Free is crushed and startup failure
Hi guys,.
Suddenly my phone begins to show messages about the services stopped, including AIRA, wifi, etc. I powered it off and after it starts. It starts, shows me the logo of the bike, show me an animation on volleyball and turns off automatically. When I try to choose other options like recovery or plant start-up, it displays bike logo for a second and returns to screen bootloader with the error: failed to start. Also, when the system crashed battery was at 80%, but after several attempts to start, the battery fell to 0% and I had to plug in charger. Phone was unfounded.
Any ideas?
You made 2 statements that conflict:
Phone was unfounded.
and then, later
I have not modified in any way other than root.
Since the 2 don't may both be real, who is? Your IMEI will be listed under your profile?
Tags: Motorola Phones
Similar Questions
-
Failure of Windows Vista and the SafeMode of startup failure - crcdisk.sys
Hello
I have a Dell Inspiron laptop computer 2 GB RAM. He had a few months now, and everything has been fine.
Started a few days ago from freezing occasionally so I was forced to restart. CTRL + ALT + DELETE has refused to do anything and so I had to manually remove the battery.
A frozen about three times and then once rebooted showed the BSOD saying something the system failure.
So I rebooted once more and now it restarts just without going on the login screen. I tried to run in safe mode, but it gets stuck on crcdisk.sys or goes in an endless process to restart again.
Is there anyway that I might be able to get back on without doing a full factory reset, as I have all my work stored on the hard drive integrated without backup.
I can open the system recovery options, but none of these options seem to work. All my points of recovery have been removed.
Startup Repair doesn't indicate a problem with the system, so I thought maybe it was a virus? The same thing happened to my wife a few days ago computer and that uses the same Wifi network as me.
Jacob.
To search for malicious software, you must do in Mode safe mode with networking, but you say that you can not get the Options.
There is information below data recovery.
And Startup Repair Info, too.
Data recovery:
1. slave of your hard drive in another computer and read/save your data out there.
2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.
3 Alternatively, use Knoppix Live CD to recover data:
http://www.Knopper.NET/Knoppix/index-en.html
Download/save the file Knoppix Live CD ISO above.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://isorecorder.alexfeinman.com/isorecorder.htm
Download the Vista software from the link above.
After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.
Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.
Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1st in the boot order.
Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.
When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.
Click on the icons of hard drive to open and to understand which drive is which.
Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).
Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If Safe Mode does not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use:
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner: http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Dell recovery options:
Above is Dell to reinstall Vista from the DVD on your computer.
And that way if you have a recovery partition on your hard drive.
See you soon
Mick Murphy - Microsoft partner
-
Keyboard Predator G3-710 at startup failure
Hello world
I had my G3-710 4 months and so far love it until today.
Today I got keyboard at startup failures upward on my predator keyboard and the keyboard does not light. I tried all usb slots and it makes no difference. If I kept Windows, he did the light upwards, but now does not only. I plugged in a spare room and works on all ports.
Is there a way I can definitely confirm that this is a failure of the keyboard before going through the trouble to send it back to Acer?
See you soon
James
Connect your predator keyboard to another PC and check if it gives you error too (the BIOS must be set to stop on error of keyboard)
-
I have a PC running windows XP and it seems to be a virus when the computer starts and arrives at the log on screen. Once I log in, the background appears saying 'safe mode' in each corner of the black screen and an error box appears saying "failed to start Windows. Press 'OK' to repair the startup failure. Then, a diagnosis of FAKE windows disk rises and scan the computer. I really need help and all the fixes involve downloading something and I can not even access my desktop please help im not a computer genius! Also I do not know the specs of my PC because I can't go to windows to get them! :'(
I think that the difficulty with myantispyware site is to know what type of malicious software that you have?
I have this same problem on a friends laptop - I started out in a PE environment and run a couple of different recovery CD of AV companies but the problem remains. I also tried to go back to using System Restore, but it did not work either.
On a work computer download SuperAntiSpyware Portable version from the link below save it on a USB key. Take the USB to the infected computer. Start the computer in safe mode with command prompt. Press Ctrl + SHIFT + ESC. The Task Manager opens. Click file > new task > type explorer.exe > press Ok. Navigate to the flash drive > right click > Explorer. Locate the SuperAntiSpyware file > right click and choose Run as administrator.
I met recently a few new malwares of thugs that are loaded in safe mode effectively preventing you to download or install anything. For reasons unknown to me from the computer in safe mode with command prompt and then run taskmgr explorer.exe prevents malware to load. This method has worked several times for me this week only. Worth.
Superantispy-portable < this="" is="" a="" portable="" scanner="" that="" does="" not="" install.="" it="" can="" be="" run="" directly="" from="" the="" thumb="">
-
Original title: free cell does not
Windows 7 games free cell, solitary and lonely spider sparkles, everytime that I open them. A notification appears in the task bar
as "not responding". I turned this feature of the window then on again without success. How can I solve this problem?
Hi frankromeoRQ,
(1) since when are you facing this problem?
(2) remember to make changes?
(3) is limited only to the integrated Windows 7 games?
It is sufficient to indicate the complete error message you receive.
Method 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 2: Put the computer to boot and then check if the problem persists
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
Continue with the remaining steps to pin-point on the third party service.
After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.
Important: n ' forget not to put the computer to a normal startup follow step 7 in the link. -
I want to free up the memory on my macbook air and have 65 GB of movies hogging the space. I don't want to lose them forever if you want to know how I can free up memory and again back to the film at some point in the future.
If they were purchased through iTunes, you can download again them at any time.
However, there is no way to stream movies, so you have to download the entire file again for a movie.
Open iTunes > iTunes Store > purchased (on the right side of the window) > movies.
Make sure that the sort is set to "Not in my library" If you try to redownload something that has been removed from the computer.
-
Hi everyone, this is my first post, also help on the post would be appreciated.
I bought ipad air 1 after that 2013 but can not get the pages for free. Numbers and imovie I can. IOS9 running at the moment. I have pages when I connect on icloud on my pc. Can I transfer iPad app, because it is not in the ILO purchased in itunes.
Thanks in advance
Newbie
The only way to install an ipad app is through the app store. PC or Mac software does not run on the ipad. Search in the contacts link at the bottom right of this page. Give apple a call.
I guess is the icon for pages in icloud for storing documents pages. At the same time, apple had a cloud based pages. Not sure what happened to her.
R
-
missing loops in Logic 10.2.1 and download failure
question of part 2...
QUESTION 1: WHERE ARE MY MISSING LOOPS? HOW CAN I FIND THEM, RETRIEVE THEM, DOWNLOAD THEM?
(1) my logic Pro 10.2.1 (updated 20/01/16) is missing a bunch of loops from the loop browser. They are grayed out and will not play.
For example, these loops are grayed out:
"Amazing" spoken
'Attention' spoken word
Asian gamelan 01
Asian gamelan 02
03 Asian gamelan
04 Asian gamelan
Asian gamelan 05
Asian gamelan 06
but Asian gamelan 07 thru 21 are NOT grayed out, they are beautiful!
I know that these missing loops were working in Logic 9. Recently, I deleted Logic 9 since I haven't used since getting Logic Pro X in November of 2015.
I probably have these missing on my Time Machine backup loops if all the missing loops were present in Logic 9.
But in the last days (before the release of 10.2.1) I made sure I had downloaded all additional content for Logic Pro X. And it showed as "installed". Then after getting 10.2.1 today, I tried to download ANY extra content again. IT all downloaded fine, except for "" Download All Additional sounds '... " (See Question 2). So question 1 is: WHERE ARE THESE MISSING LOOPS? IF YOU DOWNLOAD ALL THE ADDITIONAL CONTENT FOR 10.2.1 SHOULDN'T ALL MY LOGIC LOOPS 9 (IN PARTICULAR THOSE LISTED ABOVE) APPEAR AND WORK?
QUESTION 2: WHY DOES "Download All Additional sounds" (only 18.3 MB) systematically omitted, 5 seconds remaining, with a fake message "check your internet connection"?
After graduating 10.2.1 I made sure I downloaded all the extra content. It shows installed, with a
exception: when I try to "Download All Additional Sounds", it downloads right up to the mark of 18.3 MB, (which is the total size to download).
with 5 seconds left, but then always (tried 10 times) fails with this message: "Logic Pro X could not complete the download. Check your internet connection and try to download again. "The internet connection is fine and not at all abandoned. I checked all options 'go to sleep' are on 'Never', and I ran check permissions and repair permissions in disk utility.
I see in the release notes that the programming to download additional content has been changed to 10.2.1. I can't help being suspicious
There is a kind of too aggressive code that is causing this failure of the download. But I can always try again in the morning. It is only
18.3 MB for the "Complete Sound Library", all the other many GB of extra content download OK, they all show "installed". I'm only
of the problems (that I can't fix) with the option 'Download All Additional sounds.
Thank you so so so to help them with my missing loops and download failure.
Wade Cottingham
Dallas, TX
I had grayed out like many loops "re-index all loops" in the menu at the top of the loop browser it cured me.
-
What services are free of charge and what services cost money?
What services are free of charge and what services cost money? Somehow I started to receive an invoice for a service I don't remember to help, nor do I remember asking to add to my internet service. I'm always afraid that I don't know what's free and what costs. I know that Microsoft programs would cost something, and probably tech services, but is there something else?
To find information about your services:
- Sign in to billing and account management Web site.
- Under your services, click a service.
- Under your payment methods, click on the mode of payment listed to view your Bill.
MSN Premium is a service that would require a monthly fee
Hotmail more would require a monthly fee
Windows Live services are free
Microsoft Answers is free
-
«Your computer has run out of available memory.» Flight Simulator will now exit. You can't have enough free space on your hard drive. Run Disk Cleanup to free up space, and then try to run Flight Simulator."
I tried to adjust the size of swap file, and I have tried no pagefile.
But I still get this error Message When I try to start FS9.Windows Vista Edition Home Premium 64 - bit Edition
: AMD Athlon (TM) 9550 Quad-Core processor
(Vivid RAM) memory: 6.00 GBYou must specify a linker flag this option in the header of the image of fs9.exe because FS9 is a 32-bit application and use 2 GB of virtual address space.
With the indicator largeaddressaware under your 64 bit OS, it is possible for FS9 to use up to 4 GB of address space.
Get the SBB Explorer (http://ntcore.com/exsuite.php) open fs9.exe, header to open the file then click on 'Click here' and mark "App can handle > 2 GB addresset", save and close fs9.exe.As a preventive safeguard your fs9.exe before if something goes wrong.
-
I try to install Google Earth on my Windows Vista Edition home premium and its failure and I get an error message: 0 x 80070002, how can I fix?
The error message indicates "file not found" - which often means a bad download.
Try another download of Google Earth - if the operation fails with the error message, then...
There are a few things you can try to solve this problem: -.
type in the search box
CMD. EXE
Right-click on the single file that is
Select run as administrator
-the elevated command prompt window should appear
At the command prompt, type
CHKDSK C: /R
and press the Enter key
We'll tell you that the drive is locked and the CHKDSK runs the next time he started - press Y and restart. The chkdsk command will take a few hours depending on the size of the disk, so be patient!Once executed, the command CHKDSK Windows should start normally (possibly after a second auto) - then run the SFC
SFC - SFC System - Instructions
Click the Start button
type in the search box
CMD. EXE
Right-click on the single file that is
Select run as administrator
-the elevated command prompt window should appear
At the command prompt, typeSFC/SCANNOW
and press the Enter key
Wait for that analysis at the end - make a note of any error messages - and then restart.Try installation again -
Computor was disconnected during the installation of Vista Service Pack 2. I did now no operating system and startup repair does not work. What should I do now?
You may have to reinstall Vista from the original media or from the recovery partition according to the type of computer you have.
Hope that you made the backup recommended all of your data before attempting to install Vista SP2.
-
Title: Hardware failure
My Dell hardware scan failed the Smart short Test and gave me an error WHD16-K8B and says 'failure may be imminent. What can I do?
Hello
1 have had any changes made on the computer before the show?
2 are you facing any problem with the hardware?
Method 1:
I suggest to see the link and try to run the troubleshooter and check if it helps.
Open the hardware and devices Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Method 2:
See the article and check if that helps:
Diagnostics of Dell hardware
If the problem is not resolved, contact the manufacturer for additional assistance:
-
Strange (and accurate) failure on laptop
My laptop has been strange. If I unplug it, it loses its internet connection and the only way I found to get it back must turn and turn it on again. However, it takes forever to close / restart, and generally bluescreens. I don't know what is happening, is not that this unless I unplug my computer. The OS is windows 7. The disc has no fragmentation, and drivers are up to date. I tried a hard reset and a clean boot. I found no evidence of any virus, and my last scan come clean. At this point, the only thing I can think to fix is a system restore, but I seem to do those after each update. It's a pain, because I have to fix a half dozen programs each time. Is there anything else that could fix?
Hello
If all device drivers are up to date, then check the question in the boot, because it helps the computer to boot with a minimum value of drivers and startup programs. You can see the article mentioned below.
How to perform a clean boot in WindowsNote: to start the computer in normal mode refer to the section "How to reset the computer to start normally after a boot minimum troubleshooting" from the link above.Meet us with results so that we also offer if necessary troubleshooting steps. -
My girlfriends laptop (I'll post it) is relatively new, October 2011, but was making BSOD and startup repair issues.
I don't know what is happening, but I posted the Minidump to Skydrive here folder: http://sdrv.ms/S4MyUFHello
Use the methods in the convenience store posted
Such as:
Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
Maybe you are looking for
-
EliteBook 8460p: using the fingerprint reader to log on Windows 10.
I recently picked up this 2nd hand computer laptop for use at home. I was happy to find that it has built in fingerprint reader that will keep my children on my account. This is recognised by Windows 10 on the device as a biometric device manager / V
-
Satellite U300 - how to use the recovery disk?
I inserted the recovery disc 1 and then restarted my computer, but nothing happened.I really need to fix my cause cell it's time to review! Does anyone know how to use the recovery disk or affecting function press when the laptop starts to use the pr
-
Task Scheduler has stopped working
This message is displayed every time that I plug in an external display on my Dell D430 laptop device. My Microsoft wireless keyboard stops working, like the mouse. The display used to propose automatically sized correctly, but now it doesn't eithe
-
Cisco TP driver to an existing VCS/MCU integration
Hi all We have environment with an existing MCU and VCS. The customer used to directly configure MCU conference number. now, need us intagrate a conductor of the TP Cisco and move behind the conudctor MCU. This confiuration require erasing MCU config
-
Please help the question above