For Fast Ethernet SFP modules

Similar Questions

• driver realtek RT8139/810 x Fast ethernet for HP CQ58-d57SR adapter

  Take the new HP compaq CQ58-d57SR. Search help driver realtek RT8139/810 x Fast ethernet for Win7 32 adapter?

  After installation position rezult pilot will be negativ. Run Auto search on internet, win7 see adapter ok

• The model name of my DM9601 To Fast Ethernet adapt is DM9601 to Fast Ethernet Adapterhas has stopped working correctly because a compatible driver is not available for this version of Windows.

  has stopped working properly because a compatible driver is not available for this version of Windows.  This is the error I get and it made my computer unable to re boot. Please help me how to set right.

  Thank youy

  Hello

  you left in the name of material on

  DM9601 USB to Fast Ethernet card; fix?

  and sorry, but I cannot find a driver for him after XP

  you are also posting in the wrong forum

  Try the forum hardware and drivers

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware?page=1&tab=all

  or contact the hardware manufacturer

  they write drivers for their products, not from microsoft

  ______________________________________________________

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Spectrum X 360 13: adapter usb to fast ethernet for X 360

  My spectrum X 360 comes with a USB fast ethernet adapter manufactured by Asix. Type AS88772A.

  When I use it on another computer, it installs and works fine. But on the spectrum: not a beep. I tried to remove the drivers, reinstall the adapter with the drivers directly from the manufacturer (HP does not provide any driver on his site), threatening even the stupid thing, but no go. There is a recovery partition to win 8.1

  Anyone know this problem and maybe even have a solution? Thnx.

  Rob.

  The problem has been resolved.
  I did a full restore from the recovery partition and I upgraded to win 10. It works fine now. I couldn't not to identify the cause.
  Rob

• Cisco WS-C3750X-12 s - S SFP modules

  Dear team

  I required 12 new sfp port switch I chose WS-C3750X-s-12s
  for my requrement is here my question is...

  Is I need to add separate trancievers SFP for this switch or not?

  Care technical I have not found that rock come alongwith 12 trancievers then how can I configure this procudt

  Hello

  The X Catalyst 3750 - 12s switch is a based FPS you don't need SFP transceivers. Take a look at table 6 to the Cisco Gigabit Ethernet transceiver Modules compatibility matrix for details on the supported transceivers and the OS release that they are taken care of.

  Concerning

• If I remove the Reaktek RTL 8139/801 x program Fast Ethernet NIC family in my PC it will affect my internet access even if it is not make it now

  If I remove the Reaktek RTL 8139/801 x program Fast Ethernet NIC family in my PC it will affect my internet access even if it is not make it now and apparently it works either way because I get a message that it is unplugged and I tried to fix and it tells me to insert a cd, which I did not.

  Hello

  You must have the drivers for the RTL 8139 NIC - you can download it from the Web to Realtek site - here is the link:

  http://www.Realtek.com/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=6&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  LC

• Update the driver Via Rhine II Fast Ethernet Adapter

  Help, please!

  I can update my Via Rhine II Fast Ethernet Adapter driver with the 3.84.0.1 64 bit version of Windows XP same dough I'm running a 32-bit Windows XP?

  I could not find a version to 32 bit Win XP.

  My current driver version is 3.32.0.417, and a few programs scan driver free, that I found on the Internet it were classified as 'old '. My Internet connection isn't going very well.

  My system information:

  Widows XP, home edition, service pack 3, version 2002, intel celeron 420 CPU @ 1.60 Ghz, 160 Ghz, 384 MB RAM

  Thank you very much and God bless you!

  Tiberiu, Romania

  # No, if it's only for XP - 64.

  A driver is 'old' does not mean that you need to replace.  The general rule for Windows drivers is, "if it ain't broke, don't fix it."  You should only update a driver if the device does not work correctly and you have reason to believe that the driver is at fault, or (b) the new pilot adds features that you want or need.

  OTOH, if you go to the real Web SITE (instead of random file download sites), you can find a driver for XP 64 and XP (i.e., XP-32) who seems to be newer than yours - version 3.87.  This driver is for the following models, which can be yours (you have failed to identify the specific model you have).

  Integrated VT8251, VT8231, VT8233, VT8235 & VT8237 integrated (Rhine & Rhine II), VT6103 Rhine (PHY), VT6105/L/LOM and VT6106/H/L/S series (Rhine III), VT6105M management Fast Ethernet Controller (Rhine III), VT6115 Fast Ethernet Controller (Rhine III), VT6107 Fast Ethernet Controller (Rhine & Rhine II)

• Realtek fast ethernet card does not work on laptop with Vista

  My realtek fast ethernet does not work with my windows, what can I do about it?

  I have no internet access on my laptop

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• Cisco SFP module name

  What is the difference between the module two next?

  SFP-GE-L = vs SFP - GE - L, we have = to sigh at the end and others are not.

  http://www.Cisco.com/c/en/us/products/collateral/interfaces-modules/Tran...

  SFP-GE-L	1000BASE-LX/LH SFP (DOM)	GLC-LH-SMD	1000Base-LX/LH SFP transceiver module, MMF/SMF, 1310nm, DOM	-
  SFP-GE-L =	1000BASE-LX/LH SFP (DOM)	GLC-LH-SMD =	1000Base-LX/LH SFP transceiver module, MMF/SMF, 1310nm, DOM	-
  SFP-GE-S	SFP 1000BASE-SX (DOM)	GLC-SX-MMD	1000BASE-SX SFP transceiver module, MMF, 850nm, DOM	-
  SFP-GE-S =	SFP 1000BASE-SX (DOM)	GLC-SX-MMD =	1000BASE-SX SFP transceiver module, MMF, 850nm, DOM	-

  For all Cisco SKU (Stock keeping units), the '=' at the end means a piece of spare or ordered separately article.

  Without a '=' means usually the exact same item is ordered in a parent configuration - for example, a SFP as an optional part of a module switching.

  They are exactly the same physical part.

• DWDM SFP modules - where to use?

  Hi, we intend to interconnect two sites using DWDM. What type of SFP modules (color, color No 1310) should we use on our connection to the multiplexer/OADM switches? Does rely on the real device of MUX?

  DWDM and OADM multiplexers filters have ports specific wavelength, which are connected to an optical transmitter/receiver of the same wavelength.  Here is a link to the pluggable optical transceivers of Cisco DWDM

  http://www.Cisco.com/en/us/products/ps6576/index.html

  Cisco DWDM filters options linked below:

  http://www.Cisco.com/en/us/prod/collateral/modules/ps5455/product_data_sheet0900aecd806a1c36.html

  http://www.Cisco.com/en/us/products/HW/optical/ps1996/products_data_sheets_list.html

  Optical TRANSCEIVER for hardware compatibility

  http://www.Cisco.com/en/us/products/HW/modules/ps5455/products_device_support_tables_list.html

  Let us know if you have any additional questions.

• Realtek Fast Ethernet Controller RTL8139 works do not under Windows 7.

  I have a problem getting my Realtek Fast Ethernet RTL8139 controller working under Windows 7. During my first installation of windows, in which the controller was visible device manager, I think to remember, but after the first reboot, it disappeared.
  I have two controllers active ethernet in my system, the first one mentioned above and the second: Realtek RTL8168C (P) / 8111C (P) Family PCI - E Gigabit Ethernet NIC (NDIS 6.20) [on board].
  Certainly, the controller who is not found is working because LEDS are light when I connect the card to a cable. The other computer that is connected to my PC even shows that a 100 Mbit connection has been created (with problems though). However, it is not possible to communicate.
  I already tried to install the latest drivers from Realtek for Win7 page (dated on the 22.09.2009) but it did not help.

  System Specs:

  Processor: Pentium Dual-Core CPU E5300 @ 2.60 GHz
  (Vivid RAM) memory: 4.00 GB
  Graphics: NVIDIA GeForce 9500 GT

  System

  Manufacturer: Gigabyte Technology Co., Ltd..
  Model: G31M-ES2L
  SystemType: 64 Bit - OS
  Number of cores: 2

  Network card:

  Realtek RTL8168C (P) / 8111C (P) Family PCI - E Gigabit Ethernet NIC (NDIS 6.20) [work]!
  Realtek RTL8139 Fast Ethernet Controller (NDIS 5.1) [DOES not work!]
   
  OS: Windows 7 Professional (Version 6.1.7600)

  Hello

  Uninstall the audio player of the program and features.

  Then install the Realtek driver by downloading it from the link below:
  http://America.Giga-Byte.com/filelist/Driver/motherboard_driver_audio_realtek_azalia.exe

  Cheers and enjoy... :))

• HP J4853A and Cisco SFP Module 100BASE-FX

  Hi all!

  HP J4853A and Cisco SFP Module modules 100BASE-FX is not compatible?

  Thank you!

  Both are 100Base FX for at layer 1, they are interoperable.

  Higher tier features will not be handled on one platform or another.

• SG500 5 GB SFP module

  Hello

  I was wondering what fiber SFP module that I use to stack 5 GB SG500 referrals.

  In the data sheet it is said SFP - 10 G - SR can be used for battery of 10 GB switches of SG500X, but does not say if she can or cannot be used on the SG500.

  I use mulitmode fiber and the distance is less than 200 m.

  Thank you.

  Tom, this was to be the most infuriating conversation to read. The poster kept asking what FPS to use for exploitation at 5G FIBER, and you kept giving him options of COPPER to a limited cable length. He said several times that length copper SFP fixed does not work because of the switches being some distance.

  Girard, according to the Guide of Directors, 10GbE fiber will only work at speed and can not 'falling' at 5GbE. There is no module fiber that run to 5GbE, only 1 GbE and 10 GbE. If you need fiber, your uplink is limited to 1GbE, as the SG500 does not support fibers 10GbE.

  See the guide for more information (Page 66/67):

  http://www.Cisco.com/en/us/docs/switches/LAN/CSBMs/Sx500/administration_guide/500_Series_Admin_Guide.PDF

• Realtek RTL8139/810 x Family Fast Ethernet NIC #2

  Hello

  I recently bought windows 7 ultimate and am ready to upgrade to windows xp day, but just need an answer to the question.

  I have a Realtek RTL8139/810 x Family Fast Ethernet NIC #2 adapter and when I run windows 7 upgrade advisor it shows that it is compatible, I wonder what I have to install the drivers/software for this after installing Windows 7 or just install my internet as usual?

  Thank you

  You shouldn't do anything. The driver should be installed automatically.

  Thank you
  Chris

• Windows 7 Upgrade Advisor - Rhine II fast ethernet ADAPTER

  I am currently running XP SP3 32 bit on AMD Athlon 64, 2 GB RAM machine.  I want to upgrade to Windows 7 64 bit.

  I read this: http://windows.microsoft.com/is-IS/windows7/help/upgrading-from-windows-xp-to-windows-7

  I ran the Windows 7 Upgrade Advisor - version 64 bit says 9 questions, 8 of whom are software (Adobe, shockwave, .NET 1.1, etc.), but that makes me nervous is VIA Rhine II Fast Ethernet adapt driver would need to be updated.
  I run Belarc and identified as VT8237 chipset. so I downloaded the latest driver here: http://www.via.com.tw/en/support/drivers.jsp and got the 3.87 driver version dated Date may 5, 2011.
  I have re-ran Upgrade Advisor, and it is still showing that I have to get the latest driver.  I have the latest driver, using my CURRENT operating system to choose.
  Do I need to download the driver for the VT8237 selecting Windows 7 as OS?

  You need to download and save the driver Windows 7 for the VT8237.

  After the upgrade, you must apply the driver. Until you install the Windows 7 driver after the update you will not be able to access the internet.

  It would be wise download and save all drivers Windows 7 you might need for your system.

  The upgrade cheaper, assuming that the offer is available where you are, is to upgrade to Windows 8 at price special launch. You'll need the drivers Windows 8 If you did.

  Given that you want to move to 64-bit, you must upgrade to a club. If you have access to a 64-bit system, you can buy and download an upgrade in line 64-bit on this system. The upgrade is not bound to the system on which it is downloaded.