FPGA: error message - Item not supported

Similar Questions

• recovery disk will not load error message pc not supported by the system recovery disk.

  had a virus that has taken possession of my PC and wanted the money order to the for free, so I install the recovery disk and chosen in advance and restored the pc at the time, he removed the hold and the system worked very well for a few days. then the system kept to self-extinguish. tried loanding the recovery disc and gave me the message pc not supported by the recovery disc, and now when start received bios award phoenix instead of the hp logo.

  attempted to run antivirus software but before he could finish short scan the pc shuts off I tried in safe mode and the same situation. I downloaded several antivirus programs, but it would still be closed the pc. I tried to install the recovery disk, and it gave me an error message pc not supported by the system recovery disk. now when I start up instead of the blue screen with HP logo, I get a bios award phoenix and other information that I can't copy down it goes too fast. Since I couldn't get rid of the virus, he took to a pc using store, they have removed the virus and loading of operating system vista, problem is I had the word and excel. Now, I can not get my desktop to factory oem computer. I really need my word that I have all my passwords for the accounts listed, I saved them to analyze the drive, but now I have not any other readers like drive j. Any suggestion on how to solve the problem, so I can load the recovery disc.

  Thank you very much

  Frenchquarter, welcome to the forum.

  I suggest that you download and install OpenOffice.  It is FREE and is open to all documents created in MS Office.  If it doesn't, at least it costs you nothing to try.

  I used OpenOffice for years.  Believe me when I say that he will do everything that will make MS Office and in some cases, the better.  At least, you will have to use in the future and you'll be amazed to see how they can do it for FREE.

  Please click on "BRAVO", if I helped you and click on "Accept as Solution" If your problem is resolved.

• PPCS4 error message, file not supported or damaged. Need assistance, transfer on a network.

  Hello! I'm having a hard time understand why I can't get files to read on another post to work properly. It works very well with other files of the same type. Is not only a folder if it's all the files I transfer on these stations.

  My current configuration is as follows.

  2 workstations dedicated capture and editing 4 posts.

  They are all connected to a gigabit network.

  All units are running vista 64 Professional with the following specifications

  Capture the machine 1

  core 2 quad processor

  4 GB of Ram

  2 TB of storage

  Capture card from AJA XENA LHe connected to sony betacam deck MSW-A2000P via SDI cable.

  This device captures betacam SP footage in 8-bit uncompressed YUV avi to

  Capture the machine 2

  core 2 quad processor

  4 GB of Ram

  2 TB of storage

  Blackmagic Decklink Sdi

  the same type of capture as above

  the other four machines edition:

  Intel Core i7

  6 GB DD3 Ram

  1 TB

  These machines are also captured from miniDV sources

  I can capture correctly on all computers. It is important on all computers, locally as well. The problem is when they are transferred over the network directly or through the NAS. Transfer MiniDV footage seems to work without problem, it's the files a lot more big who have the problem. QuickTime can open them but the first cannot import I get a message that says not supported or damaged (this is on other machines so different from one that took. I tried to capture directly to the NAS, and it's always the same. I can't understand. Hope someone has a way around it. Thank you

  AJA XENA LHe capture card

  Map AJA may need to be installed on all machines, not only capture machines.

• Adobe will not cannot read my USB key, the error message indicates 'not supported file.

  Adobe will not read my flash drive

  Hello

  ·        What is the format of the file that is stored on the flash drive? It is a PDF file?

  ·        Adobe is installed on the system?

  ·        You are able to open the flash drive on the system (explore the files in the flash player)?

  ·        Are you able to access other files adobe on your system?

  ·        You are able to access the file on another computer?

  ·        Where did you download the file from?

  It could be that the file that is located on the flash drive is corrupt or is incomplete, check if you have another file and try to access it and check if you are able to read or not.

  I would you suggest first copy the file on the system, then directly on the file and check if you are able to access the file or not instead of access from the flash drive.

  I suggest you to follow the suggestions mentioned in the link given below and let us know if it works or not.

  http://forums.Adobe.com/message/2715337

  To further support I suggest you to contact Adobe support. Click on the link below.

  http://forums.Adobe.com/index.jspa

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Firefox suddenly stop working and I get the following error message: could not initialize the safety component of the application. Most

  Error message: has not been initialized component of application security. The most likely cause is problems with the files in the directory of the profile of your application. Please check that this directory has no read/write
  restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and correct the problem. If you continue to use this session, you may see an incorrect application
  behavior when you access security features.

  See:

  • https://support.Mozilla.com/kb/could+not+initialize+the+browser+security+component

• Error message: "could not cop files. Make sure that the target disk is not dead", during the installation of the drivers scanner Epson Perfection V500.

  Original title: the scanner driver update problems.

  Problem: I am trying to install a driver for an Epson scanner update.  I get the error message: could not copy files.  Make sure that the target disk is not read-only.

  I'm running Windows XP Home edition.  Scanner is an Epson Perfection V500 Photo.

  What I did:

  • A release with the support of Epson.  They tell me that I have the admin rights.  However, I am the administrator and log on as administrator
  • I downloaded the epson driver update, which is an executable zip file.  I right-click on the file, select Run As..., opt to run it as an admin user, enter my password and select run.  The files are decompressed, but at some point in the installation, I get the message "couldn't cop files.  Make sure that the target disk is not read-only.  (Target is C:\)
  • Furthermore, I installed this driver successfully on my other computer that is running Windows XP Professional

  Why not copy the driver files?

  Hi Passport35,

  You can try the following steps and check if it helps.

  Method 1:

  You can try running the fixit article and following cjheck, if it helps.

  Diagnose and solve the program installation and uninstallation problems automatically

  Method 2:

  If the previous step fails then I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

  a. click Start, click Run, type cmd in the Open box and then click OK.

  b. at the command prompt, type sfc/scannow, and then press ENTER.

  Note: the scan may take a while, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

  Wait for the analysis of complete and then check if you can install the drivers.

• Error message: "an internal support function returned an error" trying to attach files in emails.

  Original title: Error message-not invited

  Trying to electronic. Error message: 'an internal support function returned an error.'

  Hello

  Which email client you are using?

  If you are facing the issue in Microsoft Office, you can post your question in the Microsoft Office community & get help support professionals.

  Hope the helps of information.

  Please post back and we do know.

• I get the error message "HTTP not found" and "SMTP." not found What is this and how can I fix it please?

  I get the error message "HTTP not found" and "SMTP." not found What is this and how can I fix it please?

  If you try to send or receive messages, you may receive an error message similar to the following error message, which indicates that your Post Office Protocol version 3 (POP3) or host SMTP Simple Mail Transfer Protocol () is not found:

  The host hostname is not found. Please check that you have entered the server name correctly. Account: AccountName, Server: servername, Protocol: POP3, Port: secure (SSL): no, error 11001, error 0x800CCC0D Socket number

  In addition, you cannot ping or establish a Telnet connection to the mail server.

   
  This problem may occur if you have the firewall from Zone Labs such as ZoneAla software...
  This problem may occur if you have firewall software from Zone Labs such as ZoneAlarm or ZoneAlarm Pro, installed on your computer. These programs may prevent communication with your e-mail server.

  RESOLUTION

  To resolve this problem, remove the software firewall from Zone Labs of your compu...
  To resolve this problem, remove the firewall from Zone Labs of computer software. To do this, see the program documentation or contact Zone Labs at the following of Zone Labs Web site for more information:

  http://www.zonelabs.com/services/support.htm (http://www.zonelabs.com/services/support.htm)

  MORE INFORMATION

  For more information about ZoneAlarm or to contact Zone Labs, see what follows...
  For more information about ZoneAlarm or to contact Zone Labs, see the following Web of Zone Labs Web site:

  http://www.zonelabs.com (http://www.zonelabs.com)

  For more information on how to resolve a similar error message when you use Microsoft Outlook on a computer that is configured as an ICS Internet (ICS) client, click on the number below to view the article in the Microsoft Knowledge Base:

  252322 (http://support.microsoft.com/kb/252322/EN-US/) OL2000: (CW) Error Message: The Server could not be found using ICS Connection

  For more information on how to solve an error similar to Microsoft Outlook Express and ZoneAlarm, click on the number below to view the article in the Microsoft Knowledge Base:

  274456 (http://support.microsoft.com/kb/274456/EN-US/) error finding POP3 or SMTP servers when you send or receive e-mail Messages

  The third-party products that are discussed in this article are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.

  Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

  later ducdive

• install new printer Epson WF-2530, will not install scanner drivers error message ' could not launchrequired program during installation, check the installation disc, and then run the installation again.

  having a problem installing drivers for a new Epson printer scanner all in a WF-2530 on my desktop using windows vista

  error message "could not launch the required program during installation, check the installation disc, then re-run the installer.

  I managed to install the software on my laptop using windows 7.

  spending some time with epson tech dept, after several attempts to solve the problem, they advised that it was a problem with the microsoft software.

  have tried to install it on the internet from the site of epson, but same error

  any help would be greatly appreciated

  < have="" tried="" installing="" over="" internet="" from="" epson="" website="" but="" same="">
  Do you mean that you have downloaded the Epson driver?

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&infoType=overview&OID=209709

  Try using the wizard adding printer in the Control Panel, printers. In the wizard, select EPSON under manufacturer. If you don't see your printer in the list, click the Windows Update button. It will take several minutes (about 20) be patient, Windows updates the list. You should see a hard drive activity during the update.

  If that wouldn't work, try to run the System File Checker:

  Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files
  http://support.Microsoft.com/kb/929833?WA=wsignin1.0

• cannot print, I get an error saying does not support automation

  windows Vista i run whenever I go to print something I received an error notice saying not supported automation can someone help me please

  If you open WordPad [start all programs accessories WordPad, type a phrase and click on print, are all printers listed?] If so, is yor actuial printer it listed?

  Please report the exact words of any error message you get, and you're trying to print.

  In the meantime:

  1. Remove all the drivers for your printer installed printer.
  2. Download current drivers of htis web of the manufacturer of the printer.
  3. Install them according to the instructions.

  Tom Ferguson

• I try to install an air 320u sierra wireless card and I get an error message "could not access vb run time for custom action script. Cannot install the Manager of mobile broadband services.

  could not access vb run time for custom action script

  I try to install an air 320u sierra wireless card and I get an error message "could not access vb run time for custom action script.  Cannot install the Manager of mobile broadband services.  Any ideas?

  Hello

  I suggest you run the fixit and see if it helps:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Also check out this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/error-2738-could-not-access-VBScript-run-time-for/1a4499ae-8bc1-4534-9c6f-4d399ac70d9a

  It will be useful.

• I have photoshop CS4 and I can not open RAW files. Error message: could not complete your request because of a program error.

  I have photoshop CS4 and I can not open RAW files. Error message: could not complete your request because of a program error.

  Hijimm

  Please make sure that you have the correct version of Camera raw installed and that you use a camera supported supported by Camera Raw devices check the raw version of camera you have help > on Photoshop(Photoshop>>About Photoshop on MAC)

  Check by using Updates.Select > updates (from bar of menus in Photoshop)

  Or manually install here Adobe - Photoshop: for Macintosh: Adobe Photoshop CS4 11.0.2 update - multiple languages

  Adobe - Photoshop: For Windows: Adobe Photoshop CS4 11.0.2 update - multiple languages

  You can check this thread for the other Possible solution

  Also move this thread of Discussion General bridge in Photoshop General Discussion

  Concerning

  ~ Assani

• Error message "Preview not available for this file.

  I use LR 4.4, but it did not work properly since I got my new camera (Canon 70 d). When you try to import, I get the error message "Preview not available for this file. I got lucky better connection of the device with a usb cable, which allow me to see the jpg images, but he wouldn't let me see the raw images (.cr2). I would solve this problem by opting for the LR5?

  I use LR 4.4 on a Windows 7 PC.

  Thanks for any help that can be provided.

  Robert

  Support for the Canon 70 d was introduced with LR version 5.2. See the link below.

  Camera Raw plugin | Supported devices

• Compressor 4, 4K of MXF ProRes 4 k files, the error message, codec not installed

  Hello
  When you try to convert MXF 4 K in ProRes files I get an error message "codec not installed." I just bought 4 compressor andean can't seem to find a solution because it seems that I have updated with the latest version. Does anyone have a solution to this?

  Strange thing is FCPX can load and process the MXF files...

  In Information systems > facilities see if video Formats 2.0.4 is installed. If not, you can download here.

  Russ

• upgraded to 3.6, bookmarks, lost, lost the toolbar bookmarks, bookmarks library, lost cannot go to the previous backup, error message. Not have Torbutton. Cannot save new bookmarks. AutoFill remembers. Don't forget the story is about.

  upgraded to 3.6, bookmarks, lost, lost the toolbar bookmarks, bookmarks library, lost cannot go to the previous backup, error message. Not have Torbutton. Cannot save new bookmarks. AutoFill remembers. Don't forget the story is about.

  I got this yesterday after the 3.6.4 problem upgrade. I'm not sure if I saw all the things you did, but I have def lost all bookmarks and the back button. I fixed it by:
  1. go to the Firefox profile directory, which for me is here but 1st bit will be different for you as mine work specific:

  C:\Documents and Settings\U049177\Application Data\Mozilla\Firefox\Profiles\soez0lvk.default
  2 delete places.sqlite and places.sqlite - journal

  3. start Firefox (you should have the back button now works but not Favorites, he recreated to these 2 files)

  4. in the menu, bookmarks and then organize bookmarks, then button import and backup, then restore, then select a day to restore from. You should now have your backups Firefoxes bookmarks.

  Hope this works for you