fragile sensitive transitions

Similar Questions

• Remove shadows w/EP 8

  I need to remove the shadows of images.  Help, please!

  Thanks in advance...

  You can try the Clone tool to replace the shadows with adjacent wall.  Because I don't know how good you are with PSE here is a brief tutorial.

  So that you do not accidentally clone on people, you must first select the shade. Then, when you clone the people are protected. Zoom with to expand shadow enough to work with. A good way to choose the shadow is with the magic wand tool. In the tool options bar, check the adjacent box. To select, click a part of the shadow. If the parties outside the shadow are also selected, remove the selection and lower tolerance (default 32) in the options bar and try again. In this example, a tolerance of 15 works. To add additional portions of the shadow to the selection, hold down the and click it. In my example, there are 2 segments of the shadows, and you can see the two selected (dotted mobile).

  

  Now, activate the clone tool, and in the options bar, check the box aligned. Choose a soft brush with a size a little larger than the shadow. ALT-click on the wall right next to the shadow. Then click the shade, replacing the wall. Repeat this procedure with the next shadow segment. In other words, rather than piecemeal cloning, first is Alt-click on the wall at one end of the shadow and slowly drag the mouse along the shadow; the clone will follow the path of the mouse, as I did in this shot (I hid the selection so that you can better see the result):

  

  Depending on how cloning if there could be a sensitive transition on what was at the edge of the shadow. In the photo above you can see this.

  To remove it, remove the selection and again use the tool clone to clone on it. A selection is not necessary in this case.

  Here, I did some of this additional cloning:

  

  Great picture, by the way!

• CP9 sensitive project - where are the transitions between slides?

  Transitions between slides are available via the sync Panel when you create a blank project (unfounded).

  Where are the transitions between slides when you use a sensitive project? The distribution Board is not in the property inspector.

  Certainly, it is always possible to add a transition between slides for a sensitive project? If so, how?

  The slide transitions are not supported for projects of a reactive nature, they are not yet supported for the release of HTML5. The distribution panel is available (at least in the Expert user interface), you can apply a transition, but HTML5 Tracker will indicate that this is not a supported feature.

• IMovie 10.1.2 Transition issues

  Just to let you know, I have an OS X El Capitan MacBook Air 2013 13 inch 10.11.6. My iMovie is version 10.1.2. I was recently working on a slide show with a fairly large amount of open applications. My fan has worked very hard to cool the system, and finally the slideshow became lag. My problem is that the shift has also caused a strange effect where I am unable to drag in transition effects. Rather than insert the transition, iMovie keeps the thumbnail still of the transition. How can I fix it? Any help is appreciated!

  It seems that your processor is unable to follow.  I first iMovie then re-open it, preferably with fewer other active applications and you can see that everything is OK again.  It may be too much background things iMovie past that will make them less sensitive.  The solution is just to wait for 10 minutes about before continuing with the installation.

  Geoff.

• do not sensitive - create banner ad expand on roll, how to tutorial code workflow?

  Please note: I'm not asking how to make sensitive banner advertising or how to animate or add movies

  I need a small banner to expand to a larger ad - like this: extensible Banners.com | Push down banners | Corner Peel banners | Banner Busters | Rich Media banner ads.

  I used to make sites in flash. -J' also used reflow edge - Dreamweaver... and I use edge lead for this project

  a. is adobe animate a good tool for doing a multimedia expansion linked advertising banner is the workflow?

  b. how can I do literally the smallest ad... extend to the larger work and ad?

  a banner ad 720 x 90 on rolling it develops up to 720 x larger than 150 [or something] expnded version has a movie and links

  How to make the transition from the small ad large ad?

  Better prognosis, but it's a question [div size] size of canvas - so...? no answer anywhere!

  Has a button, but on a larger scale? It would be the largest banner '-click'?

  B. 'symbol' except touch... I don't know

  C. take this thing an adobe product different - if so what would the workflow and tutorials?

  Thank you!!! I'm a designer not a code wizard so please be gentle!

  Expanding ads are considered Rich Media. And must be served by providers of trusted Rich Media such as Sizmek, Pointroll, DoubleClick, etc.. There are the criteria involved in the expansion of the ads that are not something that you create yourself.

  Here is the link to DCRM model filtered to animate dashboard

  Rich Media Gallery | Database model

  Models DCRM filtered to expand our feature

  Rich Media Gallery | Database model

• How Camera Raw and various profiles to manage the Transition to overexposure

  With all the attention that I had to pay to profiles lately, I've been opening many images with colors vivid blue (where my recent post on trying to get better blue color).

  One of the things I noticed is that the transition to overexposure seems to be treated VERY differently depending on the chosen profile.

  Of particular interest is an image that I shot recently to a stage where some blue lights shone on the crowd and in the goal of my Canon EOS - 40 d of.  I was surprised how differently the transition towards overexposure is based on the chosen profile.

  Not including one of the profiles provided by Adobe manages this transition smoothly at all, showing a few transitions strong - which explains why I had so much trouble with the color of the sky.

  Some examples follow (they have all been converted to sRGB for viewing through a browser).  Specifically, note the area around the blue light at the top right.

  Adobe Standard profile such that supplied with Camera Raw by Adobe:

  

  Camera Standard profile such that supplied with Camera Raw by Adobe:

  

  Profile of landscape of camera, like that provided with Camera Raw by Adobe:

  

  Very good 40 d profile "sRGB Standard of the DPP" Vit Novak gave me a few days earlier, based on measures of how Canon DPP manages the colors:

  

  The format of JPEG in camera:

  

  -Christmas

  This change in color when blue/cyan is intentional, also because blown blue colors are rendered around 190 degrees tinted sRGB, so transition should be smooth. But in the case of sRGB profile, it's suddenly somewhere near half of LUT (according to saturation), where the nonlinear values sRGB reached 1, while Adobe RGB, it is much more smooth. Looks like it's cut into sRGB

  About highlights and possible appearance of the hard core it's the Canon seems a built-in LUT that extends above the 1 brightness value, in order to cover the sensor output after whitebalancing, where R and B can be greater than 1 (because the R and B channels is less sensitive and they are multiplied with WB R and B multipliers). DNG profiles do not offer this capability - above 1 everything is cut prior to calculation of LUT, so I adjusted the calibration for the different process, but it can not be handled properly. So whatever I do, it won't be the same in this region (and there may be additional logic in the camera). But ACR has recovery slider, which compresses the upper region to fit into the LUT

  This topic is quite complex, really

• Is it possible to change the sensitivity of the mouse in the sierra?

  Is it possible to change the sensitivity of the mouse in the sierra?

  Open system preferences > mouse

  See: Customize your mouse > the basics of the Mac: set your preferences - Apple Support

• E-mail account became case-sensitive?

  I have several email accounts on my iPhone and my iPad. One is a gmail account where I capitalized the first character of the email on the iPad (even if the gmail account is tiny everywhere).

  Recently, I changed the PW and, of course, has had to update my gadgets Apple with the new PW as well.

  No problem on the iPhone (7.1.2), but on the iPad (9.3.5) I'm stuck in a deadlock situation.

  He told me that I have to 'Enter the password again' and I get redirected to another page (web page?) where I get my new PW. However, he is rejected because "the user name or the IPL is wrong" which they are not.

  As I am out of the normal e-mail settings page (and can't get there until I asks me to enter the new PW again), I can not change the spelling of the user name.

  I came to the conclusion that some Apple update has changed the 'method of comparison of the name of the user' from case-insensitive to case-sensitive. I'd rather be changed to how it works on my iPhone. Or at least to find a way to change my user name capitalization, somehow.

  Any ideas? (Deletion and reopening of the account according to me, would be not a little practice, I would lose a few emails sent from the iPad, I don't)

  Hello. The web page is a login to Google to confirm the validity of your change. Your Google user name may be case sensitive. Maybe it's a change in security by Google. If gmail saves sent mail (I don't know), then deleting your account on the iPad shouldn't lose those who can not be recovered.

• problems of sensitivity and the iPad2 scrapie

  G ' Day... my iPad2 (that I've had for a few years now, but well looked after) suffering now of hyper sensitivity when I touch the screen, i.e. on Facebook I 'like' a post and it goes to the image and the post office several times with just a touch on the 'like' button without touch me even the photo...

  I also have a problem where the screen, especially on Skype, goes from an image full screen of the person I'm talking to a picture of mosquito net and shortcuts back between the two, on a random basis quick...

  Ive used my iPad 2 with no problems at all for a few years and it is placed on a cool flat surface when not in use. It never leaves my office but she has a crack in the screen but its been there for months without risk for the device.

  Anyone have any ideas?

  Thank you

  RF.

  You can try a Reset and restore, but I think that the crack has a lot to do with your questions. These things only get worse with use.

  Reset: hold the Home and Power buttons until you see the logo Apple (10-15 seconds).

  Restore your iDevice: https://support.apple.com/en-us/HT204184

  If your backup is in iTunes, make sure that it is encrypted.

• Export of results in abrupt transitions slideshow

  Do not have this problem before the OS X El Capitan.

  Re: Photos - slide show transitions becomes jerks after export

  Help, please!

  Hello flight_test,

  Thank you for using communities Support from Apple. I know have a problem with the export of photo slideshows for OS X, it's not what you expect. From what you said in your other thread and troubleshooting already suggested, I would recommend testing in a new user on your Mac, as this can determine if unexpected behavior is related to the file by the user or by setting trying to reproduce the problem to another user account. This process includes creating a new user account, connect to it and test for the issue.

  How to test a question in another account on your Mac.

  You can also try to export the slideshow in different definition (480 p, 720 p or 1080 p) and see if that makes a difference with this question:

  Export photos, videos and slideshows - Photos help

  See you soon!

• Audio Crossfade transition

  I want to add a transition crossfade audio in Final Cut Pro X I could with Final Cut Express.

  I use Final Cut Pro X 10.2.3.

  I'm on MacBook Pro (retina, 13 inches, early 2015).

  2.9 GHz Intel Core i5,

  Intel Graphics Iris 6100 1536 MB.

  The easiest way is to make moving.

  It is really easy, as Mark Spencer explains in this episode of MacBreak Studio:

  MacBreak Studio: EP. 295 - Audio creation cross only melted in the final...

  If you have no movement, you can do so using expand Audio/video (Ctrl-S), and then extend the audio parts and using the fade handles:

  

  In case you do not have Motion I can easily create such a transition for you.

• Photos - slide show transitions becomes jerks after export

  The slideshow transitions become jerks after export to iTunes.  Sliding panels, classic, etc. normally play in the Photo Slideshow app, but become "sticky" or "jerky" following export.

  I don't remember this problem with iPhoto or earlier versions of IOS - even when the films were anchored.  Is this a known issue?

  How can this be repaired?

  OS X El Capitan 10.11.6 (15G 31

  Model name: iMac

  Model ID: iMac10, 1

  Processor name: Intel Core 2 Duo

  Processor speed: 3.06 GHz

  Number of processors: 1

  Total number of cores: 2

  L2 Cache: 3 MB

  Memory: 8 GB

  Bus speed: 1.07 GHz

  What is the size of the slide show (# of slides) and what theme are you using?

  What size export the slide show as?

  How much space you have on your startup disk?

  Download and run Etrecheck.  Copy and paste the results in your response. Etrecheck is a diagnostic tool that has been developed by one of the most respected users here (and recommended by Apple Support personnel) of the CSA to provide an overview of the system and help identify the most obvious culprits that can adversely affect the performance of a Mac.

  

• Save the transitions as elements?

  I have a bunch of movies that will need the same transitions intro and outro, is there a way to save the transitions as an element so I can just copy and past them in quickly?

  Thank you.

  You can save short assemblies and projects with transitions between dummy clips.  You could then copy and paste into a new project and replace the dummy clips without affecting transitions.  Drag the new video on the model so the green '+' sign shows and then select "replace".

  Geoff.

• Cold fingers should not affect the sensitivity of the trackpad to a remote AppleTV2?

  I experienced problems with the trackpad on the AppleTv2 remote while VoiceOver is enabled. (It works perfectly when Voiceover is turned off). We discussed it in the store today, but the guy was rerouted...

  In-store, it has worked for everyone except my mother cold fingers (which really needs, the voice off option as it is registered blind)-should affect the trackpad temperature or is she just unable to live in modern society?

  (Only Apple TV 4 has a trackpad, so I guess that's what you meant).

  Touch sensitivity depends on many factors, but the temperature and, above all, of sweating the difference.

  ATV4 settings for control of Siri is adjustable at what speed he reacts to movement of touchpad. Updated the speed slower can be useful.

  Also note that other remotes can be programmed to control ATV and there are many accessibility options that can make it easier for your mother to use.

  ------

  Apple TV User Guide - site https://help.apple.com/appletv/#/

  Apple TV User Guide - iBook https://itunes.apple.com/us/book/apple-tv-user-guide/id1050195582?mt=11

• How to keep the transitions of the Apple Photo Jpeg codec

  I made a slideshow a few years ago using iPhoto and exported in the form of film. It uses transitions strongly, especially of crossfades. Now when I try to upload it to a site like vimeo, the video must be converted using a standard codec such as H.264. Once converted, all transitions are lost to the gross final video in comparison.

  Is it possible to convert this video and preserve transitions?

  Format:

  Apple Photo - JPEG, 640 × 480, in Millions

  Apple Photo - JPEG, 640 × 480, in Millions

  Apple Photo - JPEG, 640 × 480, in Millions

  Cross fader, 640 × 480, in Millions

  16-bit integer (Big Endian), Stereo 48,000 kHz

  DV, 720 × 480 (640 × 480), in Millions

  FPS: 0.36

  Data rate: 6852.76 Kbps

  Duration: 0:00:05:15.41

  Normal size: 640 x 480 pixels

  Try to open the file with QuickTime X and must convert the modern use.