Force restart avoidable?

Similar Questions

• Apple Watch sport does not work correctly. The display is 'crazy' once or twice a week and I need to force restart it. Do you know what is happening with the watch? Is this a common failure?

  Apple Watch isn't working properly. The display is to be 'crazy' once or twice a week. And I need to force restart it. Is this a common failure?

  Hello

  This isn't a failure or defect.

  Zoom (an accessibility function) has been activated on your watch and you are zoomed accidentally tapping on the screen in a particular way.

  • To turn off the Zoom:
    • On your iPhone, in the application of the watch, go to: My Watch (tab) > general > accessibility > Zoom - put it off.
    • Or on your watch, go to: homescreen (via a simple press on the digital Crown) > (cog icon) settings > general > accessibility > Zoom - tap and enable / disable.
  • If the accessibility shortcut has been enabled and configured for the Zoom, you can also enable and disable functionality more conveniently:
    • On your watch: quickly press the digital Crown (the round button) three times.
  • To set up accessibility shortcuts:
    • On your iPhone, in the application of the watch, go to: Watch My > general > accessibility > accessibility shortcut (bottom) > select / deselect Zoom.

• Installer - CVI 2012 forces restart

  Hello

  First of all, I looked at this link.  He lists three possible reasons for the installer, forcing a re-start.  It is perhaps a bit dated (2004)

  In any case, I would delete forced reboots after the installation of CVI 2012 of an appliction on Windows 7.   I am trying to launch an executable immediately after installation (options set to launch after Installation, launch and continue) this exe checks for Windows service OR services that must be running, and facilities of auxiliary use, in my opinion, the exe's get deleted when the forced restart occurs.

  Any ideas how to remove reboot forced after running the installer?

  In addition, TEN components that I use are illustrated here:

  

  Passer-by/r on the setup.exe command line will remove the reboot.

  Kind regards

  -Wes / NOR

• Equium A210-IC4 - white screen and force restart

  My Toshiba laptop is less than a few days out of the box and on its first day, the screen went white with various lights and again but he forced me to turn off and restart to start. Happened a few times today as well with the message saying "system does not not or was closed to protect the data.

  I noticed that there was some discussion on overheating, bios and vista bugs. I'll update all device drivers tonight and the bios and see if that cures it. I don't know if there is no way to verify it is overheating or even if it's Vista bugs?

  I'll let you know how me but if someone has an inspirational thoughts on issues please let me know.

  Concerning

  > I noticed that there was some discussion on overheating, bios and vista bugs. I'll update all device drivers tonight and the bios and see if that cures it. I don't know if there is no way to verify it is overheating or even if it's Vista bugs?

  If the laptop automatically stops then this problem could be linked to the temperature inside the laptop

  Usually an overheating may occur because don t cooling modules work correctly because of the dust and debris.
  But according to your message, the laptop is not very old, and the dust should t be a problem

  So in my opinion, you must contact the ASP in your country to control!

  Good luck

• Then the display turns off I can't get it back without force restart

  When the display switches off the power due to the low battery power & I can't get this back even when I plug it into the sector and having to force the computer to restart.
  Is there a pref somewhere to turn it off?

  Hello

  When the screen turns off, exactly? How much capacity has battery at the moment? 5 % ? More?
  Try to higher level.
  When you work with your laptop and the battery level is low battery and the alarm alert will appear in the taskbar, but you will be able to continue your work several minutes or connect the power running.

  I'm afraid that your laptop reaches the critical battery level and then maybe is too late for any action.
  Set the low battery level to 10% and when the notification is shown connect power adapter immediately.
  I imagine that the screen doesn't have to be out of all.

• First use 100% RAM during import, forcing restart

  Hello, I am using first Pro CC 2015.3 and having a problem with the import. I have a 3 GB video I am trying to import, and when I do, first instantly stops responding. But, as it is often done this and snaps out of it, after a few seconds, let him. Open the Task Manager to take a look at my RAM reveals first regularly uses RAM more and more until it tops out at 100%, forcing me to restart my computer and not be able to import the images! I don't know how first could do that since I have been easily import files of 10 GB and more on a regular basis. CPU to 100% and stay there while he tries (unsuccessfully) to import images. How could it be, so first have only 11GO allocated to it as a very unlikely maximum?

  My hardware configuration is:

  -Card mother MSI AM3 + with a 6-core AMD FX6350 3.9 GHz processor

  -Windows 10 64 - bit, home edition

  -Graphics card MSI AMD Radeon R9 380 with 2 GB of DDR5 memory video memory

  -16 GB OF RAM DDR3

  -Windows and programs installed on SSD read media HARD drive with plenty of space on both

  -All drivers and software are up to date

  Turn off "Enable accelerated h.264 decoding Intel (requires restart)" go to Edit/Preferences/Media and uncheck the box!

  

• Weird Graphics problem, leads eventually to force restart or same BSOD

  I'm fairly certain that it's associated with firefox, or plug or maybe compatibility issue, however I'm getting weird graphic blocks. the occasionlly seem to start from a flash image in a page, but I can't say this is the cause 100%. Looks like small multicoloured boxes located in weird habits. and causes other odd graphics, it's even worse, more I gave it the value. Once for the heck of it I drove up and down scroll bar about 10 times very fast and it makes a BSOD. These odd graphs do not always appear if I do not open Firefox (use IE today), but they do not disappear if I see and then stop Firefox. Usually I have to restart the computer, because they take too much of the screen, I see nothing. It does not change even if when I move windows and others, they are not limited to the Firefox window and spread to the office empty too.

  I think that the settings manager for flash player in the control panel of the operating system has no hardware acceleration still options. From now on, you may need to right click on a video in a web page to enable / disable hardware acceleration of individual flash.

• Mac has constantly force restart in the middle of using Mac

  Hello

  My Macbook air constantly restarts in the middle of using it. It was past 1-2 times / day for the last 2 weeks. It doesn't happen when I open application or when I do some activity, as far as I'm concerned. When it stops, the screen looks like the image below. I also have the text in the report that I sent to Apple every time that happens, if that helps. What do you think is the cause?

  

  OS x: when your computer spontaneously restarts or displays "your computer restarted because of a problem." - https://support.apple.com/HT200553

  OS X Yosemite: If your Mac restarts and a message - https://support.apple.com/kb/PH18791

  How to troubleshoot a kernel panic - http://www.macworld.com/article/2027201/how-to-troubleshoot-a-kernel-panic.html

• My iPhone 6 won't accept that the first digit of my password. I tried to force restart and no help?

  iPhone 6, I can only enter a number for the password. Tried to force the reboot and no help. Cannot access my phone. I can send text on the phone and calling on the phone.

  ???

  Assuming that you are talking about the access code, take a look at this Apple Support article:

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• Updates stop on 3/3, forces restart

  Sorry if this has been requested, but my laptop keeps give updates just before going to my office, it says "editing updates: stage 3 of 3 0% complete". " It remains this round 3 minutes remaining at 0%. It rises welcome change by stopping and did the same thing again and again. I tried to remedy by leaving my laptop on overnight and when I opened ut it was on my desk and in 30 seconds it turns off. PLEASE HELP:)

  See this article: the update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Suggest:

  Method 2: Start the computer in safe mode and then use restore system TaurArian [MVP] 2005-2010-Development Services updated

• ChckDsk frozen at step 5 of 5, I can force restart?

  I plan to chkdsk to run at startup and to correct errors.  It is a hard drive that I use for storage of media, not my Boot C: drive.

  CHKDSK has run for more than 12 hours, during the night, it got stuck on step 5 of 5, or 40%.

  How can I cancel chkdsk without damaging my files on this drive?  I have years on recorded images and will be crushed if something happened to them.  Thanks in advance for the help.

  I don't know how to say if there were errors, but here is a screenshot that I got with my camera.

  

  Andy

  "There are errors in the file system and you have only 2 choices.  Restart and take a chance or wait for something that may or may not complete.

  Don't you wish you had a backup about now?

• Devices USB freeze intermittently. force restart 2 - 3 times a day

  I have a HP Pavillion a6827c desktop who developed problems with USB 2.0 devices.  There are four rear ports and two front.  I got a 10 port AC powered USB hub a few months ago plugged everything in, then connected on one of the ports on the back without success.  The opportunity to plug in another ball of command in one of the ports before will get the cursor to move but sometimes the keyboard is blocked as well.  So only a reboot will put things straight.

  I get frequent warnings that a USB device has failed, but I have been unable to isolate it.  I unplugged each device one at a time to see if the 'unknown' warning disappears without success.

  I disabled the two services that seem to create the most entries in the event log: BTHUSB (Bluetooth) and good morning Services.  Things seem to go better for awhile and it flares up again.  Let me be clear: this isn't just a problem of keyboard trackball; potentially the printer, scanner, printer p-touch, backup battery... each USB device is subject to failure, not necessarily at the same time.  But the reboot gets everything back online again, at least for a few hours.

  I hate having to replace this computer if soon only to find there could be an easy fix, so I ask: can I do?  Is this software or hardware?

  Windows 7 Home Premium 64-bit

  Nobody seems to address so I ended up finding a bandage myself: I just turned off the power to the computer option never go to sleep.  No more the entrapment of USB devices.

  I always welcome the monitors to go to sleep after 20 minutes, but the processor remains awake all the time.

• First Pro CC force restart my computer when I open a project

  Hello

  I have been using first Pro CC without problem on my laptop until today.  Today, I started the program and click on it to open a project, and then loading the project it dint rebooted my computer.  I tried 4 or 5 several times (closing all unnecessary background programs in the Manager of tasks, disabling Cortana, holding my cell phone on the table to prevent it from overheating and believe that it does not heat up too much, etc.) and every time he did exactly the same thing in the same exact spot, while loading a project.  Anyone know what is the cause and what can I do about it?  I have a Dell Inspiron 1500 series and I run Windows 10, I think it is the most recent update.  Data sheet: CPU is Intel Core i7-5500U CPU @ 2.40 GHz, 8 GB RAM, OS 64-bit and x 64 processor.

  Help, please!  I'm so frustrated.  It is now four o'clock in the morning and I have been looking and trying to solve this dedicated... longer that I should really admit.

  jessicab23331438 wrote:

  I think it is the most recent update.

  Can you open other projects, or start a new project?

  Have you recently installed fonts?

  You can do a system restore to a point before the update.

  Alternatively, you can try to update or restore your graphics driver.

• 17 GB of drive space missing after the crash of vmware fusion and force restart

  During my last installation of SuSE Linux, I had to manually reboot my system because my system crashed.

  After the reboot, I deleted the virtual machine of Susa and started again installation. To my surprise 17 GB were mission on my hard drive and I can't find the files responsible for this. I checked my system of files larger than 500 MB via ' find /-size M + 500 ", but found nothing: (.)

  Do you know where are the 17 GB or where vmware fusion may have experienced a system core dump or something like that?

  Please help, I need the 17 GB for resettlement :).

  Thank you.

  Simon

  I have discovert that was missing only 3 GB of the 20 GB that I deleted before trying to install SuSE. But I deleted all the files that I specified after the crash. The trash is always empty so I'm a bit confused were are the 17 GB.

  Refer to the section of the disk space of FAQs on VMware Fusion

• Restart of the force after deployment

  Hi all

  I'm developing an application with JDE puglin for Ecplipse (api 5.0, 8520). Can I know if is restart possible force (the same as alt + caps + delete) after deployment?

  I want to do it because I have to register a listener at the start (i.e. when ApplicationManager.getApplicationManager (.inStartup) is set to true).

  Thanks in advance.

  Kind regards

  Gianni.

  I found that may not force restart but, if necessary, automatically invited to user if reboot the device. Then, maybe, he's wrong my startup... I ask the Java development.

  Sorry for the misunderstanding.