Adding to connect 6224 replacement for stacking

Similar Questions

• Vista goes to 50% CPU usage and connects the computer for hours after the beginning

  Original title: Vista processor

  Stupid Vista goes to 50% CPU usage and connects the computer for hours after the start.  Cannot run anything with any request of CPU without getting bogged down and crashing.  It is not windows defender, I suspend this service and the machine is ok for another 1/2 hour, them I'm up to 50% of the CPU.  The idle process said Task Manager is > 90%, still indicates 50% CPU usage and the cooling fan looks like a 747 taking off.  Should I just pull the machine and go for Linux, or what?  Cannot run games or whatever it is, totally disgusted with vista of POS and microsoft can it Deep and do not get windows 7, it is probably worse.  Is that all I can turn off to get the same performance than, say, windows 3.1?  It would be preferable to the current situation.  MSCKMA.

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Cannot connect blue ENV3 for Compaq Vista laptop

  In recent weeks, my phone, when plugged into my laptop Compaq with Winows Vista, is recognized as an unknown device. Before a few weeks ago, my cell phone from Verizon enV3 blue connected very well and I have acquired more than 400 songs on the sd card on my phone without many problems at all.  I know this isn't my phone that has the problem because I replaced it a few days ago with a new phone from Verizon enV3 blue cell phone to try to resolve the problem, and it still wouldn't work.  It is also not the cable that I use, which also allows to connect my phone to my adapter to recharge, connect my phone to my laptop because the local Verizon store, the person who helped me was used two of the same type of cell phone chargers and the same message came on my phone , who did on my charger, so I'm pretty sure that's not the cable.

  That leaves my laptop as being the owner of the problem. He is never asked a driver to connect my phone to my laptop until the problem occurred a few weeks ago.  I thought I downloaded two drivers for it to work, but neither helped. So is there something that I'm supposed to do to connect the driver for my phone or what? I desperately want to get more music on my phone! Ask if you need more details and thank you in advance for responding!

  * original title - my phone, when plugged into my laptop, is recognized as an unknown device, so it does not synchronize with windows media player. *

  Hi Jorcar316,

  Please see the link next to the Web from LG site:

  http://us.lge.com/support/download/search/1000000314_EN_SO_.jhtml

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Best Practice Guide for stacked N3024 switches

  Is there a guide to BP for the configuration of the 2 N3024s stacked for the connections to the server, or is the same eql iscsi configuration guide.

  I'm trying to:

  1) reduce to a single point of failure for rack.

  (2) make good use of LACP for 2 and 4 nic server connections

  (3) use a 5224 with it's 1 lacp-> n3024s for devices of unique connection point (ie: internet router)

  TIA

  Jim...

  Barrett pointed out many of the common practices suggested for stacking. The best practice is to use a loop for stacking and distributing your LAG on multiple switches in the stack, are not specific to any brand or model of the switch. The steps described in the guides of the user or the white papers generally what is the recommended configuration.
  http://Dell.to/20sLnnc

  Many of the best practices scenarios will change of network-to-network based around what is currently plugged into the switch, and the independent networks needs / requirements of business. This has created a scenario where the default settings on a switch are pre-programmed for what is optimal for a fresh switch. Then recommended are described in detail in white papers for specific and not centralized scenarios in a single document of best practices that attempts to cover all scenarios.

  Express.ypH N-series switches are:
  -RSTP is enabled by default.
  -Green eee-mode is disabled by default.
  -Frother is enabled by default.
  -Storm control is disabled by default.

  Then these things can change based on the towed gear and needs/desires of the whole of society.

  For example, Equallogic has several guides that recommendations of configuration detail to different switches.
  http://Dell.to/1ICQhFX

  Then on the side server, you would like to look more like the OS/server role. For example a whitepaper VMware that has some network settings proposed when running VMware in an iSCSI environment.
  http://bit.LY/2ach2I7

  I suggest making a list of the technology/hardware/software, which is used on the network. Then use this list to acquire white papers for specific areas. Then use these white papers best practices in order to ensure the switch configuration is optimal for the task required by the network.

• Connect 6224 VLAN routing and management VLAN

  Happy holidays all the world-

  I read several posts here and elsewhere on the inability of the 6224 to deliver its own management interface. OK, enough, I get it. But what I don't understand is a practical solution to what seems to be a huge problem if you want to use the network to connect to the device to manage (instead of the serial console port).

  Let's say I want to have three networks A, B, and C on the 6224 and configure it to route between any combination of them. Let's call them VLANS 1, 2, and 3. Three ethernet cables will connect to three ports on the 6224. for the network A, b and C. Let's just ignore shifts and redundant connections to do this.

  The management VLAN can not be assigned to one of these networks, right? He said in the documentation, and it turns out if you try to do it on the configuration of the switch. It doesn't let you do.

  So, how do you reach the 6224 for management? Create a fourth network, VLAN 4? This seems to be the general theme of the answers to questions like that, but how do you reach this seemingly isolated network? By definition, it cannot be routed. Any computer that you normally use on A, B or C, can not reach D.

  So what then? A dedicated computer for D who cannot reach the other thing than the switch management port? What about another completely separate router (I have a Cisco ASA with some ports to spare, or a hint of irony, an another 6224!) to provide a connection between D and a networks normally used? This is crazy.

  Of course, missing me something here. I can't believe that the answer is, 'If you enable routing, the management interface is essentially unusable"but that's what it looks like, from my possibly twisted point of view. I want to have my laptop computer and any other computer, sitting on a network that can be put to rout by the 6224, and for that same laptop also be able to reach this same 6224 management interface.

  Someone please help me understand this?

  Thank you

  Chris

  PS: I have an email address. It is almost unique on the entire planet. I use it to connect to this forum. But Dell, like so many others, insists on ignoring these facts and let me create an another unique identifier while playing a game of 20 questions. That's why my remarkably stupid random username.

  Thanks again, and I hope that someone gets at least a good laugh over this.

  Vlan management can be considered as a port OOB. If the intention is that it be separated from the rest of the traffic and on its own dedicated network. However, you are not limited to manage the switch through just the interface vlan management. Each VLAN with an IP address can be used by customers in this vlan to manage the switch.

  For example, if you assign a VLAN 2 address and ip 192.168.2.1. Customers in VLAN 2 with and the 192.168.2.x subnet ip address can access 192.168.2.1 to manage the switch, while being able to communicate with clients in other VLANs.

  I hope this helps some, let me know if you need help on your config, or to specify anything.

  Thank you

• connect the m6220 switches stacked to existing Lan infrastructure

  I need to connect two powerconnect M6220 to LAN infrastructure existing.

  The switch of two are configured in the stack.

  Which is the best way to uplink the new switch to the other two powerconnect 5548.

  The old switch are not stacked and bound together by two 10GB Ethernet cable (one of the links is disabled).

  I need to implement the network tolerant to failures, maybe I need to configure the tree covering weight on the two links of 10 GB.

  I use Spanning tree to configure the uplink between the old and the new, too?

  Is there a better alternative? There is another way to prevent the loop network?

  Thanks, Francesco

  You have a few options.

  1. you can simply connect the cables between the M6220 switch stack and the 5548.  Set up a trunk connection which allows for VLAN needed overall.  Tree covering weight until it is enabled on the switch and not off on specific ports connecting the default switches prevent loops and allow the most profitable link to be active, leaving the second connection as an alternative link in a blocking state.

  2. you can configure LAG (aggregation of links).  This is where you configure the individual physical ports in a virtual port channel.  This indicates a covering tree to treat multiple physical ports as a single link aggregated to the other switch.  You will need to have the port at each end of the connection channel mapping. (On each switch).  This allows the same speed but more flow.  To move traffic more.

• Access to the use of memory and processing power charge connect 6224 via SNMP.

  Hi support them

  Is it possible to access the use of memory and processing power charge connect 6224 via SNMP? If possible, should the mib I use?

  Thanks in advance

  Rogerio

  When looking through the available MIB found in the zip file for download of the latest firmware.  I see that the MIB fastpathswitching mentions 'agentSwitchCpuProcessGroup '.

  MIB fastpathlogging has 'agentLogInMemoryConfigGroup '.

  There is no reference document material about what offer different MIB.

  I hope this helps.

• Replacement for the preview handler host has stopped working

  When creating a shortcut which connect to the network share. It can connect to get the file and it will have the following error message:

  Replacement for the preview handler host has stopped working

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: prevhost.exe
  Application version: 6.1.7600.16385
  Application timestamp: 4a5bc5ca
  Fault Module name: hooknt.dll
  Fault Module Version: 1.52.0.0
  Timestamp of Module error: 49a 20833
  Exception code: c0000005
  Exception offset: 0000b 951
  OS version: 6.1.7600.2.0.0.256.48
  Locale ID: 3081
  Additional information 1: 0a9e
  More information 2: 0a9e372d3b4ad19135b953a78882e789
  Additional information 3: 0a9e
  Additional information 4: 0a9e372d3b4ad19135b953a78882e789

  Does anyone know how to avoid it?

  Hi Ivan 2008,

  You can try the network drive mapping & check if it helps.

  Create a shortcut to (map) a network drive

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Voice of Lync hosted pbx replacement for Jajah solution?

  There is only one company that supported the voice connection with hosted voice (P3) package offered by Microsoft called Jahjah Lync.

  Quality of Jahjah has not maintained the market and so they stopped providing the service.

  Now, there is no replacement for same.

  Does anyone know if there is a solution for this or what to do in this case?

  I asked the support team for Lync hosted solution voice as part of Office 365, taken care of by Wipro - but they have no solution. Microsoft just offer good credit of $50 for Skype, but do not offer an alternative solution.

  I started this service and have paid for it, but have not been able to use it at all until that day!

  There are technical problems that Microsoft products are marketed and sold-same with O365 Microsoft taken in charge by Wipro

  Hello

  I would ask post you your query in the TechNet Forums, Lync is supported by the TechNet Forums.

  Please see the link to the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/ocsvoice/threads

  I hope this helps. For the Windows questions or issues, please get back to us. We are here to help you.

• replacement for the vRA certificate error 7

  Facing a problem when replacing the certificates on the web server of IaaS. I have replace the cert in the vRA device and I get the error "certificate with thumbprint {footprint of} not found in the store." I checked and the certificate was certainly added to the web server, IaaS. I even changed the binding of IIS on the web server to use the new certificate and that represented the process unit of vRA, and I got the same message.

  

  I worked with support about this and they did not even try to troubleshoot the update via the VAMI cert. They had me to do it manually using essentially the same steps as 6.2 (although there is a new URL) - http://pubs.vmware.com/vra-70/index.jsp#com.vmware.vrealize.automation.doc/GUID-91B9E89E-206B-4B1C-983D-D58A1CEDA7B4.html

  I know that this does not really solve the root cause of the problem, but at least if you come across this thread, you will know how not to waste time trying to work through the VAMI.

  Update 09/07/2016

  The link of vRA 7 above no longer works and I'm unable to find a replacement for vRA 7. However, the steps are the same as if documented for vRA 6 which can be found here: http://pubs.vmware.com/vra-62/index.jsp?topic=%2Fcom.vmware.vra.install.doc%2FGUID-91B9E89E-206B-4B1C-983D-D58A1CEDA7B4.html

• Connect or Skype for business: a comparison

  Asked to assess the possibility of using new Skype for business of Microsoft as a replacement for Adobe Acrobat Connect Pro. I use Connect for years, but I've never used Skype, Lynk, or this amalgam of new Microsoft including in their suite Office 365. Can someone give me advice on how they compare and contrast? What are the benefits of Connect? What are the disadvantages of Skype for business?

  It can be a difficult comparison, and you probably won't find much out there. I would like to start with this, the Gartner report for essential capabilities for Web conferences, where all the important tools are compared. Essential for Web conferencing capabilities

  From there on, I would say (as a user of Skype and Connect) are here where I see similarities and differences.

  Similarities:

  • They have the chat feature
  • Both can make VoIP audio
  • They both can track share (except the Windows version 8 Skype App may not)
  • Both can be used to share files, but how they do it is different
  • Both can record sessions

  Differences

  • Skype would require an installation for all users (Skype must be installed to use it)
  • Connect requires no installation (does not require a web browser and Flash 11.2 or newer to be installed that 98 + % of computers have installed)
  • Connect has more functions and the ability to create custom applications to run in a Connect meeting room
  • Skype is a good internal communitcations (IM) tool for businesses
  • Connect is a web collaboration tool good

  I'm sure the list can grow, but ultimately my oppinon is that they are two applications that meet the needs of different companies. For the past 8 years, I used two tools, but not found any time where I didn't know what tool would be best for my needs. If I need to have a quick chat or conversation with a colleague, I would like to use Skype. If I needed to have an interactive session with someone, I would like to use Connect. Webinars, I would use Connect.

  Just my $0.02

• Replacement for trust Mac Pro early 2008

  Hello

  Looking for a replacement for my very reliable and expandable Mac Pro early 2008.  I got it in 2009 after the death of my PC and on the eve of Apple, highlighted the 2009 model.

  Looking for a replacement and do not know whether to go for high spec 27 "iMac or Mac Pro.  Welder instead of videographer professional seriousness.  All I get will be faster than the current Mac Pro despite many improvements over the years.

  Thank you

  Matt

  As an amateur, I think you should seriously consider any movement until the 2009 model or later. Same factor form except the processor and RAM are on a shelf at the bottom of the Cabinet.

  They are faster because of some of the architecture changes, accept more RAM and still have the PCIe slots that allow you to add upgrades.

• All of a sudden, after a update of firefox, I get "this connection is untrusted" for Facebook, no matter if I use http: or https:, WHY?

  All of a sudden, after a update of firefox, I get "this connection is untrusted" for Facebook, no matter if I use http: or https:, WHY? Here are all the details of the error message:

  This connection is Untrusted

  You asked Firefox to connect safely to facebook.com, but we cannot confirm that your connection is secure.

  Normally, when you try to connect safely, sites will present a reliable identification to prove that you're in the right place. However, the identity of this site cannot be verified.
  What should I do?

  If you normally connect to this site without problems, this error can mean that someone is trying to impersonate the identity of the site, and you should not continue.

  This site uses HTTP Strict Transport Security (HST) to specify that Firefox didn't connect safely. As a result, it is not possible to add an exception for this certificate.

  Facebook.com uses an invalid security certificate.

  The certificate is not trusted because the issuer certificate is unknown.

  (Error code: sec_error_unknown_issuer)

  (Also included a screenshot).

  COR - el said

  You can check the date and time and time zone in the clock on your computer: (double) click on the clock icon in the Windows taskbar.

  • https://support.Mozilla.org/KB/secure+connection+failed

  You can retrieve the certificate and check details such as WHO issued the certificates and the expiration dates of certificates.

  • Click on the link at the bottom of the error page: "I understand the risks".
  • Let Firefox recover the certificate: "Add Exception"-> "get certificate".
  • Click on the button "View" and inspect the certificate and the Coachman, who is the issuer.

  You can see more details like the intermediate certificates that are used in the Details tab.

  If you cannot inspect the certificate by "I understand the risks", then try this:

  Open the chrome URI by pasting or typing this URI in the address bar to open the window "Add the Security Exception" and to check the certificate:

  • chrome://pippki/content/exceptionDialog.XUL

  In the field location type and paste the URL of the Web site

  • retrieve the certificate via the button 'Get certificate '.
  • Click on the "view..." button. "to inspect the certificate in the certificate display

  Check which is the issuer of the certificate.

  You can get more details like the certificate chain in the Details tab of the certificate display.

• is thunderbird a total direct replacement for outlook using W8.1

  Want to swop to / 2nd hand PC, W8.1 & outlook, outlook is uncertain and I don't know the user name and password to complete. Microsoft account as uncertain. Can I load Thunderbird as a complete replacement for outlook account /Microsoft?

  If so, can I access my old address present .@sky (POP)

  as I am somewhat a thicky, please speak simple English

  Yes Thunderbird with the module of calendar he is a replacement for outlook.

• Best replacement for 19 C he's the closer?

  What is the best closest replacement for 19 C he's?

  Thank you!