From a stack

Similar Questions

• Satellite U940 - BT does not work after update from BT Stack

  Hello

  The bluetooth in my U940 Satellite with Windows 8, 1-update stopped working properly after I updated the Bluetooth Stack version: v9.10.32T because one of the programs pre-installed Toshiba told me to do.

  The option of connection / disconnection of Bluetooth in windows discovers tiles disappeared. There is no information on the bluetooth it more.

  Bluetooth seems to be installed and when I try to pair a bluetooth Toshiba bluetooth speaker Manager opens (until I could only connect the windows bluetooth devices). The connection with the speaker sometimes is done properly, but after you connect and reconnect the audio speaker is not passed over.

  I tried to reinstall the battery Bluetooth and then trying with an older version, but nothing works.
  Also, I tried to reinstall the filter of Bluetooth driver Package (bfdp - 20131011123106.zip), but the installation does not start when the files are extracted.

  Can someone help me to fix it?
  Thank you

  PS: The laptop is still under warranty, could it be refunded?

  Very quick and good solution.
  The key is that you can use BT again.
  Thanks for the comments.

• How to upgrade to the user interface of a screen that is extracted from the stack?

  Hello

  I am currently having a problem in the UI update.

  I have two screens called 'OverviewScreen' & 'DetailScreen' and in the upper part of the two screens, I have three buttons

  (i) back

  (II) next

  (III) charging

  In the entry of the app normally I posted the 'OverviewScreen' and in this screen, back, next buttons are inactive positions (just to have two sets of images, one active and one for idle) and if the user clicks on an item that is displayed in the cell, then I'll navigate the user to the "DetailScreen".

  Now the stack should have two screens,

  at the bottom - "OverviewScreen".

  at the top - "DetailScreen".

  and in the "DetailScreen" - I showed the image is active for the "back" button (because the screen is lower in the stack) and for the next inactive button image.

  Now if the user clicks the back button I navigates to the "OverviewScreen" which is called the UiApplication.getUiApplication (.getActiveScreen) (m:System.NET.Sockets.Socket.close ()); in the case of touch

  Now the "OverviewScreen" located in the bottom of the stack to the front UI (basically when I built it for the first time, it contains inactive images next and back) - what I want here is I need to show the following active image therefore needs to update the user interface of the screen that displays battery

  Because,

  OverviewScreen (back, next inactive images)--> DetailScreen (back - active, next - inactive)--> new OverviewScreen (should show the back - off, next - active)

  For this, I tried with what follows, but none works,

  If (event.getEvent () == TouchEvent.CLICK) {}
  UiApplication.getUiApplication () .getActiveScreen () .getScreenBelow () .updateDisplay ();
  UiApplication.getUiApplication () .getActiveScreen () m:System.NET.Sockets.Socket.close ();
  Returns true;
  }

  I even tried with invalidate() and dopaint() but none works

  However, I realized the functionality if I press the off button in the "OverviewScreen" he navigated me to the "DetailScreen", juice wants to show the icon active next button?

  What should I do to repaint or update the user interface of the screen here?

  Thanks in advance,

  Kitty.

  Found a solution

  Override the method which is found in the net.rim.device.api.ui.container.MainScreen and in this method, I have changed the image for the button and this method is called in the current active screen using getActiveScreen () .getScreenBelow)

• How to prevent from being stacked to the top in the windows taskbar?

  This occurs even if there is enough room for everyone and makes it harder to switch between windows.

  I'll try that. Thanks for the help.

• remove the screens from the stack

  I develop a secure application. So if screens are stored in the battery, then after the expiration of session or disconnection, if the user presses the button back (escape) and then the user can view other screens as the screens are sauteed one by one.

  Is it possible that when the user logs off or the session is expired, all screens are exploded out(or destroyed)

  UiApplication app = UiApplication.getUiApplication();
  while(app.getScreenCount() > 0) {
     app.popScreen(app.getActiveScreen());
  }
  app.push(Your Login Screen);
  

• Nokia 6275 & 6.82.22 software PC Suite on Toshiba BT Stack

  All,

  Someone had this problem... I guess it is a problem of Nokia... but wanted to see if anyone else had the question...

  Nokia 6255 to 6275i update Nokia PC Suite on Toshiba Tecra M4 v6.82.22, Windows XP SP2, Toshiba Bluetooth Stack v5.10.01 (T) on the Bell Mobility network

  OK... so everything was working fine with my Nokia 6255 on the config above. I have this created initially in autumn 2005 with Nokia PC Suite v6.7.21 and Toshiba Bluetooth Stack v4.00.23. Bluetooth to Nokia PC Suite worked well... functions... and so did Bluetooth Dial Up networking (DUN).

  Later upgraded both the battery Bluetooth Toshiba v5.10.01 and Nokia PC Suite for v6.82.22 and everything was still OK with the 6255.

  Then I got my new 6275i of Bell Mobility...

  Phone connect well with DKU-2 cable to PC Suite... its bluetooth that has problems...

  Tried to authenticate (pair) the 6275i with PC Suite via bluetooth... phone is visbile in the dialog box "search and select phone"... but trying to authenticate/pair it says either "cannot authenticate" or sometimes just "hangs" on the authentication step (although clicking on cancel still works).

  Note nothing happens on the phone at all during this process... so it seems (and subsequent control agrees) indicates a problem between PC Suite and battery Bluetooth locally on the PC.

  I tried pairing with toshiba software 6275i (it shows a Service on PC). It works very well in both directions (initating matching the phone or PC). But once connected the phone does not appear in the list of devices available PC Suite!

  So in frustration down ranked PC suite back to 6.7.21.

  I uninstalled all 3 components (Nokia "PC Connectivity Solution', 'Nokia PC Suite' and connective Nokia Cable Driver". A run Nokia PC Suite Cleaner v3.5 to get rid of registry ends etc. Kept the 5.10.01 Toshiba BT Stack version. ... Rebooted many times :-(

  This is the version of PC Suite could see the phone and authenticate... EVEN with the new version of the Toshiba BT stack does not support. Problem is that this version of PC Suite does not know the 6275i... so some functions do not work (as Syncronize!).

  It's interesting in the dialog box "search and select phone" from the older version of PC Suite, there are various icons showing the status of a device matching. Not paired not is an icon of phone combined with Toshiba stack but not PC Suite "authenticated" is a phone with a green check mark icon more, authenticated paired with PC Suite's phone with green Sidebar icon.

  Then, upgraded to 6.82.22 (just using the PC Suite Installer... did not uninstall). I had hoped to see the phone with the Green Sidebar icon because I had managed to authenticate the phone with the older version of PC Suite... but no dice.

  Back to the original problem, the phone does not appear in the dialog box "search and select phone" in Nokia PC Suite 'Manage connections' dialog... Since the twinning / authentication I did with 6.7.21 is still in effect! I see this by looking at the related devices by using the stack of Toshiba BT, Options, Security tab, "View paired" the 6275i is listed as a paired device.

  If I delete matching using this function in the stack from Toshiba, the phone appears again in the dialog box "search and select phone" of the PC Suite... but again I can't authenticate!

  Tried call Nokia to the Canada but sat on the phone for 60 minutes two times... and now I'm in the United States and Canada # 800 for Nokia does not work, sigh.

  So I read all the threads on this topic and tried everyone's suggestions with no succcess... anyone know
  1. is there a difficulty with PC Suite 6.82.22 I have not tried?
  2 what a problem with BT from Toshiba stack?
  3. when a new version of PC Suite will be released that works on my config?

  Hello

  1.), you are on the forum of Toshiba and PC suite is not developed by Toshiba. Therefore, you should ask the manufacture of phone for the patch, fix,.
  (2.) No, I don't think it's a problem of BT stack, because it works very well with the previous version
  (3.) check point 1.)

  PS: Have you checked this site Toshiba BT:
  http://APS.toshiba-tro.de/Bluetooth/

• After BT stack installation smartphone does not find 'BT ActiveSync' service

  After that I updated the new BT 4.20.1, my smartphone stack not found service 'BT ActiveSync' on my laptop.
  It cannot find "Serial Port".

  Here is my equipment.
  Laptop: Portege R100
  OS: Windows XP Professional.
  Smartphone: Dodpod S300
  Battery Bluetooth: 4.20.1
  Bluetooth SD IO: Toshiba Bluetooth SD Card3
  ActiveSync: 4.2

  Hello

  This is a problem that is typical If ActiveSync on the side of the PC is not running or not configured to COM7.
  The PDA - side BT Serial Port of the laptop will be detected as a Port of BT ActiveSync If ActiveSync is running and configured on the side PC.

  Explanation:
  The PDA will send the 'CUSTOMER' command on the serial port remote and if the response "CLIENTSERVER", the serial port will be detected as a sync Active BT Port

  The following registry key will assign COM7 Sync-port for the side AS PC:
  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
  "COM7 SerialPort"=""

  Please make sure that the BT from TOSHIBA stack is installed correctly. [START]-[Control Panel]-[Bluetooth Local COM], check if COM7 is designated as "LocalCOM Server".

  CU
  DM

• Impossible to install Toshiba Bluetooth stack

  Hello

  A few days ago, I bought a Bluetooth adapter, the drivers I have recived with is Toshiba Bluetooth stack v3.03.26.
  I tried to install it as it says in the manual, but every time the installation stops at 56% (for several hours) until I cancel it. I tried to insall drivers manually through the Device Manager, but whenever I get to the part that I have to choose the file Tosrfusb.inf, it is said that the INF has no information on my hardware. I looked for the identification of the Bluetooth - VID_0A12_0001 adapter and it the same as in the Tosrfusb.inf.
  I have XP SP2, the adapter works very well with the defult SP2 drivers, but I can't use all of its features with these drivrs. I tried to use your latest drivers v4.20.01 withuot no success.

  What should I do?

  Hello

  do not use the latest drivers on the TOSHIBA site, as these work just 30 days with your dongle.
  I guess there could be a propblem with the stack of BT MS installed on your system, which can prevent/interruption installation TOSHIBA BT Stack.
  So first of all, you should try to get rid of the stack of BT Ms.
  1 prevent the stack of BT MS reinstall: [START]-[RUN]-[move %systemroot%\inf\bth.inf % systemroot%\inf\bth.i]
  2. after that, he must remove the following registry keys: {you set permission first... right click on the registry key-> permissions...}
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\B TH
  and
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\B LENUM
  3. after that, remove the MS Bluetooth Device Manager devices
  4 reinstall battery of BT from TOSHIBA
  ==> It should work now

  There is a further point which could prevent the TOSHIBA BT Stack install correctly: you have installed a virtual Compote (USB2serial, mobile phone on the PC?) If Yes, remove this virtual COMport before install the BT from TOSHIBA stack.

  CU
  DM

• Adding to connect 6224 replacement for stacking

  Hello

  We just had a power connect 6224 replaced under warranty.

  -J' removed the stacking of the faulty switch module and installed in the new switch.

  -Power switch replacement and active stacking ports

  -Saved config, power off

  -Attached to the other switch in the stack with stacking cables

  -Powering new switch

  -Master restarted

  -Circuit breaker is backup and running normally, however the Member switch shows "code incompatibility?

  I tried to turn off the Member, remove the Member from the stack, and then restore power (I can not reset the master only outside the hours). But I still get the same code shift.

  Any suggestions?

  Looks like the firmware is not the same. Use the command > view version, to see what firmware the switches are on. The replacement switch must be on the same firmware as the pile. If they do not match, now may be a good time to get them all to date.

  http://Dell.to/1M7ulmk

  Tell us what you find.

• addition of 3750 to stack

  Hello

  I have two 3750 s stacked and a 3750 autonomous all in a data closet. Both have the same versions. I want to combine them to make a pile.

  Issues related to the:

  How can I force the stand-alone version to be the master? priority of SW 1 XX (Higher then the existing battery)?

  The battery and the standalone version have management addresses. It would be ok to remove the ip address of the stack? In this way, the standalone version (the master address will be the only address to management)?

  How can I connect the stand-alone version of 3750 to the battery? Currently, 3750 battery is connected via a waterfall from the stack port cable 1 to the top switch to the port of stack 2 switch at the bottom.

  Thank you, Pat.

  Well, what I got out of this thread, you wanted the stand-alone battery/switch to be the master, then add the stack 2 switch to autonomous battery/switch? I guess that's correct. I'm sure that if you set the priority of 15 it takes affect immediately, but I was able to deceive. But, setting priority to 15, putting in orders for the supply and configuration of the interfaces should be no downtime.

• Focus stacking in no. 2014 CC works more (mouth kick)

  I just spent HOURS on 2 different computers, trying to make the Focus Stacking for 2 jobs, I've been working on which I couldn't work. I used it just a couple of weeks without problem. (And yes I use the correct procedure: ) File > Scripts > load files into piles > attempt to Auto align > select all layers (in the layers panel) > edit > Auto layer blending > Images from the stack) Of course, I thought it was something that I was doing wrong, so I spent all this time trying to solve the problems on my end. Finally, I tried the cat help and spent another pile of time to reproduce the problem and make screen captures to show CSR only to find out that it's a known Adobe issue, and it could be solved in the next update. BTW, it was very obvious that CSR helps both a list of clients since it took so long between responses. How aggravating.

  
  

  Questionnaires here's the rant I left on one of their :

  So ask you "How can we improve the creative cloud? My answer is, INFORM YOUR CUSTOMERS of LOYAL when ago a PROBLEM WITH YOUR PRODUCT SO that THEY do not WASTE THEIR TIME TRYING TO FIGURE OUT WHAT's WRONG WITH THEIR SYSTEM. JUST AS A FEW MONTHS AGO, THE ISSUE OF HAVING TO CONSTANTLY CONNECT WHENEVER YOU LAUNCH A CLOUD CREATIVE APPLICATIONS.

  
  

  Is it really so difficult to do now that we're joined at the hips with this cost monthly creative cloud? I'm sure you'll let us know immediately if we do not have our monthly payment on the right?
  

  Photoshop 2014.2 is released today, and it solves known issues with Focus Stacking and Photomerge seams.

  -Christmas

• Premium HP: HP Premium: PROGRAM FOR DOING MATRIX OF BATTERY of the CALCULATOR (don't DO NOT WORK!)

  Hello!

  I attend the University for electrical engineering, and so I plan to buy a good calculator for my needs:

  -programmable with enough memory

  -graphical representation

  -"Advanced" math

  I have not discovered only recently on the amazing HP calculators (e.g. HP 50 g), which are capable of the RPN notation and thus make the calculations very fast and effective. I really hate the new calculators that announce the entry "quick and easy" using graphic symbols and cursor to select the location of the entrance! It of a lot of your time and makes me crazy, especially when it comes to long and "complex" calculations

  As I am not able to get the new HP 50 g, I looked at his "successor": first HP. But unfortunately there many defects in the RPN notation and also in some functions. But I'm willing to compromise, especially if I can write programs to replace some missing critical functions of HP 50 G.

  BUT, when I started looking into writing my own duties I quickly discovered that the lack of management functions of the inputs/outputs and even some strange/inexplicable behaviors.

  I wrote a program:

  EXPORT array()
  
  BEGIN
  
  LOCAL a, b, i, j;
  
  a: = years (1);
  
  IF length (a) == 1
  
    THEN
  
  b: = MAKELIST (years (X), X, a + 1, 2,-1);
  
    ON THE OTHER
  
  i: = a (1);
  
  j: = a (2);
  
  b: = MAKEMAT (years (i + j + 2 - J-(I-1) * j), i, j);
  
  END;
  
  (b) return;

  This program takes the last argument ("a") of stack for the size of the list/matrix.

  If the argument 'a' is a number (list 1 item), it creates a list of the last 'a' arguments from the stack. -> WORK

  Otherwise, it creates a matrix with columns and the specified lines. -> DOES NOT

  Now when I tested the code without I or J arguments MAKEMAT service, she worked OK. He worked too, if I used a very simple expression: for example I have J-1 or i + j - J + 2 (column only scanning).

  (The upper part (1 expression in the stack is the return value after execution of Array ()))

  OK LIST:

  

  MATRIX not OK:

  

  MATRICES OK, so current of enforcement only of years (i + j - J + 2):

  

  MATRIX OK, so current execution really simple Ans(I+J-1) function:

  

  Why these anomalies! I was really looking forward to buy HP Prime, but after all these issues and no real control on the stack of the calculator for the impressive programs

  HP 50 g has built in functions for these conversions, but more recent first HP does not work.

  All the best,

  Ziga

  And summarize the features of the program:

  Make a list of last wrote the number (one being 1: command):

  

  Make a matrix using a schema = {i, j} (a being list in 1: command):

  

  The array() function:

  EXPORT array()
  
  BEGIN
  
  LOCAL a, b, i, j;
  
  a: = years (1);
  
  (A) IF size == 1
  
    THEN
  
      b: = MAKELIST (years (X), X, a + 1, 2,-1);
  
    ON THE OTHER
  
      i: = a (1);
  
      j: = a (2);
  
      b: = MAKEMAT (years (i * j - J + 2-(I-1) * j), i, j);
  
  END;
  
  (b) return;
  END;

• remove the battery in edit mode

  In the editing screen (left SHIFT + down) how to take something from the stack and the echo in the editing program?  I used to use a 48sx and you can do it, but I don't see how on the 50g.

  Hi!, odobo:

  1) look, this sequence...

  Any expression... Press...

  Now you can see, the expression in the battery...

  Next step, press... You must see...

  Now you need, copy into memory... press...  and ...

  You need now, put in a program...

  Now, you need to press on...  and ... in left, arrow DEFROSTER indicated to the program...

  And now, you have to see...

  Note: this program you can now stored as a global variable, with any name, e.g.: key STO "PRB" and press.

  2) important: If you need to put the phrase in the show directly, you can use... Local variables.

  Example of local Variable:

  

• Satellite 5100, HID not supported!

  I have the problem that the MS Explorer Bluetooth Mouse is not supported by BT from Toshiba stack.
  Is there any way to make it work on my Satellite 5100?

  Hello

  you updated the BT stack to the latest version?
  _________________

  Toshiba had a clean section of Bluetooth can be reached at the www.toshiba-tro.de under Bluetooth.

  There, I found in "Testimonials" following the expression to MS BT Optical Mouse

  "The HID profile is not supported on the old Modules of SiW - BT and Digianswer PCCards"!

  Rudi Bye

• Re see the calculations in PRN

  I started a new topic because I did not want to resurrect a 7 year old thread, /t5/Calculators/Show-calculations-IN-PRN/td-p/1114989 #. VTMhppOFuo9.

  The im problem seen is I installed the program introduced in the post mentioned and followed the steps to the best of my knowledge, but the program doesn't seem to work on my 50g. The steps I have dones are

  copyed the program in the original file,

  Checked flag 62 and 63.

  I tried the ATTACH line, 256 but not too sure if I've done right.

  Someone out there with some knowledge able to help out me?

  Thank you

  Hello

  Have you RCL program from the stack and the STO as (the character of beta can be obtained by pressing F2 ALPHA, RIGHTSHIFT,).

  Parameters of the indicator:

  Claire - 55

  -set 62

  -set 63

  Claire - 95

  As mentioned, type 256 ATTACH (enter) [this must only be done once, so it should not be necessary to repeat]

  Doing the following:

  1 TYPE 2 +.

  should result in:

  

  I hope this helps.

  Best regards.