For the problem of Datacopy's business rules

Similar Questions

• Anyone know a fix for the problem of gel (Xoom)

  Hey everybody. Does anyone know a fix for the problem of gel in the Xoom? Once from time to time, it hangs for a few minutes, and then "goes back to work. It gets really annoying.

  Hey everybody. Does anyone know a fix for the problem of gel in the Xoom? Once from time to time, it hangs for a few minutes, and then "goes back to work. It gets really annoying.

  
  

  Greeting debuisson,

  Welcome to the Support Forums!

  Are you using the browser (Google) stock on a very regular or frequent basis? If Yes, brief gel is a known problem due to a memory leak in the stock browser that Google has not yet difficult (there are under all versions of Android OS to date). Basically, the continuous browser to consume your memory over time, based on the sites you visit and the length of time, it is active, which makes the system pause/freeze periodically. There are two ways to deal with this, either install a third-party browser (such as FireFox, Dolphin, Opera, Chrome, etc.) or if you really prefer the stock browser, restart your Xoom every two days (to clear/free memory and cache).

  Apart from the browser, a third party application of thugs can cause this as well (especially if there are conflicts). The rule of this point, try to use a surveillance (as SystemPanel) application to monitor what is active in memory when you encounter the gel. Close active applications one by one until your gel goes and then locate the updated versions.

  Please let me know what you find.

  -Doc

• Delete the business rule on the list of planning application business rules

  Hi all
  

  
  

  It is Hyperion planning 11.1.2.3 500, Classic application.

  
  The business removed from the calculation Manager rule is not available in the calculation Manager but still available in the list of planning application business rules.

  Any suggestion is appreciated to get it removed the application too.

  Note: EPMA, to deploy the application, but not safe for the classic.

  Kind regards

  Deker P.

  Are you sure you have deployed all the rules again Calc Manager planning then the rule is removed from the planning to remove from the Manager of Calc won't be enough.

  Support documents

  How to remove Calc of Hyperion Planning and Smart View rules after their removal in the calculation Manager? (Doc ID 1983285.1)

  How to remove redundant deployed rules of calculation Manager a Hyperion Planning application (Doc ID 1568355.1)

  How to completely remove the business rules created in the calculation Manager (Doc ID 825853.1)

  How to remove business rules that have been deleted or renamed in the calculation of Planning Manager. (Doc ID 1598010.1)

  See you soon

  John

• I found the solution for the problem of sound-acpi with Satellite P100-219

  Hello

  I found the solution for the problem of sound-acpi with Toshiba P100 (it works with P100-219 at least). I can provide the source modified and compiled table DSDT, but I would like to know if it is possible to get these changes in the next update of the BIOS?

  See you soon,.
  MIK

  Hi Mik

  As you know that it is not possible to find info on the next BIOS, especially if you want to have some information about the Linux operating system. Just wait and see if some forum users pointed out something on the subject.

• A fix will come out for the problems with the new OS update?

  A fix will come out for the problems... the beach ball twirling, which began with the new update for the OS?

  Writing an effective question of communities of Apple Support

• If win 2003 is upgraded for the 2008 edition, it will fix alingment compensate for the problem with the SAN disks?

  If win 2003 is upgraded for the 2008 edition, it will fix alingment compensate for the problem with the SAN disks?

  Hi elvirkaric,

  Your question in Windows Server 2008 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/threads

• I searched for a solution for the problem I was on Win 7 Pro Service Pack 1 in the links on an open Adobe Acrobat file will not open in my browser Firefox 33.0.2. The error I get is "Acrobat could not run the web browser.  Unknown error. (123).

  I want a solution for the problem I was on Win 7 Pro Service Pack 1 in the links on an open Adobe Acrobat Pro 10.1.12 file will not open in my browser Firefox 33.0.2. The error I get is "Acrobat could not run the web browser.  Unknown error. (123).

  You can try a repair of your Acrobat installation. Maybe, at least it's a start toward a solution.

• Using the values of the A-T-D in Business Rules

  Hi all
  
  I use Hyperion Planning 11.1.1.1.0.
  I activated series dynamic time A-T-D in the application.
  
  I need calculate the % of variance for a YEAR, the formula to use is:
  
  (A-T-J (Oct) Budget - Y-T-D (Oct) real) / A-T-D Budget (Oct) * 100.
  
  I have a business (created in environmental assessments) rule makes the difference to other calculations % who are quite simple as Budget actual/Budget * 100.
  
  The formuls for normal variance percentage works, but I get an error when you write a formula for:
  
  "% Of variance (YTDActual & YTDBudget).
  ('% Of the variance (YTDActual & YTDBudget) '=' Y-T-D(&CurrentMonth)'-> Budget - "Y-T-D(&CurrentMonth)'-> actual / 'Y-T-D(&CurrentMonth)'-> Budget * 100 ;))
  
  
  The error that appears is the following:
  
  Details: cannot calculate. Error (1200497) analytical server: compilation error formula [% of Variance (YTDActual & YTDBudget)] (line 2): name of the unknown member function [operator @X] ['Y-T-D(&CurrentMonth)"]
  
  
  Can someone please advice such as using Y-T-D values in formulas?
  
  Kind regards.
  
  Mirka

  Here are some tips that can help:

  (1) you cannot directly reference Dynamics-Series extended members in good standing of business or a member formula. This is "virtual" members It is a common misconception.
  (2) even if you can reference these members in a formula, you could not store a value in them anyway, because they are dynamic.
  (3) he does usually not much sense to calculate the differences like these in a business rule. I would recommend making the formulas of dynamic members, re-encoding (not business rules) in the dimension of your scenario. They do not need to be "Two pass" in the strict sense (eg. recalculate a ratio for housing), but they need to shoot well, so set them as two passes. (otherwise you will end up with the order of calculation questions where you get incorrect results and other calculations fire after the variance).

  Looking at your condition, you don't really need a variance that calls members dynamic time series. Simply create a scenario of variance with a formula such as @VARPER ("Budget", "Actual");. If you have "Y-T-D (Oct)", chosen as your period of time in your form or datasheet calculation and 'Bud vs law %' (this is your new scenario of variance) selected, it calculates the variance of the CDA for October, or no matter what time you have selected.

  Just a reminder:

  (1) create a new scenario, called "Bud against law %". Make dynamic and re-encoding. Give him a formula of @VARPER ("Budget", "Actual");
  (2) scrap your business rule. Add other scenarios of variance if necessary.
  (3) add your CDA member and your scenario of variance to a form and test.

  Hope this helps,
  -Jake

• Partial cure for the problem of model Icon Editor

  I'm driven crazy by models Icon Editor behavior (which I love and use all the time).  What happens is I'll open a project, start to make icons with my set of templates (all saved in LabVIEW Data\Icon Templates\VI\BS icons) and especially if I've included copies of screws that have been developed, say, two years ago and copied from another file on the disk, will notice two copies of the model , with the second copy often in... part \VI\3rd.  Now, these are clearly my models, just saved in the "wrong" place.

  Get rid of these models in doubles was very difficult - I just spent half an hour doing it.  You delete all the files in the 3rd part, open the icon editor and see only one copy, then start doing things and Bingo!, the model appears in the model list in the Icon Editor, but also the file reappears in the 3rd party folder.  What should do?

  So I did a search on the Web, found a fool named "Bob Schor", which has asked about it in 2011 (on this Forum, of all places!), got a few suggestions, but does not solve the problem.  So I tried something else.

  I noticed that there is a lot of. BIN files stored in the model icon folders, with file names that appear to reference different versions of LabVIEW (e.g. Templates.15.0f2.bin).  On a lark, I deleted this file, deleted the folder of 3rd party model, LabVIEW has reopened, reopened the icon editor, and (he said, I hope) the problem seems to be solved.  There is no more 3rd-party file appearing in the model list, icons are not really, it can't be, maybe if I killed the evil Dragon.  I'll let it rest for a week and if it still seems to work, will return and mark this as a 'Solution '.  Comments and other ideas welcome.

  Bob Schor

  Is there a step I missed, but just found.  In the icon editor itself, there is a setting to know where (by default) record the models he finds inside a VI already, but are not in the calibre of icon file.  This setting is under Tools, icon editor properties.  In the 'Model' category, you should disable "Save third icon templates" which, like a default value of \Icon Templates\3rd, part.

  I am currently testing (on several machines, all configured slightly differently), these ideas and so far it seems to work.  I had a small panic today when the '3rd party folder' with additional copies of some of my models began to appear that I opened the existing screws, but turning the switch "Record the icon of third-party models" seemed to solve this problem.  I'm almost ready to mark this (and earlier versions) post as a Solution...

  Bob Schor

• Updates for the 2007 Microsoft Office Suite (business)

  My updates of Windows there are two available, when important updates downloaded and installed, Windows Update tells some updates have not been installed.  Failed: 2 updates.  Code 80070641 Windows Update encountered an unknown error.  The Microsoft® 2007 Office Suite Service Pack 2 (SP2)

  Download size: 207.4 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  Service Pack 2 provides the latest updates to the 2007 Microsoft Office Suite.  This update applies to Microsoft Office Project, Microsoft Office SharePoint Designer, Microsoft Expression Web, Microsoft Office Visio and Visual Web Developer.

  More information:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=B444BF18-79EA-46C6-8A81-9DB49B4AB6E5&displaylang=en

  Help and Support:
  http://support.Microsoft.com/?ln=en-us

  and:

  Update for the junk e-mail in Outlook 2007 (KB968503) filter

  Download size: 3.3 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  This update provides the filter of junk e-mail in Microsoft Office Outlook 2007 a more current definition of which e-mail messages should be considered junk e-mail.

  More information:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=04C02D0A-B1AE-4097-9643-81968081DD9C&displaylang=en

  Help and Support:
  http://support.Microsoft.com/?ln=en-us

  Now, I've exhausted my options here, can someone please inform me as to how I can solve this problem?  I respectfully request for a known solution, not what you think will solve the problem.  My OS is Vista Home Basic 32-bit.

  Thanks in advance to anyone who can solve this problem.

  Hi sallampat,

  Thanks for posting the Answers.Microsoft.Com Community Forum.

  I suggest start in a cleanboot, then try again your updates.  Download updates to a folder on your desktop, then start in a clean boot, then try the updates.

  We will follow the following steps

  1. start the CheckSur tool by - http://support.microsoft.com/kb/947821

  2. download the updates you referenced from this site: http://www.microsoft.com/downloads/details.aspx?familyid=04C02D0A-B1AE-4097-9643-81968081DD9C&displaylang=en and http://support.microsoft.com/kb/953195 download them and put them in a folder that you create on the desktop of your system.

  3. start your system by using the cleanboot procedure described below;

  To perform a clean boot on a computer that is running Windows Vista, follow these steps.

  1. Click Start
     type msconfig in the Search box and press ENTER.

     If you are prompted for an administrator password or a confirmation, type the password, or click continue.

  2. On the general tab, click Selective startup.
  3. Under Selective startup, clear the Load Startup items check box.
  4. Click the Services tab, select the hide all Microsoft Services check box, and then click disable all.
  5. Click OK.
  6. When you are prompted, click restart.
  7. After the computer starts, start the program or game and see if the problem is resolved.

  (Here is the article from the base of the boot process minimum - http://support.microsoft.com/kb/331796 - after troubleshooting is completed, use the steps listed in the knowledge base article to restore your system back to the normal mode).

  4. when your system is loaded into a clean boot - run an update at the same time in the folder that you downloaded on.

  After completing updates or to work on the updates that your system to a normal operating state, following the process of clean boot above, but turn on where to disable services were selected previously.  (The KB describes the entire process.)

  Please keep us informed on this issue if more information is required.

  Kind regards

  Debbie
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Get a message saying "for the administrator only' on Vista business.

  Original title: can I remove restrictions in professional Vista telling me that I am not Administator?

  Professional VISTA has been installed on the PC, even if I don't need "for adninistrator only' - limitation is disturbing. Only, I use this PC. I am the administrator. Is - it possible to do this program behave like VISTA home? Is there another solution to this problem?

  Hi Rainer Urbach,.

   
  (1) the connection accounts how many are there in the system?
  (2) what exactly are you trying to do?
  (3) remember you to make changes to the computer before the question?
   
  See the steps mentioned below and check if that helps.
   
  You can try setting the default Administrator account and check if you can solve the problem.
  a. click the Start button
   
  (b) in the Start Menu, click all programs Accessories followed
   
  (c) in the menu accessories, right click on the option from the command line .
   
  d. in the drop-down menu that appears, click on the "Run as Administrator" option
   
  e. If you have the User Account Control (UAC) enabled, you will be asked for permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.
   
  f. in the command prompt window, type the command net user administrator / Active: Yes and press ENTER.
   
  g. close the elevated command prompt.
   
  h. log (in the Start Menu) and you will see your new administrator integrated next to your current account.
   
  i. click the photo icon display built-in Administrator account and connect to it.
   
  If the problem is resolved, then try to disable the default Administrator account following the order and create a new administrator account.
  NET user administrator / active: No.
   
  You can try to create a new administrator account by following the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile   
   
  Hope this information is useful.

• I found the FIX for the problem of HP4500 ink cartridge!

  I had problems with my ink cartridge three colors... just like many others. After searching endlessly with no solution to the problem, I decided to take a flashlight and look inside the printer. What I found was a piece that had become crooked behind my color cartridge. It was a simple solution... I took a long thin to flat head screwdriver and pushed very GENTLY in place. I then ran a TEST PAGE and ALIGNMENT before I printed anything... it worked! Here is a picture I took before I did the setting of the insert on the left hand side, it's here that the color cartridge is going... If you notice, it appears to be crooked... he slipped easily right now in place. I've reintroduced the cartridges and closed the door. IMPORTANT * make sure that you unplug your printer before attempting to solve this problem * good luck and hope it's a permanent and not temporary solution

  Hi coolinutah,

  Thanks for the valuable information and goot to know that you were able to correct and solve the problem.

• FIX for the problems of HP4500 ink cartridge!

  I had problems with my ink cartridge three colors... just like many others. After searching endlessly with no solution to the problem, I decided to take a flashlight and look inside the printer. What I found was a piece that had become crooked behind my color cartridge. It was a simple solution... I took a long thin to flat head screwdriver and pushed very GENTLY in place. I then ran a TEST PAGE and ALIGNMENT before I printed anything... it worked! Here is a picture I took before I did the setting of the insert on the left hand side, it's here that the color cartridge is going... If you notice, it appears to be crooked... he slipped easily right now in place. I've reintroduced the cartridges and closed the door. IMPORTANT * make sure that you unplug your printer before attempting to solve this problem * good luck and hope it's a permanent and not temporary solution

  Hi coolinutah

  Thanks for the detailed post and photo

  

  Ciara

• I need help for the problem event name: BlueScreen. Help, please...

  Problem event name: BlueScreen
  OS version: 6.1.7600.2.0.0.768.2
  Locale ID: 1033

  More information about the problem:
  BCCode: 116
  BCP1: FFFFFA8007D53010
  BCP2: FFFFF88006CEAC48
  BCP3: 0000000000000000
  BCP4: 0000000000000002
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 768_1

  Hi Vikram,

   

  Thanks for posting the question in the Microsoft Community!

  You get the blue screen error in the computer.

  To work with the issue, I suggest you to visit:

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-in/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.

  Note: When checking a disk for errors, if bad sectors si des secteurs defectueux sont are found then the system tries to repair sector. All data may be lost. So make a backup of the data.

  Note: When you format a disk, all data will be lost.

   

  It would be useful for us to identify the problem, if you could upload the dump file.

  You can use the Sky-drive to download the dump file. Check the link for the steps on how to download Sky-Drive.

  http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65.

  The location of the dump file is C:\Windows\Minidump\.

• How do you re - print the invoice for the annual subscription to Adobe Business Catalyst?

  I'm trying to reprint the invoice for my annual subscription to Adobe Business Catalyst but can't find how to do, I need it for my accountant.

  Thank you

  Larry

  Hi Larry,

  Have you checked what docs? check the second top issue

  Accounts of the FAQ questions