Installer - CVI 2012 forces restart

Similar Questions

• Generator of CVI 2012 Distribution always asks for disc

  I have CVI 2012 and drivers installed on my Windows 7 computer. It is the only version of the CVI and drivers that I have installed on my computer.

  However, whenever I try to build a distribution, I wonder to insert the CVI installation disc. It's very annoying. Why is this happening?

  Okay, I think I found what I was doing wrong.

  Apparently, the option to cache the current installed software is not an option until you have been presented with the need to install from the disc.

  (At this point I took no notes, so this may be inaccurate or misinterpreted)

  On this Panel you ask something like "you have the installation discs. If you say no, they ask where to install from. Here, I have indicated to the DVD disc with the installation disc and on this Panel was the cache option. (At least this is how I remember it.)

  What was confusing, it was that I had selected cache on the drivers... Tab that I wasn't expecting to have the option or need to do later.

• Windows 8 upgrade retains fault make sure all files required for installation are available, and restart the installation. Error code: 0x8007025D

  Hello

  Like so many others, I am fighting to get 8 upgraded windows. I have tried all the methods mentioned upgrade

  on the forums without success. I have greated iso dvd, tried to use the USB and the installation of office.

  Error: Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. [Error code: 0x8007025D]

  The error logs:

  Setupact.txt

  2012-11-04 01:02:27, MoveOldOSFiles IBS Info [0x0600a6]: got through [C:\Windows\] to [C:\Windows.old\Windows\]
  2012-11-04 01:02:27, info [0x06412c] IBSLIB SetCheckpoint: Checkpoint ("WinPEArchiveOldWindowsFoldersDoneCheckpoint") current...
  2012-11-04 01:02:27, info [0x06412e] IBSLIB SetCheckpoint: Checkpoint 'WinPEArchiveOldWindowsFoldersDoneCheckpoint' have been correctly set up.
  2012-11-04 01:02:27, info [0x06412c] IBSLIB SetCheckpoint: Checkpoint ("WinPEImageApplyReadyCheckpoint") current...
  2012-11-04 01:02:28, info [0x06412e] IBSLIB SetCheckpoint: Checkpoint 'WinPEImageApplyReadyCheckpoint' have been correctly set up.
  2012-11-04 01:02:28, info [0x06009e] IBS DeployWIMImage:Calling IDepWIMImageResolved::Apply...
  2012-11-04 01:02:28, info [0x0606cc] IBS calling WIMApplyImage (flags = 0 x 180)...
  2012-11-04 01:08:36, ApplyWIMCallback IBS Info [0x0600ae]: a new attempt on the record [offset 0000000075fdfa0a, length 1526856] RULE is [605]
  2012-11-04 01:08:36, ApplyWIMCallback IBS Info [0x0600ae]: a new attempt on the record [offset 0000000075fdfa0a, length 1526856] RULE is [605]
  2012-11-04 01:08:37, IBS Info [0x0600ae] ApplyWIMCallback: a new attempt on the file [C:\Windows\WinSxS\amd64_nv_lh.inf_31bf3856ad364e35_6.2.9200.16384_none_473133365499807b\nvlddmkm.sys] RULE is [605]
  2012-11-04 01:08:41, IBS Info [0x0600ae] ApplyWIMCallback: a new attempt on the record [offset 0000000075fdfa0a, length 1526856] RULE is [605]
  2012-11-04 01:08:41, IBS Info [0x0600ae] ApplyWIMCallback: a new attempt on the record [offset 0000000075fdfa0a, length 1526856] RULE is [605]
  2012-11-04 01:08:41, IBS error [0x0600af] ApplyWIMCallback: error application C:\Windows\WinSxS\amd64_nv_lh.inf_31bf3856ad364e35_6.2.9200.16384_none_473133365499807b\nvlddmkm.sys. RULE [605] [gle = 0x0000025d]
  2012-11-04 01:08:41, error [0x0606cc] IBS WIMApplyImage failed; HR = 0x8007025D [gle = 0x0000025d]
  2012-11-04 01:08:42, error [0x0600a1] IBS DeployImage:Image request failed; HR = 0x8007025D [gle = 0x0000025d]
  2012-11-04 01:08:42, error [0 x 060082] IBS Callback_ImageTransfer: unable to set the OS image. HR = 0x8007025d [gle = 0x0000025d]
  2012-11-04 01:08:42, PublishCriticalError IBSLIB Info: publish error message critical [Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. [Error code: 0x8007025D]
  2012-11-04 01:08:42, info [0x0a013d] UI accept Cancel. Leaving the Page's progress.
  2012-11-04 01:08:42, info UI entering Page Cancel.

  Setuperr.txt

  2012-11-04 01:08:41, IBS error [0x0600af] ApplyWIMCallback: error application C:\Windows\WinSxS\amd64_nv_lh.inf_31bf3856ad364e35_6.2.9200.16384_none_473133365499807b\nvlddmkm.sys. RULE [605] [gle = 0x0000025d]
  2012-11-04 01:08:41, error [0x0606cc] IBS WIMApplyImage failed; HR = 0x8007025D [gle = 0x0000025d]
  2012-11-04 01:08:42, error [0x0600a1] IBS DeployImage:Image request failed; HR = 0x8007025D [gle = 0x0000025d]
  2012-11-04 01:08:42, error [0 x 060082] IBS Callback_ImageTransfer: unable to set the OS image. HR = 0x8007025d [gle = 0x0000025d]

  Any help will be greatly appreciated.

  Thank you for all the answers. Finally managed to get installed it. Download 4 times. Whenever he stopped at different percentages, so I expected the download is corrupt. Finally in the format of my other readers, installed windows 7 on it and then downloaded windows 8. Finally, it worked. Had to be something with my player.

  Thanks again.

• Apple Watch sport does not work correctly. The display is 'crazy' once or twice a week and I need to force restart it. Do you know what is happening with the watch? Is this a common failure?

  Apple Watch isn't working properly. The display is to be 'crazy' once or twice a week. And I need to force restart it. Is this a common failure?

  Hello

  This isn't a failure or defect.

  Zoom (an accessibility function) has been activated on your watch and you are zoomed accidentally tapping on the screen in a particular way.

  • To turn off the Zoom:
    • On your iPhone, in the application of the watch, go to: My Watch (tab) > general > accessibility > Zoom - put it off.
    • Or on your watch, go to: homescreen (via a simple press on the digital Crown) > (cog icon) settings > general > accessibility > Zoom - tap and enable / disable.
  • If the accessibility shortcut has been enabled and configured for the Zoom, you can also enable and disable functionality more conveniently:
    • On your watch: quickly press the digital Crown (the round button) three times.
  • To set up accessibility shortcuts:
    • On your iPhone, in the application of the watch, go to: Watch My > general > accessibility > accessibility shortcut (bottom) > select / deselect Zoom.

• WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D,.

  IM TRYING to re - INSTALL WINDOWS VISTA ON MY T-6321 to the front door, BUT WHEN I INSERT THE DISC, AND INSTALL, a MESSAGE APPEARS SAYING: WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D, SHOULD ALL BE ON THE DISCALREADY?

  Hi JRCLNSIN100,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         What is the disk you use to reinstall?

  ·         Is this a recovery or reinstalling the disc you are using?

  ·         When exactly do you get this error message?

  ·         What is the edition of Windows Vista, you try to install?

  ·         How old is the drive that you are using?

  ·         How are you starting the installation process?

  After researching the error 0x8007000D code is essentially due to file corruption and a problem with the drive itself.

  First check if you have scratches or dust on the disc and clean the surface and try again.

  To check if the disk is wrong, you will need to copy the contents of the DVD to the hard drive and try to install using that.

  To perform a flat installation of Windows Vista, follow these steps.

  Note The hard disk must have at least 3 GB of free space on the disk for the Windows Vista installation files. The hard disk must have at least 15 GB of additional disk space to install Windows Vista. For more information about system requirements for Windows Vista, see the Microsoft Web site at the following address:

  http://www.Microsoft.com/Windows/products/windowsvista/editions/SystemRequirements.mspx

  1. Insert the Windows Vista installation disc.
  2. Start Windows Explorer.
  3. In Windows Explorer, click to select the drive for the Windows Vista installation disc.
  4. On the Edit menu, click select all.
  5. On the Edit menu, click copy.
  6. Click to select the hard disk you want to contain the flat installation files.
  7. On the file menu, point to new, click the folder, type Windows Vista Setupand then press ENTER.
  8. Double-click the Windows Vista Setup program, and then click Paste on the Edit menu.
  9. Double-click Setup.exe, and then follow the instructions that appear.

  See the link below for more information on flat installation.

  How to perform a flat installation of Windows Vista

  http://support.Microsoft.com/kb/928902

  This problem can also occur if the firmware of the DVD drive is defective or obsolete.

  If the step above does not resolve the question suggests that you install the latest drivers for the DVD player on the computer.

  For more information please visit the link below.

  Error message when you try to install Windows Vista by using the DVD drive on the computer: "Windows cannot install required files".

  http://support.Microsoft.com/kb/930984

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thanks and greetings

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• CS5 install Fail: installation met an error(-1) during installation. If please restart the computer and try again.

  Running CC of Photoshop and Lightroom CC on a MacBook Pro (with CS5/Adobe Bridge).

  Adobe Bridge broke so I uninstalled the full program of CS5 and when I try to reinstall from the CD, I get the dreaded installation met an error(-1) during installation. If please restart the computer and try again. "message.

  Have not been able to find a solution for the moment. Any help would be greatly appreciated,

  Thank you!

  [Duplicate message deleted... post the same question more than once is confusing... MOD]

  [This is an open forum, not a direct line to Adobe support... you have to wait a response]

  Maybe it's a fake because of Mac El Capitan and OLD programs error

  This information is a MUST to install old programs on Mac El Capitan

  -You can't get the same error message, but these two links will help with older programs

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  FAQ on the Mac 10-11 https://forums.adobe.com/thread/1979303

• PowerEdge 1850 - Win Server R2 installation Issues 2012

  Try to install Win Server R2 2012 on my PowerEdge 1850 servers.  I have the installation on a USB bootable (created using Rufus).  The system starts and begins to load files in preparation for the installation of Windows and then I see the following:

  

  I tried recreating the USB on different drives and you still receive this error message.  I also tried to turn the OS Install option in the BIOS on Off.  When I do this, it goes to the Windows Logo but immediately fails and restarts.  Any ideas?

  8G servers are not compatible with the R2 in 2012... not all simply not supported - not compatible. You can run in 2012, but not R2. 2008 R2 is the ideal operating system for this generation of server.

• Force restart avoidable?

  Hello.  My name is Sid and during a trip to Greece today, I made the huge mistake of accidentally holding down the power button on my iPhone 6s for too long, which prompted the restart function.  Unfortunately, since January, I needed to research why I get iPhone to full storage of messages (and Yes, I know it's my fault and I should have been backup all the contents of my regularly).  That said, I have thousands of photos from around the world and other items that have been created since January that I can't imagine losing forever.  My question is to know if taking my iPhone from a store or waiting until I'm home (I actually visit the headquarters of Apple regularly) would mean that someone might be able to restore what it was earlier today.  Are there opportunities?  If so, I'll just stop using my phone and buy a camera for the rest of my trip.  From now on, the phone gives me the restore options to January or from anywhere - this one, everything in isn't ideal.  Thanks in advance for any help or advice.

  There are several misconceptions about your post above. First of all, a true forced reboot is:

  Hold down the Home and Sleep/Wake buttons at the same time for about 15 seconds, until the Apple logo appears.

  If you did, you wouldn't lose anything. I did hundreds of francs on my own iOS devices and never lost anything. I don't know any person here who has lost anything. Therefore, I don't know what you were doing. Hold the phone just turned off power button if you then slide off the screen as he invites you. You wouldn't lose anything that way either.

  So what have you lost today? What has changed? If you have not all newer than January backups AND you have lost your photos already, it's too late. Neither you nor Apple will be able to retrieve the photos. Look on your album recently removed, they could be there.

  If explain you in more detail, we may be able to help.

• Equium A210-IC4 - white screen and force restart

  My Toshiba laptop is less than a few days out of the box and on its first day, the screen went white with various lights and again but he forced me to turn off and restart to start. Happened a few times today as well with the message saying "system does not not or was closed to protect the data.

  I noticed that there was some discussion on overheating, bios and vista bugs. I'll update all device drivers tonight and the bios and see if that cures it. I don't know if there is no way to verify it is overheating or even if it's Vista bugs?

  I'll let you know how me but if someone has an inspirational thoughts on issues please let me know.

  Concerning

  > I noticed that there was some discussion on overheating, bios and vista bugs. I'll update all device drivers tonight and the bios and see if that cures it. I don't know if there is no way to verify it is overheating or even if it's Vista bugs?

  If the laptop automatically stops then this problem could be linked to the temperature inside the laptop

  Usually an overheating may occur because don t cooling modules work correctly because of the dust and debris.
  But according to your message, the laptop is not very old, and the dust should t be a problem

  So in my opinion, you must contact the ASP in your country to control!

  Good luck

• Then the display turns off I can't get it back without force restart

  When the display switches off the power due to the low battery power & I can't get this back even when I plug it into the sector and having to force the computer to restart.
  Is there a pref somewhere to turn it off?

  Hello

  When the screen turns off, exactly? How much capacity has battery at the moment? 5 % ? More?
  Try to higher level.
  When you work with your laptop and the battery level is low battery and the alarm alert will appear in the taskbar, but you will be able to continue your work several minutes or connect the power running.

  I'm afraid that your laptop reaches the critical battery level and then maybe is too late for any action.
  Set the low battery level to 10% and when the notification is shown connect power adapter immediately.
  I imagine that the screen doesn't have to be out of all.

• Windows Server R2 2012 unexpected restart

  Hi guys,.

  I have a problem with one of my DELL servers running Windows Server 2012 R2 Std. It is a new Server Power Edge R630.

  The problem is that it has restarted unexpectedly by itself. So far, it has happened twice.

  I raised this issue to DELL technical support to check. From their results, he was not due to hardware failure. Minidump files they pointing dxgkrnl.sys system files causing the reboot.

  

  Someone has any idea how to solve this problem?

  Thank you in advance.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Xp pro installation gets past the copied installation files and then restarts, rather than continue with install it starts from the beginning again.

  new installation of XP pro on a Dell Inspiron mini

  Xp pro installation went copied files Setup then restarts, rather than continue with an install it starts from the beginning again, laptop is configured to boot from the hd, but does not do that, I reset bios to default and hd settings has been reformatted, the cd for this laptop drive is usb because it has not built in 1... If I try and I remove the usb cd when reboots after copid setup files it told her there is no operating system...

  any help much appreciated...

  Hi, Leon,

  Always include computer make and model, please.  Thank you.

  Research in the Bios (reboot and press F1 or F2 depending on your system, check that all usb options are enabled (for example, USB legacy or support for USB 2.0 devices).)

  If there is a timeout parameter, set it to Max.

  Then, find the boot device priority section

  A USB flash drive, which is usually listed as USB - HDD, but may be listed as a removable device, will have a priority very low start.

  Rearrange the boot device priority so that the flash drive has a higher priority than the hard drive.

  Install Windows XP from USB key

  • Insert the USB key into the USB port on the computer.

  • Open the "I386" folder and find the file "Winnt.exe".

  Double-click on the "Winnt.exe" to launch a command prompt BACK to an installation of Windows XP.

  Type the path of the location of your "I386" folder in the DOS window. For example, if your USB is the letter "D" in your "My Computer" window, type "d:\i386" without the quotes and press the Enter"" key.

  Let the installation program copy the Windows XP installation files on your computer.

  Restart your computer to a command prompt. The Windows XP Setup will continue automatically.

  Follow the on-screen instructions to complete the installation. The program will ask you your Windows XP product key in this process.

  http://www.ehow.com/how_6912418_install-Windows-XP-USB-drive.html

  Make a bootable memory card or USB key using PEBuilder

  http://www.tech-recipes.com/Rx/2583/making_a_usb_drive_or_memory_card_bootable_using_pebuilder/

• Windows XP installation causes the laptop restart on the installing devices portion.

  I have a HP dv9000 series, which came with vista and I decided to downgrade to XP. After having inserted the WinXP CD and continue with the installation of the configuration, starts about 39mins and then begins to install devices that gets stuck and then to halfway through the process and my cell phone begins to turn off and then back on. When he turns on the system begins to restart the same installation configuration and then turn back off the coast to the installation of devices.

  Ive google which could help for hours. things like type SHIFT + F10 and then type tskmgr.exe and ending the files of svchost.exe. This was do nothing. The computer restarts again to the installation of devices.

  I read it could be a driver, but that the cause could be could be?
  We hope to get this fixed a problem and thank you all who try and help me.

  You can get the best expert advice for laptop HP attending the Forum Notebook HP. Carey Frisch

• First use 100% RAM during import, forcing restart

  Hello, I am using first Pro CC 2015.3 and having a problem with the import. I have a 3 GB video I am trying to import, and when I do, first instantly stops responding. But, as it is often done this and snaps out of it, after a few seconds, let him. Open the Task Manager to take a look at my RAM reveals first regularly uses RAM more and more until it tops out at 100%, forcing me to restart my computer and not be able to import the images! I don't know how first could do that since I have been easily import files of 10 GB and more on a regular basis. CPU to 100% and stay there while he tries (unsuccessfully) to import images. How could it be, so first have only 11GO allocated to it as a very unlikely maximum?

  My hardware configuration is:

  -Card mother MSI AM3 + with a 6-core AMD FX6350 3.9 GHz processor

  -Windows 10 64 - bit, home edition

  -Graphics card MSI AMD Radeon R9 380 with 2 GB of DDR5 memory video memory

  -16 GB OF RAM DDR3

  -Windows and programs installed on SSD read media HARD drive with plenty of space on both

  -All drivers and software are up to date

  Turn off "Enable accelerated h.264 decoding Intel (requires restart)" go to Edit/Preferences/Media and uncheck the box!

  

• Weird Graphics problem, leads eventually to force restart or same BSOD

  I'm fairly certain that it's associated with firefox, or plug or maybe compatibility issue, however I'm getting weird graphic blocks. the occasionlly seem to start from a flash image in a page, but I can't say this is the cause 100%. Looks like small multicoloured boxes located in weird habits. and causes other odd graphics, it's even worse, more I gave it the value. Once for the heck of it I drove up and down scroll bar about 10 times very fast and it makes a BSOD. These odd graphs do not always appear if I do not open Firefox (use IE today), but they do not disappear if I see and then stop Firefox. Usually I have to restart the computer, because they take too much of the screen, I see nothing. It does not change even if when I move windows and others, they are not limited to the Firefox window and spread to the office empty too.

  I think that the settings manager for flash player in the control panel of the operating system has no hardware acceleration still options. From now on, you may need to right click on a video in a web page to enable / disable hardware acceleration of individual flash.