Freeing up more space: problems with files from disks C and D

Similar Questions

• Satellite M645 - problem with files from Ipod

  I recently had two other notebooks die on me so why I got a brand new Toshiba Satellite M645.
  I have two ipods with music on them from one of the computers.
  When we follow the ways to transfer music on my new computer that I will meet different problems with each of them.

  The first problem is on my video Ipod.
  After clicking on the hidden folders and etc when I find the music file, it shows the files for everything except music.
  Here is the list of files, it gives me

  Calendards
  contacts
  garbage
  NISAM
  Notes
  recycler
  ground
  USB 2.0 driver
  zurim

  If someone could help me with this, or maybe send me to another forum or page that might help me.

  My other is an ipod touch.

  And when going to the devices, it rises driver device USB mobile apple instead of an ipod just like my other.
  When you click on it instead of display the files it just go to the properties and has two tabs, general and material.

  Once more if anyone knows how I might be able to get these on my new computer, I would be very grateful

  That has nothing to do with Toshiba but with your Ipod.

  On the other hand; I have an iPhone and the management of the files it s similar iPod.
  All files need iTunes and using iTunes, you can control files and move between computer and ipod

  However, I recommend you to visit the forum for ipod problems

• I have a problem with the computer is slow and does not file.

  1 of my pc and 1 another laptop, both with same OS - win 7 starter, atom and same ram and Ghz processor.

  The the Task Manager on the two of them performing at about 50%
  I use wifi and same place,
  always pages on my pc are load too late, manyatimes same gmail takes more than an hour to load or load never at all.
  Live TV on my pc crashes a lot and the clarity of the video is too bad, although the same graphics card, wifi, etc. are used.
  Any recommendation to get rid of these problems?
  2. some viruses had infected my pc,
  I tried to scan my pc and the USB with 2 antivirus free and pay different and even contacted the companies and sent them files. But I got no solution.
  On my pc, the files opens, show that a few errors before you open it then on my cell it do not open at all. Only shortcuts are displayed, while the USB is to have 4 GB of data.
  The companies had scanned all files that are intended for them and had recommended some solutions, but none of them worked and I was faced with the same problems.
  It was queries that I had sent to the antivirus company-
  10-20-bitdefender files that are
  > infected. They were initially on my USB, then I connected to another
  > pc. After that, when I connected to my pc, I scanned and that she was
  > no virus. Then the ameliiecouturiaux and the files whatever i seclect opened in a
  > new window and took that wasannoying time. So I copied all the files to my
  > pc, yet once scanned, formatted my USB and then comes the againNow copiedit the
  > problem - all the icons or folders remain the same with the name of the folders but
  > the files inside this foldergot automatically changed and I lost all my
  > data. Now, I can't find any of my files on my pc or my USB. PL send me
  > an email so that I canattach the files and send them to bitdefender. Dungeon of pl
  > secure these files. Some files have an another new error that I had
  > downloaded. More files will be downloaded once I have bitdefender recieveemail to
  
  > that I can answer. PL copy this message in its entirety and add this to your answer.
  According to my knowledge, 2 of my PC are infected and the virus are not getting detected by bitdefender on my PC1 but 4 threats have been detected on the laptop...

  The same files are include the other way on my other pc.

  Whenever I open the files, save option opens and a new file is saved with the file tha but they never get to open in word or powerpoint, only the backup option is displayed.

  The original files are protected by copyright and are lost. PL help me if possible to retrieve and delete all the files once the inspection is completed. You can forward this message to any authorized person.

  Attached files have changed to 1 or 2 k, but there was initially datas in a few MBs.

  201310131003535. I mentioned that somewhere I had formatted the USB key. Just before that, I had copied all files by selecting CTRL A and cut all the files in a directory on my PC. Then I opened the USB and no files were there. But always around 4 GB has been shown as being busy on the USB stick before formatting.
  My pc takes too long to restart, I tried a few 3 - 4 times and no updates have been installed or waiting to install after the 2nd time but when even he took more time than usual to restart and is compared to the other pc taking 2 X the time to restart, but two of them have installed bitdefender. Problem in my laptop toshiba, not pc lenovo, space time with more than 50 percent on the disk processor and Atom c.
  The files on my USB key are automatically replaced by shortcuts and so files open in a new tab and new cases opened are not those of origin who have been saved by me in this matter. Yet once I formatted and scanned, files, pc and USB but still facing the same USB key.
  Problems-

  1. all files are automatically displayed as shortcuts, even if I had pasted the original file

  2. once I click on open, I get an error and then after clicking on ok, some files get opened

  Before sending the email, I had formatted the USB scanned files on my HARD drive and then copied on the USB. The same problem persists. I think that when the files are displayed or open, the virus does something and change his behavior wrongly.

  1 bitdefender watch as new bitdefender is available, I click ok and repair wire starts and then it tells the system to restart.this cycle continues on the race

  2. 2 files are missing (attachment)

  3. could you send me the file by e-mail?  You can also download the link below.

  http://labs.BitDefender.com/

  because the webste or browsers (chrome, firefox) are not respongding.

  4. I could get these 2 points. Browse your computer to locate the removable storage device and right click

  its icon.
  3. in the shortcut menu, point to Bitdefender and select immunize it
  
  drive.
  I am able to open my pendrive ffrom on 1 pc but on my laptop, all the files don't appear as shortcuts 1-2 KB and can not access.
  zwhwenever, I click the icon, the window save under opens for all files.
  on this pci usingbitdefender antivirus am more 2013 16.34.0.1913 downloaded from download.com and the antivirus from bitdefender 60 seconds. 1.0.3.59
  my pc shows the USB key as safe, but laptop with 2 antivirus mentioned above are showing 2 virus - worm.vbs.ch (bitdefender 2013)
  using bitdefendr 2013 more on laptop, I tried to immunize the file but an error was encountered.
  the error is in German-
  Der process nicht auf die Datei zugreifen kann, da sie von einem other process verwendet wird. I closed all the files and tried to immunize the USB of the my computer without having to open the USB by clicking on it.
  Itried to remoe and atach the pendriveagain and even restarted the laptop, but the same error message appeared.
  Properties - 5.10 GB ref 7.89 GB, but when the USB wasopened, all files were only 2 or 3 KB of size.
  1 more problem-i tried to delete the files in quarantine but bitdefender stopped working and went off automatically.
  I copied all the files from USB to pc, they were 2.22 GB, then again, I copied them back after scannig and formatting of topendrive and it was only 1.44 GB
  BitDefender Antivirus 2013 never works and always displays the message to restart the laptop so that it can start working, but it neverstarts. But bitdefendeer 60 seconds work.

  LOL - install software Registry Cleaner to fix damaged or broken registry entries.

  More likely to worsen the situation.

• Problems with file extensions, Vista is slow and crashes

  Salvation of problems with file extensions...   My computer is very slow and is stuck...

  Hello

  Use the startup clean and other methods to try to determine the cause of and correct problems.

  -----------------------------------------------------

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

• I have a problem with hotmail from microsoft, they have blocked my hotmail a/c, saying that unusual activy was noted.

  How is that ms send me texts, but I never freceive them

  I have a problem with hotmail from microsoft, they have blocked my hotmail a/c, saying that unusual activy was noted.

  1} I have not myself sent messages in my sent mail, I spoke to microsoft, their response was ok reset your passsword we will send you a code to your mobile phone that write you it in the box that allows you to reset your password.

  {my mobile is a nokia model last slidder 2220 series and receive sms and text 2} microsoft has the correct number then why I do not receive the code of

  Microsoft?

  help please

  Hotmail is part of Windows Live takes Center.

  Your account has been blocked because you have somehow (according to Hotmail) violated the agreements of the end user.

  Post here or in the Microsoft forums will help you.

  You deal personally with Hotmail.

  Here are 2 links that you use...

  1. the present link tells you what you need to do. It is not a Q & A. Some instructions:

  Your account has been temporarily blocked:

  http://windowslivehelp.com/solution.aspx?SolutionID=f172cbee-3c73-4506-8a1d-4e6e82adb846

  2. this link is for you to ask questions.

  http://windowslivehelp.com/forums.aspx?ProductID=1

  Don't waste your time here. Stay in Hotmail forums.

• I have a problem with file compression and then not be able to extract their share at a later date

  original title: file compression

  I am running Vista Home Premium on my laptop. I have problems with file compression and then not be able to extract their share at a later date. For example, I sent a file compressed to my instructor and she pointed out that she had a .zipx extension and the fact that she was unable to extract the files of ranking. Can someone help me with this problem?

  Hello

  1. do you have a third party compression/extraction of software installed on your machine?
  2. do you get an error message when you try to extract the files?
  3. is the relevant question for the particular file type?
  4. don't you make changes to your computer before the problem?

  Follow the steps and check if they help.

  Step 1:

  Open zip files is to open the folder and drag the content to another folder.

  See article:
  Compress and uncompress files (zip files)

  Step 2:

  If you have a third party software to Compress/decompress, I'd Uninstall it employs the way Windows compression and decompression of files/folders and see if they help.

• Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

  Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

  Would you advice, thank you.

  Hi Hugo,.

  1. what anti-virus software you have installed in the computer?

  2. What is the full error message/code?

  3. the issue occurred after you install Minecraft?

  4. are you able to play Minecraft without any problem?

  5. what happens with Antivirus and Java?

  Windows Update can occur if one or more of the following conditions are met:

  1. the Windows Update database is damaged.

  2. antivirus software is configured to scan the %Windir%\SoftwareDistribution folder.

  3. the service (BITS) Background Intelligent Transfer Service does not receive a content link header.

  4. a required system file is incorrectly registered.

  5. Windows Installer has encountered an error.

  6. the manifesto of component maintenance (EC) is damaged.

  7. the Windows Update service has stopped during the installation.

  8. a version of the file conflict exists with Windows Update agent files.

  Please follow the steps described in the methods to solve the problem:

  Method 1: We will try the steps from the following link and check the result:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058?WA=wsignin1.0

  Method 2:

  To correct the errors that occur when you use Windows Update, install, and run the system update readiness tool. The tool analyzes inconsistencies on your computer and fixes as its current installation.

  You can view the following link to download the system update readiness tool and check:

  System tool update that corrects problems of Windows Update is available for Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  Details of the event log to find what caused the Antivirus and Java to fail:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Hope that the information provided is useful.

  For any help related to this problem or any question of Windows, you can still display in the Microsoft Community Forum!

• Problems with Windows Installer - installer stops and shows the dialog on the command prompts

  Hello

  I hope someone can help me with this question... I looked long and seriously, and you have tried all of the suggestions posted (cancel/save, etc.).

  I am trying to install a program and Windows Installer stops right in the middle of installation and a dialog box appears with information from command line, and the only thing I can do is select 'ok'... the program is not installed.

  Here is the info that appears in the dialog box:

  Windows® Installer. V 5.0.7601.17514

  msiexec/option [optional parameter]

  Installation options
   
  Installs or configures a product
  /a
  Administrative installation - installs a product on the network
  /j [/t ] [/g ]
  Publishes a product - m for all users, allows the current user
   
  Uninstalls the product
  Display options
  / quiet
  Quiet mode, no user interaction
  / passive
  Automatic mode - only progress bar
  / q [n | b | r | f]
  Sets the user interface level
  n no user interface
  b Basic UI
  r reduced UI
  f-full UI (default)
  / Help
  Help information
  Restart options
  /norestart
  Do not restart after the installation is complete
  /promptrestart
  Prompts the user to restart if necessary
  /forcerestart
  Always restarts the computer after installation
  Logging options
  / l [I | w | e | a | r | u | c | m | o | p | v | x | + |. | *]
  i status messages
  w warnings recoverable
  e-all error messages
  a startup of actions
  r registers of the specific action of the
  u user requests
  c initial UI parameters
  m out-of-memory or fatal exit information
  o disk out-of-space messages
  p - Terminal properties
  v performance
  x extra debugging information
  + - Add to the existing log file
  ! -Flush each line in the log
  * - Log all information, except the x and v options
  / log
  Equivalent of / l *.
  Update options
  / Update [; Update2.msp]
  Apply updates
  / uninstall [; Update2.msp] / package
  Remove the updates of a product
  Repair options
  /f [p | e | c | m | s | o | d | a | u: v]
  Repairs a product
  p only if the file is missing
  o If the file is missing or an earlier version is installed (by default)
  e If the file is missing or an equal or higher version is installed
  d if the file is missing or a different version is installed
  c If the file is missing or checksum does not match the calculated value
  has all the files to reinstall the forces
  u all (default) user-specific registry entries
  m all requirements (by default) computer-specific registry entries
  s all (default) shortcuts
  v-runs from source and recaches local package
  Setting public properties
  [PROPERTY = PropertyValue]

  Consult the SDK Windows® install to get additional documentation on the
  command line syntax.

  Copyright © Microsoft Corporation. All rights reserved.
  Portions of this software are based in part on the work of the Independent JPEG Group.

  I hope someone has a suggestion for this problem... I just bought a new laptop and Windows 7 Professional came installed on it.

  Thank you

  Linney thanks for your response!

  The file I'm trying to install is an exe file (so the SIG file is embedded in the exe file).

  I tried the option "Run As Administrator" and it did not work.  However, you gave me an idea that has provided a work around that allowed me to install the program.

  Once this dialog box is displayed with all the control switches, rather than press 'OK', I left on the screen and went in the 'temp' folder and find the MSI program I tried to install (I cross referenced the timestamp of when I tried to install it to find).

  Once I found the updated file, I clicked it, and he proceeded to install the program... I have not had any other problems with the installation.

  So, there's something wrong with the way that the exe file have been created and how the files extracted from the msi file (these are files of Intel and Lenovo - driver updates - so I think they do these things) or there is a problem with Windows Installer.

  For now, at least, I have a work around I use until I find a solution to this problem of permanent

  Thanks for your help and for taking the time to answer!

  I hope this can help someone else in the future

• Problems with different e-mail addresses and the different Apple ID

  Hi, I have some problems with the different Apple ID and e-mail addresses connected to them, and I hope someone can help me in what to do.

  First a primer on my Apple ID

  ***@me.com - it's my account General iCloud (backup, iMessage, Facetime etc.).

  ***@losmail.no - my iTunes/App account (purchase and download music, app, etc..)

  ***@me.com: I have no problem connecting to this account (appleid.apple.com, iCloud.com etc etc..)

  ***@losmail.no: I have no problem connecting to this account in iTunes/App Store. However, I can not connect on appleid.apple.com with this account because he asked me to check the email address. However, this e-mail address use a messaging service that doesn't work anymore, so I can't check it out. Because it is a private messaging service, I want to change the Apple ID on my account @gmail.com.

  I believe, however, that the account @gmail.com has been connected to the account @losmail.no because I received my shopping etc. of my account @losmail.no sent to ***@gmail.com. These recipes also "Apple ID: * @gmail.com. When I connect to the account, however, use ***@losmail.no. However, an I said, I want to log on by using ***@gmail.com.

  What is strange is that in iTunes / App Store, I can connect with ***@gmail.com. However, this is not the same account as ***@losmail.noand previous purchases / comments etc. are not available. It's strange because said revenues (Ref. above).

  An other ting that indicates that the Apple ID where I use ***@losmail.no once was connected to ***@gmail.com, is what happens when I try to log in to ***@gmail.com to appleid.apple.com. Then, I get a message saying that the e-mail address must be verified. I can write the code sent to the ***@gmaiI.com, but it is said then that this e-mail address is already is used by another Apple ID, so it cannot be verified.

  So I guess my question is, basically, how I can change the ID of the ***@losmail.no to ***@gmail.com Apple when I can't access the account losmail, but the appleid.apple.com tells me that I need to check this email address.

  Best regards

  Philippe

  Hi phillla,

  Thanks for all the details with your accounts.

  Can be difficult to have more than one Apple with several e-mails all mixed together.  If an email is used with another Apple ID, for example, that e-mail can be used to create a new Apple ID or rename an old.

  The analysis of what you seem to have however...

  Your purchases are with your *@losmail.no Apple ID, but the emails for this go to your *@gmail.com email address.

  *@gmail.com is the primary e-mail address for your Apple ID *@losmail.no.

  You can connect to iTunes or manage your page ID with *@gmail.com Apple says it's an Apple ID on its own.  As an email address can only be verified for an Apple ID, which means that he must check with your *@losmail.no Apple ID and cannot be verified with *@gmail.com.

  You say you can not connect on appleid.apple.com with *@losmail.no you will need to check the email address.  You have a relief attached to this ID e-mail? This is the email that would be used to recover.   You receive your check or reset email - Apple Support

  Bottom line, you want to change your primary Apple ID but outdated to *@losmail.no to *@gmail.com, you must first rename *@gmail.com to something else and delete this email of all codes from Apple as well.  Then follow the link above to get access to *@losmail.no and control so that you can rename it.

  Best regards.

• Problems with Windows 10 screen standby and sleep mode

  After downloading 10 Windows on my desktop all-in-one HP, I have problems with the display of standby and sleep mode.  When the computer turns off, he doesn't have the bright screen.

  After the upgrade to Windows 10, some laptops have experienced one or more of the following symptoms:

  • > Power LED remains lit after stopping
  • > Computer enters standby or hibernation.

  HP recommends that customers see these symptoms first update the graphics drivers by removing and then reinstalling the hardware in Device Manager.

  See the section updating the graphics driver from where can I find drivers Windows 10 and software for my model?

• I have a problem with the Narrator, repeating words and phrases.

  original title: NARRATOR in WIN7 SUPPORT

  I use windows7.  The annoying Narrator sometimes voices repeat words and phrases.  I also need help, change of voice and using Narrator to read aloud my text book I downloaded.  It is in PDF format.

  Original title: Narrator sometimes repeat words and phrases

  Hello

  Thanks for posting your query in the Microsoft Community.

  You have a problem with the Narrator, repeat words and phrases. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

  Please answer these questions-

  (1) exactly where you run the Narrator?

  (2) the Narrator extends from a particular document?

  (3) have you made changes on the computer before the show?

  I would like more information about the issue.

  Method-

  I wish that return you the items for assistance-

  Narrator doesn't read what I expect him

  http://Windows.Microsoft.com/en-us/Windows7/Narrator-doesn

  Hear text read aloud with Narrator

  http://Windows.Microsoft.com/en-us/Windows7/hear-text-read-aloud-with-Narrator

  Let us know if you need assistance regarding the issue. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

  Thank you.

• If win 2003 is upgraded for the 2008 edition, it will fix alingment compensate for the problem with the SAN disks?

  If win 2003 is upgraded for the 2008 edition, it will fix alingment compensate for the problem with the SAN disks?

  Hi elvirkaric,

  Your question in Windows Server 2008 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/threads

• I added my e-mail account current and most often used, but has any of my files from this account and any unwanted file.

  * Original title: e-mail files

  I just got my new computer with win10. I added my e-mail account current and most often used, but has any of my files from this account and any unwanted file. These files can be added?

  You cannot add folders to the Mail App. I suggest you to install an e-mail client. I use Thunderbird myself.

  Top 11 programs free email for Windows
  http://email.about.com/od/windowsemailclients/TP/free_email_prog.htm

• Problems with UAC, Sims 3 downloader and original windows

  Problems with UAC, Sims 3 downloader and original windows

  I have windows Vista and have been using it for a while to play the sims 3 and download games via original EA downloader/store.  I had run a windows update and an original updated in the last days and therefore my sims 3 expansion packs ceased to operate.  I uninstalled all and have reinstalled the original game of the downloader of origin and now when I try to download my expansion packs I get an error message saying that windows has prevented the application creates a download directory, please accept the UAC prompt to start to download this game.  I approved the promt and they have same message came still high and so I disabled UAC altogether and still got the same error message, I looked on the EA forums and the only line I can find of them our it may be a windows problem (which I doubt)?  Can you help me?

  Hello

  Method 1:
  Right click on all of the files and select run as administrator and try to install it.

  Method 2:

  You can try creating a new user account.
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Note: select the Administration option while creating a user account

  Method 3:

  You try to run the system restore at the same time that it worked very well.
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  I hope this helps. Get back to us with results

• Install KB3024777 to fix a problem with KB3004394 on Windows 7 and Windows Server 2008 R2 now not authentic

  Separated from this thread.

  Joachim

  When first pose the problem? Was it before or after the December updates?

  KB3004394 and KB3024777 appear in view update history? Or do they appear in installed updates?

  Gerry, thanks for your post. I have the same problem as Joachim started this thread. I am running Windows 7 sp1. I have a Dell computer and it's certainly a legitimate copy of Windows (confirmed computer 'properties' and it is enabled).

  By your post, I saw just to update and the KB3004394 (installed on 12/10/2014) and KB3024777 (installed on 12/12/2014) show as comfortable. I usually leave the Windows download updates automatically and I install them to stop. I watched the second update and according to Microsoft.com:

  Install KB3024777 to fix a problem with KB3004394 on Windows 7 and Windows Server 2008 R2

  The KB 3004394 update which was dated December 10, 2014 can cause additional problems on computers that run Windows 7 Service Pack 1 (SP1) and Windows Server 2008 R2 SP1. This includes the inability to install future updates. This new update is available to remove KB 3004394 from your computer.

  My problem is, as of today 14/12/2014, I still get the pop up "this computer is running not windows genuine', even with KB3024777 installed.

  Any thoughts?

  Thank you

  Bob C

  Right-click on CMD

  Click on run as administrator

  At the command prompt, type the following commands:

  slmgr.vbs - ipk xxxx-xxxx-xxxx-xxxx (to replace the specified in the current product key)

  xxxx-xxxx-xxxx-xxxx - represents your product key

  Press enter on your keyboard

  Then type: slmgr.vbs - ato (this will force the activation)

  Leave the command prompt

  Restart your computer