Fresh DV8 drains without operating

Similar Questions

• Huge battery with Marshmallow drain. Operating system Android phone sleep never let

  HII all

  I had this problem with lollipop on my Xperia Z5, but it is now still present on my phone after I have updated to the marshmallow.

  My phone has very big battery drain, with the the battery lasts bairly my a full day. Android operating system is almost always one of the highest consumers and is constantly keep the phone awake. I usually get 2-3 hours SOT of a full charge.

  I also find that my old cell consumes a lot of battery and I have the mobile radio active bug that consumes battery too.

  Can someone please help?

  Should I have a defective phone, because these deferred questions of lollipop of Marshmallow? He very poor actulally of Sony to sell a phone for $999AUD and to advertise as being the autonomy of 2 days, when barley of the battery lasts a single day with light use.

  Any suggestions would be greatly welcomed, because I'm almost my wits end with this phone.

  OK, so my use of phone batteries is returned to normal.

  I did some tests and concluded that it must some wakelock which is the origin of my phone to stay awake and goes to sleep. I narrowed down it to 2 things.

  1 Bluetooth: When my phone disconnects my Bluetooth car, I think a wake lock happens and something prevents the phone from sleep and does not go to sleep or doze. A reboot usually solves the problem. But then again, sometimes it don't happen.

  2 uni WiFi. On my Uni WiFi, especially the eduroam network, the phone remains awake too, if I forget the eduroam network (or simply turn off WiFi), and restart the phone, the question is not coming back.

  Im not sure what exactly are the causes them to occur. But I haven't found that one or the other sometimes cause the phone to stay awake. I have slightly more but I'm not rooted and do not want to tamper with the phone any further.

  Do not use the wireless eduroam network, or use only not my car stereo bluetooth seems to prevent the phone to stay awake.

  Now I get 1 or 2 days autonomy with screen of 3 to 4.5 hours in due time. But on average my phone lasts me easily with about 50-60% remining 1 day when I'm in bed.

• What's the legal system I bought without operating system?

  Hello

  I was looking to buy this system on ebay http://www.ebay.com.au/itm/9-7inch-Windows-7-Intel-Dual-core-Tablet-PC-2GB-RAM-32G-SSD-/221157069780?pt=AU_comp_laptop&hash=item337dfd13d4 and I noticed that the OS is supposed to be «not authentic but works well as a»?

  I have an original Vista of the retail and upgrade for windows 8, so I emailled to know if she is running the operating system that is appropriate with the intention to buy one with a blank HARD drive. Apparently, it does. Despite this, I felt that the seller was a little difficult to get direct answers to so I decided not to buy the device.

  I was in stores today and went to our local PC parts store and asked if they had some tablet PCs. Low and behold, they tell me they have this device without BONES. They show it to me and it is the same unit. From what I can tell, they bought one to test his spec out as a customer is interested in a number of them, and he sold now. As I said the HARD drive was BONE white, no doubt, so I bought it. Guaranteed complete (1 year) but cheaper, $70 Great!

  To get to my question. When turned on it still shows the Logo Windows 7 splash screen then gives the no boot device error. The drive is empty. It is part of its waste to the bios boot screen. Do I need to worry about this? What is an illegal use of windows left by the questionable BONE logo that has been deleted? Can I change?

  Thanks for your time.

  I just reinstall your original Vista on it and use it as a qualification for upgrade license to Windows 8.

• Reinstall Windows XP Home Edition 2007, version 5.1 (Build 2600.xpsp_sp3_gdr.101209 - 1647: Service Pack 3) after the failure of the hard drive and without operating system installation CD?

  I was using an old computer and now I have a new and I want to give the former to my nephew, but I want to wipe the hard drive completely clean, in order to get rid of personal information. I don't have the CD of Windows XP OS came with the computer. After the failure of the hard drive, how can I recover 2007 Windows XP Home Edition Service Pack 3? The computer that I'm talking about is 9 years old and is a Toshiba Satellite 1415-S173.

  Hi Bobby Collas,.
   
  You must have a copy of the installation CD without which you can not re - install the OS again.
   
  If it were an Original Equipment Manufacturer (OEM) installation, you can restore the factory settings. Contact the manufacturer to do the same.
   

• 1IZ satellite A200 with Vista crashes every day without no reason

  Hello guys,.

  I have a Satellite A200 with Vista Home Premium installed. In the past months, the BONE is suspended every day, I was not able to detect the reason. nothing is having replied to the questionnaire, not even Ctrl-Alt-Delete, the only solution is to stop from the power switch.
  I do not found something wrong in the system log, so I do not know what to do. Toshiba PC diagnostic shows everithing OK.

  What can I do? Perhaps a cooling problem? A guide for cleaning?

  Thank you.

  Hello

  So to be honest, it's hard to say what are the really causes your system to hang. Possible reasons:

  HIV 1-infected
  2 problem of file system Os including drivers, programms...
  3 had to be clean
  hardware problem 4

  I recommend:

  1 search for viruses
  2 reinstall the drivers (especially as a vga and chipset drivers). Check installed programs
  3 use compressed air jet to blow off the dust from the cooling module.

  If this does not help, do a fresh install of the operating system. Then we will see what to do

  Welcome them

• Satellite C660 - two USB Ports without function (bad connection)

  Hello, sorry for the worst English.
  Historically, the touchpad of my Satellite C660-220 used without operation, worked with a mouse of radio. Now, two usb ports can only be used under certain conditions. Can I replace the connections for this part (motherboard / motherboard) for example, a computer used toshiba laptop? Where can I read, one of which models the parts required are the same as well?

  Best regards from the Germany

  Bert

  Hi Bert

  I guess for you that it is quite simple. Problem is that this repair is not supported, and all we can try it on its own, including all the risks of damaging something.
  > Where can I read, one of which models the parts required are the same as well?
  This kind of document is not and if it has information that is not for public use, but for only authorized services.

  Theoretically, you can find the same mainboard with damage CPU or GPU and use parts from there.
  Believe me it is not easy to give you some good advice on this subject.
  Out of curiosity, but you have some experience with these things?

• tried to reinstall the operating system and it crashed

  Acer One Netbook D257.

  Installed to 2 g of RAM (you have to take all this goes to do!) and since then the wireless is uneven right next to the router unless.

  So, I thought it would be a pilot. Tried to install the driver from Intel. That didn't fix it.

  So I thought I would start fresh by reinstalling the operating system using the Acer tool that backs up the user's data.

  Wonder of wonders, it doesn't at all now! System 7 House is caput! He starts up a message saying that Acer could not install the OS!

  Suggestions? How can I get a copy of "acer" of win7 to replace on this netbook?

  TIA

  Ron

  Alrighty then, here is the resolution!

  Apparently, there is a removable rear on this computer! You must know the 'secret' to open the door!

  The 'trick' is to remove the keyboard, and then there are 5 magic screws that release the rear panel.

  There are two right under the disk hard corners L & R and then there are three online in the upper part of the hard drive. One of those is to the left of the upper-left corner (probably as he field key 'E'?) Once you do this, dislodging then the back is yet another task. Fortunately for me, I pushed inside to understand. There's "brand" in the plastic that indicate you the five. Just look at the two bottom and you'll see what I mean.

  The other thing to know is that the back side of the Panel has hooks that need to go first when back, which means that it is NOT the starting point of prying eyes. The other 3 sides are 'snap' as push so I think that starting with a front corner notches to stop might be the best solution, otherwise you will destroy the hooks.

  The problem with dropping the network was the antenna wires that connect to the transmitter. They were loose. They do not have much of a loop service for them so when I raised the mobo to install memory, the first time, they jumped off. The antenna is located around the monitor bezel.

  Now, it works fine.

  Why they have not make obvious to repair this unit is a mystery. I guess for $250, it's a deal, but then you get watered to have someone for you install memory.

  If all goes well, I saved someone some $ and headaches this announcement.

  Enjoy

  Ron

• If I update my motherboard I need to do a fresh install of windows

  I do not remember what was told, but I want to update my motherboard. I think I remember from somewhere because if you upgrade or change your motherboard, you'll have to do a fresh install of your operating system. In my case, it's Windows Vista Ultimate OEM. Is someone can he tell me what are my options?

  Hello

  you have 2 problems

  1. you usually reinstall vista after upgrading a motherboard as the operating system installed on the hard drive already has old drivers from the motherboard installed. so does not start

  2. you have an OEM license.

  An OEM license is linked to the original equipment installed on

  When the computer dies, the OEM license dies with him

  Contact the manufacturer of the computer and see if they are willing to do what you want

• EXECUTE IMMEDIATE and operator "AND".

  Please what is the problem with this because the error said Invalid operator relationship
  declare
  x varchar2 (20);
  
  Start
  x: = "Navy";
  address: = "Cairo";
  ID: = 4;
  
  EXECUTE IMMEDIATE 'update t1 set name =' | x |' where address: = v1 and id: v2 =' help to answer, id;
  
  end;
  
  
  but it works fine without operator AND
  declare
  x varchar2 (20);
  
  Start
  x: = "Navy";
  address: = "Cairo";
  ID: = 4;
  
  EXECUTE IMMEDIATE 'update t1 set name =' | x: ' if the address: v1 =' using address;
  
  end;

  EXECUTE IMMEDIATE 'update t1 set name =' | x |' where address =: id = and v1: v2' using answer, id;

  -There should not be ': =' must be '=' and ': should precede the variable equal not before.

• AIO HP 6000 Pro: hard drive HP 6000 AIO Upgrade questions

  I have a HP 6000 Pro AIO, which works fine, but I would like to put a hard drive more in for right now, I have a 250 GB drive.  I have a WD Black 1 TB disk into the machine, but it will not recognize the drive even after that the drive is cloned.  He tells me that readers may not be found.  When I check the disc, it displays the data that I cloned it.  Is their missing something I'm trying to migrate to the new drive?  Also, I tried to do a fresh install of the operating system.

  Hello:

  Your PC can suffer from this problem if you installed a hard drive sata III...

  http://h20566.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=3718645 & docid = emr_na-c02711513 & lang = to & CC = US

  I had a similar problem with my dc7800 CMT.

  I bought a WD Caviar Black 1 TB SATA III hard drive.  I managed to install the operating system, but when I want to start or restart the PC, most of the time (95%), I got the boot drive not found error.

  I assumed the reader was bad, so I RMA. by it, and the spare drive did the same thing.

  I have a HP 8200 CMT of Elite, which came with a Seagate 1 TB SATA III hard drive.

  For fun, I put this in my dc7800, and it worked very well.  He worked in this machine for over 3 years now without a hitch.

  I put the WD hard drive in my 8200 Elite and it has worked well in this PC, because there a sata III drive controller.

  None of our PC are shown in this document support, but the symptoms are the same.

• HP Pavilion m6 1090 - is: Beats Audio does not work (HP Pavilion m6 1090 - is)

  I misplaced the driver CD that came with my laptop, but I did not know until I had to do a fresh install of the operating system.
  I went for him still hoping I want to download the drivers on the internet and will not be a problem.
  
  ---------------------------------------------------------------------------------
  
  -The fundamental question is, HP did not provide drivers for Beats (IDT Audio Codec) Audio in the Windows 7 section.
  -The one provided under the article Windows 8 is 6.10.6433.0.
  
  I downloaded this and installed. It works fine until I have perform a normal shutdown of the system, every time I turn on my PC and actually reach the desktop, the system stops producing sounds later. I can hear his good Windows startup (that is before you get to the login screen) but no sound after I actually connect
  
  To resolve this problem, I always uninstall everything related to the IDT Audio Codec and then sounds back but the subwoofer of beats beneath my laptop works. The sound is quite low without the subwoofer, so I really need to install the drivers.
  
  I downloaded like 10 different drivers from the internet, tried all alone, but to meet the problem accurate even every time.
  
  I'm using Windows 7 Ultimate 64 bit. The exact model of the laptop is, laptop HP Pavilion m6 1090 - is.
  
  Please help me if possible.
  
  Kind regards
  Hannan.

  You are the very welcome.

  Here's what I recommend...

  Reinstall W7.

  And then install SP1 of the standalone download if your original installation of W7 does not include sp1.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5842

  Install these drivers in that order, then restart the PC after each driver is installed.

  1 chipset installation utility.

  2. AMD graphics card driver (this also installs the Intel HD graphics card, so it's the only one you must install).

  3 IDT Audio driver that I posted.

  4 Ethernet.

  Then, you can install the rest of the drivers in any order you want.

  I'm skeptical that the switchable graphics has your laptop works on W10.

  Some drivers W8 will work on W8.1, but some may not.

  In any case, first see if your laptop works OK even once with a new install of W7 SP1 and the correct drivers.

  If so, you can experiment with W8 and more recent here.

• How to get Windows XP in case of hard disk crash

  Hi, recently my hard drive got crashed and I lost my original Windows XP that came with my laptop pre-installed. I still have the key of Windows XP with me and I'm the only owner. Is their anyway to get it from Microsoft without any extra cost. Please let me know at * address email is removed from the privacy *.

  on laptops, operating system installation files are located on the hard disk, in a hidden place.

  These installation files can be launched / executed via a procedure known as 'factory restore '.

  a factory restore is then wipe the hard drive and install a fresh copy of the operating system of the manufacturer.

  Depending on the type of 'crash' you committed, you might be able to run a factory restore, but you will lose all your personal files too in the process.

  If the hard disk is still inside the laptop, then go into your mobile home site and look for the model number for instructions on performing a factory restore.

  either way, a hard drive crash is subjective interpretation.

  You may be able to fix it if you can borrow and xp cd from someone "or" via a startup disk that you can do on the internet.

  However, you will need to provide more information on your "crash."

• Windows 7 activation failed - 0xC004C008 error code

  Hello

  Back in 2011, I bought a new copy of Windows 7 Home Premium to upgrade my desktop computer.

  I had to replace the hard drive at the time, so it was a fresh install of Windows 7 on the machine (not an upgrade in itself)

  A couple of weeks, I had a new new office and think that because I already had a version authentic Windows 7 the disk, I might as well get a new machine without operating system and install Windows 7 top.

  It has been working well for about a week, but this morning I got a message saying that my version of Windows could not be validated. It's the complete error which is to come:

  Code: 0xC004C008

  Desription: The activation server determined that the specified product key cannot be used.

  Most of the support that I've read online indicates that Windows has been activated too many times, but I don't see how this is the case. To be clear, this is only the second time that the product key that came with my version of Windows 7 Home Premium has been used.

  I have to get Microsoft to put something else?

  Who should I contact?

  EDIT: I've seen instructions suggesting I need to activate by phone to make it work. However, I don't seem to have an option to activate by phone. All the instructions I have seen suggest right click on computer > select Properties > activate Windows now and choose to activate by phone. However, I have no option when I try these steps. The only options I have are activate Windows online now or ask again Me later. So I can't find the phone number of an Activation Center to the United Kingdom.

  EDIT 2: I'm sorry. Taken the lead. Figured it out myself! Thank you all the same.

  Thank you very much

  Neil.

  If you buy a "full version" of Windows 7, or even an "Upgraded" version, you are limited to having it installed and activated on one PC at a time.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Worldwide contacts: http://www.microsoft.com/worldwide/default.aspx

  J W Stuart: http://www.pagestart.com

• Smartphones blackBerry device software upgrade, does not (Bold 9930)

  Bold 9930, Verizon,.

  Everything was going well 5 hours ago. Backup and synchronization with Desktop Manager and everything was good. I clicked on the 'Device upgrade' link. He me everything first download and install the new Desktop Manager software. This seemed to work properly. Then it downloaded the new software device and conclusive to upgrade of the unit.

  7.1 bundle, 2705 (v7.1.0.991 platform 5.1.0.678)

  The Setup program indicates that the new software has been installed, and then it seems to want to reboot the device. The device never returns, ends with an App error 606.

  I loaded the cool device software, without change. Removed Software Desktop, loaded fresh, then loaded a fresh device software, without change.

  I tried to load my old device software but the Desktop Manager will not allow him.

  I reloaded software device 3 times, always the same behavior, always the same error at the end.

  I'm out of ideas.

  Any help?

  Hello and welcome to the community!

  brunostyle wrote:

  I tried to load my old device software but the Desktop Manager will not allow him.

  This bit is quite unusual... done correctly, you can force any OS on your BB package as long as it's your exact model number. So I'm not sure if you're really using all the good stuff... so, even if a lot of this will be redundant, please examine carefully for subtle tricks do you need to... done correctly, this can heal the situation. But any errors on the way (not ignored, stage not completed correctly, etc.) invalidates the whole process and translates the automatic process of support and limited to only the OS packages currently supported by your specific carrier.

  The easiest way is, on a PC (you can not do on MAC):

  (1) make sure that you have a current backup and your BB complete... you can find the instructions at the link in my auto-sig below.

  2) uninstall all the BB OS packages from your PC,

  (3) make sure you have the BB Desktop Software already installed

  • http://us.BlackBerry.com/software/desktop.html

  (4) download and install on your computer, the BB OS package you want:

  • http://us.BlackBerry.com/support/downloads/download_sites.jsp
  • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

  5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

  6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

  6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/how-to-reload-your-operating-syste...
  • Note Although written to "recharge" and the storm, it can be used to upgrade, downgrade or recharge any BB device model - depends on the operating system package you download and install on your PC.

  If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

  You can also study the use of BBSAK (bbsak.org) to perform the wipe what he is capable.

  You can also try the "skeleton OS Reload procedure" in an attempt to circumscribe the precise causal element:

  1. Load your OS "bare bones"... If everything is optional, do not install it.
  2. If the behavior is immediately, then try another OS with step 1
  3. If the behavior does not immediately, then run for as long as necessary to make you to be sure that the behavior will not occur.
  4. Add one more thing - no matter how tempting, one.
  5. If the behavior does not immediately present, and then runs for long enough to be sure he won't have the same problem
  6. Repeat steps 4 and 5 until all things are responsible or the behavior presents

  When the behavior shows up, you know the culprit... the last thing you have loaded.

  If the behavior doesn't re-present, then you know that step 1 or 2 cured it.

  If the behavior has anything, then you have probably a problem of material level for which no amount of OS or software can heal.

  You may also use these tips:

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State
  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

  • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

  Good luck and let us know!

• CF9 Windows 7 (32-bit) Setup Wizard Timeout

  CF8 works very well on my netbook Lenovo S10 - 2 as well on XP and now Windows 7. (Follow previously axes and re-axes instructions for IIS and Vista settings religiously). Pretty snappy performance actually on the 2 GB of RAM. Run Apache on XP and uses the latest IIS 7.

  CF9 almost works. Install goes very well, CF rises. However, post-installation Setup Assistant takes the admin login details and then consitently to expire. Extending the timeout via a parameter URL doesn't help; the thing is indeed mounted, do not use any what CPU, so it doesn't seem to be a performance problem.

  I tried several times; CF9 installation on a fresh copy of the operating system. On CF8. After uninstalling CF8. On itself. Same result.

  Has anyone else seen this phenomenon? Perhaps known issue?

  Yes, I know it is not "supported", but with Windows 7 to come like gang-busters, the developer edition will have to be at least.

  I try it with Apache, just for completeness. If I do, I'll post the results.

  I've yet to try Win 7, but based on where in the cycle of installation it is suspended, I'd say it's suspended installation of the ODBC function. Install ColdFusion without the ODBC function and see if it works. If it does and you need ODBC (and I can't imagine why Joe Developer needs), try to run the ODBC installation program manually.