Forum of the need to help with Win 7/PowerShell

Similar Questions

• Need help with Win XP Installation on Satellite A200

  Hello

  I tried to install Win XP on a new Satellite A200 - 1TJ model PSAE3, so I used the link that is given to me and downloaded the Intel storage utility Disk Manager. But it does not at all.

  I did these steps so far:

  -Insert the CD in Win XP (version 32 b) laptop, press F12 to boot from the CD and start the installation. After the installation has begun, I pressed F6.
  -After a few seconds, Windows XP asked me for some externel drivers, I have inserted the floppy disk with the drivers in my external floppy drive, pressed in and chose the 82801 HEM / HBM SATA AHCI for my laptop. (Yes, it's the right one, I tried with the driver of another, similar, but it works with the first)
  -Continue the Installation, Windows asked me to install Windows XP, press F8 to accept, and she continued.
  -The window to the right controller appeared, I have chosen to format and create partitions, stop the installation and everything repeated while Win Vista is not your HARD drive, but the driver is installed.
  -J' chose C:\ to install, press ENTER to accept and then the first Windows files had been copied on the HARD disk.

  - Then the installation stopped, asked me to insert the "Intel Storage Manager driver" to my floppy drive, in my opinion the right one was inserted, I pressed Enter to continue, but nothing has changed.

  I just tried to use a WInXP unattended to pre-install the right drivers, but with this CD, the installation does not start. I also tried some drivers of Intel and Toshiba for the Intel Storage Manager, downlaoded all them and get to the disk, but it does not continue with the installation of Win XP.

  Maybe someone has another idea?

  You come in on this thread;
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=102243#102243

  The Intel Matrix Storage Manager is the right driver, well, looks like you made a mistake.

  You have formatted and created the partitions after the installation of the Intel Matrix Storage Manager. Please don t format the HARD drive, because in this case, you will lose the SATA driver!

  By the way; NLite software could help you to create a new XP and include the SATA drivers.

• Tecra A10 - I need restore disk with Win XP SP2

  I have the restore for XP Pro service pack 3 disc. I need service Pack2 restore.

  Can anyone help?

  Do you mean that you have received the recovery Toshiba with Win XP and SP3 on this disc?

  So why do you need a Win XP SP2?

  However, I doubt that you will be able to buy a Toshiba Recovery for this laptop disk that contains only SP2.
  In my opinion if you want to use only SP2 then you need to install Win XP using the MS Windows XP disc that contains only SP2.

  Good bye

• Need some help with FLASH

  Hello world

  I'm a very new to using flash 8 and I need som help.

  I know what it mifgt be a simple for some of you, but for me it's a chlange...

  I need to create a page with 6 buttons

  I can create a button without a problem and I can scrupt uncertain and it will open url

  However, if I have 4-5 buttons every thing work towards the top, down etc but the script does not work then link do not OUP page...

  I'm sure it's a simple soluton to this question

  Help, please

  I would like to join .fla file to show what I was doing, but it seems that it's not possible...

  Anyway please help if you can

  Sincerely

  L.

  Your instance names must match those that you use in the code.  The name of the instance provides the means for code assignment and control objects.  If you have btn1 as instance name, the code for this button should use this name...

  Btn1.onRelease = function() {}
  getURL ("http://www.google.com");
  }

  Think of it in terms of talking to the touch... you gave this button name "btn1", so your code needs to say "Hey, btn1, this.

  In addition, in order to keep things clean for yourself, you must create a layer for actionscript, where you take all the code you are currently distributed through the layers of each button and move to that layer.  I often create some to separate the different types of actionscript, variables, functions, actions, but you can do what suits you best.  But having it on separate layers makes it easier to find and manage.

• Card SD NOT recognized on the Libretto U100/U105 with Win XP

  I have several booklet, a combination of U100 and U105, with Win XP SP3.

  I now have a camera with an SD card, but nothing to see everything in the booklet any SD card into the slot.
  I'm astronished and disappointed that Toshiba is a not ship computers laptops with SD card reader drivers.

  Please, should what driver I install to get the SD card reader work?

  Thanks in advance!

  > I am astronished and disappointed that Toshiba is a not ship computers laptops with SD card reader drivers.

  So all the drivers for Win XP for this Libretto U100 series are available on the European driver Toshiba page
  So I m wondering why you're disappointed with Toshiba

  However, I could find the driver choose:
  Product type: Archives
  Family: booklet
  Series of products: Libretto U100
  Short num: PLU10E
  OS: Windows XP

  Now you should get all the Win XP drivers.

  I guess that the Cardbus driver is the driver you are looking for her should get the card reader controller to work.
  In addition, you must install the SD Secure Module. This software is an update for your TOSHIBA Secure Digital Host controller.

• Desperately need help with win XP Edition family, I need to update my PC but get the error message "cannot connect to the server.

  I need to update my pc, I have windows xp home edition. I had sp2 on my computer, but my system crashed almost and I had to do a total system recovery and it removed my files. Tried to download again, but I can't. I get error could not connect to the server. I have no virus or worms and checked each article are saying sp1 kb. I can't update the Explorer or anything like that

  Follow the links in this article to download the Service Packs from Microsoft.  You can download on another computer if necessary and move them to your machine to update.

  "How to obtain the latest Windows XP service pack"
    <>http://support.Microsoft.com/kb/322389 >

  HTH,
  JW

• Greetings! Need urgent help with BLUE screen, I HAVE MY FINAL COMING towards the TOP AND NEED to WORK!

  Hi, this is the 8th time, I have the blue screem of death and I am unable to find specific solutions for my case is the following:

  Signature of the problem
  Problem event name: BlueScreen
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 2057

  Files helping to describe the problem (some files may be is no longer available)
  Mini041511 - 05.dmp
  SysData. XML
  Version.txt

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 24
  BCP1: 00000000001904AA
  BCP2: FFFFFA600AE74D58
  BCP3: FFFFFA600AE74730
  BCP4: FFFFF800028F0EDD
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1

  I would be really grateful to those that could help because my final exams are around the corner and I do most of my studies online...

  Hi axmankay,

  Method 1: you can see the steps in the link below by Diana d.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/BCCode-24/adfa4cc3-CF61-4797-a7de-1f15323b3f01

  Method 2: See the steps mentioned in the link below

  Pick up the pieces after a computer crash
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

• Need urgent help with the startup of the database

  Hi all
  
  I use oracle 10g on 32 bits of windower server.
  
  I try to start my database today and it gives me error, and that's my production database.
  I need very urgent help you. (I have no rman backup, and data are not n6cessoires so, since it is the practice of the student).
  

  SQL> startup open
  ORACLE instance started.
  
  Total System Global Area  524288000 bytes
  Fixed Size                   790180 bytes
  Variable Size             250343772 bytes
  Database Buffers          272629760 bytes
  Redo Buffers                 524288 bytes
  Database mounted.
  ORA-01110: data file 34: 'G:\ORACLE\DATAFILES_ACADEMY\ACADEMY'
  ORA-01115: IO error reading block from file 34 (block # 1)
  ORA-27070: async read/write failed
  OSD-04016: Error queuing an asynchronous I/O request.
  O/S-Error: (OS 23) Data error (cyclic redundancy check).

  Kind regards.

  Maahjoor wrote:
  Hi dear,

  I need further assistance on your side, I restarted the server, but the same problem.
  as there is a way to drop and re-create a system tablespace? given that the 34 file belong to the tablesapce system.

  concerning

  N °
  So just create a new database. Who will have every ten minutes. And to say that your students to create new storage spaces. Who will be the two minutes.

• Need your help with the following 3 error messages that now appear on my PDF document.

  Hi all

  I worked on a PDF document to the University for the past 4 months. Its a PDF which I was informed as I go along and recording with no problems.

  Today however I try to open it to work and that's what I get now...

  "This document enabled features extended in Adobe Reader." The document has been changed since its creation and use of the extended functionality is no longer available. For the original version of this document, contact the author'

  "There is an error on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem.

  «The font 'GTAJBY + Bliss-Regular' contains a bad /BBbox.»

  It has never done this before, and even when I tried to open my backup file it did the same.

  Can someone help me please? I have so much work that is potentially lost on this...

  (Also, I'm not a large part of the head of the computer, so please keep in simple terms)

  Thanks in advance everyone...

  Great thanks for your help...

  Some "experts".

• Need your help with the problem of SWF file swapping

  Hello
  
  I have two SWF Flash files I want to download in the same HTML file. But I would like to load only one at the time and would like to have a button on each Flash SWF file that causes the other SWF to load.
  
  Hmmm... I don't know if I managed to make sense. (: o) I would like to try it once more. (: o) I would like to exchange a SWF file to another SWF file by clicking on the buttons that are placed on the SWF files! : o).
  
  I was wondering if it is possible, or should I think of another way to work around this problem of mine.
  
  Thank you very much for your help and have a great day.
  
  See you soon,.
  
  Babak

  Khoramdin wrote:
  > Hello,
  >
  > I have two SWF Flash files I want to download in the same
  > HTML file. But I would like to load only one at a time and would
  > like to have a button on each Flash SWF file that causes the other SWF to be
  > load.
  >
  > hmmm... I don't know if I managed to make sense. (: o) I would try one more
  > times. (: o) I would like to exchange a SWF file to another SWF file by clicking
  > on the buttons that are placed on the SWF files! : o).

  make a swf as a holder. call the main.fla file main.swf.
  Embed this file in your html document. This button in place of the file with the
  the following measures:

  on (release) {}
  loadMovieNum ("second.swf", 1);
  }

  in this file have a button with the action to load the 3rd file:

  on (release) {}
  loadMovieNum ("3rd.swf", 1);
  }

  by charging them at the same level (1), they replace each other.
  Pretty simple... uh?

  --
  Concerning

  Urami

  --

  Happy new year guys - all the best there is in the 2006 :)

  
  http://www.Flashfugitive.com
  

  
  http://www.Firefox.com
  

• Need serious help with FPS on COD4

  Here's my situation.  I have two PC that I built and played COD4 for a year.  The only main I have on average 250 fps in multiplayer mode and the other 130 fps.  I got an internet problem with my modem which is triggered my whole system.  My ESET Smart Security block the connection if my firewall is enabled and was just a difficult fix, but somehow, I got all my internet running so I went to open COD4.  Got into the game and I got a max of 40 fps on pc and it has been on COD5 too.

  I think that it is a network problem, because when I join a server my use of the network in the Task Manager go ever higher. 08% when in a server.  I reinstalled COD4.  I don't think it would be hardware or operating system because they two different PC have been hit by the same problem after problem with my modem.  All of my graphics wise parameters are the same as they were before.

  I really don't think it's a hardware problem, because I can play solo at 300 fps yet and I'm averaging 25 fps in multiplayer mode on two different PCs.  It seems that something is wrong with my network, but my speedtest and browsing results are fine.

  Any suggestions?

  Hi Bowler30088,

  Thank you for using answers Forum.

  If it happens on separate computers, chances are it's a frame with your router.
  The fact that your getting 300 FPS with no. network activity and low number in a multiplayer server is also an indicator that the network appears to be trolling.

  If your able to achieve normal speeds through your browser, this means generally that it is a firewall try to block multiplayer port.

  I recommend that you check the settings of your modem and router to see if a firewall is causing the problem.

  I hope this helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Need QUICK help with XP Recovery Console

  My computer has rejected the slightest error and says to insert disk at startup to enter R for repair through the repair console and windows (he said I was missing a windows / file fat32.) I followed these instructions and it took me to the recovery console which someone else told me to enter chkdsk/r at the command prompt I did and he told me that the volume appears to contain one or more unrecoverable problems. All solutions on how to solve this problem or what might be the problem or maybe I'm not in the right order? Please help me soon I have files on this computer, that I need.

  Start the computer with a Linux Livecd such as Knoppix or a Bart PE and copy the data files on an external hard drive or USB key. Then test the hard drive as it looks to be a failure.

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). MS - MVP - Elephant Boy computers - don't panic!

• knowledge of the need and help...

  Hi guys, im using windows vista 32-bit, and im planning to upgrade with windows 7. and I have microsoft office 2007. I want to know if I update I will lose it. location I do not have a cd.  and also my driver software? I would lose all?

  Hello

  If you run a taken microsoft support upgrading programs and data should be good

  Note the word "should".

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  you will need to check on your computer and the websites hardware manufacturers to see if they have drivers for windows 7 available

  they write drivers for their products non-microsoft

  and for windows 7 questions post in the forums windows 7 ther on the link below

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• New without the need of help/advice

  Hello everyone

  I am new to use without. We are a small company and our budget COMPUTER is almost nonexisant. I bought a PS500XV from a seller on Ebay with the intention to integrate in one of our servers in VMware ESXi 5.1. In it, I received a box with cables of power, a RS-232 cable and rails... NO software, NO manual, NOTHING not to mention when I sent the seller (which resembles a TON of Dell sale without) was quite short and said that they did not provide a service to the customer... all, I asked to was a little direction...

  So I'm here now looking for advice. There seems to be precious little on the page of Dell support for the product. It seems that when these aircraft are delivered, they understand the management / configuration software and I guess some sort of manual... I have NOTHING.

  Please is - anyone can help me and at least point me in the right direction. I carried on a keyboard, searching the Internet looking for info... nothing helps.

  Thanks in advance or a person everyone's help!

  Phil

  Hello

  You don't require any special software to manage the table, other than a browser.

  Unfortunately, you don't have a contract support, or guarantee, so you can't get a support account.  Allows you access to the documents, and related software.   The license to use the firmware comes with the contract warranty or support, not in the HW himself.

  All models of table work the same in regards to installation and operation.  Different controllers of discs, number of network adapters, cache will be different, but the software will not.

  It may still be possible to get the order table so that you can put under contract.  However, the 5000 series will end of life August 2014.  No support will be possible after that.  Some vendors sell these paintings with spare disks that would prevent you to get a support contract.

  Basic configuration.  The easiest option is to connect to the serial port, 9600, n, 8, 1 No. Flowcontrol. (Not HW and SW, AKA Xon/Xoff

  Press enter, you should get a login: prompt.   Enter with password grpadmin grpadmin.

  It should prompt allows you to configure the array.  You must select what interface.  (ETH0 is by default), then a record IP address for the port.  Then you enter a member name, which is unique to each Member of a group.  Then you enter a GroupName.  Whether the Group would be EQL - SAN, the name of the Member could be EQL-SAN-member1.  Then, you provide a group IP address (that corresponds to the address management and discovery).   You get so prompt to create the group.

  You will then get prompted for a password and an administrator password.

  Once created, you'll be a GrpName > prompt.

  You can now use the Web GUI, make sure you have Java installed, and point the browser to the IP address of the group.

  It manuals are online also.  I.e. psonlinehelp.equallogic.com/.../configuring_an_array_and_creating_a_group.htm

  There are also many other useful links, which you can find through a search engine.

  www.confignotes.com/.../Dell-EqualLogic-CLI-configuration

  Once you get logged in, you will be able to configure the RAIDset.   Suggest to not use RAID5.  He is more vulnerable.  RAID6 might be the best solution.  So be sure to select the name of the Member-> Network tab and configure the other network ports.

  Finally, make sure that you both modules control cable.

  Kind regards

• I need a CD with Win 7 but am out of warranty

  My Alienware x 51 r2 didn't come with the disk to install windows 7 and I can't ask to another using the media form because I am out of warranty. What is the best way to get a Win 7 dell disc?

  My computer does not start for some reason system repair mode any.

  Turboatomic

  What is the best way to get a Win 7 dell disc?

  You must call the Support Technology Guide.

  However you can also use an .iso of Digital River as shown here:

  cs_setInnerHtml ('video_195656b0-0968-42 5-b250-4e9f3d48320c d', ");

  More details here: