Forestry USE. AdditionalData to the database

As part of the design, we have before us, is there a way I can dynamically load data into the database?

The container for the object to be measured has container AdditionalData which is PropFlags_UnstructuredProperty. It allows easy access to add new data in for test purposes. It is requested that the test developer can put additional data in this so that it appears in the results/reports. Practices for the generation of reports NI TestStand and customization explains how to add values in this container well under "logging USE and additional data to the report header Station (TestStand 2013 and later only).  My question is, I want to make these data available to be put in the database, not only in the report:

Parameters.UUT.AdditionalData.SetValString ("Manufacturer.Name", 1, "National Instruments").

Parameters.UUT.AdditionalData.SetValString ("Manufacturer.Location", 1, "Debrecen, Hungary").

Parameters.UUT.AdditionalData.SetFlags("",0,PropFlags_IncludeInReport)

So if someone does, I would be able to store all these in the database. I created a new table based on the result of USE which has 4 columns, ID, name, TestResultID, value that should be sufficient to meet this requirement.  Each property in AdditionalData will be an entry to this other table with the TestResultID being a foreign key to the table UUT_Result.

How can I get the database plugin to loop in the data, or what I have to write this function in my process template?

You can connect the UUT. Table AdditionalData properties as properties of a step in a new result.

1. Add a new Table that is bound to the key of the object to measure. Refer to the UUT_PROP_RESULT_ADDITIONAL_DATA document under "Test Log USE additional results - generic Recordset" schema in the attached schema file.
2 add steps to create the object to measure. AdditionalData properties, and then have a step that takes the object to measure. AdditionalData, it clones and adds it as a property of the result of a step called UUTAdditionalData. (example sequence attached file)

3. then create a schema that will record the additional data container located accordingly step when his path of the property contains the name of the UUTAdditionalData property. Note the precondition on the declaration of UUT_PROP_RESULT_ADDITIONAL_DATA and the options to cross stops processing a result once if the UUT_PROP_RESULT_ADDITIONAL_DATA table deals with the property (so it will be not as recorded in the PROP_RESULT table). Schema file (TestStandDatabaseSchemas.ini) is attached. You can directly import the schemas from the schema file in the Options dialog box database to log.

I hope this works.

Kind regards

Sahana

Tags: NI Software

Similar Questions

  • Expdp/impdp can be used to upgrade the database (instead of DBUA) R12

    Hi all

    (1) could as possible to convert the database to UTF8 value as part of the database
    upgrading process within the update Rel12? Any suggestion on how to do it? Any doc doc/procedure?

    (2) according to Rel 12 guide upgrade applications, I can follow "interoperability Notes: Oracle Applications 11i.
    with Oracle Database 11 g 2"doc to update my database. But this doc suggested using DBUA.
    Can I use expdp/impdp instead so I can convert the character at a time? All documentation
    that I can follow to use expdp/impdp to do the upgrade?

    (3) are there measures to specify/extra for Rel12 if I want to convert the characters of the base
    the value UTF8?

    Thanks in advance!

    (1) could as possible to convert the database to UTF8 value as part of the database
    upgrading process within the update Rel12? Any suggestion on how to do it? Any doc doc/procedure?

    I do not. You must upgrade, and then convert the characters or convert then upgrade - you can save an SR to confirm this with the support of the Oracle.

    (2) according to Rel 12 guide upgrade applications, I can follow "interoperability Notes: Oracle Applications 11i.
    with Oracle Database 11 g 2"doc to update my database. But this doc suggested using DBUA.
    Can I use expdp/impdp instead so I can convert the character at a time? All documentation
    that I can follow to use expdp/impdp to do the upgrade?

    Only DBUA is the way supported in Oracle EBS instance level. Please see this similar thread - Oracle EBS 11i Database Upgrade to 11 GR 2 - Upgrade method Support Manual is?

    (3) are there measures to specify/extra for Rel12 if I want to convert the characters of the base
    the value UTF8?

    Please see the documentation referenced in this thread - ADADMIN convert character set CUSTOM_TOP

    Thank you
    Hussein

  • Adobe Muse can be used to create the database of Web sites?

    Adobe Muse can be used to create database, Web sites or is it only, through 'replace the image through to travel away from your computer'.

    Hi Edgar,

    I'm afraid that this is not possible in Muse at this stage, I will recommend that put you that on our ideas here, section ideas for features in Adobe Museand inform our team of devs to this requirement.

    In muse, you can conceive only of static content. Dynamic content that you can return via DB, you need to write custom code and insert it into Muse via the option "object-> insert html ' or 'properties-> metadata-> html for the head.

    - Abhishek Maurya

  • Check the installed oracle components are actually used in the database

    I got a new database I have to optimize. So I think to delete some installed components that I think are not be used somehow in the database (IE procedures calls etc.). I see a whole bunch of components as "ODD", 'ORDIM', which I think are not used, but previous DBAs have installed them. So, is it possible to make sure that no part of the database are actually using these components so that I can remove these components. Also, what are your expert comments on it?

    Is it a production or a development environment? If an object is not used then this isn't necessarily a problem (performance wise) unless it is either cluttering up your dictionary or raising concerns regarding the consumption of unnecessary space. Personally, I would recommend that it is preferable to resolve what is to be used / taken of resources. It is maybe once a year report or a few old utility out once a year, the best monitoring, why those things are there.

    If you go down the road of a fall, rather than drop anything immediately block accounts for an agreed period to ensure that the scheme is not used & check all references other schemas of objects in the schema that you intend to drop, potentially of audit to check if they are being called by other patterns / verification dba_dependencies between schemas and objects using a hierarchical query to check the sub-levels.

    There are also quite a few standard Oracle components that are installed by default that have interdependencies and not necessarily be used in the dictionary (control dba_features_usage_statistics)

  • Cancel the database operation

    How can I cancel the database query if take as much time at run time.

    It is not possible to cancel your PL/SQL procedures or triggers of your forms or db
    But if your block is based on the database property Yes and you query on the block as the use of EXECUTE_TRIGGER then you can use
    the "Interactive Mode" value of the form Non-blocking
    By doing this your forms can give you the control to use to cancel the database query.

  • Should I really need to move the database on the upgrade to vcenter

    I have vcenter on 32-bit, windows 2003 and installing vcenter 4.1 I had to migrate the database to the new windows x 64 environment.
    Cool, I installed a new windows 2008 x 64 STD, vcenter 4.1 installation on top is OK. (default installations)
    I have 2 ESX server in a cluster running in HA mode.

    Here's my question.

    1. what happens if I have used to migrate the database and disconnect the 2 ESX hosts and reconnect on new vcenter?
    2 would be my (NICs, HA confiscation etc.) configurations automatically moved to new vcenter if I'm not going to migrate from the old database?

    No, this config resides in each host, not on the vCenter database.

  • Help understand the database sites...

    Hi all

    I was hoping someone could give me some advice. I apologize in advance to be really stupid Im really new on this...

    I recently had a go at dreamweaver cs3, as I have an idea for a Web site. I love so far. My question is if this, say I wanted to produce a web site that sold used... a bit like e - bay, people download their images and their information selling etc and it appears on the line and the transaction is also online. Of course, it comes to database, but can I do this using plain old MS access or what I need to learn a new program database?

    I think that what I'm asking, in a round point average, what should I know to learn how to produce a website as above. I really don't want to spend hundreds of pounds on the books that aren't relevant, as I have in the past

    Thanks guys for any notice of information for a novice novive.

    Hello

    Using access for the database depends on the amount of users you plan access is very limited in this regard, perhaps a better solution is to use php/mysql, because these are much better taken care should you have a problem.

    Seehttp://www.adobe.com/devnet/dreamweaver/application_development.html.

    PZ

  • How to display the name of the database?

    Hello

    I want to display the name of the database on the homepage of my application.

    Is there an element of the APEX or the workspace view that can be used to retrieve the database name based?


    Thanks in adavnce
    Annie

    Hello:

    What model/models use your pages? On page page-defintion look under the section "Models" and choose the one that is used for the "Page".
    The substitution string must be terminated with a '.' as in & G_DBNAME.

    CITY

  • DBUA always necessary when installing the game patches before the creation of the database?

    Hello!

    I'm actually reinstall my tesserver from scratch. Of course finally system shoul be completely corrected. As performer DBUA really is the boring part of the application of the fix, I wonder if I have to run DBUA at all, if I do all the patches before you create the database. As much I know it shouldn't be necessary, right?

    My plan is to do the following

    -Install 10.2.0.1
    -Install Patch 10.2 .0.4
    -Install processors
    -Create the database
    (-> performance DBUA is not necessary)

    I'm wrong or what I need to use DBUA anyway? BTW: the database will be a "new database" (not recreated from a template).

    (I think that databases in the models are just restored databases and should be corrected in any case, after the creation).

    Best regrards,
    Marcus

    DBUA is used to upgrade the databases after you patched. Since you will create a new database after you apply the hotfix, you don't need to update.

  • How to tie the two serial numbers using test including the tie in the database.

    I have two separate committees, I need to link the serial number too.  One is being tested as a separate unit, then the two are tested together, I need to make sure that I connect them in the database.  Don't know how to do it, looking for any input I can get.  Using a labVIEW vi to request the entry of a Board, and then use information interface to USE testbed for UUT of the hand.

    I have juries, one of the boards, A onboard, was tested by a different sequence file, then A is connected to Board B, and then they are tested as a complete set.  Received a few suggestions on how to save the two serial numbers, but went with a popup message added types of step (modified record results), and then just have the user scann the second number in and it stands as one of the results of the step in the database.

  • Need to create useful reports from the results of TestStand (.mdb) database

    Any help is greatly appreciated!

    We need create reports from the results of TestStand (.mdb) database.  I was not able to find much online.

    Details:

    In 2014 TestStand, we have configured to use Access database management system.  Otherwise, the database settings are default.

    These reports will be targeted to managers and engineers.  They need to show objects as:

    Which EHR past/almost?

    For each DEGREE, what past/a failed test?

    Thanks for all the suggestions!

    Because I couldn't find anything pre-made, I created reports from scratch using queries in Microsoft Access 2010.

  • Reading large data using the database connectivity

    Hello

    I use the Labview database connectivity toolkit to connect to my database sqlitev3 (I'm using ODBC). I just have to connect to the database (using the block of open_connection) and read all the values inside (using the select_data block). The problem is that my database is huge (about 2 GB), and I get this error:

    . VI NI_Database_API.lvlib:Rec FETCH Recordset Data (R)-> NI_Database_API.lvlibB Tools Select Data.vi-> real_web.vi-> real_web.vi.ProxyCallerADO error: 0x8007000E Exception occurred in provider: not enough memory is available to complete this operation. in .vi NI_Database_API.lvlib:Rec Fetch Recordset Data (R)-> NI_Database_API.lvlibB Tools Select Data.vi-> real_web.vi-> real_web.vi.ProxyCaller

    What should I do? It seems that he reads the data in the memory and it doesn't have enough space for it. When I read the data I want to write to a file.

    Read it in pieces. Write each piece to the file, and then repeat with the next segment. Try to read and process all data in one shot is not very practical and you found out will not work.

  • ID package already in use, an error has occurred during the recording of output ' 1.1.0"to the database.

    Hello

    I currently have an application called "Apa Doanya' (id 33020976) for BB 7 and below. Now, I created another version of it for BB10. To publish this version BB10, I created a new application named also "Apa Doanya' (id 46317888), download the file bar, but not yet to introduce the new application for review. Later, I changed my mind, I want to release this BB10 version under the name of my current application so that I can keep the sides and the current download figures. So in my application, I added a new version, download the folder bar and increment the version 1.1.0. But I got an error when recording on step 5, he said:

    Package already in use ID
    An error has occurred during the recording of output ' 1.1.0"to the database.

    I tried several times but no luck. What has caused this? Is - it because I already download the bar file to another application (id 46317888)? Just to be sure, I remove bar app 46317888 file and download a dummy cod file (so that the application can be saved). Then repeat the previous step (add a new version and so on) but I still have the same error.

    Really appreciate any help.

    -Hammemi - D

    Hi erik,
    Thanks for reminding me

    Yes, the problem is now RESOLVED. It was, I think, a bug/error on their part (support of the seller) so they erased the package id (I quote: "the package ID has been deleted.").

    Thank you very much :-)

  • Use of the database.

    Hello friends,

    I use a static database in my application.

    I don't have to create the database.

    I have a database that I put in my code and use it from there.

    So it is possible to do the same thing or should I create in SD card?

    I don't want to create database.

    Kind regards

    Unfortunately, SQLite works only from a database on a SD card or the "internal memory".  It does no memory on the device, or an asset provided with the application.  I'm sorry.

  • What is better to use the database or persistence.

    Hello friends,

    I have a doubt in relation to the use of the database and persistence.

    I'm working on an application based on OS_v5.0, I use a database to store my data or persistence.

    While it will be better to use as prospect of memory and speed.

    Thank you

    There is no right answer here.  Include critical factors

    (a) the data structure - is that he opposes or ranks

    (b) the size of the data,

    (c) how the data should be used

    (d) what coding effort, you are willing to put in.

    You must weigh all these factors before making a decision.

    Maybe you can give some pointers in each of these areas and we can suggest how we were?

Maybe you are looking for