Satellite 5100, HID not supported!

Similar Questions

• Portege 4010, HID not supported

  He finds the mouse OK but fail to complete the installation.
  I get "Human Interface Device (HID) profile is not supported in this configuration" when I try to connect my MS IntelliMouse Explorer for Bluetooth. I have the latest version of the software of Toshiba (SD) and battery on my Portege 4010. Using the USB MS Bluetooth dongle on another computer (of office) everything works fine.

  Hello

  Maybe this site will help you?

  http://APS.toshiba-tro.de/Bluetooth/

  There are troubleshooting costs and info.

  Bye Bob

• Satellite A100 - signal not supported from PC to TV

  Hello

  I have a Satellite A100-SK8 I used to connect it to my Sony 40v2500 using a cable of AVG. However, recently it will no longer connect and I get the mesaage "signal not supported set the output to your pc" on the TV. I use the same cable to connect my another PC to the same TV and it works correctly.

  Any help is very appreciated!

  Thank you
  Shain_20

  Hi shain_20,

  Can you explain which is an AVG cable? I've never heard of this

  In any case, he s strange that he doesn t work then you change some parameters of display or any other driver/software driver?

  Maybe reinstall the display driver could help...
  Usually, you can switch between monitors using the FN + F5 key combination.

• My Satellite A100 does not support SDHC cards with the internal card reader

  Hello

  My Satellite A100 can't stand my sandisk 4 GB SDHC.
  'normal' SD cards are not a problem with the internal card reader, and there is no problem with the 4 GB sandisk SDHC card using an external card reader.

  is there a software solution?

  regrads,
  Itock

  I don't have the time to read the manuals for your model of laptop users, but can be registered to all supported cards. I guess SDHC not registered and not supported.

  I don't know what you mean with the software solution, but as far as I know, update for multimedia card reader is not available.

• Satellite C850 does not support external USB or CD

  Hello

  My C850 race that Windows 8 used to start perfectly to whatever option I chose.

  Recently, I decided to check my different recovery media and discovered that despite being boot sequence
  USB
  CD
  HARD DRIVE
  the machine will not start if the media drive or a Cd is inserted, I also used to get a line when booting saying something about the seizure of press F11 recovery console (I think), that option is also gone.

  I have disabled startup secure in the Bios and disabled fast start for Windows power options.

  Pointers appreciated.

  Note, it not to ignore the other boot devices and go straight to boot from the HARD drive, it just hangs and done diddly squat apart from the Num Lock to led lighting.

  Version of the BIOS V6.70
  ATI 2013 6514 (6528)

  Thank you in anticipation

  Stand by. You have created a recovery using pre-installed Recovery media creator USB support?
  A complete in Windows 8 stop. Put recovery USB to the USB port and start over for laptop but use F12 to get into the boot menu.

  USB recovery must be recognized, and you can choose USB as the first boot device.

• Satellite A200 does not support 4 GB SD card

  Hello...

  I have SD card problem. My computer read the 1 GB SD card but not read 4 GB SD cards. My operating system is vista Home premium. I test my SD card with the other laptop and it works.

  Thank you...

  Hello

  If your bed computer card of 1 GB but not 4 GB, this indicates a problem with the system to read higher capacity SD cards. for SD 4 GB capacity and above, there has been a change to the higher capacity SDHC cards, so, your system may need an update to fix this. to correct this problem, please install Service Pack 1 for Windows Vista or the update from the Microsoft Web site in the following link: http://www.microsoft.com/downloads/details.aspx?FamilyID=e42fc131-6a76-4b27-934a-fb19dd323dab&DisplayLang=en

  I hope this helps

• Satellite 5100: Driver CD does not work to recover the operating system

  My laptop Satellite 5100 did not work today. The whole system broke down, and I can not open any program. I want to recover my system but my CD driver does not work, I can not use the recovery CD to run the system.

  What should I do? Can I replace a new CD by myself? Is there another way to recover the system without the CD driver?

  Thank you very much and I look forward to hear from you.

  Hello Bingping :D (Lazy nickname)

  Well, first of all you are sure that the drive is dead or it of just not possible to boot from the recovery CD?
  Press the C key immediately after booting laptop (by pressing the power button) to boot from the CD drive.

  If it doesn t work so try to boot from the original Windows CD. Perhaps the Toshiba Recovery CD is damage. But if it is not possible to boot from a CD so I would say that the reader has a malfunction.

  Of course you can replace the car yourself. It of not very difficult, but you must be careful. Not every drive is compatible. The caught player support, you can order the Toshiba ASP in your country.

• Satellite 5100 501 and installation of Vista

  Hello!

  Is it possible to run Vista Business on 5100-501? No problem with drivers?

  WBR

  I can't say for sure if this is possible or not, but I know with certainty that the Satellite 5100 is not Vista supported for laptop and Toshiba will not offer a Vista driver for this older model laptop.

  If you test it please report results.

• Satellite C660 does not start on disc or USB

  My Toshiba Satellite C660-DSC0QE app, BIOS version 1.80, will not start Windows more - it just goes to the dreaded black screen with white cursor.

  I tried a system Win 7 recovery disk, a USB with software from Kaspersky on her recovery and even a full Win 7 installation disc, and it does not start at one of them.

  The boot order is set correctly, (optical drive or USB port) devices are read, but their initialization never actually in them - there is an obscure error message, or it acts like they weren't there at all.

  The obvious answer to these forums seems to be disable secure boot mode and then switch the to the CSM UEFI boot mode. Easier said than done - the menu options don't exist at all in my BIOS/CMOS screens.

  Finally, I see no way in the instructions to get a BIOS update occur without being already in Windows on the PC - http://aps2.toshiba-tro.de/kb0/HTD9502M10000R01.htm I'm assuming that the BIOS version 2.00 would have these options.

  Any help gratefully accepted!

  Hello

  I assumed that you have a white blinking cursor in the upper left corner.
  Is this correct?

  These symptoms appear where the system can not find a boot device (HARD drive) or memory problems (RAM module).

  First of all, you said that you have UEFI / CSM boot mode in the BIOS settings.
  So I m asking you what parameters of start mode appear in BIOS exactly?
  Find you these settings in the right area?
  Usually, you should have an area (tab) called security in the BIOS.
  In most cases, you will find a safe boot option, but the Satellite C660 does not support this option because it s too old.
  But the startup mode (UEFI /CSM) should be available in the BIOS. Check the settings in the BIOS of the system area

  Anyway, as I said above; It could also be a memory problem, so I recommend you to check if the memory is OK.

• Satellite R830-143 - update of the BIOS does not support this operating system

  Hello

  I received a notification via Tempro that he did not have a BIOS upgrade. I downloaded the ZIP file (bios - 20120209125153.zip), extract the package (BIOS360_EC140_WIN.exe) and ran it according to the instructions.

  The package runs, give the progress bar "extract files...". ", then displays a dialogue entitled"TOSHIBA BIOS package Ver.4.1.2"that says:"this package BIOS does not support this operating system."

  I am running Windows 7 Home Premium 64 - bit on a Satellite 830R-143 with the short part No. PT32LE

  Does anyone know what is the problem?

  Thanks in advance for your help...

  Hello

  You have problems with the laptop?
  If not then why you want to do the BIOS? Just because the new BIOS is released?
  I would not change anything if my laptop is running correctly.

  However, the update of the BIOS requires the VAP (value added package).
  So remember that this PPV is installed correctly. If this isn't the case, so far.

• Windows 10 not supported for Satellite U940

  I have a U940 satellite. I've had it for over 3 years and I like it.
  Last weekend I went to the update free for WIndows 10 and updated level to her with my Windows 8.1.

  It works, but now I've discovered (maybe I should have read) that the Satellite U940 is NOT a device supported for Windows 10.

  Why is this?

  I plan to go back to 8.1, but for now the 10 Windows works for me.

  What will that mean for me long term and which leave people?

  Thank you very much!

  As you probably know that it is not possible to provide full support for all models of laptops. On some point of Toshiba, and other manufacturers must create a furrow, and decide which models will be more sustained.

• Satellite 5100-201: five keys: ' 9-O - L-.-Del "do not work

  Hello!
  I am owner of a Toshiba Satellite 5100 201. The five keys 9-O - L-.-led on the keyboard do not work. Is it a software or a defect of the keyboard control problem or a problem of contact on the map? Does anyone have experience with this problem? Can it be a BIOS problem? I have Bios 1.90.
  Can someone help me?

  Best regards
  Ulrich

  Hello

  in most cases, the problem is that there is some dirt on the contacts of the keys.
  You must remove and clean and check the connector of the keyboard.
  If this help not the keyboard probably is defective and must be replaced.

  Good bye

• Satellite L650 und Windows 10 error: this CPU is not supported

  Hello

  I have the satellite L650 not modelsk1ja-0e8017

  Recently I have continually mistake to Get windows 10 app 'this CPU is not supported.
  I try by activation and deactivation of NX bit, but it does not work. When will you provide new bios after the version 2.4 of the BIOS?

  I read on the similar message on CPU is not compatible with the new system Windows 10.
  Obviously this is a bug in software and it would be already solved Ms.

  I recommend you to check the updates system available for download and installation, install all Windows patches, reboot the laptop and re-run this tool from Ms.

• Satellite A300 - 1 5 ACPI is not supported under Linux

  I have laptop Toshiba A300 - 1 5. When I run Windows absolutely everything works fine.
  But when I boot Linux (I tested the two 8.10 of Ubuntu and Fedora 10), Fn keys does not work.
  Neither is bluetooth, which is a USB hidden and disabled by default.

  I noticed that pilots * toshiba.ko* and * toshiba_acpi.ko* cannot be loaded.
  I tried to load them, but both * dmesg * and said */var/log.messages*: * {color: #000080} not a cell phone supported. {color} *.
  I also tried to use * toshset, toshutil, fnfx *, but they all need * / dev/toshiba * and * / proc/acpi/toshiba * or * / proc/toshiba * exist.
  And it is impossible to load them, because the cell phone is not supported.

  I have two questions:

  1 Toshiba plans to cooperate with suppliers of Linux in order to fix this bug.
  I have visited many Linux forums and many people's complaint they have keys functional unfunctioning under Linux.
  So, I think that if the product is thrown on the market, it must be supported, is it not?

  2. How can I temporarily fix this bug to get the missing functionality before the next version of Ubuntu or Fedora? Can someone advice any solution.
  (Well, please don't say: leave Linux and use Windows.) I want to use Linux, not Windows. "And I want a job in the same way).

  If you want additional information about a bug, I will provide.
  Thank you very much.

  Hello!

  I have a Toshiba Satellite A300 - 1 M 1 PSAGCE under Ubuntu Intrepid (kernel 2.6.27.11).

  _I realized that only Ricoh SD/xD Card does not work (it worked on VIsta). _

  Anything else is OK.

  I think that our laptops are related, take a look at my ACPI and journal modules.

  Bq. + $ lsmod | grep acpi +------+ 16400 1 acpi_cpufreq +------+ freq_table 13568 3 acpi_cpufreq, cpufreq_stats, cpufreq_ondemand +------+ 4 47800 acpi_cpufreq processor, thermal +.

  Bq. + $ ls/proc/acpi / +------+ battery dsdt event fadt fan info power_resource processor embedded_controller ac_adapter sleep thermal_zone wakeup video +.

  Bq. + $ dmesg | grep-i acpi +.
  Bq + BIOS-e820: 00000000bfe86000 - 00000000bfebf000 (ACPI NVS) +------+ BIOS-e820: 00000000bfeee000 - 00000000bfeff000 (ACPI data) +------+ ACPI: USE 000FE020, 0024 (TOSINV r2) +------+ ACPI: XSDT BFEFE120, 0064 (r1 TOSINV TOSINV00 1 1000013) +------+ ACPI: FACP BFEFD000, 00F4 (TOSINV TOSINV00 1 MSFT 1000013 r4) +------+ ACPI: DSDT BFEF1000, 7745 (r1 TOSINV TOSINV00 1 MSFT 1000013) +------+ ACPI: FACS BFE93000, 0040 +------+ ACPI: HPET BFEFC000, 0038 (r1 TOSINV TOSINV00 1 MSFT 1000013) +------+ ACPI : APIC BFEFB000, C 006 (TOSINV TOSINV00 1 MSFT 1000013 r2) +------+ ACPI: MCFG BFEFA000, 003 c (r1 TOSINV TOSINV00 1 MSFT 1000013) +------+ ACPI: ASF! BFEF9000, 00A 5 (r32 TOSINV TOSINV00 1 MSFT 1000013) +------+ ACPI: SLIC BFEF0000, 0176 (r1 TOSINV TOSINV00 1 MSFT 1000013) +------+ ACPI: BOOT BFEEF000, 0028 (TOSINV TOSINV00 1 MSFT 1000013 r1) +------+ ACPI: SSDT BFEEE000, 0655 (r1 PmRef CpuPm 3000 20051117 INTL) +------+ ACPI: DMI detected: Toshiba +------+ ACPI: PM - timer IO Port: 0 x 408 +------+ ACPI: address Local APIC 0xfee00000 +------+ ACPI: LAPIC (acpi_id [0 x 01] lapic_id [0x00] activated) +------+ ACPI : LAPIC (acpi_id [0x02] lapic_id [0x01] activated) +------+ ACPI: LAPIC (acpi_id [0x03] lapic_id [0x00] disabled) +------+ ACPI: LAPIC (acpi_id [0x04] lapic_id [0x00] disabled) +------+ ACPI: IOAPIC (id [0x04] address [0xfec00000] gsi_base [0]) +------+ ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) +------+ ACPI : INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 level) +------+ ACPI: IRQ0 used by substitution. +------+ ACPI: IRQ2 used by substitution. +------+ ACPI: IRQ9 is used by substitution. +------+ ACPI: HPET id: 0x8086a201 base: 0xfed00000 +------+ Using ACPI (EMAC) for SMP configuration information +------+ ACPI: Core review 20080609 +------+ ACPI: looking for initramfs Custom DSDT +------+ ACPI: bus type pci registered +------+ ACPI: EC: pick up at CBS in the DSDT +------+ ACPI: _OSI (Linux) ignored by DMI BIOS query +------+ ACPI: active interpreter +------+ ACPI: (supports the S0, S3 S4 S5) +------+ ACPI: IOAPIC using for interrupt routing +------+ ACPI : EC: non-query interrupt received, switch to stop mode +------+ ACPI: EC: Storm detected GPE, transactions will use polling mode +------+ ACPI: EC: GPE = 0x16, I/O: / order = status 0 x 66, data = 0 x 62 +------+ ACPI: EC: pilot started in interrupt mode +------+ ACPI: PCI [PCI0] root bridge (0000:00) +------+ ACPI: PCI Interrupt Routing Table [\_SB_. PCI0._PRT] +------+ ACPI: PCI interrupt Routing Table [\_SB_. PCI0. P32_._PRT] +------+ ACPI: PCI interrupt Routing Table [\_SB_. PCI0. EXP1._PRT] +------+ ACPI: PCI interrupt Routing Table [\_SB_. PCI0. EXP2._PRT] +------+ ACPI: PCI interrupt Routing Table [\_SB_. PCI0. EXP5._PRT] +------+ ACPI: PCI interrupt Routing Table [\_SB_. PCI0. PEGP._PRT] +------+ ACPI: PCI interrupt link [INKA] (IRQ 3 4 * 5 7 9 10 11 12) +------+ ACPI: PCI Interrupt Link [LNKB] (IRQ 3 4 5 7 9 10 * 11 12) +------+ ACPI: PCI interrupt link [LNKC] (IRQ 3 4 5 7 9 10 * 11 12) +------+ ACPI: PCI Interrupt Link [LNKD] (IRQ 3 4 5 7 9 10 * 11 12) +------+ ACPI : PCI Interrupt Link [LNKE] (IRQ 3 4 5 7 9 10 11 12) * 0, disabled. +------+ ACPI: PCI Interrupt Link [LNKF] (IRQ 3 4 5 7 9 * 10 11 12) +------+ ACPI: PCI interrupt link [LNKG] (IRQ 3 4 5 7 9 10 * 11 12) +------+ ACPI: PCI interrupt link [LNKH] (IRQ 3 4 5 7 9 10 * 11 12) +------+ ACPI: power resource [FN00] (on) +------+ pnp: ACPI PnP init +------+ ACPI: type pnp registered bus +------+ pnp: ACPI PnP: found 8 devices +------+ ACPI : Type of non ACPI pnp bus +------+ PCI: use ACPI to IRQ routing +------+ ACPI: RTC may wake from S4 +------+ ACPI: [fan] (on) +------+ ACPI: SSDT BFD77C18, 026 (r1 PmRef Cpu0Ist 3000 INTL 20051117) B +------+ ACPI: SSDT BFD75598, 0537 (r1 PmRef Cpu0Cst 3001 20051117 INTL) +------+ ACPI: CPU0 (power States: C1 C2 [C1] [C2] C3 [C3]) +------+ processor ACPI0007:00: registered as cooling_device1 +------+ ACPI : processor [CPU0] (supports 8 throttling States) +------+ ACPI: SSDT BFD76E18, 01CF (r1 PmRef ApIst 3000 20051117 INTL) +------+ ACPI: SSDT BFD77F18, D 008 (r1 PmRef ApCst 3000 20051117 INTL) +------+ ACPI: CPU1 (power States: C1 C2 [C1] [C2] C3 [C3]) +------+ processor ACPI0007:01: registered under cooling_device2 +------+ ACPI: processor [CPU1] (supports 8 throttling States) +------+ ACPI : transition device [FAN] to D3 +------+ ACPI: thermal Zone [THRM] (44 c) +------+ ACPI: Power Button (FF) [PWRF] +------+ ACPI: Power Button (CM) [PWRB] +------+ ACPI: lid switch [LID0] +------+ ACPI: battery [BAT0] (battery present) +------+ ACPI: AC adapter / CC [ADP0] (online) +------+ peripheral acpi: 1B: registered under cooling_device3 +------+ ACPI: Video Device [VGA] (multiple heads: Yes Rome: no message: no) +------+ iwlagn 0000:03:00.0 : state changes by ACPI to D0 + power------+ ACPI: WMI: responsible Mapper +------+ iwlagn 0000:03:00.0: state changes by ACPI to D0 + power------+ ACPI: EC: lack of confirmation, cut the interrupt mode. +

• Material of A100-529 - update driver ATI - satellite not supported

  Hello

  I have Toshiba Satellite A100-529. It has ATI Radeon Xpress 200 M graphics (integrated on board). Driver Toshiba being old (02.2005) I would like to update. I went to the ATI site, downloaded driver for my pilot x200M (last 7.1) and...
  WHEN install he said I have hardware that is not supported by this driver...? ! ? ! ? !
  I've tried everything. First uninstall the old driver - nothing. According to an older version of the driver ati 6.7, 6.8, 6.12 - nothing. the same error. Then I tried the driver for the ati card normal - nothing, next ati mobility driver - the same - hardware not supported?

  I'm depressed. A week ago, and I can't update my ati card driver. I even tried the so-called MODTOOL - for some other laptops. NOTHING!

  Help, please!

  It is important for me!

  Hello

  Try the driver for Satellite A110 (PSAB6). It is also not the most recent one, but better then your old.

  Good bye