Similar Questions

• I found the solution for the problem of sound-acpi with Satellite P100-219

  Hello

  I found the solution for the problem of sound-acpi with Toshiba P100 (it works with P100-219 at least). I can provide the source modified and compiled table DSDT, but I would like to know if it is possible to get these changes in the next update of the BIOS?

  See you soon,.
  MIK

  Hi Mik

  As you know that it is not possible to find info on the next BIOS, especially if you want to have some information about the Linux operating system. Just wait and see if some forum users pointed out something on the subject.

• QuickLook 3 - error (not found user information)

  Hello!

  When I try to open QuickLook 3 on my laptop HP ProBook 4510 s, I get the following error:

  Error: No user information found. Cannot continue.
  

  Do you know why is that?

  Thx for your help

  This means that you have not configured HP QuickLook and captured user information.  However, the program is installed and activated.

  Open MSOutlook.  You should see two icons on the far right of your toolbar (to the right of "Privacy") for HP QuickLook.  They resemble (i) with the green arrows on them (the program name appears when you hover your cursor them).  I do not use Outlook Express and Vista Mail, but the icons should be here somewhere as well if you use these programs to your e-mail.

  Click on the one called "HP QuickLook préférences".

  Select a setting in the tab "Capture".  Select the "Folders" tab, and select the information you want to capture.  And to set your preferences for security on the last tab.

  Apply the settings, then click on 'OK '.   A prompt appears stating he had to enter the information in the folders that you have selected.  According to the amount of information, email etc. it may take a few minutes.

  Once you have entered the information close Outlook and turn off your computer.  When you press the QuickLook button you should not encounter the error message - because the program now "found" the information of the user.

  Good luck.

• Error message "revocation information for the security for this site certificate not available. Do you want? [Yes] [No] [View the certificate]

  For awhile, I got the dialog box with «security alert "revocation information for the security for this site certificate not available.» Do you want? [Yes] [No] [View the certificate] ". » I know that many, if not all, sites are OK because I used them several times in the past.

  I tried different "fixed" found by Google "revocation information" and nothing solves the problem - what is.

  When I try to make various updates, not related to this problem, I can not download updates due to a security problem.

  Suggestions for a computer challenged the user? Thank you.

  Richard

  http://www.brighthub.com/Internet/Security-Privacy/articles/82291.aspx

  read this, see if he can address your question.

• How to keep the audit record for access to the Internet folder?

  Referring to the following link, I like to keep the audit record for access to the file from the Internet,

  Does anyone have suggestions on the option that I can put on this record?

  Thanks in advance for your suggestions

  http://support.Microsoft.com/kb/310399

  Hello

  You can follow this link & check if the problem persists:

  Monitor attempts to access and change settings on your computer

  Hope the helps of information.

• store Windows 8 will not update of applications preinstalled for standard user in a domain after an initial profile.

  Performed a clean installation of Windows 8 Enterprise.  Logged on as a local user; (the computer is not part of the domain yet). Run all Windows updates successfully.  Store Windows displays 15 update on live tile. The store opened, updates applied successfully.  Computer joined to the domain.  Sign in for the first time on this computer as a member of the domain administrator group.  Profile is normally based.  Windows live store tile shows 15 updates, updates applied successfully.  Log off, then back on as a standard domain user.  Store Windows displays 15 update on live tile.  Shop open, 15 updates is displayed in the upper right as usual, click on, try to update, app update screen says there is no update. Live webcam tile said even 15 updates. -This seems to be a permissions issue.  On the desktop if this happens under a standard user account, I am prompted to enter a username Admin and password to install applications to work around this problem, in the store or (metro UI) there isn't this feature.  How to work around this problem?  I found that in the standard user account if I uninstall one of the apps store in need of an update, (xbox music) for example, and then reinstall it from the store, the live tile stores bed 14 updates.  I could do that for all the applications that are installed by default on Windows 8, but it sounds a little crazy.  This problem seems to occur with pre installed applications requiring updates once your profile generated for the first time.  Suggestions?...

  Hello

  For support of Windows 8 Enterprise edition and related issues, please ask this question in the following forums.

  Windows 8 IT Pro category:

  http://social.technet.Microsoft.com/forums/en-us/category/w8itpro

  Concerning

• Simple question... How do to add pictures on the body of my MAILS found 1000 results for how can I add photos to my Thunderbird emails

  How can simple question - I add photos to my mail body. But instead of the answer - found 1000 results for how can I add photos to my Thunderbird emails. There are answers that don't apply at all to the question anyway. Why must it be so difficult to get a simple answer to a simple question?

  Thunderbird is a bit like Microsoft, all the reasons as I dumped MS Live Mail.

  First, a lot of help for Thunderbird refers to the menus that may not be visible. It would be useful to you and us if you have your menus and toolbars visible.

  http://chrisramsden.vfast.co.UK/13_Menus_in_Thunderbird.html

  Then, open a window of writing. Activate the menu and operate.

  Now that you see an option "Insert"?

  If this isn't the case, you can assign composing in plain text, which does not support embedded images.

  Tools | Account settings| {Select account} | Composition & addressing and ensure "Compose messages in HTML format" are checked. If it is not already checked, go back to writing a message. No better now?

  Once you have the mode of composition HTML goes, you can use Insert | Image or various permutations of copy - paste and drag - move to the body of your message.

  A manual of sorts: http://en.flossmanuals.net/thunderbird/composing-messages/

• Satellite P300d 10v - found some drivers for Vista

  Hello!!!

  My laptop is Satellite P300d 10v and I coud not found some drivers for vista!
  I look in the page drivers toshiba and a find some drivers as a some other display drivers driver Bluetooth!
  When a driver install package value my easy touch keys does not work!
  Also a woona install win xp instead of vista, but a cant find any drivers for this laptop (p300d 10v) sata!

  Sews enyone had the same problem?

  Help, please!

  Thnx!

  Hello!

  If he chooses the compatibility, he will lose a little performance. So, it's not a good idea ;)

  The best way is to load the SATA drivers. It can also create a clean Windows disk with nLite.
  http://www.nliteos.com/

  Good bye

• iTunes will not find any information for the CD already in the library when reuploading of lossless

  I'm downloading all my CDs to iTunes in the form of files without loss. All of them are currently in my library as mp3s. Why iTunes can't recognize and fill in all the information for me, I have more than 2000 download, many of them are collections of course of b-sides and live concerts. The only time where iTunes fills in the info for me is when I insert a purchased disc and only then, if I'm online. Many of these discs made House also have blankets make home for which the original jpeg files have been lost on an old computer. ITunes definitely has the ability to recognize a disc that reflects the amount of titles and sometimes tracks that already exists in its own library. Am I missing something really obvious and basic here?

  iTunes uses the Gracenote CDDB service to retrieve the title of the CD, the track names, etc.  This is based on matching a "signature" issue of track numbers and durations for a complete disc, not the tracks.  It won't recognize not so CD "home made" unless you used the option to download the metadata for a specific drive of Gracenote.  iTunes has a capacity to recognize the CD that have been imported before, but the data that supports that are stored in one of its preference files, not in the iTunes library and so actually works only if you import on the same PC you used for the previous import.  Since I have while I did use or test this feature, so I'm not 100% sure what limits there - I think it depends on access to metadata for a disc of content before you import it, not after.

  Also, although Gracenote does support the images work that they are not used by iTunes - the function get Album artwork (when it's working properly) gets images on the iTunes Store, based on the correspondence of the values of the artist and Album.  Works of art created by the user, you need to have access to the original files or a backup of them.

• Found 0 results for my browser missing important elements, the menu..., whole tool bar drop down to print, copy, work offline, file, save, bookmarks, history. I just installed latest foxfire on windows xp. Found a few instructions, but they called in the

  Found 0 results for my browser missing important elements, the menu..., whole tool bar drop down to print, copy, work offline, file, save, bookmarks, history. I just installed latest foxfire on windows xp. Found a few instructions, but they called the keys of my computer does not have (key under OSX there no file, edit, history, help, tools, navigation, all the things that your directions say to use. Also, I'm still hanging and the message a scrip is running. I don't know what are the thises scripts but I of course don't need them.

  This has happened

  Each time Firefox opened

  == I just noticed it. It probably happened when I upgraded foxfire.

  Don't see the menu bar not (File, Edit, View, history, Favorites, tools, help)?
  Turn on/off the menu bar is a new feature in version 3.6.
  (Linux and OSX see: what happened to the file, edit and view menus? )
  Windows Method 1. Press and hold the key and press the letters of the following in this exact order: V T M
  Windows method 2 Press and release the button. The Menu bar is displayed; then choose ~ ~ red: V ~ ~ iew > ~ ~ red: T ~ ~ oolbars and click on ~ ~ Red: M ~ ~ enu Bar.
  The menu bar should now be displayed permanently, unless you turn it off again using view > toolbars. Check = not displayed, NO check mark is not displayed.
  See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing

  Navigation, bar toolbar bookmarks and other toolbars under view > toolbars. By clicking on one of them will place a check mark (display) or remove the check mark (not shown).

  To display the status bar, view, and then click status bar to place a check mark (display) or remove the check mark (not shown).

  Mode full screen
  http://KB.mozillazine.org/netbooks#Full_screen

  See also:
  Back and front toolbar buttons or others are missing
  Customize controls, buttons, and Firefox toolbars

• I have a Mac and I want to remove the feature "Firefox prevented this site automatically redirecting to another page. Show you how do to Windows, but I have not found how to for Mac

  I have a Mac and I want to remove the feature "Firefox prevented this site automatically redirecting to another page. Show you how do to Windows, but I have not found how to for Mac

  This has happened

  Each time Firefox opened

  == I try to go to page to a new page

  Thanks Cor - el.

• Information for replacement of disk for Satellite M30X 134

  Hello Ladys and Gentleman,

  I need information on the HDD of the Satellite M30x 134. The point is the notebook of my girlfriend one need new hard drive and im not to stay in the same city. I have not found any information on the toshiba site. If anyone knows a site with information or know by experience, please say so. so I baught a new HDD before him go visit and fix it fast.

  How big is the HARD drive
  What connection is used
  What voltage drive hard need
  and / or
  A replacement hard drive part number

  Many thanks in advance

  Hello

  I've checked a few threads here on the forum because these themes where already discussed and M30X needs an IDE HDD to my knowledge it s interface IDE (ATA-6)

  Marina has already suggested that some larger HDD (160 GB, 200 GB) might be unsupported and that he would not be recognized by the BIOS.

  This is why I would recommend checking some small s: drive HARD 80 GB & 100 GB

  Greetings

• ENVY 750-197c: cannot download drivers Win 10? "We have found the drivers for your product...". »

  I just installed Win 10 (64-bit) on my desktop and I want to install/update the drivers on my computer because my internet on it is a little wonky (and in general I want to update the drivers anyway). However, when I go to the page "Software and drivers" and enter my name/type of product, I get a message saying "we have found the drivers for your product. Drivers may be in development, so please check back at a later date or visit the product home page. ». There were drivers available here yesterday. How long this change usually take? Can someone help me find the drivers of the template from another computer that might work for my computer? Thank you!

  Hello:

  It looks like all the drivers, specifications and manuals are missing from the pages of support again.

  This happened earlier in the week also.

  Another Member of the forum has reported the problem to administrators forum, which will be in touch tour HP, but since I am not employed by, nor do I represent HP, I don't know how long it will take to restore the missing data to the support pages.

  Whether the weekend will not help much either.

• I FOUND THE SOLUTION FOR THE TX WIRELESS PROBLEM!

  Hi guys,.

  IM pretty happy problem because I found the solution for my tx 1219 us wireless!

  First of all, my laptop started with wifi problems. Then, when I tried to start, nothing has been posted.

  I read a lot of posts on forums that talking about changing the motherboard by HP.

  I sent my knees to HP in Argentina - where i live - and they had sent me a budget with a «renewed» system map

  I was paying, so I pretend a new.

  Tired and frustrated on the HP customer service: they dosen´t recognize their mistake. They dosen´t give me GUARANTEE AND they pretend a lot of money for something refurbished!

  I found a post where a guy - now away for me is 'God' - explains how to fix this problem yourself! AND a lot of positions where other guys did, and they confirm that it works!

  Here's the method. Feel happy!

  This post is for the repair of the range of following HP laptop: tx1000, dv2000, dv6000, dv9000, with AMD processors and graphic chips from nvidia (6150go).
  Symptoms are more, wireless wireless card are running out, are repeatedly, the laptop, it does not ignite until several attempts and finally the laptop turns on but he did not have no image in the monitor, in some models, you listen to some sounds.

  The cause is excessive overheating of the GPU from nvidia, which has powered up to 100 degrees or but tends to fail the welds that unite it to the mother of the card.
  HP already admitted the existence of the failure in the design of the card, and extended 2-year warranty, so that if even you can demand but the desirable thing is to do, the method I describe is simple and has worked in 100% of those laptop with this problem, prefer all must do it under your own risk.

  Step 1. -It is necessary to compile the necessary material: this is a 1-cent American copper currency or a currency that similar thickness now about a 1/16 of an inch, or a piece with these features, but the copper. also we will need a table lamp with a halogen centre, or the one with the normal centres but it is 150W or but case is that it heats up a lot. disipadora thermal paste of what they take microprocessors (sold at any electronics store).

  step 2. -Once gathered our components, it is necessary to remove the mother card and remove the radiator so that they are exposed to the microprocessor and the nvidia chip.

  Step 3. -Now, we are committed to the lamp, started to warm up a while, in my case I have tapeworm a gun to measure temperatures and saw that it was 134 degrees, once it is hot we close set, but the thing at latest, the graphics chip, but on the other hand, where all the solder points are seen We leave about 5 minutes, which were both that I gave him, no doubt, it can be less, depending on the source of heat, once that done this we have pressed with the fingers with force the graphics chip (care, it will be hot), which will be expanded by heat welding is to merge.

  Step 4. -Now, we put a little disipadora in the room by both parties and we placed on the graphics chip and put the radiator and arm!

  It is with the intention of wrong correct dissipation system design since the heat produced by the chip is transferred to the coin in copper.

  Copper is an excellent conductor of heat and thus provide the heatsink of makes, initially was clearly a very small between the radiator and the chip and when warm itself does not transfer not warmth to any party since not thanks to the air, it can, but the copper coins made this work

  Greetings

  Message edited by Wendy on 30/04/2009 21:02

  Please see the procedure on YouTube

  http://www.YouTube.com/watch?v=musu759LsT4

  Message edited by Wendy on 30/04/2009 21:02

• How can I order a calendar with information for different countries

  In the past, I was able to create a calendar and then order different versions of information for different countries. I can't find this option now. It has been deleted? If this is not the case, how can I do?

  Hey oldcelt,.

  I understand that you want to add information to another country. Let's see what options are available for your calendar.

  You can view the holidays from a specific country. To do this, open the calendar in the calendar settings button settings button of the toolbar and you will see a section for "national holidays of the show. Make your selection and you will be ready to go. For more details, take a look at the information below.

  Change the date of a calendar information
  http://help.Apple.com/photos/Mac/1.1/#/phtb94d9019

  Change the date of a calendar information

  You can easily change the settings of date and your calendar at any time. You can also have your calendar displays events in your calendar application, the national holidays of many countries and anniversaries that you saved in Contacts.

  1. Click project on the toolbar, and then double-click the calendar.

  2. Click the calendar settings on the toolbar.

  3. Do one of the following:

     • Choose a fresh start, month, or year: Use the pop-up menus at the top of the settings pane.

     • Change the number of months in the calendar: Pick a number on the shortcut menu.

     • Display the national holidays of the country: Click the menu drop-down "show national holidays ' and choose the desired country. To stop the display of national holidays, choose None.

     • Display the calendar events: Check the box next to each calendar that you want to display.

       Note: The calendars that you see listed here are the ones you have set up in the calendar application on your Mac.

     • Show the birthdays you have saved in contacts: Select "show Contacts birthdays."

  Take it easy