Similar Questions

• When you try to add a network route with the "route add" command in the command line, I get the message "the requested operation requires a rise."

  Elevation required to route add command

  When you try to add a network route with the "route add" command in the command line, I get the message "the requested operation requires a rise."  What is the correct syntax to use?

  You can watch using the PowerShell...

  http://TechNet.Microsoft.com/en-us/library/bb978526.aspx

  http://TechNet.Microsoft.com/en-us/scriptcenter/dd742419.aspx

  .. .and post questions about Windows PowerShell forum...

  http://social.technet.Microsoft.com/forums/en/winserverpowershell/threads

• I try to add a route using the route add command, the command response is "the requested operation requires a rise."

  I'm traying to add a route using the route add command, the command response is "the requested operation requires a rise."

  Command: route add 10.1.1.0 mask 192.168.31.3 192.168.31.33

  Whay can I do, because I had tried in many cases

  original title: route command

  In response to a previous and similar thread...

  You can watch using the PowerShell...

  http://TechNet.Microsoft.com/en-us/library/bb978526.aspx

  http://TechNet.Microsoft.com/en-us/scriptcenter/dd742419.aspx

  .. .and post this question on the forum of Windows PowerShell...

  http://social.technet.Microsoft.com/forums/en/winserverpowershell/threads

• END point URL for the routing service BSE says not FOUND

  Hi all

  For services of routing in BSE, the WSDL link opens the fine, but the link to endpoint URI for the routing service fails with the message below the message. When I invoke the WSDL with SOAP UI, I'll be back the same error message. I tried to bounce the server, but no help. I also noticed that this slide ESB_Projects Directory gives error 404 on any browser.

  Then, when I click below url for all the routing service

  http:// < hostname >: < port > /Event/ < systemName > / < serviceGroupName > /AddressStandardizeRS

  I get the error in the browser - below

  Not found

  The URL /event/ requested < the system name > / < group name > / < Routing Service name > was not found on this server.

  Oracle-Application-Server-10g/10.1.3.1.0 Oracle-HTTP-Server Server at odevsoa.local1.wbcgp.com Port 7777

• Satellite L350 - access code for the router

  Dear Sirs

  I have a Toshiba Satellite L350 under Windows 7 Ultimate. For the first 5 months, he remembered the wireless to the router access code. I then installed a BT Home Hub which I subsequently removed and then the Windows 7 machine will remember is no longer the password.

  I spent hours on the phone with Microsoft without success. Can anyone help?

  Hi Peter Kellard,.

  For the moment I put t understand your problem.

  What happens if you enter the WLAN (access code) key again? Can you connect?
  You could save it again ;)

• Den inst and Mettler balance does not not for the Visa print command

  Hello, I am working at the interface a S-8001 Instrument in Denver and an analytical balances Mettler Toledo PB5001 in the same .vi. Using the subvi VISA I can get two scales to account for their mass in the .vi, but only if I send them constantly of the data (i.e., baud and comm port, etc. are configured correctly). My problem is that ongoing surveys are both unnecessary and are prone to error and the .vi are save only a part (or a zero) in any event given sample. I can confirm in addition to using hyperterminal print control correct for the Denver Instrument balance is "esc + P", and I think that the command of Mettler is a variant of '' IF. '' However, enter either of these commands (and other variations) in the terminal 'chain to write' the visa write .vi does not appear to send the necessary information to the balance to deal with the measure. I spoke with support technique both Metter and DI and after spending time with each other that they were unable to solve the problem... but suggested that perhaps the wonderful world OR maybe get an idea. Forward to your response. Thank you!

  How do you send the esc character? You can just type esc. Hex 1B then you could do a right-click on the control of the chain and select "hexadecimal display. There are other such features a cast and table byte in string that are useful when doing non-ASCII.

• Where can I find the hexadecimal encryption for the router?

  original title: WIRELESS IS ASKING for HEX ENCRYPTION WHERE I would NORMALLY PUT the PASSWORD

  My toshiba satellite pro 4600 when I entered the password, he said I was connected but didn't have no internet.  the signal strength is good... and the rest of my computers work properly.  I wonder if the encryption for the new router I'm not in the HEX code like I did in 'time' once, I entered a real password.  is there a screen somewhere in the router configuration that shows the translation of the password for the real hex/bit encryption?

  Thank you

  It is useless to ask technical questions in the forum Feedback so I moved your message on the forum 'Making in network and get online' Windows.  However, you neglected to mention your version of Windows.  Please provide that.

  Your router provided with documentation that describes the values by factory default, including encryption.  Most routers have no active encryption when fresh from the factory.

• How can I find the key to network security for the router?

  original title: network for an old Netgear WGR614 Wireless-G router security key

  I want to use an old Netgear WGR614 Wireless-G router that I used on a desktop about 3 years ago. My Dell Inspiron has the router successfully concluded, but how do I know what is the key to network security?

  Hello

  The security key is defined in the router and can be changed by resetting the router. Check
  with NetGear Support and their online documentation and assistance which should have the
  Full methods appear and are not difficult. NetGear forums are also an excellent
  source of help. Update the firmware, so availalble, would also be a good idea on an old
  router.

  NetGear
  http://www.NETGEAR.com/

  NetGear - Support & community<-- there="" are="" several="" versions="" of="" the="" wgr614="">
  Enter your full model number here.
  http://support.NETGEAR.com/app/

  NetGear - Forums
  http://forum1.NETGEAR.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How to set a password for the router in mn 700?

  I have a MN-700 router and want to set a password so that other people can not access my connection. Can u please provide an astep step-by-step, instructions how to do it. Thank you.

  This is not a forum for the MN-700 router. You have to go to the manufacturer's Web site and look for the instructions or ask their support desk.

• I'm looking for a list of commands/syntax for number formatting. Example of ^ 1, ^ #, ^ t, etc...

  I'm trying to find a list of command/syntax that can be used in number formatting (bullets and numbering - style - dial number field).  I found a few examples, but I keep a list of available commands.  I searched, but was unable to find it.  Presumably, I'm using the wrong search terms.

  I don't think, because these are only a few. In the automatic numbering of the paragraph style settings dialog box, you have a drop down menu where you can select the formats that are then entered in the form of these shortcuts.

  

• How to install the firmware for the router LinkSys E900 update?

  Hello

  I use Mac 10.7.5 and a few months back had bought E900 wireless router.  He has installed 1.0.03 firmware and I noticed there is a 1.0.04)is update.  I downloaded the update, which is a sync .bin file, but I don't have a CD burner, or access to a Windows machine.  How can I install the update of the firmware?

  Thanks,-Dave

  Just, simple, with your wired computer (never wireless) access the GUI of the router and perform the update of the firmware.  Just point to the .bin file and you leave.  Make sure you reset the router and reconfigure it once you're done hard.

• That must make the password stored in the JAGENT portfolio, and what JAVA_HOME should I use for the pw_agent_util.sh command?

  I configure the GoldenGate Plugin for OEM. There is a step to create the portfolio. The documentation is not clear on the role of the provided password. If I run the JAGENT as user oracle, it must match the password for the oracle user, or is this separate password? Also, should I use the jdk to OEM agent to set JAVA_HOME?

  ./pw_agent_util.sh - jagentonly

  Pat,

  Morning.  Good to see that someone is working on the use of the plug-in for GoldenGate in OEM12c.

  If you use the plugin 12.1.0.2, you will be much better with the preparation of reports on the processes of GoldenGate.  In order to get the 12.1.0.2 plugin to work, the 12.1.3.0 JAgent is necessary and can be downloaded in the distribution of the Oracle GoldenGate monitor (Agent Monitor configuration Oracle #GoldenGate |) DBASolved).  If you use the old plug-in 12.1.0.1, the JAgent is integrated with the GoldenGate Software (Oracle GoldenGAte(11.2.1.0.1 and later) and Oracle Enterprise Manager 12 c |) DBASolved).  I recommend you take the new plug-in!

  Now to the address that ask you the password. The password is stored in the portfolio under the House of GoldenGate ($OGG_HOME/dirwlt) and is used directly for the JAgent to connect to the EMAgent and connect with OEM.  The password associated with user name is configured in the $JAGENT_HOME (different depending on version, look for the Config.properties).  Then in OEM, the user name defined in the Config.properties and the password in the portfolio must be provided before OEM GoldenGate targets will come.

  The $JAVA_HOME parameter is dependent on the version of JAgent you want to run.  The JAgent 12.1.3.0 to using the JDK 1.7 or higher.  The JAgent shipped using JDK 1.6.

  Thank you

  Bobby

• How to access a custom property for the attribute and command in .vm file?

  Hello
  
  I have created custom in OPM for attribute properties and also apply only to assign properties.
  
  But if this value in the .vm file access?
  
  I've accessed the help
  
  $attribute.getProperty ("ScreenProp", "default")
  
  but it is not functional but is even worked for the custom property screen

  It already is the answer in my first answer in the thread How to access custom in the .vm file properties :

  $control.getProperties () .get ("PropertyName")

• Try adding conditions to clause "and" stored in the table for the where clause, unknown syntax

  I am trying to add additional segments to the 'where' clause, and I don't know exactly how to proceed. I am currently using another table to search for keywords and sometimes there aren't everything. I use this table containing the key words to search the description and associate a symbol with a path.

  The code loops through the keywords with the keywords most associated and try to find links to a symbol then excludes those and search for symbols that correspond to those with less keywords and all. I am able to do this with 6 queries and manually changing the arguments, but I want to loop together so that if the changes need to be made in the future, I won't need to go digging in the code.

  Thanks, but that's ok. I already have a solution for this.

• RM-30410: WARNING: property single record ignored for the non-bloc command

  Hi gurus,
  
  I have a block, as oracle default behavious is that when any user between record and during that if he or she touches down arrow then he gets to the next record, I want to prevent this behavior.
  In other words, I want that user doesn't have to enter second disc and if he or she need enter then record after first saving and then user can do it if it navigate to your second time.
  
  In the property palette, I put Yes for single record but when I compile the form is for me after warning
  

  FRM-30410: WARNING: property single record ignored for non-employees control block
  Created the form file C:\my_forms\employees.fmx

  please seek help that how can I sort.
  
  Thank you
  Hina

  If he or she touches down arrow then it comes to the next record of new, I want to prevent this behavior.

  Pressing key or button-nxtrec block trigger change

  begin
    null;
  end;
  

  (or give the user a message "Unauthorized key" here).