For MS WIndows server 2008 Remote Desktop does not work.
Hello
We have the following.
1 VMware 5.5 Vsphare
2 virtual MACHINE working with MS Windows 2008 ent.
3 SAP on this server load balancing.
4. his joints to a domain
Now, we have enabled RDP and used a user can access to hold off.
but when we take RDP and entered the IP address on the server mentioned above. It gives the error that the RDP is not activated.
What we did...
1 checked any local policy or domain... no problem
2. check that the RDP port is listened to... no problem
3. has changed the port 3389... nothing happened.
4. check for any firewall issue... Order the Windows Firewall... Still nothing...
Checked port 3389 with telnet... its not going is not to...
Help, please...
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
Tags: Windows
Similar Questions
-
Windows Server 2008 - Group Policy does not
Hello
I recently deployed a windows 2008 (32 std) additional domain controller for our windows 2003 DC. and I moved to make PDC FSMO roles in 2008. now I get error when I open Group Policy and none of the policy is to take users. the error is "the network name is not found.
I run the command adprep/adprep domainprep/gpprep command when I deploy the windows Server 2008. below error, I get in the event viewer for the same thing.
"The Software Installation Group Policy Client Side Extension was impossible to apply one or more parameters, because the changes must be processed before logon startup or user system. The system will wait for the treatment group strategy to finish completely before the next startup or logon for that user, and this may result in slow startup and startup performance '.
Please advice. Thank you
Hello
Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the following forum:
http://social.technet.Microsoft.com/forums/en-us/categories/
-
Windows server 2012 RDP Clipboard does not work for regular users
Hello again,
I wanted a little more secure our 2012 server.
I disabled via GPO, local disk and printer redirection when a user connect through rdp.
But I activated the policy to users, so while you can do the redirection of the Clipboard between there pc and rdp Server (copy / paste)
Problem is that it works in only for the admin.
The fact that local drive redirection is disable that copy / paste does not work?
Force the update of the Group Policy object and I sign the user out and reconnect and copy and paste does not work
and also, the process rdpclip.exe is running. I have restart this process.
Any help or guide
Thank you once again.
Hello
As I mentioned in your other Thread that we do not respond to server problems in this community.
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
Remote Desktop does not work since MacOS Sierra update
Unable to connect with Remote Desktop or cord that worked before update
Greetings geoffshop,
Thank you for using communities of Apple Support. It seems you want to use under macOS Sierra remote desktop, but it does not work.
I recommend you read this article, it has the settings you want to check to make sure that it is able to work.macOS Sierra: allow remote desktop to access your computer
Take care.
-
Remote Desktop does not work after trying to use it to connect outside my home network.
original title: Trouble with Remote DesktopRemote Destop worked very well with my desktop (Win 7 Pro) laptop (Win7 home prem) and then I tried to configure RD off-grid and now even can't do within the home group. Port 3389 is open, I checked. It also goes further than "Remote configuration connection" and then expires.
Is there a way to reset by default? If not, what are the default settings in Advanced Options?
Can't believe how difficult it is.
Well, a test of telnet with success from the RDC client to a host DRC looks like this. An empty window telnet with a blinking cursor.
http://CID-25ab668da65c8fbe.photos.live.com/self.aspx/Windows%20images/RDCSuccessfulTelnetTest.PNG
A fruitless of telnet test looks like this. You get a can't connect message.
http://CID-25ab668da65c8fbe.photos.live.com/self.aspx/Windows%20images/RDCUnsuccessfulTelnetTest.PNG
Based on the fact that PortQryUI reports that the DRC host is listening on TCP Port 3389, it seems to me that something on this machine is blocking incoming RDC connections if I read your log file.
You have run PortQryUI on the RDC client on your local network? Which will probably appear the same as the telnet test. Here is an example of a successful test of a DRC DRC host test client.
You run any third-party anti-virus/malware software?
You run a VPN client as a customer of Cisco for example? I've seen reports in the past of the clients VPN Cisco blocks requests from the DRC.
FWIW, you can take screenshots with Windows 7 built-in Snipping Tool and then publish them on SkyDrive and post links on the screenshots. Its easier than trying to browse a lot of ascii text... MY HUMBLE OPINION...
-
Sound is delayed for chimes window base that other sound does not work.
I changed a setting on this computer and now my sound doesn't work properly. I don't know what changed, but the sound of windows as the Bell and Carillon take about 10 seconds to play. I can't use windows MediaPlayer, told the piloted is obsolete, but I checked and the update said: I have the latest software. I tried the troubleshooting of windows but it couldnot find a problem. I would like to make audio beats on a dv7 6b63us.
Hello
In this case, try the following.
Download IDT Audio Installer on the link below and save it in your downloads folder.
http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59542.exe
One time finished, open windows control panel, open Device Manager and open sound, video and game controllers. Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.
When you are finished, download and reinstall the Chipset driver at the following link.
http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55095.exe
After reinstalling Chipset, stop the laptop, unplug the AC adapter and then remove the battery. Press and hold the Power button for 30 seconds. Reinsert the battery and plug in the AC adapter.
Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu. Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER. Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.
Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete. Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation. Once this done, do a right-click the speaker icon in the taskbar and select playback devices. 'Speakers and headphones' left click once to highlight, and then click set as default.
Restart the laptop once more.
Kind regards
DP - K
-
Remote Desktop does not work after the recent update to VMWare Player, why?
I have VMWare Player installed on a host with multiple virtual machines. I like to the DRC to the remote host and I've been in months, but in the recent update to VMWare Player, my connection to the DRC has dropped. Now when I try to the DRC to the host it hangs at "Estimate the quality connection" after I get my user name and password, but then it stops without errors or messages. I've updated the host and rebooted several times, I also tried to DRC from a computer on the same local network as the host with no result. I have a friends in exactly the same problem, connection dropped in the middle of the update and no resolution yet. Help?
I uninstalled VMWare Player and did a clean install (rather than updating an earlier version) and the problem is solved!
-
Remote Desktop does not see HP 8500
My remote desktop does not see my new HP Officejet Pro 8500. He's always seen my printers in the past, including my HP Officejet Pro 7600 on Windows 7. I can't understand what setting I have to miss.
Finally, I figured out, and I'll post it in case anyone else needs help. MY remote desktop is accessible via the Terminal Server (Windows 2003 Server) services. the driver must be loaded on the server is available with this link:
OJP8500vA909_corporate_12_en.exe
After you have installed the driver on the server, install the printer through "add a printer", local option and uncheck "auto detect." Find the driver on the list, and then install the printer. Then you should be able to see it on the server.
If you then install it on a remote desktop (through the Terminal Server services), download the driver 8500 on remote desktop, install the driver on the desktop through "add a printer". Right click on the printer on the "printers and faxes" screen and view properties. Go to "ports" and find a port that communicates with your printer.
IT seems that a special driver must be installed on the server, and then the standard printer driver must be installed on the remote desktop.
-
The foot pedal RS27 and Olympus AS-5000 - work of transcription for Windows 8 or 10 (pedal does not work on Windows 7 and do not want to shell out $300 to Olympus again)
Any help Nauru will be stuck with Windows Vista, I had to get three versions of Olympus and their pedals over the years and all they do is change the wiring or jacks, stupid as * I just like five different types.
Desperately need to know if these pedals will work or does he know about the Sony or another software of transcription for the typist, not the dictator.
Help.
Hi Marvin,.
Thank you for the quick update.
Yes, I understand your question. However, if the programs worked with an earlier version of Windows, they can work with Windows or Windows 10 8.1 if you install programs in compatibility mode. If you access the executable file (.exe) for the game, I suggest you follow the steps provided below:
Step 1: Download and save programs on the desktop.
Step 2: Install the programs in compatibility mode.
- Right click on the .exe file and click Properties.
- Go to the compatibility tab.
- Check the box for run this program in compatibility mode for:
- In the list of operating systems, select Windows Vista (or any other compatible OS) .
- Click OK.
- Double-click the executable file to install the program and follow the instructions on the screen.
- Restart your computer.
Additional information:
Make the programs more compatible with this version of Windows
Hope this information is useful. Let us know if you need more help, we will be happy to help you.
-
Recently I got Dell reinstall Windows for me, and they have restored the backup I had. Everything seemed to work fine. I was re - install my apps, some of the original CD and a few downloads. I also updated to SP 3 Windows.
Now the things on my desk does not work.
1. the command run disappeared from the start menu. I went into the properties of the start menu and checked so that it should be established, but it doesn't show up.
2 double click on any icon on my desktop does not work. To open an application that I right click and select 'open '.
3. no provision starts from the start menu.
4. the quick start icons come that if I go into the properties of the start bar and set it and then it doesn't show up when I restart the PC.
5. nothing in the Quick Start bar opens with a single click.
6. the search does not work when I right click on start and select search.Since the command run does not appear I can't service table to determine if the necessary services are defined.
I'd appreciate a lot any help to get back on track.
Glad to hear that everything got sorted out ultimately, and good luck in the future!
-
Satellite X 200 - after upgrading Vista remote control does not work
Hello
I have upgrated my Vista Home Premium to Vista Ultimate and the remote control does not work. Well upgraded... I bought Vista ultimate and it installed.
Is there a driver for my remote?
You may need to install the infrared driver.
This driver is required to activate the infrared port on your laptop.You can find it here in the X 200 section
http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp -
Satellite P100 remote control does not work
Hello
Guys, I bought a toshiba satellite p100 and the remote with it does not work...
no idea why? the battery must be fully charged... but when I press the buttons of the led on the remote control does not work or the other...
Help, please...
Thank you...
Post edited by: qazam
Hi Qazam
How did you test the remote control?
What do you mean who does not? Some functions does not work or a complete remote control cannot be used?I read the user manual and it seems that the remote will work under Windows mode with WinDVD or Express Media player, and Windows Media Player when the laptop was not started in the Windows operating system.
-
Try to download and install Windows Live Messenger, but it does not work.
Original title: im trying to download windows live messenger but his does not work although the Messenger, I was downloading is compatible to my pc
How can I install windows live
Hi asian1955,
Have you tried to download Windows Live from here: http://explore.live.com/windows-live-essentials?os=other this is the latest version of Windows Live. Once you start to install, simply install the components you want, there is no need to install anything if you do not need.
This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.
John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com
-
updated my driver for my Ethernet controller and now it does not work
Original title:
Network network network Ethernet device
I updated my driver for my Ethernet controller and now it does not work... I can't put it up, are the only choices that I
to establish a wireless connection or set up a broadband connection using a user name and password but my ISP does not require
a kind it will not accomplish the connection in place, I use win 7 64, how do I fix this so I can use my connection ethernet again?Hello
You can try the following steps and check if it works:
Method 1:
You can restore to an earlier device driver if you are having problems with your computer or device after upgrading the driver.
Restore a driver with its previous version
http://Windows.Microsoft.com/en-us/Windows7/restore-a-driver-to-its-previous-version
Method 2:
If the steps above fail then you can perform a System Restore to an earlier point when it was working fine.
It will be useful.
-
I have tally 7.2 work well in Windows 7, but when I installed window 8, tally 7.2 does not work, how can I solve this problem
Hello
Thanks for posting in the Microsoft community!
I'm sorry to hear that tally 7.2 does not work with Windows 8. I hope that the steps helps you to solve the problem.
Before troubleshooting, provide us with information.1. what happens when you try to use tally 7.2?
2. you receive an error message?
3 is the issue limited to match 7.2?
You can check if the software is compatible with Windows 8.
Make the programs more compatible with this version of Windows
http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/home?language=en-usIf this is not the case, try to run the program in compatibility mode.
http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-WindowsCheck the event viewer for error logs.
a. move the mouse to the bottom left of the screen and right click to see a list of options
b. Select Event Viewer
c. click an event log in the left pane
d. double-click an event to view the details of the event. Events are classified as error, warning, or information, depending on the severity of the event.
Let us know if the suggestion provided was useful. If you have additional questions, we will be happy to help you.
Maybe you are looking for
-
Internet Explorer gives error messages
I continue to say that Windows Internet Explorer cannot find my requested Web sites. They appear then leaving me to close the error message. How can I stop this happening?
-
two-step verification solution
Anyone wishing to activate two concerns of audit step that Apple will not recover your account at any cost, if you activate this if you're responsible for it get locked anyway so I suggest you should do two icloud one account to use as the identifier
-
HP Officejet Pro 6830: Black and white printing
Hello, I hope someone can help me because this problem is driving me crazy. When I try to print something on the I do not have the option to print the selected page black & white print. BUT on the computer of my wife which is also a Macbook is the b
-
error 80048869 whatever that means
has brought a dlan highspeed adapter after installing it on the computer main, went upstairs to connect to this computer to it could not connect it message error 80048869 is have I lost my money or I'm doing something wrong!
-
Computer will not start after windows checkdisk thing?
My office has gone through a few microsoft checkdisk thing today (16\11\2010), and after that it's over, my com could not start more. It would be to start all the way until the logo Windows XP there and after loading was done and usually, it would be