Impossible to establish a TLS connection to the POP3 server

Similar Questions

• Impossible to establish a wireless connection on the Satellite

  Hi all

  I am desperate because I implemented an env wireless in my house, and all my machines work fine except the toshiba one.

  In fact I see the network wireless only in Intel tools, then I click the button connect and get connected a second and the GET disconnected (but wireless is always visible from the laptop.

  Where do you think the problem?
  Router wireless card or the problem is in the toshiba.

  Note that I'm able to make the system operational wireless on another without any problem.

  Thank you for your quick feedback on this issue.
  Best regards.

  Hello

  Not easy to say what could be wrong or what might help.
  You must see this:

  -> try to update the WLan card driver
  -> check the WLan card driver and advanced properties tab more you could disable option economic power.
  -> try to use own windows Wlan connectivity
  -> disable the encryption on the router and try to connect without any security option.

• When you try to activate Windows I get an error: Code 45123 could not establish a connection with the activation server.

  the error number is 45123 and said "we could not establish a connection with the activation server." Please give me an answer to this error and try to solve it! If you want I can send you my product key to activate it, but I think it's better on email not here because there are a lot of... the pirates who have access to this site! provide me with an email address and I'll send you my product key and try to activate it and then give me the id I need to enter the activation window! Thank you!

  I solved this problem! Thanks for the help!

• System will not be activated. Receive the error message "system could not establish a connection with the activation server.

  Activation.

  My OS system has been altered, so I formatted and installed new, but can not activate. I have this installation id 348020-631951-163976-154093-556113-629786-940105-229483-661432, I need confirmation id because my system could not establish a connection with the activation server

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the product key numbers and letters
  (number 8 for the letter B, etc.)

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: Http://www.pagestart.com

• 'Impossible to connect with the activation server' while trying to activate Windows 7

  Stater of the i run windows 7 on a laptop dell inspiron N5050 32-bit, windows asks me to re-enter my product key each tome I get it it displays after loading: impossible to connect with the activation server, see other ways to activate windows, pls make serious saying my trial period has expired why it cannot connect to the server to check the product key? Help, please

  Original title: activate windows

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• HP Envy Notebook dv6: unable to connect to the proxy server

  I saw an error message "Unable to connect to the proxy server" when I try to connect to the internet via WIFI, even if the label shows who is connected to my home router.

  HR63 wrote:
  

  Thanks for the tip, there is so much information, the laptop with this problem belongs to my daughter and because she doesn't have an internet connection (can not download anything), there is another way to fix it?

  I don't know because the online is where most of the instructions are locate in. I copy and paste the links here, but unless you can print them out or print the online pages it becomes hard, but here are the parts of the txt of it. +

  http://malwaretips.com/blogs/unable-to-connect-to-the-proxy-server-removal/

  How to remove "Unable to connect to the proxy server" (Virus Removal Guide)

  This page is a comprehensive guide, which will remove "Unable to connect to the proxy server" virus from your computer and any other adware program that may have been installed during the installation process.
  Please complete all of the steps in the correct order. If you have any questions or doubts in any point, STOP and ask for our assistance.
  STEP 1: restore the default proxy to your machine settings
  STEP 2: remove failed to connect to the ad software proxy server from Internet Explorer, Firefox and Google Chrome with AdwCleaner
  STEP 3: delete impossible to connect to the proxy server with Junkware Removal Tool browser hijacker
  STEP 4: delete impossible to connect to the virus pop up server proxy with Malwarebytes Anti-Malware free
  STEP 5: check a second time for the "unable to connect to the proxy server" malware with HitmanPro
  (Optional) STEP 6: delete impossible to connect to the proxy server of Internet Explorer, Firefox and Google Chrome ads

  http://www.geckoandfly.com/9275/Internet-connection-error-unable-to-connect-to-the-proxy-server/

  It is with IE

  Step 1 - launch Internet Explorer

  Step 2 - Click the icon "but" it looks like a gear wheel...

  Step 3 - select 'Internet Options '.

  Step 4 - Select the 'connection '.

  Step 5 - Click Lan settings

  Step 6 - uncheck "use a proxy server for your LAN (these settings may not apply to dial-up or VPN connections)."

  Step 7 - click 'Ok' to save the changes

  If you are using a proxy server, check your proxy settings, or check with your network administrator to make sure that the proxy server is running. If you don't believe that you should use a proxy server. Here's a video tutorial:

  Also, if you can since I don't remember which browser your help that gave you this message that I had to go with IE as a default.

• HP8600 does not connect to the ePrint Server

  HP8600 does not connect to the ePrint server at all. I double checked all the settings and I can print to it from my applications when you are connected to the same network, but try to access the server of ePrint from the screen of the printer or the web interface cannot establish a connection.

  The printer is connected via a wireless network and can be printed from any device connected to our network.

  Everything indicates that there should be good. But can't seem to make bad connection ePrint. No error message not developed.

  The printer is on a network of b/g/n 2.4 GHz connected to a Netgear N600 DUal Band (WNDR3700 model).

  Version of the firmware of the printer is CLP1CN1232AR

  Any ideas? It does not appear to be blocked by a firewall, so really lost here.

  Hello

  Try to define an alternative DNS and check if that can help you:

  1. Tap the wireless on the top of the screen of the printer and look for the IP address is.
  2. Navigate to throguh IP of the printer, the web browser on your PC.
  3. Click the network tab.
  4. Under, click IPv4 wireless.
  5. Under the DNS Configuration, select manual.
  6. Set the address preferably as 8.8.8.8
  7. Set the e-mail address alternative as 8.8.4.4
  8. Click on apply to confirm the change.

  Now, turn the printer off and turn it back on and check for the difference.

  Shlomi

• Windows Media Center - not the initial download put in place data for guide "unable to connect to the remote server.

  Hello

  Looking for help on this one...

  I have a new install of windows 7 pro running, and I was not able to get the guide to download Windows Media Center.   I am up-to-date with all the updates and SP1 version running.   My video card drivers are also updated.

  I use HDHOMERUN PRIME equipment with cablecard and who receives a TV signal very well and I am able to view it in WMC.    I use Verizon FIOS and my zip code is 07452.    Before this computer, I ran the cablecard even with a ceton infinitv and had no problem Guide at all.

  It's just that I can't download the guide data.  Its just totally blank.   I receive the channels and view them, but there is NO data.      Whenever I run the TV setup the same question comes up.  Cannot download the initial configuration data due to the error of previous download.   As far as I know, there is NO error message when Windows installed... actually... I reinstalled windows completely and this has not solved the problem.    I tried to manually download the guide which did not help.   It... nothing happened when I turned 'on' and 'off' WMC in Control Panel to reinstall.  I even tried explore the ehome folder and remove the file db... but nothing is helping.

  I can't find a file mcupdate.exe light on my system - don't know if this is relevant.   When I looked in the event viewer here are some of the error messages that I see.

  Impossible to extract the EpgLineups (error: unable to connect to the remote server)
  Impossible to extract the MCEClientUX (error: unable to connect to the remote server)

  I'm starting to think it's a matter of windows.   Anyone have any ideas?

  Mark

  E-mail address is removed from the privacy *.

  On Tuesday, September 23, 2014 00:32:35 + 0000, Mark_Sap_70 wrote:
   
  > I'm starting to think it's a matter of windows.   Anyone have any ideas?
   
  See this thread
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/is-the-Media-Center-Guide-download-service-down/f0a5ae10-00ea-4635-9177-12074fa7ee81?msgId=87f3f3b5-A485-4c41-8f35-43a4e2a75d7c
   
   
   
  __________________________________________________________________________________________________
  Barb
  MVP Windows Entertainment and connected home
  My Blog - http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   

• Using Reporting SERVICES report server cannot open a connection to the report server database in SQL server 2008 R2 sp1

  Hello

  I'm running Reporting SERVICES Version 2007.0100.1600.022 ((SQL_PreRelease). 080709-1414 in Visual Studio 2008 with Microsoft SQL Server 2008 R2 Express Edition with Advanced Services (64-bit) on Windows NT 6.1 SP1.)
  Everything seems to work fine except that I can't deploy: "the report server cannot open a connection to the report server database."
  Connection test ReportServer as OK in the Configuration service report manager and Visual Studio. Run reports in Visual Studio against ReportServer and my other databases.  Deployment fails on a report of VM. Remote access is enabled in the firewall, pipes is enabled in configuration Manager SQL server, the permissions for all access in Windows.
  The error in the log file of report Service:
  Library! WindowsService_1! 12ac! 09/23/2012-21: 05:12: e ERROR: ServiceStartThread: Exception caught during the startup of service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerDatabaseUnavailableException: the report server cannot open a connection to the report server database. A connection to the database is required for all applications and treatment. ---> System.Data.SqlClient.SqlException: a network-related or instance-specific error all by establishing a connection to SQL Server. The server is not found or inaccessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - error Search Server/Instance specified)
  Any ideas?
  Thank you.
  -Phil

  Just, I solved the problem I had.

  It turns out, there, there were two questions... first concealing the second.

  SQL Web browser has not been activated.  solution: in properties SQL server configuration manager, transformed the startup to automatic mode and activated the service.

  Microsoft Visual Studio project property targetdatasourcefolder had a server name that precedes the name of the folder. Removed the name of the server.  This works.

  Everything unfolds right now.

• HP 8500 printer and connection to the eprint Server

  Given to nine printer: HP Officejet Pro 8500 A910 n Premium (changes the status back to renovated 17/02/2011)

  ISP: ATT DSL

  Modem/router: 2wire new from Best Buy. It is white with ATT logo on it. Using the latest firmware.

  Network: ethernet

  The printer downloaded and installed an updated after initialization. If it is connected to the internet.

  Then tried to register the server says that it cannot connect to the server of the eprint and eprint.

  The functions of the printer normally in all directions except that it will not fit on eprint server.

  Many calls and hours with the reboot, reset HP support and everything else under the Sun did nothing.

  I tried to place the IP addresses and DSN by any suggestions on these forums and nothing works.

  Could there be a problem with the HP Sever? Does it really exist? Are there problems of compatibility with 2wire router.

  ATT session remotely on my computer and could find nothing they could do. They were able to draw a page of remote test.

  Any suggestion or help would be greatly appreciated. Thank you.

  NEW INFORMATION (11/02/2011):

  I noticed today just by looking at the integrated Web server, printer SSID is not the same as the router, but it is grayed out. Is it important for ethernet? If so how can I change? I don't think it's important for the ethernet.

  NEW INFORMATION (12/02/2011):

  The 2wire support team gave me the procedure to open completely all the in and out traffice to the printer. They said that if it does not, then the problem is with the eprint server. I'll try this Monday, but I expect a communication problem between the printer and the eprint server that does anything at my place or my ISP. Is it possible to check this printer is trying to connect to the server? Where is he? Is it operational? If this is not the case, is it rerouted properly to a working server? The printer must attempt to access an IP or DNS address to establish communication magnified.

  NEW INFORMATION (14/02/2011):

  According to the 2wire support team I opened all the ports and enabled all services then turned the printer market. It did not work. The printer does not connect to the HP eprint server. So the problem is with the HP eprint server. This printer is programmed to search for a server to connect to somewhere. Where is he? Is it operational? Why will not allow a connection? HP, the ball is in your court. What can we do?

  I have ATT DSL at work and at home Charter cable service. The problem is the same for the locations and ISPS. Y does it have that someone out there has connected to ATT DSL or cable of the Charter? If so, what are your settings?

  NEW COMMENT (15/02/2011)

  Can someone at HP tell me why the printer connects to the server HP and download the firmware update, but does not connect to the HP Server to register for eprint? All this seems to be on the side of HP. When do we get a fix?

  NEW COMMENT (16/02/2011)

  The model number is empty in the Engineering menu and page printer card. If there is a problem can be added with an update of the firmware? What I need to get money for it and buy one set entirely in a local store? Virgin model number is maybe to throw all other incongruous information that is sent to the server. The server can be updated to accept Virgin model numbers?

  THE PROBLEM - SOLUTION PENDING POSSIBLE SOURCES (16/02/2011)

  I JUST LOOKED AT THE BACK OF MY PRINTER. IT HAS A STICKER ON IT RECONDITIONED.

  It seems that the number of missing on the remanufacturered units model is the reason why it does not connect to the eprint server. Print the diagnostic printer page and see if the model number is empty.

  HP is working on a fix.

  SOLUTION-(22/02/2011)

  I UPGRADED MY ORDER WITH RENOVATED WITH NEW REPLACEMENT. THE REPLACEMENT AGAIN CONNECTED THE FIRST TIME TO THE SERVER EMPRINT - NO PROBLEM. I HAD TO PAY FOR A NEW AND THEY WILL CREDIT MY CARD WHEN THEY REACH THE RENOVATED A RETURN.

  LESSON LEARNED - IF YOU HAVE THE PRINTER WITH THE VIRGIN MODEL NUMBER YOU CAN NOT CONNECT TO EPRINT, NO MATTER WHAT YOU DO!

  Thanks if anyone can help.

  SOLUTION-(22/02/2011)

  I UPGRADED MY ORDER WITH RENOVATED WITH NEW REPLACEMENT. THE NEW REPLACEMENT CONNECTED FIRST TO THE SERVER EPRINT - NO PROBLEM. I HAD TO PAY FOR A NEW AND THEY WILL CREDIT MY CARD WHEN THEY REACH THE RENOVATED A RETURN.

  LESSON LEARNED - IF YOU HAVE THE PRINTER WITH THE VIRGIN MODEL NUMBER YOU WILL NOT BE ABLE TO CONNECT TO EPRINT, REGARDLESS OF WHAT YOU DO!

• Can't export virtual machines: unable to connect to the remote server

  Hello

  I'm working on vSphere client 5.1 (vCenter Server 5.1). Trying to export a virtual machine for distribution model. When I go to file-> export the template OVF..., I get the following error message:

  Can't export virtual machines: unable to connect to the remote server

  Remote not sure what/who he is not able to connect to. If I connect vSphere Web Client and navigate to the same model (or all other models), under 'All the Actions of vCenter' I don't have an option to export to the model of the FVO. But if I use a VM machine instead of a virtual machine template, I have the ability to export to the OVF, but it is grayed out.

  Am I missing any customer authorization or plugin for vShpere?

  Discovered that vSphere server had some modifications made by HIM to resolve the violation POODLE. HE had to set the ip address of the machine where export OVF will be performed. Which allowed the connection to establish vsphere client and perform an export of the FVO.

• Unable to connect to the host server: a connection attempt failed because

  Hi all

  I install my host ESX server in vmware workstation.  It works fine except when I am creating virtual machines.

  I'm not able to install the operating system on the virtual machine and I get this error that appears inside the virtual machine.

  Unable to connect to the host server: a connection attempt failed because the connected party did not respond after a certain time, or established connection failed because connected host has no

  to answer.  Do you want to retry?

  My ESX server hosts have static IP addresses.

  I've seen a few similar posts on this issue, but their solutions have not worked for me.

  Best regards

  Nathan

  I think we confuse you.  ESX server is running like a machine virtual within the workstation, correct?  If Yes, then you must edit the vmx esx server with these entries monitor configuration file *.  They can go anywhere in the file.  Once those have been added, you should be able to run 32-bit virtual machines within the esx server.

  -KjB

  VMware vExpert

• Connect to the SQL Server

  After the upgrade to MX7 of CF5, I am unable to establish a SQL Server connection. The SQL Server is Windows 2000 with Service Pack 4. Authentication is SQL Server and Windows. Establishing a connection (no user name or password depending on the documentation) causes this error:
  
  

  Quote:
  Connection verification failed for data source: YesOrNoSQL
  java.sql.SQLException: [Macromedia] [SQLServer JDBC Driver] could not establish a connection, use integrated security: No. LoginModules configured for JDBC_DRIVER_01
  The root cause was that: java.sql.SQLException: [Macromedia] [SQLServer JDBC Driver] could not establish a connection, use integrated security: No. LoginModules configured for JDBC_DRIVER_01

• Last update has screwed up to connect to the IMAP server.

  The last update for Thunderbird seems to have changed something so that the connection to the IMAP server. All new messages downloaded but have not read a 'Loading Message' in the status bar. When it finally disappears content downloadable (web related) does not appear. In addition, I can send is no longer emails. The server times out. Worked fine yesterday.

  To diagnose problems with Thunderbird, try the following:

  • Restart the operating system in safe mode with network. This loads only the basics needed to start your computer while allowing Internet access. Click on your operating system for instructions on how to start in safe mode: Windows 8, Windows 7, Windows Vista, Windows XP, OSX

  If the safe mode for the operating system to resolve the problem, there are other software on your computer that is causing problems. The possibilities include but not limited to: AV scanning, virus/malware, background downloads such as updates of the program.

• Download latest towers "connecting to the update server", will not download

  I tried to download the latest version of Firefox for the last 5 days on different internet connections. He turns and hangs on "connecting to the update server". The download will not be completed. Can you please help? Thank you.

  To install Firefox on a Mac, follow these steps:

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Delete Firefox in the Applications folder.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  If the download is interrupted, check the reasons for it: if it's a low slow connection, it would be wise to seek a faster point to connect.

  Please report back to see if this helped you!