problems of sensitivity and the iPad2 scrapie

G ' Day... my iPad2 (that I've had for a few years now, but well looked after) suffering now of hyper sensitivity when I touch the screen, i.e. on Facebook I 'like' a post and it goes to the image and the post office several times with just a touch on the 'like' button without touch me even the photo...

I also have a problem where the screen, especially on Skype, goes from an image full screen of the person I'm talking to a picture of mosquito net and shortcuts back between the two, on a random basis quick...

Ive used my iPad 2 with no problems at all for a few years and it is placed on a cool flat surface when not in use. It never leaves my office but she has a crack in the screen but its been there for months without risk for the device.

Anyone have any ideas?

Thank you

RF.

You can try a Reset and restore, but I think that the crack has a lot to do with your questions. These things only get worse with use.

Reset: hold the Home and Power buttons until you see the logo Apple (10-15 seconds).

Restore your iDevice: https://support.apple.com/en-us/HT204184

If your backup is in iTunes, make sure that it is encrypted.

Tags: iPad

Similar Questions

  • problem with Safari and the opening of sites

    problem with Safari and the opening of sites

    Please describe the problem in more detail?

    Try to reset the settings of Safari:

    1. open Safari

    2. click on the Safari menu at the top (to the right of the Apple logo)

    3. Select the Preferences/Privacy tab

    4. click on remove all data from the Web site

    5. close Safari.

    Remove cache Safari files:

    1. click on finder

    2. look for the menu GO to top

    3. click on GO and hold down the option key. This will show a user library folder.

    4. click library and find the Caches folder

    5. in the folder caches com.apple.Safari Ouvrezledossier

    6. move the Cache.db file Trash.

    This should solve the problem. If it does not help, try to disable the Safari extensions

    1. open Safari

    2. click on the Safari menu at the top (to the right of the Apple logo)

    3. Select Preferences

    4. find the Extensions tab

    5 disable all extensions of

    6. relaunch Safari

  • 'Find' is case-sensitive and the option does not appear on the search bar

    As I said, it is case sensitive. I looked for an answer and everyone says uncheck case-sensitive on the search bar, but he's not here. I am on a mac with os x 10.9.4 using Firefox 32.0.1.

    I thought about it. I had to restart with disabled addons. I don't know which extension caused the problem, but the change stuck when I re-enabled the addons.

  • Problem with certificate and the exception is not available

    So, here is my problem I am trying to connect to a secure server. When I do this, I get to a page telling me the browser appears not that the server is secure and that the certificate is old.

    When I click on the button "Add an exception" a small window opens saying the certificate is new safe and I can't add an exception.

    The exeption box is grey so I can't click in and the button 'Add exception' is olso gray so I can't click on it. I click on the button "Cancel" and return to the page telling me the server is not sure.

    How can I go about solving this problem?

    Check the date and time of the clock on your computer: (double) click on the clock icon in the Windows taskbar.

    Find out why the site is not approved, then click on "Technical Details to expand this section.
    If the certificate is not reliable because no issuer channel was provided (sec_error_unknown_issuer) and then see if you can install the intermediate certificate from another source.

    You can retrieve the certificate and check details such as WHO issued the certificates and the expiration dates of certificates.

    • Click on the link at the bottom of the error page: "I understand the risks".

    Let Firefox recover the certificate: "Add Exception"-> "get certificate".

    • Click on the "view..." button. "and inspect the certificate and the Coachman, who is the issuer of the certificate.

    You can see more details like the intermediate certificates that are used in the details pane.

    If "I understand the risks" is missing, this page can be opened in a (i) frame and in this case, try the shortcut menu and use "Frame this: Open image in New Tab".

    Note that some firewall monitors connections (sure) and that programs like Sendori or FiddlerRoot can intercept connections and send their own certificate instead of the certificate of the Web site.

  • How to install this update and resolve problems of USB and the touchpad?

    I Equium M50 (59th) and am bitten by an update that pulled my touchpad and keyboard. I did the new installation of XP Home and have all updated drivers and everything goes well. The last update, what I can't understand is for
    Ana _2005_10_24_V1.2 driver is for, Standard Open HCD USB Host Controller... X 2 .........

    The update addresses all kinds of questions like I'm having and is an update recommended driver detective, I use offten.

    The problem is that it says uninstall the drivers for the i have installed already and when I do it it hits off my USB mouse me leaving no able to install the new. When I reboot it installs those I don't want not reinstalled.

    This is the read me, off the coast of the new update and really I don't understand to underdstand what to do... .so here it is?
    Driver revision history:
    Twinhan VP704A Driver Release Notes
    -------------------------------------------------------------------------------
    Note:
    1. in the event that the system hangs when running with VP704A, please install ULI
    Host USB 2.0 in \ULiUSB20Driver driver

    2. for XP/SP1, please update with the patch in

    3. in XP/SP1, update driver will crash the system, while the new facility is ok.
    The trick to update driver XP/SP1 is illustrated in the following steps,
    a. uninstall the driver
    b. disconnect and reconnect the USB device
    c. install the driver
    4 to support the controller remotely, please launch Agent.exe in \Agent.
    Further details at \Agent\Readme.txt

    Known issues:
    1 multi-instance is not supported
    2 remote wakeup is not supported
    3. strong use of the processor from analog video/audio capture
    4. bad Signal using color YUY2 format IST
    5 AV sync if audio captured the wrong filter.
    (Difficulty: use the filter "USB Audio Device" in the flow WDM capture device)
    6. noise with analog TV and FM Radio
    (Difficulty: use the filter "USB Audio Device" in the flow WDM capture device)

    Driver revision history:
    -------------------------------------------------------------------------------
    2005-10-24, version: 1.0.2.8
    Bugs fixed and new features:
    1 is not correctly configured.
    -------------------------------------------------------------------------------
    2005-10-21, version: 1.0.2.7
    Bugs fixed and new features:
    1. the firmware version read FLASH OK!
    -------------------------------------------------------------------------------
    2005-10-14, version: 1.0.2.6
    Bugs fixed and new features:
    1.MUtil - access driver empty part lower part of screen when IST!
    2.MUtil - access HCT pilot check fix crash!
    -------------------------------------------------------------------------------
    2005-10-07, version: 1.0.2.5
    Bugs fixed and new features:
    1 tuner turns off when S-Video, Composite.
    -------------------------------------------------------------------------------
    30/09/2005, version: 1.0.2.4
    Bugs fixed and new features:
    1.agent.exe update for repeat bug!
    2.TI5150 sign up to fix video Format!
    -------------------------------------------------------------------------------
    2005-09-29, version: 1.0.2.3
    Bugs fixed and new features:
    1.A pilot of the trial build for multiple access medium. (in the folder "\Multi-Access")
    Note: The filter 'Audio device USB' provided by the system does not support mutil-access.
    2 reset TI5150 when a new frequency is defined
    -------------------------------------------------------------------------------
    2005-09-27, version: 1.0.2.2
    Bugs fixed and new features:
    1. difficulty I2C unstable access on some devices.
    -------------------------------------------------------------------------------
    2005-09-23, version: 1.0.2.1
    Bugs fixed and new features:
    1. analog TV becomes sometimes darker.
    -------------------------------------------------------------------------------
    15/09/2005, version: 1.0.2.0
    Bugs fixed and new features:
    1. difficulty of installation INF for Windows 2000.
    2 FM scan radio policy changed!
    -------------------------------------------------------------------------------
    13/09/2005, version: 1.0.1.9
    Bugs fixed and new features:
    1 USB string serial number not visible with USBView, updated firmware required.
    2. political analysis of FM radio, return of release if PLLOffset > = 9 x 12. 5 kHz
    -------------------------------------------------------------------------------
    13/09/2005, version: 1.0.1.8
    Bugs fixed and new features:
    1. after the passage between AV/D/A several times, video display becomes dark in THDTV 2.61
    -------------------------------------------------------------------------------
    12/09/2005, version: 1.0.1.7
    Bugs fixed and new features:
    1. improve the performance of check channel lock status
    2 pinnacle INF Fix.
    -------------------------------------------------------------------------------
    2005-09-09, version: 1.0.1.6
    Bugs fixed and new features:
    1. Add an audio initialization function.
    -------------------------------------------------------------------------------
    2005-08-31, version: 1.0.1.5
    Bugs fixed and new features:
    1 separation of PAL and NTSC resolution mode.
    -------------------------------------------------------------------------------
    2005-08-30, version: 1.0.1.4
    Bugs fixed and new features:
    1.AvgTimePerFrame.
    2 frame drop.
    3 pinnacle inf file HCT chkinf fail.
    -------------------------------------------------------------------------------
    2005-08-22, version: version 1.0.1.3
    Bugs fixed and new features:
    1. add remote control interface in digital source filter.
    2.A new remote test tool that contains of the source code in \Test_RC.
    -------------------------------------------------------------------------------
    2005-08-16, version: 1.0.1.2
    Bugs fixed and new features:
    1. Pinnacel & Twinhan driver & file reorg.
    2.VP704A_BDA_Test tool, add a test to the system code.
    3. set the standard infrared protocol of "IRSTANDARD", "IRSYSCODECHECK1" registry keys in the INF file.
    4 firmware update
    -------------------------------------------------------------------------------
    2005-08-15, version: 1.0.1.1
    Bugs fixed and new features:
    1 serial number feature is lost when the audio volume of the TV control
    2.RC6A support CIR
    (This firmware uses GPIO3 (M9207 pin 80) to decode the RC6 Protocol.
    The material must be reworked to connect the M9207 80 pin to the CIR module and the actual
    EEPROM must be flashed with \Firmware\M9207.bin)
    3 Serieal, MAC address and name of device OEM taken in charge.
    Please see for more details on the \Firmware\readme.txt.
    4 Ioclt example source code included.
    -------------------------------------------------------------------------------
    08/08/2005, version: 1.0.0.10
    Bugs fixed and new features:
    1. increase audio volume analog TV.
    -------------------------------------------------------------------------------
    04/08/2005, version: 1.0.0.9
    Bugs fixed and new features:
    1. analog TV Video mode failed.
    -------------------------------------------------------------------------------
    2005-08-03, version: 1.0.0.8
    Bugs fixed and new features:
    1.off - centerf frequency scan + / 125Khz
    2 difficulty program a copy scanned in MCE.
    -------------------------------------------------------------------------------
    02/08/2005, version: 1.0.0.7
    Bugs fixed and new features:
    1.THBDAConsole.exe 'ulFixedBW', 'ulDisableOffFreqScan', 'ulMCEFreqTranslate' bug
    -------------------------------------------------------------------------------
    2005-07-28, version: 1.0.0.6
    Bugs fixed and new features:
    1.THBDAConsole.exe 'ulFixedBW', 'ulDisableOffFreqScan', 'ulMCEFreqTranslate' support
    2. improve the stability of I2C communication.
    3 unify signaling resistance & quality as a THBda ioctl interface.
    4 capture filter lock state control.
    -------------------------------------------------------------------------------
    2005-07-28, version: 1.0.0.5
    Bugs fixed and new features:
    1. the same strength & quality signals as VP7046.
    2 debug build pilot
    -------------------------------------------------------------------------------
    2005-07-21, version: 1.0.0.4
    Bugs fixed and new features:
    1. put the INF update.
    -------------------------------------------------------------------------------
    2005-07-20, version: 1.0.0.3
    Bugs fixed and new features:
    1 improve performance in PCM4
    2 passage of the analog TV Mode to FM Mode failure
    -------------------------------------------------------------------------------
    2005-07-04, version: 1.0.0.2
    Bugs fixed and new features:
    1. production tool FM test OK!
    --------------------------------------------

    And here is the Readme file from the other file in the update?

    ************************************************** ************************************************
    ULi PCI to USB Enhanced Host Controller Driver V1.72 for Windows 98 SE, Windows ME, Windows 2000 and Windows XP
    ************************************************** ************************************************

    ----------------
    INTRODUCTION
    ----------------

    This driver supports the host EHCI ULi controller under Windows 98 SE, Windows ME, Windows 2000
    and Windows XP.

    -------------------------
    CONTENTS OF THIS DOCUMENT
    -------------------------

    1. installation instructions
    2. uninstall instructions

    ----------------------------
    1. installation instructions
    ----------------------------

    (Windows 98SE & Windows ME)
    ULi USB 2.0 Controller has strapped on the system
    1. install the driver USB 2.0 ULi
    -Run the Setup program.
    -This program will copy the driver files in your Windows system, and then restart your computer.
    2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
    Host Controller"and install the driver.

    B.If any ULi USB 2.0 on the system controller
    1. install the driver USB 2.0 ULi
    -Run the Setup program.
    -This program will copy the driver files to your Windows system, then turn off your computer.
    -Fix the ULi USB 2.0 computer controller card and restart your computer.
    2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
    Host Controller"and install the driver.

    (Windows 2000)
    ULi USB 2.0 Controller has strapped on the system
    1. install the driver USB 2.0 ULi
    -Run the Setup program.
    -This program will install and load the driver and you do not have to restart the
    computer.
    B.If any ULi USB 2.0 on the system controller
    1. install the driver USB 2.0 ULi
    -Run the Setup program.
    -This program will copy the driver in your Windows system files, before turning itself off
    your computer.
    -Fix the ULi USB 2.0 computer controller card and restart your computer.
    2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
    Host Controller"and install the driver.

    (Windows XP)
    ULi USB 2.0 Controller has strapped on the system
    1. install the driver USB 2.0 ULi
    -Run the Setup program.
    -Click "NEXT".
    -This program will install and load the driver and you do not have to restart the
    computer.
    -Once install the driver ULi USB 2.0 successfully. System will detect "USB 2.0 Root '.
    Hub. " Please select "Install the software automatically (recommended)" and then
    Click 'Next' to continue the installation.
    -This program will install and load the driver and you do not have to restart the
    computer.
    B.If any ULi USB 2.0 on the system controller
    1. install the driver USB 2.0 ULi
    -Run the Setup program.
    -This program will copy the driver in your Windows system files, before turning itself off
    your computer.
    -Fix the ULi USB 2.0 computer controller card and restart your computer.
    2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
    Host Controller', proceed with the installation.
    -Once install the driver ULi USB 2.0 successfully. System will detect "USB 2.0 Root '.
    Hub. " Please select "Install the software automatically (recommended)" and then
    Click 'Next' to continue the installation.

    Notice:
    If you can not configure driver successfully. Please restart your system, then follow
    steps to reinstall driver above.

    ------------------------------
    2. uninstall instructions
    ------------------------------

    1. open the "Control Panel" folder.
    2 call the "Add/Remove Programs" icon
    3 choose the "ULi USB2.0 Driver" section.
    4. click on the "add/delete" button to remove drivers.

    -----------------------------------
    Change list:
    -----------------------------------
    1.74
    1 fix this multi-interface keyboard may not be detected on the USB 2.0 hub.
    2. support all USB2.0 Host Controller.
    1.73
    1 problem on Win98SE, blue screen when you unplug a USB 2.0 Scanner after scanning image.
    2 solve problem on Win98SE, blue screen when you unplug a few Scanner USB 2.0 USB 2.0 Hub after scanning image.
    3 fix on Win98SE, blue screen when copying of files through the hub of UH-204 SUNBOX.
    4 solve problem as wirless lan will disconect when the plug in usb device.

    1.72
    1 fix that system crash when HD USB copy large files.

    1.71
    1. improve the management of power in Win98 / Me.

    1.70
    1. improve the devcie detection function.

    1.62
    1 solve the problem that can not operate a USB HUB USB 2.0 disk when the system resume inactive.

    1.61
    1 solve the problem that some device under USB 2.0 HUB is not found if resumes suspension system.

    1.60
    1. in support of functions power management when a HUB with the USB plug in device
    a root HUB.

    1.57
    1. Fix USB with USB 2.0 HUB floppy cannot detect problem.
    2. fix audio problem that can not display smooth when peripheral USB connect to the system.
    3. fix system cannot detect DVICE USB when the USB device attached to the system in
    suspend mode.
    4 fix when root USB HUB have a full load, USB HD sometimes
    failure of the transaction.

    1.56
    1 fix that device of DVD decoder cannot display correctly.

    1.55
    1. fix OTI USB 2.0 drive hand cannot detect question.
    2. attach the USB mouse cannot be used after the resumption of hanging.

    1.54
    1. to improve the safety of the driver.

    1.53
    1. transfer bulk fix may stop if the USB device is connected to the USB 2.0 hub
    2 difficulty USB 2.0 mass storage device cannot access after the release of the standby mode if there is an another USB 1.1 existing device

    1.52
    1 correct fault of system pages when accessing the storage of mass Win98SE or scandisk device failure when selecting
    automatically fix file system errors
    2. fix system may hang on in Win98SE / ME if USB 2.0 cardbus card is plugged

    v.1.51
    1. to improve the compatibility of USB 2.0 card reader.
    2. fix USB IDE devices are not accessible after the release of the standby/hibernation mode.

    v1.50
    1. improve the transfer block

    v1.48
    1. difficulty of installation of the USB 2.0 LAN driver hangs up
    2. attach a USB 1.1 card reader cannot be identified when plugged into the USB 2.0 hub
    3. fix some laptops starting hanging Win98SE

    v1.47
    1. improve the performance of bulk transfer.
    2. fix the failure of USB 2.0 Preview in bulk webcam.

    v1.46
    1. support USB 2.0 and 1.1 devices isochronous
    2. fix system hang up when restarting system if the USB 2.0 host controller is disabled in Win9X / ME
    3. fix system hang up when you uninstall the driver if there is USB 2.0 connected under Win2K/XP devices
    4. improve the capacity of the device detection in Win9X / ME

    v1.45
    1. fix system hang up when the mode standby ACPI.
    2. attach the mouse sometimes does not disappear when it is unplugged.
    3. fix the failure of detection of composite devices Win9X and improve device composite Win2K/XP

    v1.44
    1. composite crutch
    2 improve the detection of devices

    v1.43
    1 improve the failure rate of transfer IDE read/write with USB 2.0 to IDE bridge on the platform of PC card
    2 difficulty at high peripheral speed detected as full-speed device
    3. fix some problem of failure detection USB mouses
    4. fix some problem USB 2.0 Hub failure detection
    5 difficulty Win98SE crashing if ULi EHCI 1.42 is installed

    v1.42
    1. fix PC Card eject hang up in Win98 / ME
    2 difficulty of interruption/resumption hang up in Win98
    3 sometimes solve USB 1.1 device cannot be detected if OS starts with USB 2.0 and 1.1 devices plugged
    4. fix some failure detection of PC Card USB 1.1 devices

    v1.41
    1. Add new feature that system can install the driver ahead of the device is plugged in.
    2. fix PCMCIA OHCI controller resources affect problem on Windos ME.

    v1.40
    1. support Win9X/ME / 2 K/XP with ULi USB 2.0 driver.
    2 fix PCMCIA EHCI controller detection device USB 2.0 problem in Win9X / me.

    v1.32
    1. Fix problem that pilot cannot detect the Microsoft driver in Windows XP
    If the path of the OS is not c:\windows.
    2. Fix problem that pilot cannot detect the USB 2.0 controller device in a system.

    v1.31
    1. Fix problem that driver cannot install on Windows 2000.

    v1.30
    1 fix than Win9X / shows ME no USB 2.0 hub.
    2 solve the problem that hang up when the second entry in Win9X S1 with HID device connected.
    3 Fix problem that sometimes when you click on "search the hardware changes.
    for PNP ULi USB2.0, controller, the system will inform you the usbehci.sys
    file is not found.
    4. Fix problem that v1.20 can't find no EHCI controller to install the driver for after different
    verison of ULi EHCI controllers devices are connected and disconnected.
    5 install the driver support for several features of controller EHCI ULi existing on
    system at the same time.
    6. determine Win2K/XP shows hub USB root for USB 2.0 hub.

    v1.20
    1. support ULi USB 2.0 for Windows 98SE/ME/2000/XP host controller driver.

    ULi Coporation. (ULi) web sites:
    http://www.Uli.com.tw/ (Taiwan)

    CAN SOMEONE TREAT ME LIKE A CHILD OF TWO YEARS AND GIVE SOME ADVICE AS TO HOW TO OBTAIN THIS UPDATE.

    I'D VERY GRATEFULL AND KIND OF THINK IT would BE BENEFICIAL to a LOT MORE than PEOPLE LIKE I SEE a LOT OF XP AND PROBLEMS OF THE KIND THIS UPDATE IS SUPPOSE to FIX.

    It is said above 2 relevant and 1 right ANSWER available...

    I'm new here, so anyone could direct me to these answers?

  • [Satellite Pro A200] - slow when problems of transfer and the warmth of the data.

    Hi people.

    I have a 1.5 years old Toshiba Satellite Pro A200 with 200 GB HARD drive standard. For some time, his behavior is just... weird.

    Sometimes the system slows down. She behaves just slow, it freezes frequently for a second when simple tasks such as entering the text. It; s busiest during intensive data transfers (e.g. copy files via FTP from my copy of the USB or LAN), but sometimes it happens even when no application other than Firefox does. It is not apparent, so I wonder - service it will take in terms of warranty (which means - is there a probability that you will say that everything is perfect and charge me for it?)
    The computer was once on the repair under warranty, they replaced the HARD drive with another. Is it possible that the other has problems as well (check S.M.A.R.T. discovers nothing). Or is it maybe faulty SATA controller?

    Another thing is the temperature. During the normal work (Internet, MS Word) two hearts runs at 60 * C. When the set temperature may exceed 90 * C and the computer sometimes shuts down. I guess the problem is dust accumulated inside the laptop but I do not see how can I clean.

    Go to the service of this kind of problems?

    Virus scanners can slow a system down considerably, what antivirus do you use?

    If you have a lot of programs installed, perhaps its time to back up your data and reinstall Windows. I do it myself every year since Windows tends to become bloated and slow after a while.

    With respect to the dust, you can Sauté using a can of compressed Air sprayed through the main entrance of air (when the system is off).
    Or if dust is really bad, you will need to send it to a Service provider authorized to do so and cleaned disassembled.

  • Want to Phoenix 860-010: problem with fonts and the noisy fan

    I have a new machine, just a day old, and I'm having a problem with fonts.  The file Explorer, Edge and other similar programs seem to go from a very readable font that lights up in half a second or less whenever I move down on the page in these applications.  Police that results is much more difficult for me to read because of the lightness that results. I have not met this problem before.  Frankly, I don't know the source of the problem.  Is it hardware (video card) or (Windows 10) operating system software?

    Hello @PhotoGene47,

    Thanks for the quick response!

    Have you tried to see the document that I mentioned in my previous post?  If you prefer to have the Board repaired, you can consider contacting the HP support by phone for additional options.  Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
    http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

    I hope this helps.

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Kind regards!

  • Problem with LED and the comparison.

    Hi everyone, I have trouble with this application, so I hope that someone could give me some advice. Im going to explain as best I can...

    So in this VI, I have 4 signals that I need to compare them, I need the smallest and largest value, so I used a restructuring of business to do. I do 2 groups to be compared, and then the result of each one of them receives another comparison to get the values that I want. My problem is, for the largest value of all the 4, I need an LED to indicate what is most great, and something I have is in my attachment. I take my first group two and put 2 LEDs, so when the comparison occurs, you turn and the other goes OUT, (which indicates that one is the largest and the other is the smallest), and again the same thing in the other. But as you can see, when running I have two LEDs indicating, in every comparison, which is great, but I need a LED lights up when this value is present. and the other three offshore. I know that work in this way, the result I m going to get, but I can understand how to continue with the result of this step, I need.

    As far as I know, there is no way to compare more than 2 signals at the same time, so I tried to merge the signals, but this didn t help me at all (maybe is something that I do not understand how to merge works, so if anyone has an example on how to do things, i´ll check).

    All data are dynamic, a NI 9237, but since its a laboratory, I can't get a lot of time trying different solutions, so I did a test TDMS file and change the DAQ Assistant for a reading of file of the measure, but the rest is the same.

    Use 'antenna bundle' to build a picture of your values of 4 controls. Return the index of the max and min elements, use 'table max and min. From there on, it should be a wink to indicate the corresponding settings.

  • connection printer MG7520 problems with password, and the new name of the router

    I had to change my router network name and the password (the actual router is the same, but the network name and password is different). Now my Canon MG7520 won't 'talk' to my lap top, room rvia wired or wireless LAN (that worked before). My guess is that I need to "tell" the printer name and the password are different, but I know dn't how.  I tried to download the software and run it (that is to say, all over again) but when I do I get an "unable to acquire information on the driver and software.

    Any suggestions?

    Hi sdwhite,

    Yo are quite right that any time changes to network configuration, the printer must be given new items.  The printer can be connected directly from the operations Panel, and I have included full instructions HERE.

    It has not responded to your question or problem? Please call or write to us at one of the methods on the page contact us for further assistance.

    This has answered your question? Please click on the button accept as Solution so that others may find the answer as well.

  • XP problem constant errors and the loss of the Im... Reformats multiple

    Well after a long time to use my computer * the bed... He said that the Config/System file is missing or damaged was told to fix. So after about 10 formats later and the error comes constantly with 1 million other mistakes so many different blue screens... Unmountable Boot Volume cannot locate a beehive... Explorer Windows crashing constantly... I don't know what it is material, but it crashes constantly and if I open up to mozilla it blocks the comp... I had weird graphics problems with games that would make executives to jump everywhere after about an hour of use? Memtest says there is no errors or it's my HARD drive?

    Hello

    • Are you able to boot to the desktop?

    You can check these links:

     

  • Problem with FWSM and the same L3 interface switch

    I have two 6513 s with a 802. 1 q trunk linking them. Each switch is redundant Sup720s running in native mode, worm IOS 12.2 (18) SXF (that they were running out of SXD3). A FWSM (ver 2.3 (3), routed mode, unique context) is in each switch, Setup in failover mode.

    I can't get a PC in a virtual LAN that has the defined layer 3 interface on the switch with the active FWSM in this document, to communicate with the devices 'behind' the FWSM. If I move the configuration of layer 3 to this vlan to the other 6513, everything works fine.

    The MSFCs are inside the firewall, they have a configured layer 3 interface in the same vlan as the FWSM 'inside' interface. Several "same security level" interfaces are defined on the FWSM and used to protect the farms. I use OSPF on the MSFCs and FWSM and the routing table is correct.

    The FWSM generates connections to the attempts made by the PC with interface layer 3 defined on the same switch as the active FWSM very well, so this isn't a problem with FWSM ACL.

    A ping of the FWSM "inside" interface from a PC with the defined layer 3 interface on the same switch as the active FWSM fails, although debug icmp trace on the FWSM demand and response shows. A the packet capture, using the NAM-2, only shows the request packets. I captured on the vlan common and FWSM port channel interface bottom of basket.

    Just to add to the confusion, if I capture in the same places, but do the ping of a PC which is in a VLAN with the interface of layer 3 defined in the 6513 which does not contain the active FWSM, that works very well, I see the request and response on the capture of vlan common, but only on demand on the capture of the port channel.

    This problem has been there since the beginning of this implementation and has not changed with IOS and FWSM software upgrades. I had this experience with all the VLANS that I tried to define the interface of layer 3 to on the switch with the active FWSM. I turned on MLS.

    If anyone has experienced this and solved, or knows what is happening, I would be grateful for any ideas.

    Thank you.

    Keith

    Keith, are you running etherchannel distributed on of your 6513?

  • ESXi5 - problems with NFS and the data copy store

    Hello world

    I recently moved into a solution fully virtualized for my network, 3 x 5 ESXi servers running on our GigE network.

    First of all, I use all free software from VMware, so vCentre etc is out of the question.

    I have major problems when you try to copy files between:

    • NAS (NFS) to ESXi 5 host
    • ESXi host to the NAS (NFS) 5
    • And using VMware converter between ESXi 5 hosts converter Standalone

    The problem is that whenever I'm transfer between hosts I am struck with the horrible network performance. Even if I use GigE adapters and switches between my hosts I will receive no more than 12 Mbps speed of transfer real (100 Mbit/s connect?).

    On the flipside, if I use virtual guests on the same exact host I can happily transfer data between my NAS (NFS) servers with speeds between 60-150MBps ~ (1000 Mbps).

    Examples:

    Speed of 10 Mbps of transfer of ESXi_1 copy OF NFS data store share ~

    Server2008 (comments, located on ESXi_1) copy OF NFS 75MBps transfer rate ~.

    Server2011 SBS (comments, located on ESXi_2) copy OF Windows share 2008 (ESXi_1) transfer speed 120MBps. ~

    ESXi_2 copy OF NFS data store share transfer rate 5MBps ~.

    Attached (wtf.png) example:

    I copy a file that is located on our NFS share first, it's a 3 GB file to the copy within guest OS (2008), it is indicated in blue - top speed of 80MBps

    I copy the same exact NFS share for the host (datastore1), this is indicated in red - top speed of 7.5Mbps

    The third transfer/s (green) is between the customers of windows on different hosts, transfer a 6 GB file as well as a copy of the 360 MB file - transfers two happily send to GigE speeds with a peak around 40MBps

    I can reflect these results across the three servers without modification. Copies between you will be able to run well enough (not exactly 100% use of GigE) but at the moment where I try to do something to the data store it will just choke at all about a 100 Mbps connection speed.

    The final image (wot.png) confuses me beyond belief. I would try to explain what is happening here:

    • This image shows two times the same exact file transfers, except even machine PHYSICS
    • The first (red) transfer between the ESXi_2 host server and the NFS share using the browser data store and direct download - its top speed is around 8MBps
    • The second (green) transfer between a guest server 2008 running on ESXi_2, download the same file exactly at the exact location using vSphere Client. I mean the same EXACT file; It connects to the NFS drive by the data store ESXi_2 (NFS share).

    Why on earth can my comments directly download a file on a data store connected to NFS GigE clocked and yet the same exact host cannot go anywhere near corresponding to these speeds?

    As indicated in the title, the problem seems to happen whenever I use ESXi datastore browser on the host computer using vSphere Client or between browser datastore ESXi to/from an NFS share.

    No one knows what might happen?

    Is there some sort of restriction on the transfer of files between a host and shared NFS ESXi 5? Whence this bottleneck?

    Thanks in advance for all the help/ideas that guys can throw my way.

    P.S. Sorry for the wall of text, I really wanted to give as much information. as possible.

    What type of storage you have locally on the host computer?

    I have seen this problem with write-through controllers: http://wahlnetwork.com/2011/07/20/solving-slow-write-speeds-when-using-local-storage-on-a-vsphere-host/

  • Problem with swf and the sound

    Hi all!
    I created a flash animation that includes a sound effect (mp3). The animation works well and the sound plays as expected. But at the end of the animation, the sound is played again. I check my swf file, but sometimes a preview flash. If anyone has experienced this?

    Thank you!!!
    Brad

    Not sure, but you could try adding a script framework at the end of your animation with this code:

    this.stopAllSounds ();

    This line should stop all sounds playing on this timeline, without affecting the Captivate. I can't guarantee that, but it's worth a try. Now, if your animation focuses on AS3, then the above will not work. After return to it is and I'll write the code for you, or do a search (it is not a single line/method).

    brand
    www.elearninglive.com

  • HP 255 G4: problem with sensitivity to the touch and slider jump

    My question - problem could be funny, but it's a problem.

    I bought HP 255 nine G4, from the box. First impression was: a pleasant experience, but first touch was terrible. I had several laptops, but never the same problem: cursor is wavering and being so inprecise it is almost impossible to locate some details using the key.

    I have included a picture of the surface of the laptop. Should I maybe take off this perforated layer and reach the brilliant below surface? I tried to peel on the rounded corners, but he can't go easily, so I didn't damage it.

    Please give me a sugestion. :-)

    I'll answer myself, could someone help.

    When I installed WIN 10, all problems are gone.

    With WIN 7, nothing worked, I was responsible for the search and looking for drivers, but USB 3.0 has not worked, F keys did not work, touchpad was terrible, all together, very bad.

    With 10 WIN, everything worked, only a few development was necessary.

    With the new computer (product end of September 2015) the new system (WIN 10) so enjoy.

  • No problem with SEO and the Muse

    Hello, I have a general question about SEO, I have a client who wants to build a sensitive site, which will replace the current. It is very good except that the existing one has biological research excellent results on google, even the time to first page. The new muse site will keep it or google see it as a new site and drop it is the ranking?

    You should have no problem if it is done well. Of course some links page will change if you add 303 redirects. You can google how to do that.

    But if it is configured correctly, you should have no problem.

Maybe you are looking for

  • Withings scale

    I bought a scale in an Apple Store and I can't connect with my Airport Express.I submit my problem to the Withings and they gave me 4 reasons: or attempt to connect to a network of 5 GHz instead of a 2.4 GHz network. The scale is able to connect to n

  • Is there a way to see the timestamps of all messages in a conversation?

    I have time stamps for messages under tension, but I seem to only get a timestamp in early conversations. If more than one hour or so passes, then I will get another timestamp. But I would really like to see timestamps for each message. Is there a wa

  • ios9.2 - cannot sync/update of contacts between iphone/2 ipads

    The only way I can sync/update contacts between my "iDevices" is by going to SETTINGS > (tap) iCloud. This allows to move the data. But this must be done manually on each device for each synchronization to occur. (Date/time/time zone times are all th

  • import icons media

    In the import media screen, how can I display the icons of files, rather than a list of titles?

  • How can I get Vista "Windows Mail" to check mail using my connection local (LAN) internet?

    How can I get Vista "Windows Mail" to check mail using my connection local (LAN) internet? It allows only wants to "connect" using dial-up, wireless or wired ISP (type PPP) requiring a UID and password, of which none seem to allow me to select a LAN