Force removal code error-8072 files.

Similar Questions

• code error-8072

  I can't empty my trash. The operation cannot be completed because an unexpected error has occurred (code error-8072).

  Does anyone have an idea what this error code means? Or better yet, how to fix this?

  Stop

  Unplug your external devices

  Restart in safe mode

  Try safe mode if your Mac does not end commissioning - Apple Support

  Check your hard drive with disk utility

  Using disk utility to check or repair disks - Apple Support

  then empty the trash

  Stop and reconnect the devices and start normally.

  If the problem persists, check your system with AHT

  Using Apple Hardware Test - Apple Support

• Blue Screen: Error Code C0000218(Registry File Failure) I have NO recovery disk, boot disk, etc. What can I do?

  I have a desktop HP that I installed a new hard drive on Windows XP Home Edition Service Pack 3. He has been working very well. But, the other day, I took out my DVD ROM and try it switched with different DVD - ROM, and when I restarted my computer, I got the "blue screen error Code: C0000218 (registry file failure)." The registry cannot load the HIVE (file). \System ROOT-SYSTEM 32-CONFIG-SOFTWARE or its log or alternate. It is damaged, missing, or not accessible in writing. "So, back to my main issue, I guess. How can I fiw it without any sort of disk recovery or boot disk etc... I know I could probably go buy some sort of recovery software, but can't afford it right now. Can someone help me, please?

  You have all the Norton/Symantec products installed and if so, do you know which ones and versions?

  You start with a chkdsk/r from the XP Recovery Console.

  Here's how:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Add/Remove components error and DVD driver error: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Original title: Add/Remove components error and DVD driver error

  Yesterday, I removed several components of windows to attempt to clean my cpu. After the reboot, I noticed that my DVD drive disappeared. I tried to update the driver but told me I have the most updated version, I uninstalled and reinstalled the drive, but I still get the same error. Under Driver Details, it shows that I have a lot of drivers for my Phillips DVD player. However, the status of the device is the following: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click Troubleshoot to start the troubleshooter for this device. I've done the troubleshooting, and the two options has not fixed the problem.

  Then I tried to add windows components that I removed, thinking maybe that was the problem. However, when I try to add them, I get an error message that says: 'Setup cannot copy the file zClientm.ex_' it shows the location of this file as being in windows/i386, and of course, the file is located in this folder. So when I go to browse to locate the file, I find and click on it to open it, but I keep getting the same error message that the file is not found and Setup cannot continue.

  I realize that this problem seems very rare and weird, but any help at all would be appreciated. Thank you.

  Hello
   
   
  Code 39: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Explanation of error codes generated by the Device Manager in Windows XP Professional http://support.Microsoft.com/kb/310123

   

   

  Method 1.
  Microsoft Automated Troubleshooting Services scans your computer and detects that the root causes of common problems, then automatically solves the problems that he finds and offers additional resources if the problem is not resolved. Click run now in the article below.

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

   

   

  Method 2.
  Also, try the methods listed in the section below and check.
  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

   

   

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• LoadPanel fails with error-94 file not found code unless I am in debug mode

  I've written a dll that has a number of panels in a .uir file.

  When I have it, debug using "debug SeqEdit.exe", everything works fine.

  But, if I just use "run SeqEdit.exe" (without debugging and using the same sequence file, I get the error message:)

  "Error in the call to LoadPanel.

  Handle of parent of Panel: 0,

  The IUR filename: HiPot.uir.

  Resource Panel ID: 4.

  Error code:-94

  File not found. "

  The IUR file is always in the same place, the only difference is that I do not use the debug option.

  It's probably something simple I've forgotten?

  You should not use LoadPanelEx in this case?

• How to remove the error-120 code in labview?

  Hi all

  I use to communicate with the keithley 2410 13 LabVIEW and GPIB device.

  I made a program of sweeping the stairs of programming using keithley 2400 user manual, but on the interfacing it gives 'error code-120' i.e. error of digital data.

  Can someone tell me please how to remove this error and also check my program with orders.

  Concerning

  sak16091991

  Hi sak.

  you determine the exact command, which gives this message 'error - 120' of the Keithley.

  ymanglik should be able to explain the procedure now, it uses the same device with similar problems

  I guess it's related to this part of the code:

  

  What is the reason to use FormatIntoString here? Why add a constant number to string? Why not just write the number in the string constant? Where should the number be attached? Everything in the end?

  BTW. you don't need this structure of sequence - it's all in the stream!

• How to remove obsolete downloaded programs files, memory dump window, error reports window xp

  How to remove obsolete downloaded programs files, memory dump window, error reports window xp

  Use the disk cleanup tool in Windows XP to clean several types of files and folders are no longer, you want or need.

  "lauraschenberg" wrote in the new message: * e-mail address is removed from the privacy * _xp...

  How to remove obsolete downloaded programs files, memory dump window, error reports window xp

  http://answers.Microsoft.com/message/422fde34-2f99-464c-B6C9-a36c63e2155b
  Tags meta-tags: performance; windows_xp

  Monday 9 April 2012 08:05:37 + 0000: CreateMessage lauraschenberg

• How to code a batch file to force the reboot of the window?

  I used to run following code on batch file to restart the window, but if window is blocked, it does not.

  does anyone have any suggestions on any more powerful coding force restart the window if window is blocked?

  Thanks in advance for your suggestions

  %windir%\System32\shutdown.exe - r

  You can try adding the-f (force) option to your shutdown command:
  %windir%\System32\shutdown.exe - r f

  HTH,
  JW

• remove the error of write protect, transfer music files to the micro sd card

  remove the error of write protect, transfer music files to the micro sd card

  on micro SD card it self you have a little pass that you can move

• Error: the file is not a valid Java code file

  Hello

  IM new in the development of BB, so bad to describe my problem step by step:

  -First of all, had installed jdk-1_5_0_14-win, BlackBerry_JDE_4.6.0, j2sdk-1_4_2_18-win, Desktop manager 4.6

  -Open BB JDE, create a new workspace

  -Add a project HelloWorldDemo.jdp file (located in the sample folder)

  -Debug the application in the Simulator (9000-JDE) without any error

  -Construction of the project and generate the .axl and .cod files

  -Try to install this app (HelloWorldDemo.cod) in my device with error

  C:\Archivos programa\Research in Motion\BlackBerry JDE 4.6.0\samples\com\rim\samples\device\helloworlddemo>javaloader u load HelloWorldDemo.cod
  Charger Pocket RIM Wireless Java
  Copyright 2001 - 2007 Research In Motion Limited
  Connected
  HelloWorldDemo load error: the file is not a valid Java code file
  7832 bytes sent to ~ 15664 bps
  Disconnected

  -Also try to install the application with Desktop Manager and the .axl file, but show this message "a fatal error has occurred while updating your software to devices." Please try again ".

  My device is a Blackberry 8700

  Software: v4.1.0.351

  Help, please!

  Thank you!

  Thank you!! Problem solved.

• IO error: output file: application.cod too large data section

  Hello, when I compile my application using BlackBerry JDE, I get the following error:

  I/o Error: output file: application.cod too large data section

  I get the error when you use the JDE v4.2.1 or JDE v4.3. It works very well for v4.6 or higher.

  I have another forum post about it here.

  I also read the following article here.

  On this basis I tried to divide all of my application, but that doesn't seem to work. The best case that it compiles for awhile and the problem is that I add more lines of code.

  I was wondering if someone could solve the problem otherwise. Or if someone knows the real reason behind this question?

  Any help will be appreciated.

  Thank you!

  I finally managed to solve this problem, here is the solution:

  This problem occurs when the compiler CAP is not able to give an account of one of the data resources. The CAP compiler tries to package the data sections to a size of 61440 bytesdefauly max. "You can use the option of CAP'-datafull = N' where N is the maximum size of the data section and set the size to be something less than the default value. With a few essays on the size, you'll be able to work around the problem.

  If someone else if this problem you can use the same trick to solve!

• How to force remove a virus/malware process/file in the temp folder?

  I am sure that I met a virus/malware and she had tried several times to enter a first time (that I had said no to the permission of windows) in my hard drive and then hours later, something was repeatedly asking me to upload a file to my computer I say also to cancel. I never met this kind of behaviour before. I also tried to remove some very similar processes/files in the temp folder immediately when he arrived, but these same files name would not remove. They were not the debug log files. And I've never seen these files before. How can I force malicious deleting something like this will not remove like regular temporary files that are.

  SC

  YOU CAN NOT JUST DELETE.  You must run Malwarebytes.

• error message "Error in Script" line 30, tank: 3, error: error loading DLL, Code: 0, URL: file.

  whenever I boot, I get the following line to the 'Script error' 30, tank: 3, error: error loading DLL, Code: 0, URL: file...

  Question - what should I do to solve this problem.

  Secondly - I installed a new program that came with a new camera.  I have loaded the software but when I try to open it states the following:
  "The program cannot start because MSVCP71.dll absent from your computer."  Try reinstalling the program to fix the problem.

  I reloaded the program several times and this message continues to invent whenever I try to run the software.

  I believe that these two issues are related.

  I would appreciate help.

  Thank you

  Charlie

  Hi Charlie,

  one) you get error script on Internet explorer?

  (b) what is the brand and model of the camera?

  (c) what is the name of the camera program?

  (d) were there any changes on the computer before the show?

  Follow these methods and check if that helps:

  Method 1: You can get the script error if there is a problem with the JavaScript or VBScript code on the Web site you are looking at. Sometimes a script error can be caused by an error during the download of a Web page, but more often it is an error in the Web page itself.

  I suggest you to follow the steps in troubleshooting this article and check if it helps:

  How to troubleshoot script errors in Internet Explorer

  http://support.Microsoft.com/kb/308260/en-us

  Also refer to this article: http://windows.microsoft.com/en-in/windows7/what-should-you-do-about-internet-explorer-script-errors

  Method 2: Msvcp71.dll is a Microsoft C, C ++ Runtime library, and it is necessary for the performance of several Microsoft and non-Microsoft applications on a Windows System. It is quite possible that there is something wrong with the installation of the camera program files.

  Step 1: The MSVCR71.dll Version comes from Microsoft Visual C++ .NET 2003 with Microsoft .NET Framework 1.1.

  http://support.Microsoft.com/kb/326922

  Try download and install the latest Microsoft Visual C++ 2010 redistributable package of this link and check.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5555

  Step 2: If the error disappear not even once you have reinstalled the application causing the error, then download the DLL from the Internet or copy it from another computer with the same configuration as yours in the directory of the program, which requires that the file.

  Note: you can also copy the file to the C:\Windows\System32\

  After you have copied the file try to open the device program and check.

  Hope this helps, if you need help on Windows let us know we will be happy to help you.

• I need to learn how to remove trojan my computer files and the registry.

  Original title: cleaning your pc

  I need to learn how to remove trojan my computer files and the registry. There is a financial has now attached ittibu or something. and how to remove the event source errors and all that is connected to this.

  If you make financial transactions online and feel your system has been compromised, the more experienced people will recommend wipe you your HARD drive and reinstall your XP from scratch, but that is not always possible and of course is up to you depending on how you feel about this (you need to feel good about it).

  If you still think your system may be achieved a malware, I would do these things before you start any troubleshooting effort:

  Download, install, update and do a full scan with these free malware detection programs at:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

  Download and run Hitman Pro here and during installation to be 100% sure to refuse the installation of toolbars, decline any e-mail options, nothing to do with Bing or MSN, perform a scan time, accept no e-mail and activate the free license:

  http://www.SurfRight.nl/en/downloads/ (make sure you get the free version)

  Download and run TDSSKiller from Kaspersky:
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  The scans by operating clean, then to solve any problems.

  If you still think that you have any questions, then proceed as follows:

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  What is your Internet browser and version?

  Your system's disks IDE or SATA drives?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  Do you see that you think not you should see and when you see it?

  What do not you think that you should see?

  If the system works, what do you think might have changed since the last time it did not work properly?

  If you need help interpreting your logs in Event Viewer, follow these steps:

  Here is a method to display specific information about individual events.

  To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.

  A shortcut to the event viewer is to click on start, run and enter in the box:

  %SystemRoot%\system32\eventvwr.msc

  Click OK to launch the event viewer.

  The most interesting newspapers are usually the system and Application logs.

  Some newspapers such as security and Internet Explorer may be completely empty or have just a few items.  The default settings for XP wants do not connect all this activity, unless you need to solve a problem in these areas.  If you enable logging for them the papers fill up quickly and could adversely affect the performance of your system with all the extras (often unnecessary) activity.

  If you have Microsoft Office installed, it has its own newspapers, and they can be empty or occasional boring activity very little or, if there is no problem with your desktop applications.  It's normal.

  Not every event is a problem, some are informational messages that things work very well, and some are warnings.

  However, no event should defy reasonable explanation.

  Each event is sorted by Date and time.  Errors will be red Xs, warnings will have yellow! s.
  Informational messages have white is.  Not every error or warning event means that there is a serious question.

  Some are excusable at boot time when Windows starts.  Try to find only the events to the date and time around your problem.

  If you double-click on an event, it will open a window of properties with more information.  On the right are black up and down arrow keys to scroll through the open events. The third button that looks like two overlapping pages is used to copy the details of the event in your Windows Clipboard.

  When you find an interesting event that occurred at the time of your question, click on the third button at the top and arrows to copy the details and then you can paste the details (right click, paste or CTRL-V) the text in detail here for analysis.  Remove all personal information from your information after you paste If you are forced to do so.

  If you paste an event, it will look something like this annoying system startup event:

  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7035
  Date: 14/07/2010
  Time: 17:54:18
  User: Jose
  Computer: computer

  Description:
  The Remote Access Connection Manager service was sent successfully a starting control.

  To get a fresh start on any log of the event viewer, you can choose to clear the log (the log backup is available), and then reproduce your problem, then just look at the events around your show and troubleshoot events that are happening when you have your question.

• When I try to extract from a CD, it begins to tear, but after about 20%, it is up to the error, but no code error

  original title: Help with Media Player

  I have problems with the Media Player.  When I try to extract from a CD, it begins to tear, but after about 20%, it is up to the error, but no code error.  Is it necessary to habve a network.  I have one and am wondering if I need or is it why extraction will not work?  I don't know where the network came, but if I need it how to remove it

  Hi Nanabarb,

  1. you have made no changes to the computer before the broadcast took place?
  2. What is the format of the files you are trying to extract?
  3. do you get an error message?
  4. the problem occurs with any particular drive?

  I suggest you to see the following links to make sure that the check-out settings correct. You don't have to be on the network.

  Open the troubleshooting Windows Media Player settings Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Extract music from a CD
  http://Windows.Microsoft.com/en-us/Windows-Vista/rip-music-from-a-CD

  Rip music: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/rip-music-frequently-asked-questions