For the installation of new network configuration

Similar Questions

• VLAN again added, problems detected on guests during the detection of new network configuration

  Hi all

  I started facing a strange problem trying to use a new VLAN configured in my vCenter environment...

  Basically, my system 'fight' to identify the new network label (VLAN) configured, leaving systems disconnected from the local network.

  This condition disappears only when I change the VM touched, assign a label of different network (VLAN), apply the changes and restart the process by configuring the new VLAN return.

  We will use an example to explain better:

  • I have a named Windows Server/Workstation VM: VM1
  • I have 2 VLANS configured in vCenter: VLAN50 and VLAN70

  VM1 is sitting on the VLAN50 and has the static IP address configured.

  I start the migration of the machine to a VLAN different, by editing the network settings of the operating system (IP, MASK, GW, DNS entries...) and replace the label of VM1 VLAN70 network.

  At this point, the machine NIC shows as if it could not connect to what in the network, although it is configured accordingly in order to communicate in the new subnet.

  I have change the VM again and change the label of a network VLAN different from VLAN70, click OK. Immediately, I change VM settings to assign in return the VLAN70.

  After that, the operating system recognizes the network successfully and starts working as expected...

  All of my virtual machines use VMXNET3 adapter and my version of vCenter is v5.5 build #2646482

  No idea what might happen?

  Concerning

  We found the problem...

  It was not associated with VMware, but a network configuration problem: (ESXi connected to two switches, one of them with the VLAN configured correctly and the other does not...).

  Thanks for the help

• How can I disable the Mappoint 2006 for the installation and the reactivation on new computer

  How can I disable the MapPoint 2006 for the installation and the reactivation on new computer

  This forum is for posting comments on the web site of Microsoft Answers, only not to ask questions of Mappoint.

  Mappoint forum is here: http://social.microsoft.com/Forums/en-US/streetsandtrips/threads

• Need help with the IP configuration on vm ware for the installation of 11 GR 2 on linux vmware 6 on win7

  Need help with the ip configuration on/etc/hosts for the installation of 11 GR 2 on linux vmware 6 on win7.

  Let me know if you need more info... in fact I have a setting error while installation said

  -(/ etc/hosts has no correct entry for the host name)

  Host: 192.168.85.100

  Win7 ip: 192.168.1.x

  Thank you...

  (host computer)

  Win7 64 bit

  (vmware)

  Oracle Linux Server 6.3 version

  Release of Red Hat Enterprise Linux Server 6.3 (Santiago)

  Oracle Linux Server 6.3 version

  -(/ etc/hosts has no correct entry for the host name)

  Then post your/etc/hosts.

  Host: 192.168.85.100

  Win7 ip: 192.168.1.x

  Why 85? have you tried 192.168.1.100?

• vCo Configuration Plug-ins 'bad credential for the installation of plug-ins.

  I'm running a weird question when I get to the "Plug-ins" of the installation of the vCo part.

  See screenshot.

  

  I spent both are different between two administrator accounts and it keeps returning

  Bad credential for the installation of plugin | Unable connect user: [admin], unknown user

  Hello!

  Try it with domain\username or [email protected]...

  You can also return to the LDAP configuration, there is a "connection test" - tab in the main window.

  Joerg

• conflicts for the installation of two labview applications

  Hello

  I have two applications LabVIEW 8.6 and can make the executable, then the installation for each of these files in the Project Explorer.

  After that I installed the FIRST application and when I want to install a SECOND, during the installation process, it indicates a newer version is currently installed even though I select a different installation path. The button "Next" is disabled, as shown in the attached screenshot.

  On the other hand, if I install the SECOND application first and then install the FIRST application, even if the installation paths are different, it installs the first application successfully but removes the second request.

  I don't know how to install both applications, one after another, regardless of the order. I appreciate any help or comment.

  See you soon,.

  Ali

  Make sure that both versions have a different code level.

  (Builder installer... Version information... Code upgrade. Simply press "generate" to create a new one for the installation program that is not working)

  See also this help page

  (If both have the same upgrade code, windows thinks that they are the same program and keeps only the higher version)

  (This image comes from 2015, do not know if it has the same appearance in 8.6)

  

• After the installation of new original canon cartridge pg40 my canon printer cannot recognize ink

  After the installation of new original canon pg40 cartridge my printer canon may not recognisd ink

  Hi Jeet,

  1. What is the model number of your printer?

  2. you receive messages or error codes?

  You can check the following link and try to run the fixit and check.

  Diagnose and automatically fix problems printing and printer

  Alternatively, you can contact Canon for help.

  Support for Canon

• How XP reacts to the installation of new equipment?

  How XP reacts to the installation of new equipment?

  If the hardware comes with a driver and it's plug - and - play. then install driver first and then plug unit in.  If the device under says that the driver is included in Windows, it connect while your PC is off, start the PC and let Windows detect it.  It should install the correct driver and the device configuration.

• Win 7 does not recognize the file type for the installation of the theme.

  Original title: download and install desktop theme

  I would like to install the panoramic snow theme but shows like PanoramicSnow.deskthemepack file extension. Win7 does not recognize the file type for the installation due to the addition of the "office" in the extension.  would it be possible to have that corrected please?  Thank you!

  Hello PMacCk,

   
  Thanks for posting your query in Microsoft Community Forum.
   
  Basically, the .deskthemepack extension is not recognized by Windows 7 because it is introduced in Windows 8. The new "panoramic" desktop themes all use this format.
   
  For reference, please see:
  1. http://windows.microsoft.com/en-gb/windows/snow-panoramic-download-theme
   
  2. http://blogs.msdn.com/b/robmar/archive/2013/11/26/snow-panoramic-theme-for-windows-8-and-windows-8-1-now-available.aspx
   
  There are still regularly .themepack themes available and those who continue to work in Windows 7 and Windows 8. Please visit the following link to download and install the themes:
  Themes
  http://Windows.Microsoft.com/en-GB/Windows/themes
   
  Hope this information is useful.

• While turning on the laptop its gives me a message "your pc will restart in two days for the installation of updates.

  About a week ago I just bought windows mobile 8 is installed. Now for the last two days while turning on the laptop its gives me a message "your pc will restart in two days for the installation of updates.

  To stop, I get three option 1) sleep 2) arrested update 3) and close

  What should I do?

  Original title: windows update issue 8.

  Hi Parichay,

  The updates that are being invited to install are automatic updates.

  The message you get is offered by Windows 8 after that updates are downloaded and installed.

  If you do not restart your computer soon, Windows will force a restart of your computer two days after that it has installed new updates to complete their installation.

  You must restart your computer at a convenient time for you, rather than wait two days and have it suddenly reboot maybe at an inopportune time.

  Hope that solves your problem.

• Difference between NAT vs vs Bridged, Host-only for the setting of my network card?

  When you use VMWare Fusion, what is the difference between NAT vs bridged vs Host-only for the setting of my network card?

  (Sort of related), if I use a VPN client on my guest will be Windows OS (as opposed to a my Mac OS host), who somehow reduce/limit the 'hooks' my company has also in my host operating system?  If so, I'm guessing that it then also prevents the limits / me being able to interact with my business from my host operating system environment?

  Thank you very much.

  KB link doesn't seem to work right now, so here's a basic response:

  NAT - Windows receives an IP address of one of the background merging services

  Bridge - Windows Gets an IP address from the same place as your Mac does

  Host just - isolated virtual machine of the world except the Mac.  (useful in development and testing of the configurations)

  NAT - Windows puts on a different subnet from the Mac, so the virtual machine cannot speak for the same things the Mac can talk with on a Mac network.  It puts kind of router between the Mac and virtual machine

  'Sex' bridge - essentially the same as the Mac, so you can access network shares, etc.  Good for enterprise environments where the virtual machine needs to talk to a network resource shared (AD, SMB shares, printers, etc.)

  Host only - yet once, isolate the virtual machine of all but the Mac, so no Internet, no Intranet, but he can talk to the Mac itself.

  Hope that explains things =)

• How and where can I buy a CD for the installation of 3.6.6?

  I have dial-up Internet. After downloading 3.6.6 I can't open because of "file is corrupt". How and where can I buy a CD for the installation of 3.6.6?

  Operating system

  Microsoft Windows XP

  You can not. This problem may be caused by anti-virus software. Try to disable it while you install Firefox. Don't forget to reactivate!

• Can satellite L300-1BV - I ask Toshiba for the installation CD?

  Hello

  How could I go ask Toshiba for the installation CD? My laptop (L300-1BV) came with the pre-installed operating system, so I can ask them for the CD?
  But I don't know how I'd go to this topic.

  Any advice?

  Hello

  I think you mean the Toshiba recovery disc. Is this correct?

  If yes you can create yourself Toshiba recovery disc. So start the Toshiba recovery disc creator to create this diskette.
  This disc you create operating system preinstalled with all the drivers and tools of Toshiba. It s also called settings factory or let's say the same thing that you started the laptop time first.

  Normally, you get a recovery reminder message and I think that this information could be useful for you:
  + Important INFORMATION +.

  + your system is equipped with a hard drive recovery system. If you need repair.
  + your computer in the restaurant to original factory State, you can do it directly.
  + HDD (press F8 when you start your computer, choose "Repair your computer" +)
  + and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

  + Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
  + Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
  + Gets severely damaged.

• Thank you for the installation of genuine hp ink cartridges

  I just replaced 3 ink cartridges and I get this message to come several times per minute

  "Thanks for the installation of genuine hp ink cartridges."

  The two buttons that can be selected are "View rewards" or "no thanks."

  I tried pressing each button, but the message continues

  Hi AlD23 and thanks for getting back to me!

  Thank you for the info, I have a few steps, I recommend you:

  First, remove the printer ink cartridges and reset the power supply.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I would recommend then update the printers firmware:

  Get updates of the printer for HP Officejet Pro 8600

  Please hold me!

• When will install Server 2008 Windows OS. Error Msg 0 x coming 80070070: "do not have enough space for the installation..." Even if I have 20 GB of space? Pls solve this problem immediately.

  When will install Server 2008 Windows OS. Error Msg 0 x coming 80070070: "do not have enough space for the installation..." Even if I have 20 GB of space? Pls solve this problem immediately.

  Hey Shiva,

  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=windowsserver2008r2general

  Please do not hesitate to contact us if you have other questions related to Windows.