Freeplay on the screen - Sat M30x

Similar Questions

• Satellite M30X-115: I need to replace the screen

  Hello

  I need to replace the screen on my laptop but I can't find references one is on. Is it possible to have this references or references to a compatible standard model and of course, an easy to find the object: o)
  Thanks for the help of the Tower

  Hello

  As far as I know the Satellite M30X was delivered with a screen 15.4 "(1280 x 800) view wide TFT color display."

  Only the dimensions of the screen are important. So if you want you can search a 15.4 "display.
  By the way; the display is one of the most expensive parts of laptop. Perhaps a second hand M30X, or a display of second hand would be a better solution as to buy a new screen for around $ 300.

  Greetings

• Sat Pro 4270: Small lines and shades of colors on the screen

  Model: Satellite pro 4270
  Problem: Fading of colors making vertikal lines (sometimes horizontal. Espacially Fotos are not well seen. Text is no problem and the laptop is still usable. The lines are a little wobbly: get shorter and longer.
  I tried a lot of things: it seams to have nothing to do with the o/s, cause I used Win 2000, XP, and Linux.
  When I use an external display I have no problem.
  I have the actual BIOS on the Toshiba WEB Site.
  Pressing on the screen does not change.

  Someone at - it an idea? (And sorry for my English!)

  For me, it looks like you have a problem with your graphics card.

• Recently installed SSD, the left hand (the back of the screen) HOT

  So I recently installed an SSD in the iMac.But that I do not have a temperature sensor to be installed on the SSD.

  Spec as follow

  

  Ive been doing some research online and people said to avoid this direction fan / running on Full constantly to install SSD Fan Control, which i have and the fan became silent again.

  How ever look at the screen, if I put my hand up to left (rear panel) it seems to be real hot where the inverter card is I think?

  -What is normal?

  I've included some photos of SSD Fan Control temperature readings (SSD temp must be SATA as there is no sensor on it)

  

  I can't give you a reading temp of the left rear of the screen.

  Any information that would be great.

  Very simple, you must contact OWC (www.macsales.com) by phone and ask about their temperature sensor cable. You need to then open up and install the cable. Otherwise, your computer may overheat and cook something.

• Toshiba KIRA-102 with dust inside the screen

  Hello

  Big disapointement! It's my 4th Toshiba (first back in 1997... and still works!)
  My Satellite M30X with 10 years (ok) and my Tecra R840 with 3 years works 24 hours a day from the last August :-)

  The las one... a 102 Kira bought las November!
  Never had this problem: a task of dust about an inch or two the upper of the screen... but inside the screen!

  Now what?
  It's really annoying because it's the perfect... Toshiba advertising ultrabook!

  Paulo

  Hello

  To be honest, I never read on the problems of dust inside the display area.
  However, the mentioned absence looks like hardware related issue with material in question must be reported to the Toshiba authorized service provider in your country.

  In my opinion you should talk to the ASP guys on this problem of dust and probably they will replace the display panel

  On this page you will find all the Toshiba ASP available worldwide:
  http://www.Toshiba.EU/innovation/generic/ASP_SUPPORT/

• Problem of backlight Satellite Pro L10 - the screen is very dark

  Hello

  I've got a L10 Pro of the Satellite with a backlight problem - the screen is very dark.
  How can I confirm if it is the backlight themselves who have failed or the backlight inverter Board?

  Also, can someone point me in the right direction for a copy of the workshop manual?

  Thank you very much!

  Hello

  As you have said that this problem could be linked to the failure of inverter FL and in most cases, the FL inverter needs to be replaced.
  It's a little bit complicated and it s not desirable to try to replace it to your own hand as this may damage the screen of laptop computers.
  This is why I would really recommend contacting a Toshiba ASP because of two important reasons:
  First reason is that you can order the ASP compatible FL inverter and the second reason is that an ASP could provide help how to replace this part.

  If you want to know where and how he placed s then you can visit this page:
  http://www.irisvista.com/tech/laptops/Toshiba-Satellite-A105/remove-replace-LCD-screen-1.htm

  Of course, this page shows only the wow of instruction to remove and replace the Satellite A105 FL inverter, but the procedure is not very different from the Sat L10.

  But like I said above; If you have no experience don t do anything, which could damage the laptop!

• Tecra A2: Automatic change of the resolution of the screen

  I use a Tecra A2 with an external 17 '' TFT Phillips, connected via the Toshiba docking station.

  TFT works best with a resolution of 1280 x 1024 - 1024 x 768 only supports the computer screen. I spent a lot of time, try to configure the integrated Intel 82852/82855 GM/GME Graphics Controller to automatically select the external screen when connected, otherwise use the screen of the laptop. I can get both use the same resolution (1024 x 768), but makes the screen external look terrible!

  This feature was present in my Sat Pro 6000 - but now that I have moved upward at a Tecra, I seem to have lost it?

  Any help would be greatly appreciated.

  Hello

  AFAIK the Tecra A2 takes care of max 1024 x 768 resolutions and it s not possible to increase it. Well, you said that your screen looks terrible with 1024 px external.
  I guess that the display looks like fuzzy. It of normal because the standard resolution for this monitor is 1280 x 1024.
  Well, unfortunately you have to use this resolution if you want to have a clear display resolution.

• Satellite A100 - 02 M - cannot find the correct SATA driver

  Hello

  I have an old laptop Toshiba Satellite running Vista Home Edition.
  I would like to downgrade this machine to work with the XP operating system.

  I have a real, but rather old, CD Windows XP Pro SP1. I also have XP Sp2 and SP3 downloads.
  I searched the web and understand that I need to download the final medium of Storage Manager XP9 Intel (Matrix)

  Package from your webpage.at http://pc-support.toshiba-europe.com/drivers/.
  I have visited this Web page and downloaded the XP drivers for the laptop.

  However, I am unable to find (or determine) the subfolder Chipset appropriate to the F6flpy directory, I have
  understanding would allow me to add a storage from a floppy driver.
  To be honest, I'm not sure how to proceed here!

  Details of the laptop: Satellite A100 - 02 M
  Model No. : PSAANE-04U03EEN
  Serial No.: 64Q 372 464

  Before I try to run the upgrade, I wanted to make sure that if everything goes wrong, I could go back to Vista.
  Therefore, before you start, I tried to run the program of re - install. I pressed F8 during startup, as
  educated and after entering username and password have reached the screen offering me options. I tried the "Restore to an earlier Date" option and that works well. However, when I try the "reinstall the OS", nothing happens.

  I checked the HD that is partitioned with the C partition and also the hidden partition, size 1.5 G labeled 'Simple Basic', 'in good condition (EISA Configuration)'; the other partition is labeled NTFS. As far as I can remember, when I asked John Lewis, when I bought the PC, they said that there is no backup discs.

  You have any suggestions.

  Thank you very much in advance for any help.
  HJBbradders

  Hello

  I put t know if this will help but check it please http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=35787&tstart=0
  Check the s display Niko and try to use the SATA drivers you can download from here.

  If it will not hep let us know.

• Satellite P300 - 20 H refresh the screen every 10 minutes and turn off during 3 sec

  Hey,.

  Basically, I bought my P300 Sat about a month previously and each time it runs, battery, the same error will occur...
  It will update the screen every 10 minutes or more and turn off for 2-3 seconds.

  This isn't a big problem, but it is annoying that I can not sort.
  I tried to run a check of problem to find a solution, but he says that he can not find a.

  Help, please
  Thank you.

  Hello!

  Can you please explain what you mean with refresh? And what exactly is happening?

  It is not easy to say what the reason is for this, but have tested an external monitor on the laptop? And you can determine if it s a problem with the internal display or not.

  In addition, you must make sure that you have installed the latest display driver and BIOS. The two you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  If you installed a display driver Toshiba not you should remove it. These display drivers can often cause problems and don t have protection against overheating.

  Good bye

• M40-285: very low contrast on the screen

  Hello;

  I have a new M40-285, and I found the screen with very little contrast. It always happens, even in the BIOS screen.

  On the lower side of the window, there is always a Flash of light, the background is never 'black', more like a gray.

  I got a M30X and the screen was crisp and Nice. That was the reason on the purchase of an M40.

  The laptop is brand new, I ask for a replacement, or something usual in this model? As I said, M30X screen was wonderful!

  Best regards.

  Hi Fran

  Satellite M40 is well-known for me because one of my friends has a. I can't really understand what exactly is going on with your laptop but try it please use the FN + F7 key combination to set the brightness of the screen up.

  If you are not satisfied, please contact your local dealer and check with him. M40 is a very nice unit with a fantastic design and I believe that there is no hardware problem, just a few bad display setting.

  Good bye

• Qosmio X 300 - 14 p: problems of graphics card and the vertical stripes on the screen

  Hello

  2 days, after a long session laptop in many hours a lot, all of a sudden after the game for 2 hours
  Patrician 4 addon, it crushed in a strange and never seen before in a way:

  The screen would show the strange and weird color under all its forms rushing on ther display. You can't recognize anything, and after a few seconds of this screen and the x 300 - 14 p completely froze / crashed (hung - no reaction on anything except power plug pull or pressure on the button 5 seconds walk / stop ther).

  I was scared because it looked like to me a serious problem of graphics (nvidia chip) card or display.

  I was hoping it was because of the heat (even if I have a powerful block of cooling below the laptop and the heat shouldn't be a problem).

  Next day (yesterday), I launched the game immediately after the start, and after a few seconds the same crash appeared again with the same strange video glitches (never seen anything strange like this before).

  I immediately made the 5 second power button press reset. and then, when the first splash screen appears (the bios display indicator and the loading/splash screen), there was like 2-7 white stripes vertical (on black background) on the right side of the screen.
  They would not move or go away.

  I immediately turned off the laptop and it is off since then.

  For me this looks really serious, as if each chip nvidia (Geforce 9800 GTX) is broken or the display.

  Someone knows something about it?
  Everyone knows about this problem?
  Who knows more?

  I know, I can now connect an external monitor.
  If there is no problem, this should mean that it is a x 300 display problem

  If the problem also appears on the external monitor, the nvidia gpu chip. At least that would be my guess.

  Anyone have an idea about it, what it might be and what I could do?

  (I'm afraid to send him only the x 300 in to toshiba for fixing is not worth, because it's quite old)
  (it was purchased new in June 2009). fixing, it is probably too expensive.

  Any ideas on HCet problem?
  I've never had before.
  Who can help?

  Thank you

  PS:
  I was thinlking to buy the new qosmio X 870, but I just saw that there is no express card slot, I need for different expansion modules (like the tv and video equipment, more etc.pp cards e-sata).

  Without an express card slot I would not buy any laptop computer, I need urgently this slot machine (it's like a pci-express slot card connection in a desktop pc).

  For me the express card slot is vital.
  Never saw so many bad books.

  If io may need my x 300 for quite awhile,
  But what I would do abpout this weird new chip/video display problem?

  Hello

  I agree with you that it looks like a GPU problem.
  This means that it is the worst case, because in most cases the motherboard needs to be replaced
  Even if the GPU would be replaceable, this piece would be very expensive
  However, you can get in touch with a local ASP from Toshiba and can ask how it is

  Good luck

• The screen on the Satellite A100-163 changed 180 degrees.

  The screen on my Satellite A100 - 163 has flipped 180 degrees. The cat sat on the keyboard, so I guess that a combination of keys it will sort! I tried ctrl-stift-r as suggested in a previous message, but nothing helped.

  Any suggestions?

  Hi Stephanie

  Please check the settings of graphics card. I put t know what graphics card your device but I noticed that the units with Intel graphics card have this office turn option and you can change it manually in the properties.

  Good bye

• Re: L505 does not work after replacing the screen

  I had to replace the display screen on my Satellite L505 due to the 'accident '. After finding how to get instructions on the line, I was able to do the job, seemed ok, but it having moved up the screen on, but nothing else. When replacing at any time I felt an electric shock, so I do not think that the fried motherboard. He would have anyway? If this isn't the case, motherboard, would this inverter replacement needs. The accident was due to a piece of hardware that was sitting on the keyboard when my dog (the awkward beast) sat down on my satellite (I used it in his bed), the screen cracking. Help would be appreciated knowing what it could be.
  Thank you

  Hello

  I don't think that someone will help you in this forum. Who knows what happened... You must contact the Asp (SAV). Please, please understand me, it's hardware related problem that needs to be diagnosed by special service tools.

• Pavilion HP14-F1027C: Touchscreen begins to tap the lower left corner on the screen

  Touch screen starts tapping lower left on the screen and would not stop. It starts after 5 minutes. Had to hold the power button to stop it. A ran the microsoft malicious programs. Nothing found.

  Found via MS notes on any issues in registry problems that back suggested in the previous period.

  I ran the recovery back 2 Manager updated to 15/01/2016 sessions. The problem has been resolved.

  Then, I sat with her through all the update processes to ensure that there is no problem update with each of them.

  It's now works fine with no error touchscreen on the uptates later for 15/02/2016.

• my Windows xp pro computer was working fine, but after five days, when I stat from my computer I could show only the information of the bios on the screen and then the screen freezes

  my Windows xp pro computer worked fine but after five days, when I stat my computer I could show only the bios information on the screen then the screen freezes, then I started ahead of time the computer starts at mode, but once again he the disply frozen. I couldn't start my computer. I have a lot of data in my hard drive. What can I do to start computer or recover my data?

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if your one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors, then your RAM is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Test your player - create a Bootable CD:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective.
  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  J W Stuart: http://www.pagestart.com