Form factor of the Arduino R3 on FRDM-K64F pins available

Hello

I just got my board FRDM-K64F and I would like to add some sensors to it to test it. I read that the Board has a form factor of the Arduino R3™ pins available and I don't know what it means when I buy sensors (i2C, SPI, UART interfaces) to this Council. I understand that I can just connect any sensor with cables and a model but I thought perhaps this provision of the Arduino R3 pins is something that makes it easier?

As you probably can see, my skills of HW a little bragging...

Thank you very much

Andy

Hi Andy,.

It's GPRS Shield V2.0 - Wiki.

Tags: Java

Similar Questions

  • Form factor of the graphics cards that work with the Dell Optiplex 760 desktop computer?

    Hello

    So I recently got this Dell OptiPlex 760 desktop form factor that I really like and I would get a video card for it.

    It's the desktop form factor. The second largest next to the mini tower. There a 240W (or 250?) food I don't want to change. I would like a GPU that works with a supply of 240 w.

    I wish it were less than 60 dollars. I do some light games (Minecraft) and want to join a substantial amount of FPS with this game. Suggestions of the card?

    I'll give you more information.

    It fits into all THE MODELS except the USFF because USFF has no slots.  You will need to remove the flange size and use the version of low profile.

    cs_setInnerHtml ('video_9366bb5b-9fda-4cca-bfea-c4ec470df1e3', ");

    Maximum power allowed is 25W on low profile units.

    It is also why they Print 25W max on the 16 X video slot.

    Radeon HD 2400 XT 25 W TDP

    Here are valid Dell Low Profile PCI - e 16 X for this chassis - video cards

    XX347 ATI Radeon HD2400 Pro 256 MB, DVI - I, TV out
    YP477 ATI Radeon HD2400 Pro 256 MB, DVI - I, TV out
    CP309 ATI Radeon HD2400 XT, 256 MB, DMS-59, TV out
    XX355 ATI Radeon HD2400 XT, 256 MB, DMS-59, TV out

    cs_setInnerHtml ('video_af6d7d61-a142-4402-9efd-b4abb192eca2', ");

  • Form factor of the Board mother OptiPlex 790 DT?

    Hello

    What is the form factor of the motherboard used in Optiplex 790 (DT)?

    Can I use a card mother microATX? It to be precise.

    THX.

    It is mATX, but you may need mode to your own panel connector before (switch, power, light etc.).

  • H330 form factor for the PSU

    Hallo!

    Can someone tell me what form factor POWER H330 block uses? It seems to be pretty close to a TFX but each TFX PSU I found a screw holes in different places on my desk. Is this the case?

    Just the ususal request on here it seems related to an update of the graphics card!

    Thank you very much

    Barry

    Hi PaddyPuter,

    Welcome to the Forums.

    Looking for spare parts, the Ideacentre H330 uses the following PSU:

    PS-FSP180-50NPL 110/220V/NO PFC

    PS 400WATTS PC9029-EL0G 110/220V 250W

    PS PSE 180-50NPL 110/220V/NO PFC

    PSU form factor resembles a Flex ATX.

    Concerning

  • HP Compaq dc5800 small form factor or the internal speakers -?

    The HP Compaq dc5800 compact there speaker internal (s) in the box of the computer?

    I've only been able to get sound by connecting to the audio port with a speaker or a monitor.

    If she has internal speakers, I will ask the Linux Board why it doesn't.

    Hello:

    According to page 14 of the quickspecs below, it does.

    http://WWW8.HP.com/h20195/v2/GetDocument.aspx?DocName=c04290830

    All of my dc7xxx/80xx PC Elite have always had an internal speaker.

    See page 5 for a list of the HP items indicates are not supported under Linux.

    Do not forget that this info was from October 28, 2009, and perhaps things have changed about the backward compatibility of Linux info.

  • The ThinkStation S30 Motherboard front connector pins available

    Looking for available connector Front panel on thinkstation S30 pins

    Motherboard is an Intel with a LGA 2011-0 CPU socket. (Socrates - rev1.0)

    Any info would be great

    Thks

    Howie01

    Should be a heading 11 pins.

    Pin 1 = unused LED +.

    Pin 2 = + 5v

    Pin 3 = unused LED +.

    PIN 4 = unused LED-

    PIN 5 switch = +.

    PIN 6 = switch-

    PIN 7 = HDD LED-

    PIN 8 = Power LED-

    PIN 9 = HDD LED +.

    Pin 10 = Power LED +.

    PIN 11 = mass

  • I want to buy the usb 3.0 card and the wi - fi card for Pavilion Slimline s3760 form factor

    Please help me to locate the internal usb 3.0 card and the card WiFi for Pavilion slimline s3760. There been no wi - fi internal catd and usb 2.0 when I bought in 2009.  It is a small form factor of the cabinet, and so the cards normal donot enter. Also, will there be enough slots for the latter.

    Sorry for all the posts! Take a look at this one:

    http://www.Amazon.com/Koutech-SuperSpeed-adapter-low-profile-brackets/DP/B005FM8P3W/ref=sr_1_12?ie=UTF8&QID=1342556028&SR=8-12&keywords=low+profile+PCI+USB

    Here, it's to Koutech:

    http://www.koutech.com/prodDetail.asp?LineNumber=525

  • Envy DV7: What size/form factor hard drive is in my laptop?

    Good evening.

    Well, my desire for two year, died the other day care of overheating the chronic problems that seem struck Envys at this time. My block of cooling died beforehand, that was probably the cause of the rise in temperature. Yep, that burning smell of rubber from the exhaust vents was kind of present that something was wrong, as well as the characters of ding strange wing that the display has been put in place and the intense heat of the keyboard who suddenly developed. Unfortunately, it was out of warranty. I really liked this PC, too.

    In any case, I would remove the hard disk that is inside to retrieve the data using an external hard drive enclosure but I need to know what size or form factor of the hard drive is to buy the appropriate forum. I guess it's a 2.5-inch form factor. Is this correct?

    Thank you very much

    Bob

    Yes, it is 2.5 inches. You can just buy SATA TO USB adapter:

    http://m.eBay.com/ITM/Anker-USB-3-0-to-SATA-3ft-converter-adapter-cable-for-2-5-3-5-inch-HDD-and-SSD-/221203585457

    Concerning

    Visruth

  • HP Compaq 6300 small form: deliver the installation of an operating system for HP Compaq Small Form Factor 6300

    I have a HP Compaq 6300 Small Form Factor in which I just replaced the motherboad. It works very well. I can start on a USB bootable and (1) start a Windows 8 or a clean installation of Windows 10. I can (2). boot from a USB drive capable of Linux Mint 17.3 Startup and load that OS fine. When I try the installation of any of the aforementioned OSs (Windows 8/10-Linux Mint 17) they all will get an error of memory or hard drive and the installation at the beginning of the installation to fail. I tried this on two SSD drives and two HDs standard. I am at a loss on what to try next. Any help would be great. Thank you. -Matt

    I have it. It was a bad memory stick.

  • HP Compaq dc7800p small form f: the upgrade of system model HP Compaq dc7800p Small Form Factor

    Right, I'm wanting to upgrade my ram and graphics card, but I am struggling to understand what I put in and what I can't. I also wouldn't mind research in a new soul who currently use a vpro intel Intel (r) Core (TM) 2 Duo CPU E6750 @ 2.66 GHz, 2660 Mhz. I just want to eventually play some games, but nothing heavy and do some light video editing again once nothing to heavy. Any help would be amazing.

    Here is the complete information of the system:

    Name of the Microsoft® Windows Vista™ operating system business
    Version 6.0.6002 Service Pack 2 Build 6002
    Another Description of the OS is not available
    Manufacturer of operating system Microsoft Corporation
    USER-computer name
    System manufacturer Hewlett-Packard
    Model HP Compaq dc7800p Small Form Factor system
    System Type X 86-based PC
    Processor Intel (r) Core (TM) 2 Duo CPU E6750 @ 2.66 GHz, 2660 Mhz, 2 Lossnay, 2 logical processors
    BIOS Version/Date Hewlett-Packard 786F1 v01.27, 11/04/2008

    I would also like to pass well ten Windows. Thank you

    Hello:

    For a video card, I recommend the AMD Radeon HD 6450 half-height card, which works perfectly with the 240W power supply in your PC.

    Make sure that you get one that includes low profile brackets in the area.

    Memory... you can install a maximum of 4 x 2 GB memory PC2-6400 for your model if you are running a 64-bit operating system.

    I have used this brand in my dc7800 CMT.  I bought 2 games and maxed out.

    http://www.Newegg.com/product/product.aspx?item=N82E16820231207

    Processors... Mine came with the E8300, so I didn't change that.

    Here is the link to the quickspecs for your PC.  You can find taken processors supported on page 9.

    http://WWW8.HP.com/h20195/v2/GetPDF.aspx/c04287277.PDF

  • HP Compaq 8200 Elite - XL510AV: need help to find the form factor small PCI Ethernet card

    Hi guys, I hope one of you can help me with this. I need a card PCI Ethernet single port for a HP Compaq 8200 Elite Small Form Factor computer.

    From what I see, the motherboard has a PCIe and two PCI card slots.

    Computer model is XL510AV

    Any help is appreciated.

    Hello

    The following can help:

    http://www.StarTech.com/au/networking-IO/adapter-cards/10100-1000-Mbps-32-bit-PCI-Gigabit-Ethernet-card~ST1000BT32

    It has 2 brackets for standard and one for the low profile, you can swap around.

    Kind regards.

  • Pavilion Touchsmart all-in-One: how to install the SSD in Touchsmart F234? What form factor is necessary?

    Will be HP 20-f234 enhancement by replacing the HDD with SSD.  Two questions:

    1. is there a video (or even a set of complete step by step instructions would be) Bay of any place that illustrates how to get the HARD disk inside?  (Remove screws, etc.)

    2. what form factor SSD is supported?  That is, will I need an adapter of some sort support if I have a 2.5 SSD "?

    Thank you.

    Seems to be a 3.5 "desktop drive

    How to replace the hard drive

    http://support.HP.com/us-en/product/HP-Pavilion-20-all-in-one-desktop-PC-series/5359028/model/5365334/document/c03690508/

    Your support page

    http://support.HP.com/us-en/product/HP-Pavilion-TouchSmart-20-F200-all-in-one-desktop-PC-series/5359028/model/5365334/how-to

  • dc5800 Small Form Factor: dc5800 closes during the night or during the day

    My dc5800 Small Form Factor has been stop under its own when not in use, for example during the day or night. When I restart, I get the black screen where it asks if I want to start normally or in safe mode. After startup, it asks if I want to find a solution to the problem (which does not return anything). It never happened while I use the computer. He did periodically, but lately, it's every day. Help?

    Solved the problem by changing some power settings. for example the definition of disk hard do not stop, pc to never sleep, etc.

    You don't know if it's a good thing or not, but the computer turns off when I'm not using it.

  • HP dc7800 small form factor: the GPU UPGRADE

    Hello Sir,

    My motherboard will be support nvidia gtx 660 if I upgrade my power supply 500w or 600w. and I have core 2 quad q9550 processor.

    Small form factor PC is poor candidates for upgrades.

    They are PC entry level designed and produced to run software on corporate networks office productivity.

    A power supply for a Mini PC upgrade won't be over 240 Watts as far as I know.

    There has been a lot of people who are looking to save money by buying a small form factor PC entry and believe they can be upgraded as a PC game.  It's just not really practical. You may be able to upgrade the video card that can run games modern, but adding that a video card beasty and just food will not happen.

    Read through some of the threads where many people try in vain to upgrade their PCs. If you want a gaming machine, it is better to buy one or make one yourself.

    https://www.google.nl/search?q=HP+smal+form+factor+PSU+upgrades&oq=HP+smal+form+factor+PSU+upgrades&aqs=chrome..69i57j69i64.9671j0j4&sourceid=chrome&es_sm=93&ie=UTF-8#q=HP+SFF+PSU++and+video+card+upgrades

  • Affordable graphics for dc 5800 sff small form factor?

    My PC is dc 5800 sff small footprint with Core 2 Duo 3.0 GHz, 4 GB of RAM. Now it runs with Intel Graphic Media Accelerator 256 MB. I find it difficult to play games (like Pro Evolution Soccer 2015) in full resolution. I'm doing research on many types of video cards, but it seems impossible because of their diversity. Affordable graphics for dc 5800 sff small form factor?

    I've seen a few posts on the forum that says HD 6450 1 GB HP is correct; However, I would like to make 'extra' room 1 GB for the future. And I had Msi Hd 6450 2 GB and Asus Gt 630 2 Gb(GT630-SL-2GD3-L) on the spirit, but do not know if it will market voluntarily on my PC.

    Can you help me and suggestions are appreciated?

    Thank you.

    Hello:

    Food's owner, which means that you can use only one.

    This means that you need to customize a graphics card to work with the existing configuration.

    The GT 610 or HD 6450 should work within the limits of the 240W power that has your PC.

    Each card must be much better than the card integrated Intel.

Maybe you are looking for