Force linked Clones to check the live servers to KMS for Activation

Similar Questions

• Messenger: The application has failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details. How to fix?

  My Messenger was working normally, then I shut down my computer at lunch. In return, I turned it the Messenger wasn't working and this appeared:

  "The application failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details"

  Can someone help me to fix it? Thank you.

  Hello

  they will help you with your questions/problems Messenger when repost you the link below in the Messenger forums

  http://windowslivehelp.com/product.aspx?ProductID=2

• Yahoo messinger does not start, he said: "the application failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details. » __

  Yahoo messinger does not start, he said: "the application failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details. »

  UM. I have no idea what that means, I never had that in my 20s I was using a computer.  Please help, someone!

  You can get the Chkdsk to run in the General Windows interface by following these instructions?

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking. Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive. If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  Your command prompt Mode works without failure or a boot?

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  It works if you test with another user, you will need to create one to test with?

  System Restore and the System File Checker is able to fix anything?

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (or 7)
  http://support.Microsoft.com/kb/936212/#appliesTo

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
  http://support.Microsoft.com/kb/928228#appliesTo

  Have you tested malware?  I see a lot of recommendations here for programs such as -

  Malwarebytes' Anti-Malware
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntispyware
  http://SUPERAntiSpyware.com/

• When I opened e-mails. doc or pdf, this message appears: "the application failed to start because its side-by-side configuration is incorect. Check the log of events applications for more details. »

  Original title: side-by-side configuration is incorrect

  When I opened, try opening some emails. doc or pdf, this msg appears: "the application failed to start because its side-by-side configuration is incorect. Check the log of events applications for more details. »

  I'm going to log events, but how to solve the problem by putting the RIGHT configuration to?

  Thanks in advance

  Hello

  1. when the question is is produced?

  2. you remember of any change to your computer before the problem?

  3. are you using a 32-bit operating system or a 64-bit?

  Please visit: What are the information in the event logs? (Event Viewer)

  In the meantime, follow these steps and check if they help.

  Step 1:

  I suggest you install the Visual C ++ 2005 Sp1 Runtime and check if the problem persists:

  Microsoft Visual C++ 2005 SP1 Redistributable Package (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=200b2fd9-AE1A-4a14-984d-389c36f85647&displaylang=en

  Step 2:

  If this does not resolve the issue, I would have you done SFC scan on your machine to check if the problem is related to missing or corrupted system files.
   
  Aziz Nadeem - Microsoft Support
  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Linked clone is not the deletion of the Horizon view administrator

  I am trying to remove a linked clone (and pool that linked clone). However, he advised that is the removal of more than 12 hours. I think that the problem is that someone has tried to connect to this virtual machine before fully completing commissioning. The only other VM in the pool view Horizon has deleted without argument. Is there another way to remove this virtual machine?

  See you soon

  

  Hello

  Please find the following article to remove orphan console machines manager view. It will be useful.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1013760

• Where can I find Firefox 7.0 to install? Is there a link maintained where all the firefox releases are available for users

  Hello team,

  Is there a link maintained where all the release of firefox and its patch are available for users to download & install

  You can get Firefox 7 here

  • http://releases.Mozilla.org/pub/mozilla.org/Firefox/releases/7.0.1/

  BUIT its recommended to use Firefox 8

• «the cpu fan works not.» Check the fan connections and call for service. »

  I was wondering if a failure of different from 'CPU fan has failed... system in a few seconds will stop. " I have an office of DX - 2000 P4 under XP SP3 that I just changed the motherboard and CPU fan on. All the fans are running at about the same speed. (P/S, chassis and CPU). Not very fast but cannot see the fins. Computer sat for several years. I was wondering what is the real test and how the fan speed is controlled. I suppose that temperature sensors built into the cpu, somehow, there must be a variable voltage applied to the fans to change their speed and/or a measuring device to see what is their RPM. This must be controlled by the BIOS as is any pass/fail test. My next step is to replace the old fan and see what happens. I have a new p/s to install should be here today. Actually used, but cleaned up and tested. Economy of cleanup. Not sure if my older diet could be the cause of the issue with low Volt.

  If the fan is slower than the factory fan, you will have this problem.

• Method to check the VISA resources is ready for writing.

  Dear Forum, I have a piece of equipment that I connect to LabView via serial. The companion of the Instrument is of course completely useless, which fails for inexplicable reasons, but everything works perfectly in hyperterminal.

  When I try to adapt the example "basic series write and Read.vi" at my request, the implementation is very simple. However, it does not work despite working in hyperterminal. After a bit of investigation, I have determined that the problem is that after "VISA set up Serial Port" port is not * actually * available for writing quite yet, most likely because it is a very old computer.

  By inserting a delay between the "VISA set up Serial Port" and the "VISA Write" I am able to get the program works as expected 100% of the time. However, it is a very bad solution, because this long delay can be totally useless and performance on the computer to an end user (which may be much better than this one). Especially because this piece of equipment has 8 analog inputs, 8 analog outputs, 4 relay, 20 outputs 24VDC, 8 DIOs and 3 ports RS232 passthrough so it communicates a lot of data.

  Is there a function I can use to * guarantee * that the COM port is really ready for writing? If I could do this, then it can return almost immediately on a fast computer, while leaving enough time for computers slower finish opening the port. It may well be something that happens on the side of the pilot of the command windows open port.

  It comes to LabView 8.20 running on a Windows XP in VirtualBox on Linux host. Please don't just tell me that I shouldn't use virtualized Windows, I am sure that this problem occurs for the disabled of old material as well as it is the only significant in terms of series API difference. The virtualized instance is only likely to be more slow material dealing with than it would be otherwise.

  You can get information on the creation of an Instrument Driver Networkdriver.

  If your instrument does not return an ID and you can not do a reset, then obviously your initialize function would not code for this. Having the code that defines the instrument on certain default configuration is common.

  I don't know how this driver is intended to be used. Do you want that he NOR certified. The driver needs to be distributed outside of your company? It seems that the problem with your com port is unique to your pc and the installation program. How many times this would appear to other users?

• Check the table in its entirety for collision? How? AS 2.0

  Hello!

  I make a flash game with Actionscript 2.0 and that you have encountered a problem.

  I have this _root.bulletArray = [] statement that stores all my clips that have been created with attachMovieClip. I was able to store all the balls in the table because when I say that it trace the table I get the following text:

  _level0.bulletCopy39
  _level0.bulletCopy39, _level0.bulletCopy43
  _level0.bulletCopy39, _level0.bulletCopy43, _level0.bulletCopy47
  _level0.bulletCopy39, _level0.bulletCopy43, _level0.bulletCopy47, _level0.bulletCopy51
  _level0.bulletCopy39, _level0.bulletCopy43, _level0.bulletCopy47, _level0.bulletCopy51, 0.bulletCopy55 _level
  _level0.bulletCopy39, _level0.bulletCopy43, _level0.bulletCopy47, _level0.bulletCopy51, 0.bulletCopy55, _level0.bulletCopy59 _level
  _level0.bulletCopy39, _level0.bulletCopy43, _level0.bulletCopy47, _level0.bulletCopy51, 0.bulletCopy55, _level0.bulletCopy59, _level0.bulletCopy63 _level

  and etc...

  But how to detecting the collision with ALL the balls?

  I have a movieclip that bears the name of the instance: enemy

  I wrote the following:

  If (_root.bulletArray.HitTest (_root. Enemy))

  {

  trace ("hit")

  }

  It dosent work, notihing is traced in the command thing.

  But if I do the following:

  if(_root.bulletArray[1].) HitTest (_root. Enemy))

  {

  trace ("hit")

  }

  then it will detect the collision, but only of this ball, not the range of the bullets.

  Any help is very appreciated! = D

  -NOTE-

  I also tried the followign without success:

  If (_root.bulletArray [1,2,3,4,5,6,7,8,9,10]. HitTest (_root. Enemy))

  {

  trace ("hit")

  }

  You must use a loop to go through the element of a table in its entirety at a time...

  for (i =; I

  If (_root.bulletArray [i]. HitTest (_root. Enemy))

  {

  trace ("hit")

  }

  }

• Check the box of a CASE for a Collection of Apex statement

  Attempt to use a case statement to determine the day of the week in the field of LINEITEM_DATE2, then
  Place the REG_HOURS in the new columns in the collection representing the days of the week.
  The case statement below (in bold) just doesn't. I even tried when a simple and hardcode
  a value. So is it possible that way?
  
  I / P looks like this___
  ATT_CODE REG_HOURS LINEITEM_DATE2
  P 4 JUNE 14, 10
  P 8 JUNE 16, 10
  P 2 JUNE 14, 10
  P2 8 15 JUNE 10
  
  Collection of the O/P should look like this___ (light version)
  ATT_CODE Monday Tuesday Wednesday
  6 8 P
  P2 8
  
  declare
  date of V_DATE;
  Monday varchar (4): = '0';
  
  Start
  
  If htmldb_collection.collection_exists ("TIMECOLLECTION") = FALSE
  then htmldb_collection.create_collection (p_collection_name = > 'TIMECOLLECTION');
  commit;
  on the other
  C1 in (select collection_name, seq_id)
  of htmldb_collections
  where collection_name = "TIMECOLLECTION")
  loop
  () htmldb_collection.delete_member
  p_collection_name = > c1.collection_name,
  p_seq = > c1.seq_id);
  commit;
  end loop;
  end if;
  -V_DATE: = to_date(:A_CURRENT_MONDAY_WEEK,'DD-MON-RR');
  V_DATE: = to_date (June 14, 10 ',' DD-MON-RR');
  
  for rec in (select
  ATT_CODE,
  REG_HOURS,
  LINEITEM_DATE2 as HOUR,
  CASE
  WHEN to_date (LINEITEM_DATE2, 'DD_MON_RR') = to_date (V_DATE, 'DD_MON_RR')
  THEN REG_HOURS
  ELSE ' 0'
  END like Monday
  of TRANSACTIONTIME
  where: A_BADGE = BADGE
  and LINEITEM_DATE2 > = V_DATE
  and LINEITEM_DATE2 < = V_DATE + 6)
  loop
  () htmldb_collection.add_member
  p_collection_name = > 'TIMECOLLECTION ',.
  p_c001 = >-1,
  p_c003 = > rec. HOUR,.
  p_c004 = > rec. ATT_CODE.
  p_c005 = > REC CC,.
  p_c006 = > rec. PC_ID.
  p_c007 = > rec.WO,
  p_c008 = > Monday.
  p_c009 = > V_DATE + 1,
  p_c010 = > V_DATE + 2,.
  p_c011 = > V_DATE + 3,
  p_c012 = > V_DATE + 4.
  p_c013 = > V_DATE + 5.
  p_c014 = > V_DATE + 6);
  end loop;
  
  END;

  Hello Shelly,

  V_DATE's date , it means that you needn't to_date:

  CASE
  /*WHEN to_date(LINEITEM_DATE2, 'DD_MON_RR') = to_date(t_date, 'DD_MON_RR')*/
  WHEN LINEITEM_DATE2 = t_date
  THEN REG_HOURS
  ELSE '0'
  END as monday
  

  I guess that LINEITEM_DATE2 is of type date .

  If you want to compare without time then

  CASE
  /*WHEN to_date(LINEITEM_DATE2, 'DD_MON_RR') = to_date(t_date, 'DD_MON_RR')*/
  WHEN trunc(LINEITEM_DATE2) = trunc(t_date)
  THEN REG_HOURS
  ELSE '0'
  END as monday
  

  I also think that:

   p_c008 => monday,
  

  Must be:

   p_c008 => rec.monday,
  

  Lev

  Published by: the on June 23, 2010 13:12

• Why firefox 32 64-bit does not check the/usr/lib64/mozilla/plugins for libflashplayer.so

  uname - a
  3.9.10 - 100.fc17.x86_64 Linux CBD
  Firefox version 33.0.2

  file firefox firefox-bin
  

  Firefox: ELF 64-bit LSB executable, x 86-64, version 1 (SYSV), bound dynamically (uses shared libs), for GNU/Linux 2.6.18, BuildID [sha1] is 0x8ffc335dd970a4ab7e726478afacb3df59cb6c21, stripped
  Firefox-bin: ELF 64-bit LSB executable, x 86-64, version 1 (SYSV), bound dynamically (uses shared libs), for GNU/Linux 2.6.18, BuildID [sha1] = 0x8ffc335dd970a4ab7e726478afacb3df59cb6c21, stripped
  Error message:
  LoadPlugin: failed to initialize shared library/usr/lib/flash-plugin /libflashplayer.so evil class ELF: ELFCLASS32

  From strace:
  lstat ("/usr/lib/mozilla/plugins/libflashplayer.so", {st_mode = S_IFLNK | 0777, st_size = 39,...}) = 0, etc..

  See:

  • http://KB.mozillazine.org/Determining_plugin_directory_on_Linux
  • https://developer.Mozilla.org/Add-ons/plugins/Gecko_Plugin_API_Reference/plug-in_Basics#How_Gecko_Finds_Plug-ins

• How to do the "Freeform to draw" tool for active mode

  I like to keep the "Draw as a free" tool, which I think is a pencil icon, activated after I use it instead of her go inactive after I use it. I need to use it again and again and would like to not have to click on it everytime.

  Any tips?

  Thank you!

  Hi jazzwheel,

  Uninstall the drive using this restart tool cleaner for your system, Download Adobe Reader and Acrobat tool - Adobe Labs & reinstall it using this link Adobe - Adobe Acrobat Reader DC Distribution.

  Let me know if it solves your problem.

  Kind regards
  Nicos

• linked clone / use of disk space

  However, I am pretty new to LM.

  I was informed that a linked clone would take about 64 MB of disk space per box. I clone a bunch of fees Windosw 2003 OS just to test this linked clone ability out.

  The boxes are 27 GB of space to use before the cloning and 9.79 GB after cloning. This is still an economy but is not considerable 64 MB.

  Can someone give me some real estimates what to expect in terms of disk space using linked clones without and the changes made to the original system.

  Our main reason for the evaluation of the LM was to take advantage of the clones related as one of our servers that clone us is 500 GB in our environments so SAN space gets quickly chewed with each environment.

  I'm curious to know what others are recording using a linked clone.

  Cheers.

  Do not run a clone that is related to your model.

  Create a configuration and add machines based on your model for this configuration.

• Error on linked clone of VMware View 4

  Hi all

  I just installed the trial version of 4 reviews. Creating linked clones, I get the following error:

  A specified parameter was not correct. Spec.Snapshot

  I know that XP image is OK I can clone the image manually.

  We are running vSphere with all patches installed.

  Anyone can shed light on this error?

  Thank you very much

  Thomas

  It's the same problem as described here: http://communities.vmware.com/thread/244269.

  You will need to disconnect / reconnect the ESX of VC servers.

• Virtual office to backup VMWare View linked Clone

  Hi all

  I would like to know what the best method is to save the virtual office linked clone on VMWare View. For the moment, I use the latest version of vRanger Pro connection with VCB integration.

  I don't know if I should save the linked clone himself or the parent VM. What the parent snapshot?

  Please advice. Thank you.

  Sang A

  in a persistent pool would really matter because there is no guarantee they would never return the same office again.  If you have a properly configured user environment then persistence or no persistence would not matter that the data would be stored in a place that would be subject to a backup system.   I don't understand the need to safeguard a VDI guest.  back to top comments templates, view servers and the vCenter server.  Comment no way.  backup windows are pretty long already to go back up throw away from devices.

  If you have found this device or any other answer useful please consider useful or correct buttons using attribute points

  Tom Howarth VCP / vExpert

  VMware communities user moderator

  Blog: www.planetvm.net

  Writer for the next book ' environment virtual VMware Infrastructure Security: securing ESX and virtual. "