Formatting and recovery of Windows installation on Satellite M60

Similar Questions

• ProBook G1 430: Encrypted hard drive and the corrupt Windows Installation

  My laptop has an encrypted disc using HP drive encryption.  Recently, the Windows installation has become corrupted and I could not repair the installation using floppy disks to install Windows because they cannot access the encrypted drive, nor can they be accessed by other facilities of Windows if I plug in the external drive.  The two methods see the Windows partition as a RAW format.  I guess it's only because the partition is encrypted and has no way to determine the actual format type.

  I searched around to find clues as to how I could get past the encryption, but without success.  The computer is no longer under warranty, so I'm looking for options that will allow me to have access to the data.  The methods I've read all required the computer under warranty.

  I can still go through the encryption after the computer starts, but Windows Setup gives an error and tells me that I must use an installation disk to fix.  I have attached a picture of the screen of the error.

  I'd appreciate any help anyone could provide to solve this problem.

  After much patience and time on the phone with HP, I finally able to return the encrypted Windows installation.  They gave me a copy of the WinPE environment was a software that allows you to decrypt a partition which was encrypted with their software and execute commands Windows on it.  I then ran the repair bootbcd order and I was able to get Windows to start.  To obtain this software, my case should be escalated to tier 2 support.

• Viewer for documents and pop-up Windows Installer.

  I would like to help, I have no problem on the Internet and you want the problem I have is: every time I click on the TW 08 game I get a Windows Installer and viewer of documents pop up and I'm not allowed in the game TW can you help me.

  Hello
  You try to play online?

  If Yes, then you can try to run IE in mode without modules.
  http://Windows.Microsoft.com/en-us/Windows7/Internet-Explorer-Add-ons-frequently-asked-questions

  If this isn't the case, then you can try to clean boot.
  http://support.Microsoft.com/kb/929135

  Jackson

• Repair system and recovery for Windows XP

  Windows XP > system repair and recovery

  June 25,2010, to increase my internet speed high speed, my grandson changes made, removing and adding things. I tried to repair and recover the changes, but were unable to. Recover was unable to recover. I'm unable to open all the files, they can be found. Have I not options to recover my XP for the date, he incredibly did these changes?

  Be gentle, old... and try to learn

  Well, what he was doing was passed me to google Chrome, which, said, has increased the speed of the internet (he said it was slow) it then apparently deleted some of my Windows programs. He said some Windows updates were too old and I no longer need. I tried to go back to June 24 to get things deleted, but recovery has given me a different date of July 13 and would not allow the date 24. On the recovery screen, programs that have been deleted on June 25 have been identified, which is how do I know that it was deleted.

• Manager backup and recovery in Windows 8

  I tried to create recovery disks in the Backup and Recovery Manager.  The software would only make the first disk and then hang up.  All the other empty disks inserted appear as complete. I'm trying to burn DVD + R discs.  The backup application was updated to the latest version.

  Contacted Dell technical support.  Initially, the representative did not know what Backup and Recovery Manager is or did until I showed it to him on a remote connection.  He claims that it is a Microsoft problem, even if it is the Dell software.  Representative said that since Microsoft has no burning software disk in Windows 8, the Recovery Manager will be properly burn discs. (I could do the backup on a USB key).

  Microsoft contacted; they began to laugh because he comes to Dell software, but helped me to look at it any way.  After 2 hours of watching the software does not work, the rep told me to call Dell again.  He said that I need to download and reinstall the software.

  Of course, software release not correctly the player after that burned the first disc and shows then all the following discs as being full.  When the second disc is inserted, it is read as not having not any space and then is ejected.

  I could not complete the backup process by using a recorder external panasonic. So it seems there is nothing wrong with the software and may be a hardware problem.

• I try to install or uninstall programs, but a message appears and says "the Windows Installer service is not to be accessible" GOLD that the system administrator has set policies to prevent this installation

  Several times I tried to install itunes but a message pops up saying

  • Windows install is not properly installed and

  I also try to uninstall programs and whenever it says the system administrator has set policies to prevent this installation, but I've changed my settings so that I can be the administrator

  • the windows service install could not be accessed
  Hello
   
  You may encounter this error message when the Windows Installer files on the system are missing or damaged.
  You can resolve the error by using the methods mentioned below:
   
  Method 1: Start the Windows Installer service
   
  a. Click Start, type "Services.msc" and press {ENTER}
  b. double-click Windows Installer
  c. the value of the Windows Installer Manual startup type
  d. Click Start to start the service. Note the error message, if any.
  e. click OK.
   
  Method 2: Unsubscribe and re - register the Windows Installer
   
  a. Click Start, click Run, type "MSIEXEC /Unregister." and then click OK. Even if you do it right, it may seem that nothing is happening.
  b. Click Start, run, type "MSIEXEC/REGSERVER" and then click OK. Even if you do it right, it may seem that nothing happens, or you can briefly see an hourglass.
  After you run this command, the operation is complete.
  c. try your application based on Windows Installer again.
   
  Method 3: Scan SFC
   
  Perform a scan of the SFC to check if this is related to the missing or corrupt file system.
   
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• WebCenter and UCM on Windows installation

  I have a small question about the good installation sequence for portal WebCenter and UCM on Windows XP. The goal is to use the AAU of WebCenter repository via a socket Oracle Content Server connection.
  
  During the installation of the WebCenter on Windows I don't see a command prompt to install Complutense University of MADRID. This means that I have to install the Complutense University of MADRID, with the installation of the AAU program? I tried that before and for some reason it does not - I couldn't see everything new WebLogic servers created. When I tried to start the WebCenter managed servers I got an error that installer64.exe is not a valid Windows32 application. What AAU weblogic server is supposed to work on?
  
  Can you give me some advice on the correct installation of the UCM? I intend to access the content of the AAU of WebCenter portal, so it is possible to skip the installation of the web server? I would like the more compact, the installation option faster because it was such a WebCenter training workshop.
  
  Thank you
  Igor Mameshin

  First of all, it seems that you run a 64-bit installation program on your 32-bit windows computer. This is why it does not work.

  University Complutense of MADRID must be installed separately of the WebCenter. PS2 you could do it at the same time, but now, you need to install sepperatly. First install WebCenter, you install UCM. When you install the AAU in the same directory of fusion middleware, you can create a domain with webcenter and UCM. When you do so, you will have two servers managed to webcenter and UCM.

  UCM is now fully integrated in the weblogic domain. You do not need to install two weblogic, you can use the one you have installed for webcenter.

  When you run the RCU to WebCenter and you know you are going to install Complutense University of MADRID, you can of course check the components of the Complutense University of MADRID, as well, so you don't need to run it twice.

  If you need help to install WebCenter, you can follow my step by step guide: http://www.yonaweb.be/installing_webcenter_11g_ps3_scratch
  Install the AAU will be a similar process.

• Replace drive hard and error on Windows Installer

  The hard drive on my Dimension 8500 failed. I replaced the drive with a new hard drive, Samsung Spinpoint T Series HD501LF 500 GB 7200 RPM SATA 3.0 Gb/s. I bought a new copy of Windows XP to install the disk that I had lost a long time ago the disks provided with the computer.

  All went well for a while. I entered the BIOS and saw he was grateful the new drive. I started on the Windows installation disc and got through the first step of the process. Then, the installer gave me the error message could not find any hard drives. I went into the BIOS, and it has always recognized the hard drive.

  I seem to be stuck now. Help!

  
  

• Windows Vista on Satellite M60-104

  I need to install Windows Vista RC1 to test the operation of the applications under Vista, and my Satellite M60 is the only PC with a pretty good spec to run it. Are there problems installing Vista on this model?

  Don't know if it will have the same problem as the M40, where there seems to be a conflict with the PCMCIA drivers that keeps him from start. (The unit on the M40 motorway is Texas Instruments PCI-xx21/xx11 CardBus Controller with UltraMedia.) There is a way around this, however.

  With a name like "techpro" maybe it's a bit basic, but:
  You have a complete, tested backup?
  You plan to use it on dual boot?

  On the M40, the installation runs smoothly until the second reboot "Finish Installation" and after that just hangs.

  You must boot from the dvd, choose the line of command/Install/repair/advanced option and rename (or delete) the following files:
  Pcmcia.sys Windows\system32\drivers
  windows\system32\driverstore\filerepository pcmcia.inf_* (numbers here are different on the build 5600/5728).

  Or it may be a different configuration and install and start very happy...

• How to order recovery of product for my Satellite M60 - 104?

  Hello

  I have a portable Satellite M60-104. I want to recovery of product, however, I seem to have lost my product recovery dvd. Is there anyway where I can re - order one for this laptop, or download from internet (if so, where!)

  Thank you

  Sunny

  Hello

  The recovery CD can be ordered from service provider authorized in your country!
  These CDs are very cheap

  If you do not know where or how to contact the ASP, database with ASP worldwide can be found on the Toshiba page!

  http://EU.computers.Toshiba-Europe.com-> support & downloads-> support homepage-> find an authorized service provider

• How to format and re - install Windows 7 using recovery disks/Partitions?

  Hello..

  My product-

  HP DV4-5109tx

  Windows 7 (64-bit)

  I have a free space of 78 GBs that I'm not able to use... As when I try to use the "disk management" and right-click on the free space to "format partition" this option has been grayed out... !!

  Please suggest if I can use this space without formatting? (I was suggested for formatting)

  In addition, due to some other issues too I want to format my Windows (and reinstall) IE drive C so that the free space problem can be solved... Also I don't want no data in my other drives to be formatted...

  I have the recovery partition and the recovery disks sent by HP...

  Please help me how I can use them to solve my goal...

  Thank you

  It's simple, as I suggested in my previous post.

  Once you have a drive like the one on the image management window simply click New Simple Volume. Create a new partition called "New Volume". Make a right click on it and the option to format it will appear.  The strips on the 75,38 GB of free space in your image indicates that the selected action will take place on this point in the disk management window. You can change the name for the new volume in Windows Explorer.

• Lost the disk for recovery of Windows 8 for Satellite C855 1v9

  Hello

  I bought a new laptop (toshiba satellite) 8 original windows pre-installed,
  However, I wanted to repartition my hard drive and without warning I deleted the recovery partition, therefore, the laptop could no longer starts.

  So I asked a professional if he could get my laptop to its original factory condition as it was when I bought it (with 8 pre-installed... original windows) in order to sell it later and he told me that it is impossible since I do not have the recovery disk, and the only way to make it work is by installing windows 7.

  I have lack of knowledge in it staff that's why, I haven't had not to make a copy of a recovery disk.

  Now, as I intend to sell my laptop, I was wondering if there is a possible way to sell me the recovery disk that allow me to back up my laptop to its factory condition (with original windows 8 pre-installed and pre-loaded software of course), and the estimated total costs that I pay.
  PS:

  * My laptop information:

  • * SATELLITE C855-1V9
  • * CORE I5 - 3210M
  • * 2048 MB 1600 MHZ
  • * 500G HDD (5400 RPM) SATA
  • * 39.6 CM TRUBRITE HD LED
  • * DVD-DINNER-MULTI DRIVE
  • * COLOR: LUX WHITE PEARL
  • * BLUETOOTH W - LAN (802.11B/G/N)
  • * WEB CAMERA
  • * MS WINDOWS 8

  I also have: product code, serial number, MAC LAN, WLAN MAC
  Eather way, thank you for your support... looking forward to hearing from you soon

  happydz

  Hello

  Original recovery image, you can order on https://backupmedia.toshiba.eu/landing.aspx
  Using this drive you can install the original recovery image and your laptop will have factory settings again.

  If you have any other questions do not hesitate to ask.

• Pavilion g6: format and reistall system - windows 7

  Should I format my PC, I of course only drive C,
  I have seen that there is a disk D with the programs I believe I serve,
  But how can I do?
  "FORMAT C: / S" is the first step.
  but then?
  installing windows 7 where to find and how the launch? I have on a cd? I've never even had a recovery disk and drivers?
  I'm sorry for my English, thanks, Angel

  perfect, once again as I understand it a little rough translation from google translated...

  When starting up, I press the f11 key until you see a menu from which you can clean your C drive, restore windows 7 'new' without software installed, as when I bought it

  security must make the recovery disks

• HD format and re - install windows vista

  Hello I have an old Vostro 1700 and I would like to format the hd and re-install Vista; However given that this is something really new to me I fear I could make mistakes and get stuck in the middle of the process... In additional wonder if my phone is too old for this.

  I've visited a lot of sites but I'm still not sure about backup and the re-installation of the program and the readers.  For example, I heard that readers must be installed in a certain sequence.

  Is there anyone who can give me a list to follow or maybe a good link?

  Thanks for any help or guidance you can provide! Giancarlo

  I wrote a Windows reinstallation Guide which can be found here:

  http://dellwindowsreinstallationguide.com/

  See a clean installation of Windows Vista

  It will take you through it step by step.

• Bugcheck after format and re install Windows 7 BS Bluescreen

  Nice day

  I formatted my hard drive the other day (31/05/14), since my computer has been crashing with blue screens like crazy - at least two to three times a day. The system is a customized version of the year, and I've updated all my drivers and software. I did my best to try to understand why it keeps crashing, including repair of windows, memory diagnostics, disk hard scans, Mr Fix It, removing overclocks, etc, etc, but I failed. I can say with certainty that the event viewer reports the same codes of each hour. It's as follows:

  The computer was restarted after a bugcheck. The bugcheck was: 0x0000007f (0 x 0x00000000000406f8, 0 x 0000000000000008, 0000000080050033, 0xfffff80002ec3d3d). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 060114-19749-01.

  The specifications of the system are:

  ASUS p8z77-v lk

  Intel Core i5 3570 k (returned to the stock clock, formerly overclocked to 4.5)

  7950 vapor-X (returned to the stock clock, formerly overclocked to 1150, 1500)

  8 GB corsair vengeance

  Hard drive 1 TB seagate (primary)

  HDD 2 TB seagate (for steam games)

  Hitachi 500 GB (used for photos and backups from norton)

  Windows 7 Professional

  As stated above, my drivers are all up to date, just like Windows. Any help would be appreciated.

  Edit: I am now downloading my memory.dmp to Sky Drive. I'll post it once it is completed.

  Edit:

  Memory.dmp

  https://onedrive.live.com/redir?RESID=81FD46DCA3892436%21107

  Information System

  https://onedrive.live.com/redir?RESID=81FD46DCA3892436%21111

  Hello

  The link above is to an empty folder however the memory.dmp and the information system are both
  available from the link below.

  Given that you re-installed Windows leading to this material or something that loads low.
  Don't forget to update the BIOS, chipset of low level driversand major embedded and separate
  separate device drivers.

  Bugcheck 7F, {8, 80050033, 406f8, fffff80002e8ff24}

  ERROR: Module load completed but symbols can be loaded for iaStor.sys
  Probably caused by: iaStor.sys (iaStor + 4b2a)

  Notice the 08 (double fault) as 1st parameter means there are likely two cases involving
  hardware and/or software in any combination.

  iaStor.sys dated driver Intel Rapid Storage Technology 01/02/2012 .

  fffff880 '01025000 fffff880' 013c 9000 iaStor (no symbol)
  Loaded symbol image file: iaStor.sys
  Image path: \SystemRoot\system32\DRIVERS\iaStor.sys
  Image name: iaStor.sys
  Timestamp: Wed Feb 01 16:15:24 2012 (4F29D59C)

  1. check with ASUStek support, their drivers and documentation online and ask in their forums
  on known problems.

  iastor.sys = Intel Matrix Storage Manager driver - see ASUStek and chipset manufacturer. This driver
  may was pushed to the fault by other programs such as Symantec/Norton.

  This driver is extremely difficult to install if you need help of ASUStek, but you could also ask
  in the forums of ASUStek.

  Also check the downloads from Intel after HP drivers.

  Intel downloads
  http://Downloadcenter.Intel.com/

  Intel Matrix Storage Manager - do not forget to check DATE and set for the version of Windows and chipset
  http://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng&keyword=%22matrix+Storage+Manager%22

  More help on installing iastor.sys here (check with HP first and use it as a last resort).

  http://social.technet.Microsoft.com/forums/en-us/itprovistadeployment/thread/98f123d4-9190-4169-A376-7a0caf0ffb2a/

  2. Norton/Symantec and MBAM could be involved in this problem so I uninstall them and run
  removal tools to avoid problems causing remains. Instead, use MSE - free and run TDSSkiller.exe
  search for rootkits.

  Norton Removal Tool
  https://support.Norton.com/SP/en/us/home/current/solutions/kb20080710133834EN_EndUserProfile_en_us?product=home&PVID=f-home&version=1

  List of tools to clean/uninstall anti-malware programs
  http://answers.Microsoft.com/en-us/protect/wiki/MSE-protect_start/list-of-anti-malware-product-removal-tools/2bcb53f7-7ab4-4EF9-ab3a-6aebfa322f75

  Uninstallers (removal tools) for common antivirus software
  http://KB.eset.com/esetkb/index?page=content&ID=SOLN146

  MSE - free
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5201

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  3. also check these:

  Stop error message when you run an application that transfers data using the UDP protocol
  in Windows Server 2008 R2 or in Windows 7: "STOP 0x0000007F"
  http://support.Microsoft.com/kb/981180/

  The General causes of errors "STOP 0x0000007F" (applies to Vista and Windows 7 as well)
  http://support.Microsoft.com/kb/137539

  A search - 0x0000007F
  http://support.Microsoft.com/search/default.aspx?mode=a&query=0x0000007f&SPID=14019&catalog=LCID%3D2057&RES=50

  4 use ALL other methods in the troubleshooters below.

  --------------------------------------------------------------------------------------------------------

  Resolution in Windows 7 stop errors (blue screen) - has a section for if you can or can not start
  Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  BCCode: 7F 0x0000007F which is the same as 0x1000007F<-- read="" this="">
  * 1304.html http://www.faultwire.com/solutions-fatal_error/Run-a-System-diagnostic-Utility-supplied-by-your-0x1000007F-

  References to Vista also apply to Windows 7.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
  be older and cause problems. If updates offers a new driver and then HIDE it (right click on it)
  and then go look for new ones manually if you wish.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ==========================================

  Tests of memory intercept all errors such as memory do not match (possible even for sticks
  seemingly identical) and when the faster memory is placed in system behind the slower memory.
  So it is best to Exchange also glue in and out to check for those, even if all the tests of memory do not respond
  a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For the Windows Memory Diagnostic tool.

  Start - type in the search-> memory box - find top - click - right Memory Diagnostics tool
  RUN AS ADMIN follow the instructions

  How to run the diagnostic tool memory in Windows 7
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">