Format change in the program monitor

Similar Questions

• The program monitor recovering at the center when changing sequences

  I picked my level of zoom to 200% for a nested sequence and discovers the top left in the program monitor to work with the media.

  When I go to the nested sequence in the tab adjacent timeline, I also chose my 200% zoom level and the position of the monitor program sliding towards the top left.

  When I tab back to my first sequence, my monitor of the program, always set at 200%, restores the centre, and I have to drag my monitor of the program towards the top left.

  When I return to the nested sequence tab, drag the program to the top left monitor.

  Is there a way to keep my monitor to reset the program back to its central position?

  I think you're stuck to readjust on this one.

• Export lack contrast compared to the program monitor

  First of all; I'm running on Windows 10 first CC 2015.1 and using a GPU Nvidia GeForce Ti GTX750. I use Dell U2412M twins IPS monitors that are calibrated using a Spyder4Pro.

  Any codec I export to it always seems to be the same discrepancy between what displays the program monitor (as well as the preview to export) and video after export. I used VLC, the native Windows! 0 Reader (film & TV), Quicktime and HTML5. I have all these images will appear less saturated and lacking in contrast. Play exported images on an other machine parts, even relatively faded image.

  I've been reading a lot of posts on this topic, seems to be a common problem, and try to find a solution that works, none of the suggestions I've read have solved the problem in my case.

  • I checked the settings in the Nvidia Control Panel, everything is configured to use the Nvidia settings. Returning to the video player settings makes it even more flat.
  • The only one who came close it is make some additional adjustments when exporting via the effects tab. However, it's something drastic workaround with the overcompensated preview.
  • It isn't just Quicktime that has this issue, it is in all areas.

  Y at - it a setting I have not spotted, either during the export process, or to set the display within the first I missed which would give me a parity between the preview that displays the monitor program and exit? This seems a little silly that the Visual tool used when the color correction and classification of images seems to be a rule in its own right...

  Below screenshot shows the same part of a few images, VLC on the left and the program within the first right monitor.

  

  Thanks in advance for any idea on this issue.

  After a little experimentation this morning, I think I can find the answer. I use some Look of Tom Antos LUTs as part of my process of dimming on my current project. Without these elements in the equation for the difference between the program monitor and images exported in VLC is almost the same makes no difference.

  It is interesting export a file from .cube since Lumetri color Panel with everything Tom Antos LUT applied and then using this file in the ranking. .cube seems to cure the problem. There must be either something wrong with the formatting of the original Tom Antos LUT where changes to the image have been applied in the program monitor but were then omitted in the rendering process. Tom Antos READ appeared in or an earlier version of the first, and there is a kind of incompatibility. Anyway, to re-record the LUT as a native first CC 2015.1 .cube file seems to fix the problem.

  I take this opportunity to thank R Neil Haugen and J. Simon for their valuable input

  I hope that don't cross is not all 'line in the sand' marking my own answer to my original question as the answer...

• The program Monitor stops the video play list

  Hello

  I lose the composite image of video playback in the program monitor and the Source monitor after a few minutes. Audio is not yet.

  While the video plays, a random video color video screens near bar overall top 10 lines of pixels from the left edge to the right edge, then the video freezes on video, but you can still listen to. After awhile, an error message appears and the first to be forced closed. "NVIDIA OpenGL driver detected a problem with the display driver and can not continue." Error code: 3'

  It happens on all projects ranging from different resolutions and sizs from 30 seconds to 40 minutes. I suspect it has something to do with this error of the video and pilots communicate do not, but something causes of creation to arrive after the clip, played some time to display. I tried a few online solutions, others have had success with, but it doesn't have a lot of solutions fully documented for Windows users.

  This put all my projects on hold. Any ideas on how to solve this problem?

  Other clues:

  able to see reading through the other display modes such as waveform, vectorscope or rc

  be able to see the video images to change if manually move the playhead to blue

  Windows Media Player plays video files very well

  Closing the first to reopen the first time very well for a few minutes

  -----

  APPLICATION SETTINGS-

  Adobe Premiere Pro CS 5.5 (5.5.2)

  "Scratch disks": using separate SATA HDD

  Player settings: default player - adobe reader

  playback settings-

  The TV format conversion: software

  play and pause resolution: 1/2

  Displays the first field

  Project example settings-

  sequence parameters: pixel square AVCHD 1080i, 1920 x 1080 16:9 30 fps offset

  Video: I-Frame only MPEG

  Codec: MPEG I-Frame

  Frame rate: 29.97

  DETAILS OF THE SYSTEM-

  OS: Windows 7 Pro 64-bit

  RAM: 12.0 GB

  Memory RAM used (Task Manager): 3.8 GB/12

  Desktop theme: classic Windows (disabled aero)

  Intel Core i7 920 2.67GHz

  NVidia Quadro FX 3800, 1 GB GDDR3, pilot: 9.18.13.697

  3D disabled, allow material dealing with disabled, software to manage color settings, 60 Hz

  Screen: Asus VG278 native 1920 x 1080, using 60 Hz

  Display driver: generic PnP monitor (there is no real drivers for this monitor from the MFG)

  Card motherboard BIOS: no integrated graphics chip

  UPDATE:

  A day later, Nvidia released a new driver updated 03/05/2013.

  I now get a success rate of 100% of the program monitor reading, even on projects that had a few preliminary questions.

  Clean the pilot installation option / default settings

  Version of the driver (from NVidia Control Panel): 320,00 (03/05/2013)

  Version of the driver (from maps Windows display properties): 9.18.13.2000 4/18/2013

  That will do it!

• First CC - the program monitor goes black after a few minutes

  Hello

  
  I have the following problem:
  After 5-10 minutes, the program first DC monitor (2015) becomes black. The sequence and any remains intact, I can still do everything, but it does not show on the program monitor. When I restart first nothing is deleted or changed in any way that I myself.

  Technical information:
  I use Windows 8.1, 12 GB of RAM on 2 TB of free space on my hard drive and an Nvidia GeForce GTX 650.

  I would be very happy if anyone of you could help me with this problem because it's really in the way of my workflow to restart every few minutes.

  -Clara

  Thanks for all the help, but fortunately, the problem disappeared after the new update and I hope it stays like that.

• The program monitor randomly goes black

  First Pro CC uses for months and no problem.  All of a sudden, the program monitor goes black, then back over video transitions between clips, then goes black again.

  I have a HP workstation, with a processor of xenon 12-core, 32 GB RAM, 9 TB of disk storage hard (the first 1 TB flash), blazing fast dedicated with a ton of video memory video card.  It's worked wonders for 12 months and with all the other products Adobe (Photoshop, Lightroom) and hundreds of other programs.  I have NOT changed any video card or video processing settings.   I don't have a hardware problem - it is a problem with Adobe first Pro CC.

  I spent the maximum money on the hardware and the software more later/better (even though I hate paying a subscription for software).  And now this...   Moreover, I understand now and still not a bug, but when the screen goes black in a video software - well, it's like losing your direction while on the highway - it's sort of IMPORTANT - wouldn't you say Adobe?

  I'll scream at Adobe on Monday, but have a serious work that must be done this weekend.

  Is there any help that works?

  You use the latest versions (which numbers?) of Adobe CC?

  Try resetting the workspace.

  Try to update or restore your video driver.

  Try to remove the media cache files.

  Try resetting preferences.

• First CC 2015 - the program monitor turns black under a lot of effects

  So I worked on a video rather strongly. But it looks like a first or my GPU can not handle the amount of effects and layers because the program monitor keeps going black. Only solution is to restart the program, but if I change something or you move the timeline bar thing it just goes black again. Now she even at start up sometimes and it's really hard and boring editting. After he did this export is also impossible, it will give an error.

  I use Windows 7 and my GPU as a GTX750.

  I found a similar question on the forums but couldn't find anything useful. Is this a bug in the program?

  Run the types of effects that you use on this system as described, I'm not at all surprised that you get the results that you are. When the program "suffocates" past a certain point, it becomes totally wonky like that. How each of us "think that" this should work and how it does in reality are not necessarily related. I suggest to go to the Page of the Tweaker, where they made of actual testing of the systems in operation for years with Adobe video software, and look through their equipment.

  http://ppbm7.com/index.php/tweakers-page

  Neil

• I can't get the subtitles to appear on the program monitor

  Hello

  I watched a lot of videos and used several Adobe Tutorials but I can't see my subtitles on the monitor of the program (the monitor in the upper right corner.  This is called the correct program monitor?).  I created the CC from scratch and that they are correctly placed on the timeline.

  Help, please!

  Thank you!

  the default caption closed in the project bin is a type and another type is the default caption closed in the program monitor.

  for subtitling the show, is the type of closed captioning.

  Sorry I can't be specific, if I leave things in the memory will be too confused - I'm just failing to launch the first at this time to specify exactly, but match your closed captioning (change the type of monitor to show)

• Why my subtitles appear in the program monitor?

  Howdy!

  I'm doing some captions, body CC 2015, horrible on a video with an audio track.  I created the subtitle file, turn on the display of the legend on the program monitor and made sure legends I created (just a little far) are activated without a doubt too.  When I saw the legends in the monitor, I exported just the section captioned a. MOV file, with embedded captions once and once with them "engraved" on the video.  The subtitles are displayed, even if they are a bit of a mess (spaces, etc.), so I know that the first known legends.  So... why they do not appear in the program monitor?

  Any help appreciated!

  (- Jim 8 ^)

  Looks like that the first default - folder > new > legends > video settings > new legends

  default values for the Standard CEA-608

  and the program, the default monitor - key > legends display > settings > CEA-708 Standard

  Thus, with the legend, the program monitor's two default settings does not appear

  for me to have the subtitles to display in the program monitor, I had to 'match' standards of legend

  but, what happened to change the font size? Are you able to do? I thought I read in the legend help first, this type of policy, the size, was editable, so am I missing something?

• Problems with the program monitor for 20 to 90 seconds with project started in first CC2014 using CC2015

  I'm just finishing an important project for first Pro CC2015 and it tests my patience. Whenever I do an edit simple ripple and transitions program window to view side-by-side, CC2015 PP becomes somewhat insensitive for anywhere between 20 and 90 seconds. Sometimes it does not recover at all. When I say it's a bit insensitive, I mean I can always move clips, remove clips, or manipulate the clips in any way I want on the timeline. But the program monitor just sits on that same side-by-side view. The side-by-side never displayed the images while ripple editing is performed. The source window, audio mixer and lumetri litters all stop working. But they recover before the window of the program.

  This project was launched in 2014 CC and we should never have improved while in the middle of this project, but now it's too late to go back. It does this on two PCs at work and my PC at home. I started a new project, and no problem with changes to the ripple. Although there are minor, other performance issues, more generally I'm not happy about this day with first CC 2015. I also found a CC2014 project that will not export the correct proportions using CC2015, but just, we returned to the 2014 project to continue working on it.

  Number for ripple editing, eventually everything comes back and still works, but only once so far. Only once, however, my PC completely frozen and had to be returned. I built this PC at hand and never charge anything on what I have needed for my work. This is the first time that this PC has frozen more than 3 years that I used it. Sometimes, a program crashes, but never the entire system.

  Did anyone else out there having this problem?

  MY ADVICE: Finish the projects of CC2014 on CC2014! Stick with new projects with CC2015. or just hold off on upgrading.

  Hi Lisa,

  Disable "Composite overview for Trim" in the timeline view settings and see if that helps to run.

  

  Your Advisor not to switch versions of the programs in the middle of a project is the RIGHT HAND RULE of THUMB of video editing. + 1 for your advice.

  Thank you

  Regalo

• EN: Selection/direct manipulation of clips in the program monitor

  If you accept this workflow improved, please add your own voice here www.adobe.com/go/wish.

  Improvement / FMR. *

  Short title of your desired function: direct selection of clips in the program for the change monitor

  How would you like the feature works?

  We should be able to directly monitor select a clip/active in moving/resizing/rotation program.  Even better would be the ability to SHIFT-click-select 2 or more items to move/scale/rotate them in tandem.

  Why is this feature important for you?

  The current workflow is convoluted/intuitive because it forces users to: 1) select a single element of amendment under the ICT in the scenario, 2) click on 'Motion' in the effect control window. (3) make the changes of the Motion to the ECW and/or the program monitor. (4) repeat steps 1 to 3 for all clips/additional titles in the program monitor that had to be changed in tandem.

  Although this feature request may require implementation of the 2 step, first of all, allowing direct selection of a single item and later allowing manipulation of selection/movement of 2 or more items at the same time, allowing one to select it directly in the monitor of the program for now would be a major step forward by finally allowing to change the attributes of the Motion 2 or several seeds at the same time.

  NOTE: For live clip selection work efficiently, including "selectable" of securities would need to be automatically limited to the dimensions of the text itself and not by default to the dimensions of the video settings as is currently the case, because otherwise, it would be impossible to directly select a clip in a title to equal video dimensions.

  2) click 'Motion' in the effect control window.

  Top tether can be selected by double clicking in the MP.

  If the undelaying clip is visuable and falling outside the bounding box of the element to overprint (in pips) you can double-click this also in the MP to get the rectangle encompassing.

• View of ExternalMonitor of the 'monitor Source' to "The program monitor" switch?

  It worked well in CS6, but I went to first CC and my external monitor is displayed the contents of the 'monitor Source' of first only, not "the program monitor. When the monitor of the timeline or program is selected, the extrenal monitor is black. But slecting monitor Source plays very well on the moitor extrenal (via SDI connection)

  How to switch to display the signal from the program monitor my external monitor rather than the Source monitor?

  Configuration of the Tech: using Blackmagic ultrastudio mini monitor to send the SDI signal. Installing the latest driver for the Blackmagic ultrastudio, approved for Adobe CC everything works perfectly in first CS6, it is a question within the first CC.

  Thank you!

  Change the fields option in the settings of the sequence to 'No fields (progressive scan)' fixed.

  Thank you!!!

• The program monitor shows nothing

  I just got CC and started to edit a project that I had initially started on another computer in the trial CS6.

  Open the project, he has converted format CC, find the files and everything. When I preview the it, the program monitor shows black, but audio parts. I tried with a new project and add a few titles and still nothing in the program monitor. When I exported the media, he appeared correctly, but forecasts were black.

  No idea how I could fix this? After Effects displays previews very well, QuickTime seems to work without problems, and I'm a little lost.

  EDIT: Checked the file Adobe Premiere Pro preview files: there is a file called Untitled.PRV (my project is untitled) which is empty. Shouldn't there be something in there?

  Running on a new computer, 8 GB of RAM, i7-3630QM 2.4 GHz, 2 x GeForce GT650M, etc. I don't think the specs are the cause.

  Thanks for this tip. Read all over the web; It turns out that the codec packs is bad (I didn't) and decided to uninstall those that I donwloaded. First is always present, so it was definitely a driver problem.

• During the insert, the program monitor does not display the adjacent images

  On page 207 of the manual, it says:

  The program monitor can help you determine where to place a clip you add to a sequence. During a change of crush it, it displays the images

  in the adjacent sequence for the new clip head and tail. During a montage of the insert, it displays the adjacent images at the insertion point.

  When I drag a clip in the project Panel in a sequence, everything works as indicated in the manual. And when I drag the same clip with the program monitor, everything works still fine - but I don't see any adjacent items displayed. How to view?

  This works when you drag the movie, not the program monitor.

• CS5, no Audio output of the Source monitor, but output OK for the program monitor

  Hi all

  Any thoughts on why audio output would be audible during playback in a timeline/program monitor, but the same clip doesn't produce audio output when loading in the source monitor? In the body of CS5.

  I checked the preference settings and everything seems to be fine there.  We have just added a set of external speakers to this workstation and those are the audio devices in the program monitor.  When a clip is read in the Source monitor, speakers produce a nice low hum, but the sound of the clip is missing.  The buzz that crosses leads me to believe the audio hardware is mapped and set correctly, but maybe not?

  Thanks for your thoughts?

  LIndsay

  My apologies for the lack of detail... I know better than that.  Luckily I thought about it the problem.

  The clip is Ikegami MXF.  The problem was that the first audio channel didn't have any audio recorded to it.  I changed the properties audio clip and disabled channel 1. Voila! The clip was loaded in the source monitor and the sound became audible.

  I found the inspiration for the fix in this thread: http://forums.adobe.com/message/4324033#4324033

  Thanks for the research!

  Lindsay