For the WLC domain user authentication

Similar Questions

• Upgrade for the WLC code questions

  We 6.0.132 (lastest) WCS and our controllers are on 4.2.130, we now to upgrade to deal with sometimes, but don't want to capwap yet.

  Question 1: what is the last exit LWAPP code?

  Question2:Whats the differences between 4.2.207 (support page for cisco said it's the latest version), but it has same releases with ie 6.0 how it works it is very confusing workout a way to upgrade to higher versions

  See you soon

  Hi Tyrone,

  I'm not an expert on the management of versions, but here are some basic in response details

  at your request

  4.2.207 is the last version on the Train of 4.2 and is without doubt an excellent choice

  If you are avoiding CAPWAP for now. You will see in the link below which

  There are several 'simultaneous' for the WLC Trains (and most of the Cisco product). People

  were not big fans of the first Trains 5.x (quite buggy) and was introduced to CAPWAP

  in 5.2 and the attacker thus is why 4.2.207 seems to be a good choice for you

  In the later version or 5.2 controller software version, Cisco lightweight access points use the IETF control and commissioning of Access Points (CAPWAP) standard protocol to communicate between the controller wireless and other points of light access on the network. Versions software controller before 5.2 use the Lightweight of Point access (LWAPP) Protocol to these communications.

  CAPWAP, which is based on LWAPP, is a standard and interoperable protocol that allows a controller manage a collection of wireless access points. CAPWAP is implemented in version 5.2 software controller for these reasons:

  *

  To provide a path for upgrade of Cisco products that use LWAPP generation Cisco products that use CAPWAP
  *

  To manage RFID readers and similar devices
  *

  To allow controllers to interoperate with third party access points in the future

  LWAPP compatible access points can discover and join a CAPWAP controller, and conversion to a controller of CAPWAP is transparent. For example, the process of discovery of controller and firmware download process when using CAPWAP are the same as when you are using LWAPP. The only exception is for layer 2 deployments, which are not supported by CAPWAP.

  You can deploy CAPWAP and LWAPP controllers on the same network. The CAPWAP compatible software allows access points join to be a controller running CAPWAP-LWAPP. The only exception is the Access Point Cisco Aironet 1140 series, which takes in charge only CAPWAP and joined so only controllers that run CAPWAP. For example, 1130 series access point can reach a controller running CAPWAP or LWAPP considering that access of series 1140 point can join only a controller running CAPWAP.

  http://www.Cisco.com/en/us/products/ps6366/products_qanda_item09186a008064a991.shtml

  4.2.207 was released on July 24, 2009 which makes the new second version available on any train.

  http://www.Cisco.com/en/us/products/ps6366/prod_release_notes_list.html

  See you soon!

  Rob

• Principal name for Active Directory "domain users".

  Hello
  
  I integrated successufully Weblogic & Active Directory Kerberos (SINGLE sign-on). I tested a web application and successifully logined with authentication.
  The system automatically recognizes my Active Directory user name. It worked.
  
  For authentication in my weblogic.xml I used
  
  < security-role-assignment >
  Admin > role name < < / role name >
  Kursat < SPN > < / main-name >
  < SPN > Fenerbahçe < / main-name >
  < / security role assignment >
  
  Now I am trying to allow all domain members authenticate my request. For my application, I need only the usernames of the directory an actress for them.
  
  To do this, I removed "Chris", "fenerbahce" of my weblogic.xml
  Kursat < SPN > < / main-name >
  < SPN > Fenerbahçe < / main-name >
  
  I added
  users in domain < SPN > - < / main-name >
  rather than write all users in the domain.
  
  However, I could not authenticate. I got the "Error 403 - Forbidden".
  
  Y does it can someone help me?

  test by creating a domain users groups and use it as your primary name in your weblogic.xml

  -Faisal
  http://www.WebLogic-wonders.com

• I want to download the User Guide for the Apple TV user guide.  How can I do?

  I would like to download the User Guide for the generation of Apple TV User Guide 4.  Impossible to do on the Apple official site.  East - intentional; and if so, is there another way to download this User Guide?

  Hi you have this internet guide http://help.apple.com/appletv/

• How can I redirect the page to the URL of another whenever I hit the Cancel button for the site of windows authentication in sharepoint.. ?

  I'm trying to redirect the error page 401 for the SharePoint site to windows authentication?

  Hello

  I suggest you to report the problem in this forum:

  http://social.technet.Microsoft.com/forums/EU/sharepoint2010setup

  It will be useful.

• For the Hyperion System user details

  Hello world

  I use Hyperion version 11.1.2.1

  Is it possible to list all users and their details who looked at Planning, Essbase and HFM Applications over the past 3 months.

  -Sun

  Try this...

  for hfm

  Select g.servername, g.appname, to_char ((to_date (' 01/1900 "," MM/YYYY ') + g.starttime - 2), ' DD/MM/YYYY hh24:mi:ss'),

  TO_CHAR ((to_date (' 01/1900 "," MM/YYYY ') + g.endtime - 2), hh24:mi:ss'), g.strdescription, s.susername a/MM/YYYY

  of AppName_task_audit g, s hsv_activity_users

  where to_char((to_date('01/1900','MM/YYYY')+g.starttime-2),'MM/YYYY') > to_char (add_months (sysdate -3), "MM/YYYY") and

  TO_CHAR((TO_DATE('01/1900','MM/YYYY')+g.StartTime-2),'YYYY') = to_char (sysdate, 'YYYY') [optional:-1, -2, -3]
  

  You can change parameters based on your records to 3 months of age (sysdate-3) gives duty from the current date, and if you want to find records for the last year, then you can make the request at the end as to_char(systdate,'YYYY')-1...

  haven't tried for Essbase SSAudit will try and let you know incase if I can make it more convenient and easier to analyze.

  Thank you

  Amith

• Same resource get assigned several times for the same account user IDM

  Hello
  I now see a strange scenario in IDM. We have a DB TAG and a scheduled task. When I ran the scheduled task, then it assigns the purpose of resource GTC to the respective accounts in IDM. When I run again the GTC, the same object resource GTC is created once more for the user account. Means, now the user account has two resources GTC in the profile of its resources. It should have been only object resource GTC and update should have been linked to this GTC RO. Purpose in my about his creation of another object of the resource.
  Now, I ran five times GTC and my user now has 5 resource. Please let me Kow what harm I do.
  
  
  Thank you
  Kalpana.

  Make sure that this key field is mapped correctly in your recon field mappings. Also, check the areas of the reconciliation of the resource of the GTC.

• Revoke the option for the roles of users admin

  Hi all
  
  OS: SunOS
  DB: 10.2.0.3
  
  Hello
  
  
  How to revoke the privilege of admin for the roles of specific uses;
  
  Ex:
  
  I want to revoke admin option for roles connect, new_connect nmos_user from users.
  
  It allows:
  
  DEALER GRANTED_ROLE SMA DEF
  ------------------------------ ------------------------------ --- ---
  ABC abc_role Yes Yes
  
  Published by: [email protected] on March 13, 2010 05:03

  See: http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_9013.htm#SQLRF01603

  "To revoke the ADMIN OPTION on a privilege system or a user role, you must revoke the privilege or the role of the user in total and then grant the privilege or role to the user without the ADMIN OPTION."

• Satellite A100-02 b PSAAR: trick to be able to save for the multi monitor users

  Hi, people

  I always use an external as extension of office monitor when I connect my Tosh to AC.
  And I just found out, when I plug it all and go truly mobile, the graphics card still provides a signal to the VGA Port for the then nonexistent extern monitor.

  On my Satellite A100-02 b (PSAAR) that consumes about 2 Watts, which means about 10% of the duration of battery life, which is about 20 minutes!
  So, if everyone did the same thing
  -Place a link on your desktop or startmenu to 'C:\Windows\System32\control.exe desk.cpl"to have quick access to the settings of the monitor
  -turn off the monitor 2
  - and enjoy longer battery life!

  It's on my Vista, I don't know how XP performs...
  Welcome, Matz

  Hello

  Thanks for the very useful info.
  I think it could be very useful for everyone who uses batteries very often.

  Good bye

• How to set the zoom to 125% for the partially sighted users

  On I.E. I can set the zoom to 125% on the computer so that all I see on my screen is enlarged as discount of 25% for low vision requirements. I can't find such a framework on Firefox.

  The Firefox Page Zoom feature makes a domain level by area to save favorite settings level users zoom, there is no default Page Zoom level setting in Firefox, as with some other browsers.

  Try the extension Default FullZoom Level and set a default zoom level:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/6965

  Or try the NoSquint extension:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/2592/

• The VPN client user authentication

  When users connect to our network remotely via VPN user name field is already filled with the last person who logged. I know that they just delete the username and enter their own, but is there a way the client can be configured to where the username field will be always empty for all those who want access to the network via VPN? We have an ASA 5510 with version 7.0 (8) and a windows 2003 with IAS server for windows authentication. Thank you!

  Hello

  In FCP, you can configure a single line is not editable by the user (or the vpn client).

  Simply insert an attack! Like this

  ! Username =

  ! SaveUserPassword = 0

  ! UserPassword =

  ! enc_UserPassword =

  Subsequently the vpn client will not save registrations for these settings more.

• Best practices for the management of user access in ESXi host without 'root '.

  What is the best way to make the management of the user access to the ESXi host after you disable the default root account. Is it better to create induvidual accounts

  Via vCenter or intergrate Active directory or any other specific way.  Please help me to clarify this point. Thanks in advance for your answers.

  With the release of ESXi 5.1 it is possible to create an account on the ESXi host and assign them Full Admin privileged but there are a lot of admins of loggin in each ESXi host and user account creation.

  I would like suggestions to add the ESXi to AD and add the authorization based on domain accounts.

• development tool for the blackberry application user interface

  Hello

  I have recently started the development of blackberry and I have good experience for other mobile platforms.

  For UI design, I couldn't find any tool. Is there a tool available to design the UI drag-and - drop controls. or I have to create all the item the user by writing code.

  Please, share your ideas with me.

  Thank you

  Aktaion.

  Hello

  Guidelines

• Problems with Smartphones blackBerry icon for the latest email users deleting

  Past users icon email still appeared to me, and I can't find out how to remove it, since this is not not active I can't get out of here any help for a newbie to bb?

  Go to Options -> Advanced Options -> service book and remove all the email ID of the previous user. You must remove the two [CICAL] and [CMIME] coming next to the identification of email you want to delete.

• Failed to open a session for the first time user. Already put in wifi before logon.

  Hello

  I have a problem on windows 7 wifi before logon. Am currently using windows 7 Enterprise, whenever I boot up to windows on the bottom screen there is a status wifi say "windows tries to connect wifi (my wifi profile).  While I am able to connect to my school network.

  When the new user try to connect it is able to identify and prepare the new Office BUT when 2nd user login or 3rd I'm having a problem. Windows will not be able to connect and it showed the error "'no connection servers available at the service ofthe logon" "

  Know any solution for that?

  Rgds,
  Dan

  Hi Dan,.

  Thanks for posting in the Microsoft Community.

  However, the question you posted would be better suited in the TechNet Forums; We recommend that you post your question in the TechNet Forums to get help:

  TechNet: http://social.technet.microsoft.com/Forums/en-US/smallbusinessserver/threads

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.