.

  No enabled chap authentication anywhere.

  I had another server with the same configuration connection to it without problems to the only difference is esxi can be accessed and the esx servers cannot access.

  Our environment has been only esxi. This is the first time I use esx and a system of update 1 for iSCSI.

  I'm on the critical path to complete the project.

  It would be useful that I can get all the help you can.

  See you soon,.

  Knockaert

  If I'm not mistaken in your service console needed to have access to the storage network 3.5 too.  Try to configure a second service on the storage network console and see if you can view the LUNS.   Can also be useful to filter through the vmkernel logs and see if you notice any errors.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• Copy the VM from USB for ESX 4.0?

  I have all the files that make up a virtual computer on an external drive (40 GB of data).  I need to get them on a new server ESX 4.0.  What is the fastest way to similest to do this?  Can I mount the service console USB drive and just copy the files?  Is there a conversion process that must work because they are 3.5 and I put them on a 4.0 Server?  Thank you.

  Means the faster is to log on to your workstation and use VMware Converter or Veeam FastSCP for ESX move data.

  ---

  VMware vExpert 2009

  http://blog.vadmin.ru

• HP M426fdn MFP - scanning with a USB connection for laptop possible?

  Can anyone confirm that scanning HP M426fdn will work if your computer is connected by USB instead of network?

  Trying to confirm this before buying.

  Thanks in advance,

  Brian

  Hi Brian,.

  Yes, you can use any of the printer by using a network connection or a direct USB connection to your computer.

  Be aware that this connection allow using one computer, not several.

  Shlomi

• USB connection for speakers/conrtols do not work?

  Hello.

  My daughter has a bed that connects to an MP3 player via a USB connection and speakers and play controls on it. SanDisk Sansa clip plus is not working, looks like he's trying to connect to a computer to receive information. Is there something I should do differrently or if this feature is not supported with this MP3 player?

  A bed that connects to an Mp3 player? Cool!.  The Clip + has two modes, the MTP and MSC mode (settings > system settings > USB). If you transfer files under the PSG, the songs will not appear on the computer when you connect in MSC mode and vice versa. Most likely your bed does not recognize MTP peripheral devices. That being said, try transferring music on both msc and mtp and do a test. Try to connect the Sansa to your bed under MSC and MTP.

• Gigashot K40 - USB connection mode lights up when

  Hello.
  I have a camcoder Gigashot K40. When I copied the files on my PC, camcorder battery sat. I connected AC voltage, camcoder and continuous copy operation. After that I disconnected PC camera as usual.
  The problem started when I turned my camera next time. When I turn on camcoder, after 2-3 seconds, it entered in USB connection mode (but without text "Mode high speed USB" on the screen).
  http://img9.imageshack.us/my.php?image=k40m.jpg
  Only way to enter normal mode for recording videos is pushing after lighting camcoder menu.
  I tried to do the soft reset, I pushed the RESET button, I tried to reload the firmware - but it does not help.
  Any ideas? I can solve the problem by myself or must I go to service?

  So soft reset didn't help I really don't know what you can try now.
  Call and ask what the problem is here.

  I thought that the rebate to zero must be the solution when the cam is source of confused.
  Please let us know what they tell you.

• USB connection problem

  Whenever I connect my tab to any PC or laptop using the USB cable, it is not connect. It is not pop window on the USB connection. USB port works fine. Tab gets charged through this property. Functional disorder it is. Everyone will solve it?

  Hello and welcome to the HP support community!

  Need a few details.

  What tablet you are asking about?

  What OS is on your PC?

  Tried another cable?

  Usual suggestion is to unplug the devices and reboot the computer and tablet.  Check the settings of the tablet in storage/settings / < icon options, top right - looks like 3 blocks stacked vertically > / USB connection to the computer.

  See if the PSG is checked.  It is suitable for the transfer of all types of files.  Connect the devices.  If still no joy, try to uncheck MTP and PTP.  This should make the Tablet appear as a camera.

  I had to do with an old Win XP computer so that he can "wake up" and make the connection.  I then switched to the PSG and all was good!

  WyreNut