Freezing of L650 - 1 k 5 satellite when the charger is connected

Hello

I just bought a Toshiba L650 - 1 k 5 in a store of Toshiba with no OS on it. I put on a Windows 7 Professional X 64 purchased, legal with all toshiba drivers necessary. It was a week ago.
There are a few days that the laptop has begun to freeze for no reason but only when the charger is connected. It was freezing with no runnig software, all of a sudden, when I went to the control panel and device control a yellow triangle were shown, but when I clicked on the failure notice it did not show anything a few clicks later, it showed that something wrong with one of the PnP devices, but none has been mentioned. I installed sp1 and a couple of drivers from Toshiba Web site and the machine still keeps freezing with no reason, especially when the charger is plugged?

What is going on? Should I put a x 32 windows 7 on or what?

Thank you

Tomo

Hey Buddy,

I don t think that the 64 bit version of Windows 7 is the problem: is IT s software/driver related hardware problem or problem, but it is not easy to say because your computer laptop wasn t equipped with operating system preinstalled so you can t test with the factory settings.

What you can try is reinstalling Windows 7 new with all the drivers prétestées on official website of Toshiba. Then, make sure the Device Manager shows no yellow exclamation more and test again the situation as a whole.

If the same error, it seems to be a hardware malfunction and an authorized service provider can help you get rid of this.

Tags: Toshiba

Similar Questions

  • Randomly, the screen is blank when the charger is connected; generally very well during the execution of a battery

    We have a Dell Inspiron 6400 laptop.  When the charger is connected the screen will become black suddenly, and you can't seem to get the screen goes again.  It does not seem to close completely because when I press the power button twice (or more?) it brings back me to the password screen.

    This only occurs when you run the battery, IE. not connected charger.  I bought a new charger thinking that was the problem, but the same thing with the new charger.

    My only thought is that it could be the battery but unwilling to spend £60 on a new if it does not solve the problem.  And also the battery OK charges when the laptop is not activated.

    Help needed please!  Thank you very much.

    Hi Tiffany - Sorry a very very late thank you for your help on this.

    I've been very busy and have therefore been put off watching it.  We have been surviving off the battery and when he runs out to paralyze the system / sleep mode and reload.  It became quite frustrating and that's why I've decided that I really need to fix this problem.

    As you the advised, I went just through the safe mode and the problem occurred again glancing at your advice it seems there must be a hardware problem.  I had originally bought a spare power outlet, and this does not work then maybe it's the battery.  As you suggested, maybe a qualified support store is the best solution now.

    Thank you once more!  I am very grateful.

  • laptop computer becomes slow after a while of use and when the charger is connected, becomes normal.

    Hello

    I use HP Compaq Presario CQ62, Windows 7 Ultimate 32 bit OS, 4 GB ram, Intel core i5 processor. It is a portable 4 year old. The battery was changed 8 months ago.

    Now, coming to the problem, my laptop will work very well for a few minutes at the start when I turn it on. After some time, the laptop everything becomes so slow it takes forever to work. This occurs when the power is not connected. If I connect power, less than a minute it starts to work faster. But the laptop would become very hot.

    This problem started when I updated my iPod. After update iPod, I had this problem even while the charger is plugged. Later, I changed the OS Win7 Home premium genuine to Win 7 Ultimate. (Pirates). I have run the genuine Antivirus, cleaned the registry and everything. The problem persists. Please help me with this topic.

    Thanks in advance

    -Kere

    kaaranjikere,

    So I checked the error you are getting, and it is not the battery do not, it is the power which is a failure and that includes everything for the power.

    So it is likely that something wrong with your motherboard.

    You will need to take the system to someone looking over everything.

    I would like to know how everything goes

    Nice day.

  • (Redirected) REFERENCE DELL TOUCHPAD NOT WORKING NOT PROPERLY WHEN THE CHARGER IS CONNECTED

    When I plugged my inspiron Dell5050 the touchpad is not working properly. After removing the charger, the touchpad works properly. I restore my system, open in safe mode, digonsis the system, but it has not helped me.

    Hi dkydell.

    Go to your profile and change your user name. We are not allowed to use Dell as our username.

    Please repost this in the laptop computer forum for interventions.

    http://en.community.Dell.com/support-forums/laptop/

  • Battery indicator LED of DELL 15R 5537 (i5 6 GB 500 GB Touch WIN8) no light upward when the charger is connected

    Hello

    I just got a Dell 15R 5537 (on September 29, 2014) and when the laptop is turned on or off, the led on the front of the PC does not illuminate. What is the problem? should I get it replaced?

    Jason

    Hi Jason,

    The following led lights only when the AC adapter is connected to the system and is in charge of the battery.

    If the light is not lit when the AC adapter is connected to the system then I suggest you try to Flash the BIOS of the system. Please enter your service tag # on the link below, select the operating system and then download the BIOS from the system BIOS section and install it.

    Please let me know if it helps.

  • EasyNote tj65 makes noises when the charger is connected

    Original title: easynote tj65 annoying when noise plug charger

    According to the title, anyone know how to disable?

    Hello

    1. Since when you are facing this problem?

    2. have you received a notification, to consider replacing your battery?

    3. have you made changes on the computer before this problem?

    I suggest you follow the steps.

    Turn off the PC speakers and check if it helps.

    (a) right click on its icon in the taskbar and go to playback devices.

    (b) select the speaker , and then click Properties.

    (c) go to the levels taband Mute (or you can reduce it) PC speaker and check.

    If you still hear the noise, I suggest you to contact the manufacturer of the computer as it might be the problem with the charger.

  • Sansa Clip 2 GB shows "Connected" when the charger is plugged

    I have a Sansa Clip 2 GB is around the age of 6 months.  He played very well for 5 months, but for the last month, he periodically left the game and shows 'Connected' when the charger is connected.  I can sometimes turn off and on and it will start working again.  He will play for awhile, sometimes minutes, sometimes a few days and then stop playing again and see the "connected".  When he is in this state it will load but not play.  I tried 3 different Chargers and all have the same problem later.  I updated the firmware of 01.01.32 but no help.

    Someone knows how to fix this?  TIA for any help.

    OK, here is the last, this problem is resolved, but he caused a new sorta related problem.  What I did I deleted all my files and just put all the songs in the Music"" folder.  This seems to have solved the problem where it says 'connected' and stop playing, however, now it plays a day or two and then stops himself.  I just press 'Play' and he starts going again, so it is not much more than an annoyance I can live with that, and I could see where maybe he could do so on purpose after she played all the songs, but why it not it that way when I got it?  He played continuously day and night for months as a first step.  I'm confused, but I can at least live with the Clip now.

  • Internal speakers work but no sound when the headphones are connected.

    Internal speakers work, but no sound when the headset is connected Mr. fix gives a clean and level flight controlpannel indicator report / sound show sounds present but no sound on 3.5 mm jack audio 6.0 vista Home Basic travel mate acer 2480 laptop.

    Ive seen to be a common problem and have tried everything short of putting my computer or the cabel in the freezer for this problem, although I had an old pair of computer speakers that the power of the headphone plug in my garage-30 and a jack 3.5 cold didn't help.

    Most recent driver realtek audio and Manager running audio acer, everything seems fine all levels on and not cut anything off
    Lists of control pannel/sound/speakerproperties
    control information
    Realtek High Denifnition
    Reatek'a

    Jack information
    LR ATAPI internal ATAPI
    LR 3.5 mm Jack (will disappear if not plugged headphones\auxcabel)

    some levels are muted
    Advance tab default settings
    quality of studio 24 bit 48000 Hz

    boxes of exclusive mode checked (when it is disabled, that no sound was heard)

    Information appears a jack was pluged into and when unplugged.

    the computer knows its their and it shows his work but ive tried several pairs of headphones, including the new ipod with the remote, I tried an old pair of speakers that have no other energy source that 3.5 mm cord all work witch on my i pod, I also tried pluging in a splitter first and also an adapter to use a guitar cord pluged amp in an another apapter back down to 3.5 mm a little stupid and redundant but I didn't lie when I said I TRIED EVERYTHING I could think maximum\ read forums\ many watch on youtube.

    computer repair guy told me that fault call manufacturing equipment but guaranteed was 2 weeks upwards.
     
    I do not think it is a matter of hardwear tho and am convinced that it can be resolved is so close to work, I'm sure there must be a setting or patch or codec sumthing that will correct the problem, but it's my first (LIRA) ask for help.

    With frequent this problem or other similar appear from what my research has shown that I don't know that it can be resolved, or millions of laptops with drivers realtek audio hd are all defective.

    My next try is an external usb sound card. I tried already but no stores in my area have them (Wal-Mart, the source, Staples), all had never heard what I was talking about. I saw on the web less than 5 dollars but have no confidence in the sites offering the devices. Has anyone bought from a trusted site.  could talk to the teak of microsoft but they wanted to charge me $ $50 so decided to save money to buy a card usb sound, if I can't solve the problem.

    Sorry for any ignorance or typos and long reading but I hope someone can help with this problem

    Check with the manufacturer of your system's support and their forums (if any).

    Have you checked on the website of the manufacturer of the device for the latest drivers?

    Realtek - HD Audio Codec Driver right side
    http://www.Realtek.com.tw/

    Download - SAVE - will click with the button straight on and RUN AS ADMIN

    NOTE: Often restore audio drivers to check the version after installing and restarting is
    see if the version you have installed is there, otherwise repeat the installation - restart until it is. This may take
    several tests according to the recommitments how much he makes.

    Rob - bicycle - Mark Twain said it is good.

  • MacBook randomly landed volume when the headphones are connected.

    Hey,.

    There is something wrong with my MacBook. When I plug my headphones, the Mac randomly landed the volume at any time. I thought the keyboard can be broken, but it doesn't happen when the headphones are connected so it may be a problem with the software (I think?). Has anyone experienced the same problem? Do you know how to fix this?

    My Mac is the MacBook Pro 15 "retina (mid-2014) running the El Capitan 10.11.6

    Please try resetting the memory NVRAM and SMC.

    Reset the NVRAM/PRAM memory.  http://support.Apple.com/kb/PH18761

    Reset the SMC. Choose the method for "If the battery is good behaviour."

    https://support.Apple.com/en-us/HT201295

  • Is it possible to cut all the sounds and haptic feedback when the iPhone is connected to Carplay Apple?

    Is it possible to cut all the sounds and haptic feedback when the iPhone is connected to Carplay Apple?

    While driving, I noticed that all the comments navigation are also sent to my phone, creating a distraction while driving. Is there an automatic way to stop sending alerts to my watch whil the iPhone is also connected to Carplay?

    If this is not the case, consider this as your comments/request. If there is, please share. I do not want to switch manually and on all notifications when you use Carplay.

    Best regards

    Q

    Hello

    It may help to place your watch in mode do not disturb before driving:

    -On your watch: when the time display, drag upward on the dial of the watch > drag left/right to the gaze of settings > tap the moon to turn do not disturb on and outside.

    You can also disable mirroring for do not disturb mode. When mirroring is enabled, turning on do not disturb on your watch also automatically her allow on your iPhone.

    -On your iPhone, in the application of Eve, go to: Watch My > General > do not disturb - turn the market / stop iPhone mirror.

    To send comments and/or service requests to Apple, you can submit the form here (all comments are read):

    https://www.Apple.com/feedback/watch.html

    (This is a supportive community focused on user - you don't talk to Apple here).

  • don't want itunes to automatically start when the ipod is connected to the pc

    How can I prevent itunes from automatically launching when the ipod shuffle is connected or when the pc starts?

    Open iTunes, go in Edition > Preferences > devices and place the check mark to prevent sync automatically when the device is connected.

  • HP ENVY x 360-15-w100nt: wi - fi connection slows down when the charger is not plugged

    Hello

    My wi - fi connection slows down when the charger is not plugged in. Correct the wireless lan drivers. So far, I appreciate all kinds of advice for this problem.

    Thanks in advance

    Hello @JohannNewma,

    Welcome to the HP support community! I read your post and wanted to tender hand can help you!

    I understand that you notice a decrease in speed wireless on the x 360-15-w100nt laptop computer ENVY when running off the battery voltage.

    You can check and adjust the power options on the system as it is probably trying to save battery power by reducing wireless performance.

    If you're still having problems, you can follow the steps described in this document to troubleshoot the network settings and internet wireless.

    Please get back to me how that happens. To show that you like, or are grateful for my post, please click the Thumbs up below.

    Thank you!

  • Pavilion 17-f113dx: Internet becomes slow when the charger is unplugged

    Hi all

    I have a problem with Internet on my computer whenever I unplug the charger internet connection goes down, I need to plug back in so I can use internet properly. The question began only a few days when windows update prompted me to install the new drivers wifi. My laptop is a HP Pavilion f113dx 17.

    Hope someone can help, thank you. Nice day.

    @Albie08

    Welcome to the Community Forum of HP.

    It's unfortunate - both drivers Wireless illustrated the State of your laptop Driver Support page specfically this version should improve (and certainly not degrade) performance.

    Ideas

    ---------------------------------------------------------------------------------

    Assuming that you have chosen to create a Restore Point before you make these changes to your computer, you can easily "pass in time" from before the last set of updates have been installed.

    Using Microsoft System Restore (Windows 8)

    ---------------------------------------------------------------------------------

    Use your Recovery Manager to install the original Wireless driver that was preinstalled on your computer, while he was 'new ':

    This document explains how to reinstall hardware drivers and software that were originally installed on the computer at the factory.

    Using Recovery Manager to restore the software and drivers (Windows 8)

    ---------------------------------------------------------------------------------

    Boost the signal on your network wireless when running on the battery.

    See

    Parameters to improve wireless connectivity

    Section:

    Laptop wireless hesitates or does not work when executing a stack

    ---------------------------------------------------------------------------------

    For later - you must let not updates sneak up on you - or allow automatic updates to update the system without having you the time to decide whether it is convenient or critical the right time for this task.

    Updates - when and how

    When you see a post that will help you,

    Who inspires you, gives a cool idea,

    Or you learn something new.

    Click the 'Thumbs Up' Kudos on this post.

    Click on accept as Solution when my answer provides a fix or a workaround!

  • G42-461TU: Laptop hangs when the charger is not connected in

    Hi all

    I use HP G42 - 461TU Notebook.I have a problem with my laptop. He often gets crash when the load increases. Once when the charger is plugged in, it works fine. But when the charger is disconnected, it gets even once block. I thought it might be due to problem of memory and I added extra 2 GB DDR3 RAM too (totally 4 GB now), but the problem persists. Now I use windows OS 10, but I faced this problem with windows 7 too. Can someone please help me diagnose the problem with my laptop? Thanks in advance!

    Hi @Dinesh_R,

    Welcome to the HP Forums! I read your post and wanted to help.

    I understand that your notebook crashes when the charger is not connected. You can start with this document: computers HP - computer is slow (10 Windows)

    Let me know if that helps the problem.

    If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

    Kind regards

  • HP HDX 18 - Win 7 Home Premium (64-bit) CPU is palpable when the charger is removed from the laptop/notebook computer

    I currently have a problem where my CPU stands at 90% to 100% when the charger is removed from the laptop. He immediately rises despite no process running. When the charger is placed back in the CPU of the laptop is usually highest at 2%-5%.

    The operating system is Win 7 Home Premium (64-bit).

    Corrections or suggestions would be very appreciated.

    SOLVED

    Go to control panel > hardware and audio > power options > change settings > change advance power settings > managent processor power > political cooling system > set to battery for 'Active' option if it is selected as a liability.

    sas84_HeavyHitR wrote:

    I currently have a problem where my CPU stands at 90% to 100% when the charger is removed from the laptop. He immediately rises despite no process running. When the charger is placed back in the CPU of the laptop is usually highest at 2%-5%.

    The operating system is Win 7 Home Premium (64-bit).

    Corrections or suggestions would be very appreciated.

Maybe you are looking for

  • Suddenly, I got an error directly under the normal pane display area. How can I get rid of this

    I have a sidebar with bookmarks, then the add-on of the tree Style tabs in a sidebar. The right part of the screen was previously dedicated to the active site. Now all of a sudden it was split into 2 horizontal sections - the upper part with the site

  • I can't install OS (Windows 8)

    Hi all! I have a laptop dv6922et HP with core 2 duo t8100, 2 GB of Ram. What I want to do is to install an operating system. I wish to have Windows 8 on it, because this run ok and Xp is outdate *. I have a bootable USB stick with windows 8.Recently,

  • I can't start back to my Mac since Wednesday last week

    I noticed nearly a week there that my mac back was turn off by itself.  I can't restart on one of my two Macs.  Errors are always the same. When I try to turn it on, it gives the message that something is wrong with my account and told me to turn off

  • Questions OR MAX

    Hello I've recently updated to LV2016 and now I have problems when you try to contact the PXI targets from a distance using MAX. PXI targets are listed in "Remote systems" in the window of MAX, but when I click on the arrow down to develop, the usual

  • My phone is showing turn off system with a key 72878151

    My hp pavillion dv6 is showing turn off system with a 72878151 key error please how unlock my mobile