Freezing on the transfer of your media: Clip Zip +.

Similar Questions

• BBM BBM stuck on the transfer of your data from bbm surveys

  Hoping someone has a solution. My jump of BB's stuck on the transfer of your data from bbm surveys. I tried everything I know how to deal with a BB, which is not much. And everytime I open BBM it goes to the spinning wheel and glued on the transfer of your data from bbm surveys.

  Thank you

  DGF

  Hello DGF

  We knew the things you tried to solve this problem?

  Below KB explains on the symptoms of the error when installing BBM, which may apply to your question.

  You must use only mobile data and turn off WiFi when installing BBM surveys. If the problem persists, use a WiFi connection and disable mobile data.

  http://support.BlackBerry.com/kb/articleDetail?articleNumber=000035294&language=English

• Envy 15 freeze on the transfer of data USB 3.0 drive when copying many files

  Thanks in advance.

  My brand new envy 15 (model LW897AV) (15 t-3000 CTO) crashes every time that I try to transfer a lot of files from a Flash DRIVE via the USB ports on the laptop.

  It gets about 5 minutes, then simply hangs. He had done this 7 times now. I got a message on a blue screen BSOD once:

  0xE0010002

  After calling technical support HP and Google search, they think it's a problem with the USB 3.0 controller or something to do with the hibernation mode. I updated the driver for USB 3.0 controller. No joy. Also, I changed the power settings to never Hibernate. Still no solution.

  The USB ports on the left side appear to be able to let go. Next to the USB port is a wireless mouse, and he loses too much power (the Green led turns off). Sometimes the mouse keyboard and the touchpad still works. Other times, everything is frozen.

  I can recreate the problem with two different USB drives. Of course, these USB drives have no problem with either of the readers.

  Help!

  Thank you. -ChipTay

  Hi kstoltz. I have the solution for you.

  Return it. I spent more than 20 hours, sending in the dump and bsod messages files. SUPPORT TECHNIQUE IN THE U.S. WAS AWESOME.

  FAR IS A SUPPORT TECHNIQUE WAS SO PAINFUL THAT I THREW ALMOST THE ENVY 15 IN THE MARINA.

  They said it was a problem with the hardware with USB 3.0 ports and file transfers. There was no trouble, so they have defective only intel chips on motherboards out there.

  I had an Exchange with an upgrade of RAM and processor for my troubles.

  :-)

  I love HP.

• "Sansa Fuze v2 freezes on ' update your media.

  I had this problem since I got it earlier this year.  I tried to solve this problem in many ways.

  First I thought it was a problem to do with the tags which many of you have told me, but after having systematically organize every single audio track, remove all comments, artist information, album art, composer and using mp3val error check each audio track the problem still remains.  The only information on each track are kind, year, song title, artist, album name and track number (this I did on Mp3tag and saved ID3v2.3 ISO-8859-1).

  The sansa fuze that I is a model of v2 4 GB with a MicroSD of Kingston 16 GB card.   Honestly I am so sick of having to choose who I want to because music the largest number of songs I had on it without it freezing songs s 560 - I would add that most are mp3, some are in flac.  It's less than 6 GB on the 20 GB I have available which is ridiculous because the point all I got a rocket was so that I could increase its capacity without having to buy expensive media players

  I have tried updating to the latest firmware but back to 1.02.26 because the problem remains to be 1.02.31.

  Good because it will probably be easier to read and make more sense if I just list this information (instead of try to structure some sort of coherence).

  D ' other information that may be useful, it's that I have no video, no photos.

  -The problem seems to occur after a threshold of the number of songs I have.  For example, when I transfer an album more and it freezes / hangs on the screen "refreshing your media", I have to force it to shut down by pressing the power switch.  Most of you might be thinking that it is again with the offending audio tracks (bad tags etc), however I found that if I remove some albums and try put on the same album, it will be no problem to do.  Only after reaching a certain number (?) of songs that seems to happen.  I'm not going to say as a fact that I'm not 100% sure of that.

  -After the screen "refreshing your media" frozen that I have to go back and remove all of the albums, I added which causes the problem.  This might appear as normal except there is no audio data files just an empty folder with the name of the album.

  -All titles scanned with mp3val as having 'problems', I removed permanently of the device.

  -All the music is transferred in MSC mode - drag and drop

  -It never freezes if I transfer audio files to the internal memory.  For example, the album which causes the freeze/hang up can be placed on the internal memory of sansa fuze - no problem

  For the love of all things good someone can you please help me solve this problem, I'm sure this can be fixed.

  I will update that I can't imagine all the things I've done

  Thank you

  
  

• stuck on "refreshing your media".

  Hi, I just got this yesterday and have had a lot of trouble with it, the software does not install correctly, the device is not recognized. It get stuck on the scene "refreshing your media" - I made a couple of soft resets. but it doesn't seem to work. Can anyone help with this?

  How long took you? It may only appear to be frozen (the progress bar isn't really evolve for as long as it takes to finish properly). What may cause it to take a long time: a large number of files and/or folders, files corrupted and botched the ID3 tags.

  More on tags: when he says "refreshing your media", she does really built a database of all the information contained in the tags (title, artist, album, track number, etc.). The player can choke on messy tags, especially very long comments. For some reason, some people try to put the history of the artist (or some other ridiculously verbose nonsense) in the "Comment" tag The best thing to do is to use a program like MP3Tag (highly recommended and FREE) to clean up tags, deleting the comments and stripping other tags to only the essentials. Any tag editor you use, change the settings to save tags to ID3 v2.3 ISO 8859-1 format, if possible. This format is more compatible with Sansas.

  If your labels are clean and it still freezes, you probably have a corrupt file. To make it easier to isolate the problem, or the files, format the drive (settings > Control Panel menu) and start reloading your files in smaller batches until it crashes again.

• Lost 90% of the music on Windows Media Player

  Yesterday (January 4, 2014), I could download a CD on my laptop - something I've done 1000 times.  The next time I open Windows Media Player, all my music was gone.  I was able to recover a portion of the value of the CD a lot back music - because, the music is always on display as being somewhere in the computer - I saw all the titles I had on WMP in my folder "Music" (in the area of libraries - where you choose if you want that your documents, photos, etc.) and I was able to get some of them to go immediately to WMP , but others wouldn't move - I would like to try to get 'em to move as the others, but for many of them a box pops up and read ' cannot move - this file is already opened in another place "(or something like that) and then I had two things to choose click on -"try again"or"Cancel ".  Anyone else had this happen?  And is anyone know how I can get back my music on my WMP?

  Thank you

  Kmanthie

  Hello

  I suggest to remove the existing library database and then download Windows Media Player for the re - build as follows.

  On the Start Menu, open the control panel and open Folder Options.  Click on the view tab, check the radio button titled "Show hidden files, folders and drives" and out the box "Hide extensions of known file types".  Click on apply to save these changes.

  Click on the Menu start, open the computer, double-click Local disk C, double-click users, double-click on 'your username', double-click AppData, double-click Local, double-click Microsoft , and double-click Media Player.  Delete all files with the extension .wmdb - do not delete all the files.

  Close all open windows.

  Once again, on the Start Menu, open the control panel and open Folder Options.  Click on the view tab, fill in the box labeled "do not show hidden files folders and drives" and enter a check mark in the box "Hide extensions of known file types".  Click on apply to save these changes.

  Now, open Windows Media Player and it will start to rebuild the index of the library - the time required depends on the size of your media collection, but let him finish.

  Kind regards

  DP - K

• Turning off the display in windows media player

  I want to use windows media player and send music to my active bluetooth speaker. The screen saver does not undertake, and I fear that the monitor will be damaged without being turned off or go to the econ. I have a sony vaio e series laptop.

  Thank you

  Modern monitors don't usually suffer from burning in the past, but you can always uncheck this option in the settings of your media player so that it will allow the screen saver to engage.

  

• Work of the trouble on Sansa Clip Zip

  Hi - I have problems with the work on my Sansa Clip Zip.  Work does not show for each song.  For songs ripped in the Zune software will show the work.  However, for the ripped songs in iTunes does not show the work.  I tried to put .jpg files in the folders with the songs, make sure they are of size less than 100 KB and even tried to resize one at 200 x 200 pixels (though the size was too large of pizels overall size was fine).  Any ideas?  Thank you.

  Use 'album art.jpg' (without the quotes and with space, not a line of underscore) or "folder.jpg" (again, without the quotes).

  I'm not 100% sure, but I think .m4a files Apple 'protected '. The Zip will not play them. They would need to be converted to a type of file supported as .aac (Apple DRM-free format) or .mp3 (universal format).

  You can use MP3Tag above (free to download) software to incorporate images of cover art in the "extended" part tag. Note that you need to do this for each (long) file rather than the image one (album art.jpg) for all files in the folder even the opposite effect.

• Clip + hangs on "refreshing your media" once the files have been added

  Hello. Today I bought a Sansa Clip + mp3 player. Its internal memory is 4 GB, so I bought a 32 GB microSD card.

  I put the microSD card and connected the device to the computer. I then transfer a lot of files, mp3, some flac, as I read the Player supports this format.

  By looking at the output during the transfer, I also saw that some JPG files have been transferred. I guess this isn't a big deal, and I still don't think what is causing the problem.

  Now, when I removed the device safely from the computer, it has started to cool off the media and then frozen at 99%.

  I had transferred 11 GB of data, so I guess it will just take some time. I left it there.

  I returned about 45 minutes later, and he was still stuck there. Now, I started to suspect that something is wrong.

  I googled a little and found that maybe I need to reset the device. I did it. I then plugged the device into the computer, with a microSD card still in it.

  Immediately when I plugged it in, it started refreshing media once again. This time, he did not even half of it. He just sat there, stuck on this scene.

  The device was not recognized by the computer. I did the procedure to reset again, and this time removed the microSD card and connected the device to the computer. This time, it worked, and I was able to access the internal memory.

  However, all the files are on the microSD card, and whenever I plug the unit into the machine with the card inserted, I can't access anything whatsoever.

  The device is not yet recognized by the operating system. What can I do? Is it possible to return it?

  My OS is Arch Linux.

  I did a manual update of the firmware from 10.02.18 and even checked in the device.

  How can I fix? It's very frustrating, I feel that I spent money on a useless product.

  After several hours of frustration, I ended up installing a third-party firmware called RockBox.

  The device booted up, even with the microSD card inserted, and I was immediately able to play the files.

  No database has been built. This is the way it should be.

  So, things turned out all right in the end.

  I just think it's a little sad that I had to jailbreak the device to be able to use it for the purpose I bought it for.

  Thanks anyway.

• I get the error message "there was an error of analysis of the data on your system" when you try to use Windows Easy Transfer

  Original title: there was an error of analysis of the data on your system

  I get this error when trying to use Windows Easy Transfer to prepare to move from an XP PC to a Windows 7 PC. It passes through the part of the selection on where I later import files then says he is scanning the disc and fails with the above error.

  In the search for this error, I found information of 2007 could be be a nero problem AVI.  I don't have Nero installed and I can't find the log files in the directory MIGWIZ.

  It is a small (50 GB) HD who do not have much space available on it (I'm not in front of it now).  Is there a minimum amount of free space needed to run this executable? That is why it is a failure?

  Could there be other issues behind this failure?
  Thanks in advance

  Hello

  Follow these methods and check if that helps.

  Method 1:

  I suggest to download from the link provided below windows easy transfer tool and install it and then try to transfer the data back.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transfer

  Method 2:

  Refer to step 2 and step 4 from the link provided below:

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

   

   

  Method 3:

  I recommend you to try different types of transfers using different media. You can also do a disk clean up of the Windows XP computer. Remove unwanted programs from the Windows XP computer. Do a disk clean, right click on the C drive, and then click Properties. Clean, then click on the disc.

  For use with different media windows easy transfer, you can click on this link for steps to follow:

   

  http://Windows.Microsoft.com/en-us/Windows7/transfer-files-and-settings-from-another-computer

   

  http://Windows.Microsoft.com/en-us/Windows7/transferring-files-and-settings-frequently-asked-questions

• How can I transfer video files to the library in windows media player for an external hard drive

  How can I transfer video files to the library in windows media player for an external hard drive. My os is Windows XP Home Edition and I use wmp 11.

  You have to locate the files on your internal hard drive, using the Explorer, then drag and drop them on the hard drive.  If you don't know where they are on your hard drive, right click on the video file in the library and choose the location of the opened file.

• Am I duplicating music clip-zip when I download the entire file of MUSIC from Windows Media?

  On my Zip Clip with a micro 32 card: using Windows Media, I downloaded my whole 'MUSIC' of the file to the device.   Now that I've added more music in my Windows Media MUSIC file, download the entire file again for "updating" of new music, than i've got, or will I be duplicating what was there before?

  It seems terribly painful to have to selectively add new music, checking back & comes to see what is already uploaded on the Clip-Zip.

  If you use the 'sync' feature in WMP, it will add only what is new or changed in your music on your computer folder. Note that this method is a double-edged sword; It will also remove all the files that you may have removed the record music from your computer. This is not a good thing.

• This who should I insert for "installation media" interviewed "load the drivers for your hard disks?

  I am trying to repair my installation of Vista Ultimate 64 bit (my system does not boot into Vista at the moment - something wrong).  I am running the recovery by booting from the Vista installation disc in my CD/DVD drive.  When the System Recovery Options screen appears, there is no operating system is displayed.  I wonder to 'load the drivers for your hard disks' by inserting the installation media.  The wizard goes into a mode of navigation, but I have no idea of what he seeks.  The only drive I've delivered with my hard drive, installed months ago and works well so far, doesn't seem to have the type of the file of the search dialog box.  Please help - what is needed to move forward with this repair? Brett Henrichsen

  Download the SATA drivers:

  http://www.ASUS.com/product.aspx?P_ID=ShiLE9XNeuFKwFDC

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• No sound on media clips on the home page

  Someone please offer some advice.

  I finally got Skype to work.  All say the microphone and speaker systems.

  When I try to play a media clip of my homepage on a story, the video works but there are no sound.

  I tried everything I can think and am at a loss.

  I have a laptop HP pavilion dv6-1245dx entertainment

  Yes!  Your comment made me think and I downloaded several drivers audio and finally found one that worked.  Thank you, thank you.

• Modification of ProRes clips in the timeline, then export > media such as ProRes: fact first re-compress the ProRes clips?

  To clarify: ye olde Final Cut Pro 7, you were editing ProRes clips and then get out a Quicktime with the appropriate settings, it would NOT re - compress the source ProRes, just copy > paste individual images into a new Quicktime (ProRes intra-image).

  In Premiere Pro, it export media in the same way, if your source clips are ProRes and you export a ProRes Quicktime? Or does do a re coverage - compress to ProRes from the timeline to create the new ProRes?

  Thanks in advance for any ideas.

  If you only cut or edit the clip, do any other changes (for example: do not add effects, etc) and then export to the same codec with the clip settings (rate, size of the image, etc.), then Yes. First will be smart make the clip. For the record, once you select the corresponding ProRes codec, you can click on Source corresponds to match the parameters.

  Once you add effects or set up an export setting unmatched (frame rate, etc.), then first you have to re - compress.