For the creation of the site from scratch, where to go?

Similar Questions

• If my software update of the Appstore stops to say 1.3 GB of 6.4 GB due to network etc problem it back once again to 1.3 GB rear or all the way from scratch

  If my software update of the Appstore stops to say 1.3 GB of 6.4 GB due to network etc problem it back once again to 1.3 GB rear or all the way from scratch.

  Hello Anshul230499,

  Thank you for using communities of Apple Support.

  If a download was interrupted in the Mac App Store, then whenever you have new Internet download should then restart.

  If a download application is interrupted

  Once an Internet connection is restored, your purchased downloads should restart automatically. The Mac App Store may warn you that there is a problem with the download and ask if you want to restart downloads. Confirming will restart all pending downloads.

  Download time may vary according to the size of the file and the speed of your Internet connection. See this article on purchases made on iTunes Store for more information on the time to download large files.

  Troubleshooting the Mac App Store

  Take care.

• After I reset my Firefox browser"remember password for the site" options is disable.

  After I reset my Firefox browser"remember password for the site" options is disable.

  Hello karim138, firefox will not save your passwords when you put to execution in permanent private browsing mode ("never remember history" in options > Privacy panel).

  Privacy, historical settings of navigation and-no-track

• How to block the site from the db with Mozilla?

  How to block the site from the db with Mozilla?
  I noticed this file is blocked by some customers of Mozilla. Is this possible to Mozilla software and security settings?

  On another machine it works but the other cannot be connected to the database. This puts inside Mozilla technical possible?

  See:

  • http://KB.mozillazine.org/Parental_controls

• When I try to move a file of premises for the sign from cloud to cloud still negative?

  When I try to move a file of premises for the sign from cloud to cloud still negative?

  Hello

  Please see useful fair questions: where can I find links to management and creative Cloud files synchronization?

  Hope that helps!

  Kind regards

  Sheena

• No VRM server registered with vCenter Server for the site 'Live '.

  I have SRM 6.1 and vSphere replication 6.1 installed on both sites.

  The ECP is connected to the vCenter server.

  I get this error message: failed to create the protection group. No VRM server registered with vCenter Server for the site 'Live '.

  Screenshot attached, no one knows what is happening here?

  

  However, there was a mismatch in the meantime server on all except VRA in the remote site, it is now resolved and the issue disappeared.

  Strange, how the error related to the site online, however.

  Thank you for pointing me in the right direction.

• What are the hours for the sessions from tomorrow

  What are the schedules for the sessions from the 'tomorrow' or how to plan my own schedule?

  The materials for each week, starting March 31, will be available on the main page at 12:00 (midnight) GMT/UTC.

  The complete schedule is here: Details of the schedule for the MOOC (March)

• I downloaded Lightroom 6 thanks to Amazon and never received an email from Adobe with the serial number, I need to finish my license/registration for the product...where/how can I get the serial number?

  I downloaded Lightroom 6 thanks to Amazon and never received an email from Adobe with the serial number, I need to finish my license/registration for the product...where/how can I get the serial number?

  Hello dakineny,

  Please refer to the link given to find your serial number: quickly find your serial number

  It will be useful.

  Concerning

  Bianka Attre

• In the browser of Muse CC edition there was a problem reading the manifest file Adobe Muse CC for the site - how to fix this?

  I just uploaded the site via the built in ftp upload in muse he then uploaded successfully. When I go in the edition of the browser and enter the name of the site (mernaliddawi.com) it says then this "there was a problem reading the file of Adobe Muse CC manifest for the site. Since Adobe Muse CC use file > load on the FTP host... to export the new site. ' I then exported the site again, but it still does not work also, I went my hosting provider file manager and deleted the file muse_mainfest.xml and then re uploaded still no chance. " How can I fix this thank you, james.

  You need to transfer your domain to your new site. At present, the URL http://mernaliddawi.com/ is a web page that encapsulates the http://mernaliddawicom.ipage.com/ in a frameset. This isn't how a domain is successfully transferred. He doesn't bother with editing in the browser, will prevent redirection to versions Tablet and phone of your site (if you create), and can cause other problems.

  If you enter mernaliddawicom.ipage.com to inbrowserediting.adobe.com it will not work, because this is the URL where your site is currently hosted.

• A12E5 error when installing creative cloud for the premium from adobe flashbuilder 4.7 version

  A12E5 error when installing creative cloud for the premium from adobe flashbuilder 4.7 version. Please provide the solution to install the software. I have the license keys to install it.

  Hi rkcy100

  Please visit: http://forums.adobe.com/message/4562902

  http://forums.Adobe.com/message/4811565

• File menu Flash dropdown, drops down on the site from loading in the browser.

  File menu Flash dropdown, drops down on the site from loading in the browser.

  < removed by mod >

  Include code in your ad that deals with the appearance of the menu drop down.  Something is triggering fall without having to interact with him... It will take just a stop(); command in the script if it's an animation timeline.

• How can I automate the creation of a partition from scratch for a large number of hosts?

  I would like to help with the following steps to cerate a partition scratch on all hosts that have no script, then reprot back to me which guests were to have created.

  all my ESXi hosts have a LUN to start with the space, all the boot LUN are named with the same naming that is conveiton "hostname-localstorage.

  I would like to come up with a script that will check each host in a cluster for a partition of scaratch, if it does not create the folder ".locker -hostname" on local storrage and then set the partition scratching to the new location. Then the new report to me, which is already a partition from scratch and those to whom he owed create a parition scratch to so I can plan then a good time to put the hosts with newly created partitions scratch mainenance mode and restart their.

  I glued the manual way to do it below. I'd appreciate any help anyone can give and it will be well appreciated. I try to avoid to do 1000 hours below. Thanks in advance...

  Note: Before you begin, make sure that/tmp/scratch exists. If it does not exist, create it by using the command #mkdir/tmp/scratch.
  1. Open a command prompt where the PowerCLI is installed.
  2. Connecting to host ESXi using the command:
     
     connect-viserver ESXHostnameOrIP
     
     
  3. A list of the data stores accessible by using the ESXi Host command:
     
     Get-Datastore
     
     
  4. Mount a read/write as a PSDrive data store using the command:
     
     New-PSDrive -Name "mounteddatastore" -Root \ -PSProvider VimDatastore -Datastore (Get-Datastore "DatastoreName")
     
     
  5. Access the PSDrive new using the command:
     
     Set-Location mounteddatastore:
     
     
  6. Create a directory named only for the ESXi host using the command:
     
     New-Item "DirectoryName" -ItemType directory
     
     For example:
     
     New-Item ".locker-ESXHostname" -ItemType directory
     
     
  7. Check the current value of the ScratchConfig.ConfiguredScratchLocation configuration with the command option:
     
     Get-VMHostAdvancedConfiguration -Name "ScratchConfig.ConfiguredScratchLocation"
     
     
  8. Change the ScratchConfig.ConfiguredScratchLocation configuration option, specifying the full path to the directory created in step 6, using the command:
     
     Set-VMHostAdvancedConfiguration -Name "ScratchConfig.ConfiguredScratchLocation" -Value "/vmfs/volumes/DatastoreName/DirectoryName"
     
     For example:
     
     Set-VMHostAdvancedConfiguration  -Name "ScratchConfig.ConfiguredScratchLocation" -Value  "/vmfs/volumes/Datastore1/.locker-ESXHostname"


  9. The ESXi host in maintenance mode and restart so that the configuration change to take effect.

  Mike P

  I have something similar to use the script below.

  I think you'll find that your out in there.

  $configName = 'ScratchConfig.ConfiguredScratchLocation'
  
  $mode,$warn = Get-PowerCLIConfiguration | %{$_.DefaultVIServerMode,$_.DisplayDeprecationWarnings}Set-PowerCLIConfiguration -DefaultVIServerMode "Multiple" -DisplayDeprecationWarnings:$false
  
  Get-VMHost | where {$_.ExtensionData.Config.Product.ProductLineId -eq "embeddedEsx"} | %{    Connect-VIServer -Server $_.Name -User root -Password MyPswd    $scratch = (Get-VMHostAdvancedConfiguration -VMHost $_)[$configName]    $tgtName = ".locker-" + $_.Name.Split('.')[0]    if($scratch -notmatch ($tgtName + "$")){        $ds = Get-Datastore -VMHost $_ | where {$_.Name -match "localstorage"}        if($ds){            Set-Location -Path $ds.DatastoreBrowserPath            New-Item $tgtName -ItemType directory            Set-VMHostAdvancedConfiguration -Name $configName -Value ('/vmfs/volumes/' + $ds.Name + '/' + $tgtName) -Confirm:$false            Set-VMHost -VMHost $_ -State 'Maintenance' -Confirm:$false            Restart-VMHost -VMHost $_ -Confirm:$false            Set-VMHost -VMHost $_ -State 'Connected' -Confirm:$false        }    }    Disconnect-VIServer -Server $_.Name}
  
  Set-PowerCLIConfiguration -DefaultVIServerMode $mode -DisplayDeprecationWarnings:$warn
  

  It uses the DatastoreBrowserPath that Vitali has suggested.

• Windows 7 drivers for the TouchSmart from HP ENVY 15-j002eo

  Hello!

  The company I work for just bought a TouchSmart from HP ENVY 15-j002eo. It's the first of this model and it came with Windows 8 is installed. Problem is that we use Windows 7 as standard and Deploying via sccm 2012. According to the HP support site this computer does not have drivers for Windows 7, but I decided to try it anyway.
  

  The computer came with all the required drivers for Windows 8, almost all of them worked except two things...

  That's what I left in the device manager that I failed the difficulty:

  (USB) Universal Serial Bus controller

  Hardware ID:
  PCI\VEN_8086 & DEV_8C31 & SUBSYS_1967103C & REV_04
  PCI\VEN_8086 & DEV_8C31 & SUBSYS_1967103C
  PCI\VEN_8086 & DEV_8C31 & CC_0C0330
  PCI\VEN_8086 & DEV_8C31 & CC_0C03

  Unknown device

  Hardware ID:
  ACPI\HPQ6007
  * HPQ6007

  I have treid everyting I could think... Could someone help me this?

  Hello

  Is this the same post?

  http://www.sweclockers.com/Forum/67-Barbara-datorer-support-och-ovriga-tradar/1241326-drivrutiner-till-HP-envy-TouchSmart-15-j002eo-Windows-7-a/#post13929165

  For the second, copy the following driver:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-117749-1&cc=us&DLC=en&LC=en&OS=4132&product=5395193&sw_lang

  And may be the next driver to the first:

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=21129

  Good luck.

• Fully formatted my Sansa Clip, in any case I can reinstall the firmware from scratch?

  I've deleted some songs using a Mac but noted they were still playable from my sansa and when I plugged on a PC the files not found so I decided it would be a fine idea to format the thing and reinstall from scratch.

  I'm having a little trouble finding how do and now starting to worry that my pure idiocy has ruined my sansa clip for me.

  I was running Rockbox when this whole thing started, if that helps at all.

  When plugged into a computer screen 'Bootloader USB mode' bed and when unplugged it reads "File not found", then "USB Plug cable.

  Thank you!

  
  

• Win Vista Business 32-bit SP2 running: How can I get IE 8 to keep the user ID and PG for the sites?

  I'm under IE 8.0.6001.19019, with privileges for the Admin user, and I was not abe to understand why, unlike my other portable installation Win 7 SP1, as IE 8, I can't get the system to keep the user (not to mention passwords) ID I enter the website screens, for example: as my web Yahoo email account.  I have been through all the IE Tools / Internet options screens to see what I can and can't seem to find something there.

  Any thoughts?

  Block you cookies by moving the slider on the Privacy tab to the top or to a site from the list which is accessed through the Sites button. If this isn't your problem.

  If I remember well AVG Free scan deletes the cookies in a default scan. But it should be limited to tracking cookies.

  I'm not familiar with HotSpot Shield.

  You run like CCleaner cleaning software that deletes cookies?

  Apart from that, I am ideas. You could try to run without addons (type Internet Explorer in the area start search and select the no addons version) and see if this behavior persists.

  Just to clarify, the data is available if you navigate away from the site, then come back to open a session? Or is it only after close Internet explore and restart?